Loading
Loading…
Loading…
Tender Value
₹76,800
EMD Value
₹1,536
Closing Date
3 Sept 2026, 6:55 pm5d left
Executive Engineer REW Pulwama
Executive Engineer REW Pulwama
RDDDC2627107165 -(CONST OF STEPS FROM NEW EID GAHH NEAR HANIFIA HIGH SCHOOL FAZALPORA TUJAN (SHADIM))
2026_RDPR_322416_48
e- NIT No. 104/2026-27 Dated 25-08-2026
Open Tender
Civil Works
Percentage
30 days
Pulwama
Please refer Tender documents.
2 documents required · 2 mandatory
₹200
Executive Engineer REW Pulwama
₹1,536
26 Aug 2026
26 Aug 2026
4 Sept 2026
26 Aug 2026
3 Sept 2026
26 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and
ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directedAll kinds of soil : | 6.11 | cum | - | - |
| 2 | Providing and laying of dry stone soling including carriage from 10 km by MT. (including plum qty) | 2.85 | cum | - | - |
| 3 | Providing and laying in position cement concrete of specified grade including curing but
excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | 7.34 | cum | - | - |
| 4 | 12mm thick cement plaster in 119-07-20234 mix complete. | 45.14 | sqm | - | - |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form work for:
4.6.1 Foundations, footings, bases for columns | 30.09 | sqm | - | - |
| 6 | carriage of sand and bajari from 20 kms lead by MT. | 10.44 | cum | 1 | ₹10.43 |
| 7 | Manufacturing supplying and fixing of sign board of 2mm thick MS sheet support frame of M.S. angle iron of size 40x40x5mm and Photographs (as approved by Engineer in-charge) (To be paid as per actual) | 1 | LS | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.77 MB
BOQ_1080517.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].