Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.4 LAccepted-Finance KALYANESWARI PASCHIM BARDHAMAN WEST BENGAL | KALYANESWARI | PASCHIM BARDHAMAN | WEST BENGAL | L1 | Accepted-Finance Offered lowest rate. | |
| 2 | L2₹27.5 L+₹13,660.37 (0.50%)Rejected-Finance R C PANDIT LANE NAMOPARA PURULIA | PURULIA | PURULIA | WEST BENGAL | 723101 | L2 | Rejected-Finance Higher than L1. | |
| 3 | L3₹27.6 L+₹24,617.17 (0.90%)Rejected-Finance 266 1 S B GORAI ROAD BESIDE VIDYASAGAR MAIDAN ASANSOL 713301 | ASANSOL | BURDWAN | WEST BENGAL | 713301 | L3 | Rejected-Finance Higher than L1. |
Tender Value
Refer Docs
EMD Value
₹56,450
Closing Date
25 Jul 2022, 2:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER, MALDA MECHANICAL DIVISION,PHED
Office of the Executive Engineer, Malda Mechanical Division, PHE Dte. Doulatpur PHE complex, P.O. Maliha, Dist. Malda, PIN 732102
Laying of rising main by supply delivery and fixing of Rubber Hose Pipe with other allied works on river Fulhar at Intake Station of Balupur water supply scheme in the district of Malda under Malda Mechanical Division, P. H. E. Dte.
2022_PHED_388335_3
WBPHED/EE/MLMD/NIeT_04 of 2022-2023
Open Tender
Electrical Work/ Equipment
Item Rate
45 days
Doulatpur PHE complex, P.O. Maliha, Dist. Malda
Please refer Tender documents.
4 documents required · 4 mandatory
₹56,450
Yes
31 Aug 2022
8 Jul 2022
27 Jul 2022
11 Jul 2022
25 Jul 2022
11 Jul 2022
180 days
Amount
PART - A
Supply delivery & storage at site single stage non-clog Submersible Centrifugal pumping mechinery complete with mono-block 22kw/4 Pole rating motor and requisite accessories of capacity 172M3/hr, Generated Head-20Mtr. H-Q-P Curve of pumps, Datasheet, General Arrangement of drawing and Pump Manufacturing Quality Plan has to be submitted during the delivery.
250 mm size Cast iron double flanged Rising Spindle Sluice Valve generally confirming to IS 14846 having body door /dome/Bonnet and cover of cast Iron Gr FG 260, outside screen rising Spindle of IS 6603 Gr-12 cr-13, spindle nut & seat rings are Gunmetal as per 1S:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximum working pressure of 16 kg/sqcm (seat test) and body tested to 24 kg/sqcm. All the valves should be tested by closed end method only.
Supply, delivery and storage at site of following items, including bends, fittings, flanges, bolts, nuts, gaskets etc. if required to make the installation complete in all respect upto the satisfaction of EIC.
MS pipe T (250 mm X 250 mm X 250 mm) of length 2 mtr, thickness 12 mm with three side flanged.
Coupler (250mm X 250mm) of length 1 mtr, thickness 12 mm with flanged and drilled as per IS and BS at both side.
Double flange (250mm X 250mm) of length 300 mm, thickness 12 mm
Supply delivery at site and storage of DN 250 mm flexible rubber hose having following specification: Heavy duty, burst pressure not less than 8 kg/sqcm, proper reinforcement with GI wire inside with both end flanges drilled as per BS 10 Table- D, flanged ends of thickness 11-12 mm each of length 3 Meters suitable for installing on floating barge at river for raw water pumping main. (Make-Asian Supply Agency/ any approved vendor of PHED)
Anchoring the the Barge / Pontoon and the platform with river bed with the help of Suitable Anchors made out of Wrought Iron (20 Kg each) and Nylon rope. all complete as per direction of E.I.C.
PART - B
Carrying of 250 mm dia rubber hose pipe as in sl no 1.04 from river embankment to Barge position by suitable mode of carraige preferably through head load mode of transfer (1 no. Hose pipe carrying required 4 nos. labour and can carry 5 nos. pipe in 8 hours considering 0.6 KM inside the river bed)
Fitting fixing of 250 mm dia rubber hose pipe as in sl no 1.04 with the existing hose pipe and making new rubber insertion (100 Kg approx) and new MS nut, bolt of TATA/GKW make (300 Kg approx) all complete as per direction of EIC. (1 pipe fittings need two nos flange joint, 36 nos new + 2 nos old)
Fiiting and fixing of all items as mentioned in PART- A (1.01 to 1.013) including supply of all erection materials, rubber insertion, required quantity of nuts and bolts, pipe supports, cable termination of newly supplied pump set, valve supports etc. as required at site by adopting suitable method so as to facilate the maintenance of pipe line locally as per conventional method for installation of pump set, earth work in excavation of foundation trenches or drains for laying of rising main upto river bank ( work shall be completed in all respect and as per direction of EIC)
MAKE AS PER DEPARTMENTAL APPROVED VENDOR LIST CIRCULATED VIDE MEMO NO.PHE/IV/2277/W-181/19 DATED- 25/09/2019
Add GST @12%
Add GST @1%
Premnath Mitra
M/S. SWAPAN BANERJEE
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .