Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹41.8 LAccepted-AOC AT POST ARANGAON MEHERABAD TAL DIST AHMEDNAGAR PIN 414006 | AHMEDNAGAR | AHMEDNAGAR | MAHARASHTRA | 414006 | 1 | Accepted-AOC Being L1 | |
| 2 | 2₹58.0 L+₹14.4 L (33.1%)Rejected-Finance 6 SAI KRUPA SONAWANE PARK BEHIND TILAK NAGAR BUS STOP OZAR MIG NASHIK 422206 | NASHIK | NASHIK | MAHARASHTRA | 422206 | 2 | Rejected-Finance Since not L1 | |
| 3 | 3₹59.6 L+₹16.0 L (36.7%)Rejected-Finance | 3 | Rejected-Finance Since not L1 | |
| 4 | 4₹64.3 L+₹20.7 L (47.5%)Rejected-Finance | 4 | Rejected-Finance Since not L1 | |
| 5 | 5₹64.3 L+₹20.7 L (47.5%)Rejected-Finance BUNGLOW NO 9 VAMBORI ROAD NEAR R T O OFFICE AHMEDNAGAR 414 001 | AHMEDNAGAR | AHMEDNAGAR | MAHARASHTRA | 414001 | 5 | Rejected-Finance Since not L1 |
Tender Value
₹80 L
EMD Value
₹95,000
Closing Date
5 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Chief Engineer RnD Secunderabad
Chief Engineer RnD Picket Secunderabad 500003
ADDITION ALTERATION OF NCOs MESS P 87 AND SINGLE ORs LIVING ACCOMMODATION P 203 AT VRDE AHMEDNAGAR
2022_MES_542692_1
85316
Open Tender
Civil Works
Item Rate
180 days
AHMEDNAGAR
Class C
category a i
7 documents required · 7 mandatory
₹1,000
Yes
Garrison Engineer I RND Girinagar
₹95,000
Yes
27 Oct 2022
2 Aug 2022
12 Sept 2022
2 Aug 2022
5 Sept 2022
29 Aug 2022
Amount
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 20 mm thick machine cut kota stone slab flooring over cement screed 20mm thick in CM 1:6 base laid and jointed with grey cemnt slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.18 sqm but n exc 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointeed in white or coloured cement to match as in floors over and including screed bed 15 mm thick in CM 1:6 complete all as specified and directed. NOTE: Tiles shall conform to the standards of IS 15622:2017 and testing norms filfills as per IS:13630(relevent Parts)
M & L Glazed ceramic coloured tiles in vertical surface 450 x 350 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed.
M&L for 20 mm thick granite (of any type) flooring machine cut, bedded, jointed with grey cement slurry and pointed withwhite cement with admixture of pigment to match the shade of granite stone incuding grinding and polishing complete over and including screed bed 20 mm thick in CM 1:6 complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each and removing from site complete all as specified and directed.
M&L for Pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete as specified supplied and fixed.
M&L for Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete as specified supplied and fixed.
M&L for PCC 1:3:6 type C1 (20 mm graded aggregate) in lintels upto 1.5m clear span cills, steps; coping kneelers apex stones bed plates or chamfered angles and throating complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm and removing from site complete all as specified and directed.
Taking down shutters of any description exc. 1.0 sq. m and n exc 2 sq. m each complete all as specified and directed.
S&F, 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed.
S&F, 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and one side with 0.90mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions all with 6 mm thick teak wood edging all round all as directed by Engineer-in-Charge.
S&F, Coloured powder coated [Minimum 50 Micron thick] anodised aluminium frame, shutters for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, comleate all as specified and directed by Engineer-in-Charge.
S&F, Factory made single extruded (WPC Polymer Composite) solid door/windows/Ceosetory windows & other frames/chowkats of size 65x100,, comprising of virgin PVC polymer of K value 58-60 (Suspension Grade) Calcium Carbonate and natural fibers (wood powder/ Rice husk) and non toxic additives (Maximum toxicity Index of 12 or 100Gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed as screws having minimum frame density of 750 kg per CUM, screws withdrawal strength of 2200N (face) and & 1100N (Edge), minimum compressive strength 58 N/MM2, Modulus of elasticity 900 N/MM2 and resistance to spread of flame of Class A category with property of being termite / borer proof water / moisture proof and fire retardant and fixing with MS holdfast/lugs/SS fastners of reuired dia and length all as per direction of Engr-in-Charge.
S&F, Factory made single extruded (WPC Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K Value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/Cum and screw withdrawal stregth of 1800 N (Face) & 900N (Edge), minimum compressive strength 50 N/MM2, Modulus of elasticity 850 N/MM2 and resistance to spread of flame of Class A category with property of being termite / borer proof water / moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engr-in-Charge. Note: Stainless steel butt hinges and necessary SS Screws shall be paid separately.
S&F, 150mm long rim latch with two levers, of mild steel body, stove enamelled finish, with brass knob or lever handle brass body polished bright for WPC door complete all as specified and directed.
S&F 100mm size stainless steel butt hinges for WPC door complete all as specified and directed.
S&F 150mm handles for WPC door complete all as specified and directed.
S&F 200mm long tower bolt for WPC door complete all as specified and directed.
Taking down the cement plaster from brick or concrete wall etc. And raking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed.
M&L for rendering 15mm thick for internal surface of wall in CM 1:6 finished even and smooth finish complete all as specified and directed.
M&L for rendering 15mm thick (in two layers (10+5) for external surface of wall in CM 1:4 finished even and smooth complete all as specified and directed.
M&L for preparation of newly wall surfaces (Internal) and applying two coats of Cement based Wall Care Putty of 2mm on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of Acrylic Distemper Emulsion over a coat of alkali resistant primer andtint shall be as approved by the GE complete all as specified and directed
M & L for preparation of newly plastered Wall surfaces and applying two or more coats of Cement based Wall Care Putty of 2mm on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying Two coats of 100% Acrylic premium Weather Proof Exterior Emulsion Paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance of required shade over and including a Coat of Weather Proof Exterior Primer of same manufacturer as that of paint complete all as specified and as directed.
Taking down / removal of entire existing water proofing treatment in any postion including tarfelt, lean concrete, Gravels etc & removing to a distance exc.500m but n exc 2.00 KM complete all as specified and directed.
M&L for padding concrete type B0 1:2:4 (12.5 mm graded aggregate) on slabs supported for roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for 15mm thick cement plaster in CM (1:3) with a mixture of water proofing compound by weight of cement on dried concrete surface finished fair and even without using extra cement complete all as specified and directed. Note: Water Proofing compound shall be measured seperately.
Supply only integral water proofing compound complete all as specified and directed.
M&L for APP modified membrane pre fabricated five layer 3mm thick with non-woven polyester matt central core of 160 gsm (minimum) impregnated and coated on both sides with layers of APP modified bitumen and finished with micro-perforated heat fusible polythene film on both surfaces. The weight of membarane shall not be less than 3.5 kg per Sqm and laid over primed surface by using LPG / Butane torch and applying uniform pressure with a roller / wet cloth to ensure to remove entrapped air if any. Four course roof treatment consist of as under:- (i) Applying one coat of bituminous primer conforming to IS-3384 @ 0.2Ltr per Sqm. (ii) Laying of APP based membrane of specified thickness and weight. (iii) Applying one coat bitumen grade 85/25@ 1.2Kg/Sqm. (iv) Applying two coat of aluminium paint @ 100ml/sqm. Note: WPT to be taken right through parapet wall & top and tucked in groove.
S&F in repair for vitreous china squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 including making connection to flush pipe outlet and inti symphonic pipe etc. (excluding flushing cisten) and making good to floor including removing rubbish complete all as specified and directed.
S&F box type PVC cabinet mirror of size 600mm x 400mm x 160mm complete all as specified and directed.
S&F in repairs vitreous china wash basin, angle back size 600 x 480mm white, excluding taps, waste, chain and plug and porceilin stopper but including brackets and 32 mm PTMT waste coupling etc. complete all as specified and directed.
S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed but fancy type complete all as specified and directed.
S&F in repair for sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F repairs 10 liters capacity PVC low level flushing cistern with ISI marked body, fixed in repairs complete all as specified and directed.
S&F repair PVC connection with brass socket on both side 45cm to 60cm for 15mm dia size complete all as specified and directed.
S&F in repair for 40mm dia waste coupling of PTMT (half or full threaded) (Minimum weight 60 gms) complete all as specified and directed.
S&F PVC (SWR) floor trap 75mm dia out let with grating including jointing with solvant cement complete all as directed.
S&F in repair for 32mm dia waste coupling of PTMT (half or full threaded) (Minimum weight 45gms) complete all as specified and directed.
S&F in repair 15mm cast copper alloy fancy type chromium plated bib taps with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F, Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. Make: Jaguar or equivalent of Marc series.
M & L for two coats of synthetic enamel paint over one coat of pink primer to newly untreated wooden surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.
S&F, PVC (SWR) 110 mm pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. Note: The rate quoted by the contractor is including necessary scaffolding etc.
Dismantling cast iron work of any description and removing from site at any hight & any position complete all as specified and directed.
S&F, PVC (SWR) 75 mm pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. Note: The rate quated by the contractor is including necessary scaffolding etc.
S&F, PVC (SWR) Single 'T' 110mm bore branch piece with access door single equal or unqual complete all as specified and directed.
S&F, PVC (SWR) Single 'T' 75mm bore branch piece with access door single equal or unqual complete all as specified and directed.
S&F, PVC (SWR) bends 110mm any radius with access door complete all as specified and directed.
S&F, PVC (SWR) bends 75mm any radius with access door complete all as specified and directed.
Taking up or down steel tubing 15mm bore and connections including cleaning for refixing or removing from site complete all as specified and directed.
Taking up or down steel tubing 20mm bore and connections including cleaning for refixing or removing from site complete all as specified and directed.
Refixing old 15 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed to walls / ceiling or laid in floors making concealed all as specified and directed.
Refixing old 20 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed to walls / ceiling or laid in floors making concealed all as specified and directed.
Supply & laying 15 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed to walls / ceiling or laid in floors making concealed complete all as specified and directed.
Supply & laying 20 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed to walls / ceiling or laid in floors making concealed complete all as specified and directed.
S&F, PVC (SWR) single 'Y' 110mm bore branch piece single equal or unqual complete all as specified and directed.
S&F, PVC (SWR) single 'Y' 75mm bore branch piece single equal or unqual complete all as specified and directed.
M&L for salt glazed stone ware gully trap squre or round mounthed type 'P' size 100mm x 100mm complete all as specified and directed.
M&L for PVC (SWR) multi floor trap, plain with grating including jointing with solvent cement 75 mm dia complete all as specified and directed.
Dismantling of water tank exc 250 but not exc 500 and removing to store complete all as specified and directed.
S&F for Rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I complete all as specified and directed.
Dismantling of water tank exc 500 but not exc 1000 and removing to store complete all as specified and directed.
S&F, rotational moulded polyethylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I complete all as specified and directed.
S&F, Ball valves 15mm high pressure, PTMT with epoxy coating aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 15mm-142gms) complete all as specified and directed.
S&F, Ball valves 20mm high pressure, PTMT with epoxy coating aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm-210gms) complete all as specified and directed.
S&F in repair stainless steel brass chromium plated towel rail, 20 mm dia, 'D' type, 60 cm long between flanges complete all as specified and directed.
S&F, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L for preparing old steel surfaces of any description exc 10cm width or girth when unconnected with other painting preparing old surfaces applying two coat of synthetic enamel ordinary tint complete all as specified and directed.
M&L for preparing old wooden surfaces of any description not otherwise described over exc 10cm width or girth when connected with painting preparing old surfaces applying two coat of synthetic enamel ordinary tint complete all as specified and directed.
M&L for complete removal of existing treatment on wall/ceiling surface including preparation by scrapping down with wire brushes and washing down and removing existing loose particles, scrapping down smoke soots, moulds, moss, efflorescent salts, treading oil and greasy spots including and applying Two coats of 100% Acrylic premium Weather Proof Exterior Emulsion Paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance of required shade over and including a Coat of Weather Proof Exterior Primer of same manufacturer as that of paint complete all as specified and as directed.
M&L for preparing old surfaces and applying two coat of white wash all as specified and directed by Engineer-in-Charge.
M&L for preparing old surfaces of ceiling and applying two coat of white wash all as specified and directed by Engineer-in-Charge.
M&L for preparation of old surface of wall and applying two coat of distemper oil emulsion etc. complete all as specified and directed.
S&F butt hinges, medium weight, cold rolled, mild steel of size 100mm complete all as specified and directed.
S&F 150 mm long aluminium, anodized, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F extruded aluminium alloy handles, fabricated type, anodized of size 150 mm complete all as specified and directed.
S&F Floor 140mm door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.
S&F 25mm bore Stainless steel curtain rods 1.2mm to 1.5mm of grade SS202 chrome finish including pair of fancy type brackets, intermediate suppots in case of length of rod more than 1.5m with necessary screws and plugs complete all as specified and directed.
S&F, sheet glass 5.50 mm thick sheet glass ordinary quality and glazing with aluminium beading and n.exc 0.5Sqm in each panes complete all as specified and directed.
S&F sheet glass 5.50 mm thick sheet glass ordinary quality and glazing with aluminium beading and exc 0.5Sqm in each panes complete all as specified and directed.
M& L for 75 mm thick PCC 1:3:6 type C-1 as in plinth protection finished fair and even without using extra cement n exc 2m in length including and joints filled with bitumen mastic (1:1) complete all as specified and directed.
S&F, Angle cock / stop valves, cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair vitrous china urinal, full stall type, white excluding flushing cistern, flush pipe and waste pipe complete all as specified and directed.
S&F in repairs vitreous china semi pedestal pattern (Anglo Indian type white excluding fixing bolts flushing cistern and flush pipe complete all as specified and directed.
S&F in repair health faucet with 8mm dia and 1.20m long flexible chrome finish tube & wall hook complete all as specified and directed. Make: Jaquar Cat Part No ALD-573 OR equivalent in make
AREA DRAINAGE Excavating in trenches not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft / loose soil, complete all as specified and directed.
M&L for Plain Cement Concrete Type D-2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.
M&L for precast cement concrete block masonry type C1(1:3:6) (Using 20 mm graded granite stone aggregate) with solid blocks, exc 10cm in width and in cement mortar 1:4 complete all as specified and directed.
Demolition of brickwork built in cement mortar including all pillars, etc and removing of the debris as directed by Engineer-in-Charge.
M&L for extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.
M&L for PCC type B-1 (1:2:4) (Using 20 mm graded granite stone aggregate) as in benching and coping complete all as specified and directed.
M&L for rendering 10mm thick in CM (1:4) on wallsurfaces of brick/concrete finished even and fair complete all as specified and directed by Engineer-in-Charge.
M&L for concrete bed to drain pipes 450mm dia including packing under and haunching against the sides of pipes after they are laid and tested; in cement concrete type C2 1:3:6 (Using 40 mm graded granite stone aggregate)complete all as specified and directed.
M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
M&L for reinforced concrete pipes, class NP-2 laid jointed complete with collers 450 mm dia complete all as specified and directed.
Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
Demolition and breaking up drain pipes (salt glazed ware AC or Reinforced concrete) set in CM complete all as specified and directed.
ROAD / PATH / BOUNDARY WALL Excavation over area in soft / loose soil not exc. 1.50 M deep and getting out complete all as specified and directed.
Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface 100 mm thick complete all as specified and directed.
M&L for cement concrete type D-2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base as 75 mm thick, complete all as specified and directed.
M&L for sand filling under floors or in foundation including watering and 50 mm consolidation sand cushioned complete all as specified and directed.
M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete coloured, glossy finish rubber moulded paver block of M-35 grade with approved colour, design & pattern confirming to IS: 15658-2006 as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
M&L for repair to pot holes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scooring sunken surfaces of roads, paths, etc. cutting around edges to at least 25mm in depth, making good by applying tack coat at 5 kg per 10 sq m. putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cum of stone chippings, 6.3 mm size and again will rammed (including supply or premixed macadam, binder and chippings), depth of potholes exc 30mm complete all as specified and directed.
Preparing black top surfaces by brushing with wire brushes for removing caked mud of surface etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc, complete all as specified and directed.
M&L for applying evenly a priming / tack coat with paving bituminous primer @ 5 kg per 10 sqm on black top surface complete all as specified and directed.
M&L for bituminous premix semi dence aphaltic concrete 40 mm consolidated thickness with 5.5% binder VG-30 content by weight of total mix rolled and compacted to required camber and gradient complete all as specified and directed by Engineer-in-Charge.
Providing and applying 3.0 mm thick road marking strips of specified shade / colour using hot thermo plastic material by full automatic thermo plastic paint appllicator machine complete all as specified and directed.
Dismantling of MS work as grill of boundry wall complete all as specified and directed.
Demolition of cement concrete as in coping floor etc, complete all as specified and directed.
M&L for precast cement concrete type 1:3:6 using (16mm graded aggregate as per IS 383) block masonry with solid block exceeding 10 cm in width and setting in mortar complete in CM 1:6 as in wall complete all as specified and directed.
S & F Rolled Mild Steel work confirming to Fe 410-W, Grade-E- 250, Quality-A as in Framed work as in doors or gates of angle or other sections with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete all as specified and as directed.
M&L for rendering 15mm thick in CM (1:4) on wallsurfaces of brick/concrete finished even and fair complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of surface and applying two coats cement base paint over a coat of primer over newly prepared plaster surface complete all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of red oxide primer over newly prepared steel surface complete all as specified and directed.
INTERNAL ELECTRIFICATION Taking down carefully aluminium point wiring (light, fan, socket or power) complete including fixture & fitting such as switches, sockets or power socket, pendents, regulators, light fittings etc complete and making good disturbed surfaces of walls, ceilings and floors etc, complete all as specified and directed.
Taking down unserviceable DBs / switch fuse units any type including MCB's / isolators complete all as specified and directed.
Taking down unserviceable security light fitting complete all as specified and directed.
Taking down old aluminium unserviceable sub main wiring any type complete all as specified and directed.
M&L for point wiring with single core PVC insulated and unsheathed 1100 volts garade FRLS electric cable with multistranded copper conductor of size 1.5 sqmm (nominal area) drawn through in and including concealed PVC conduit of 25mm dia including cutting chases on wall with all necessary accessories including wall clamp, tees, junction boxes & provision of pressed steel terminal box powder coated of suitable size with 3mm thick plastic laminated sheet cover for mounting switches, sockets & regulators & drawing continuous earth wire of PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 1.5sqmm (nominal area) complete all as specified and directed by Engineer-in-Charge for one light / bell point controlled by one single pole switch. Note: (i) Rate include cost of making MS box in concealed for cutting and sinking and making good to wall. (ii) On soffit of ceiling, no chases will be cut. The wiring will be done in casing caping.
All as per Sl item No. 122 here-in-before, but for one ceiling fan / exhaust fan / wall and wall mounted fan point controlled by one single pole switch.
All as per Sl item No. 122 here-in-before, but for one 3 pin, 5 Amps socket oultet on independent board.
All as per Sl item No. 122 here-in-before, but for one 3 pin, 5 Amps socket oultet on same board with other switches.
All as per Sl item No. 122 here-in-before, but for one light point controlled by two 2 way switch.
All as per Sl item No. 122 here-in-before, but for 3 pin socket outlet 15 Amps on independent board with other circuit with the cable of 2.5 sqmm size and earth continuity conductior of 2.5 sqmm size PVC insulated copper stranded conductor cable.
S&F, socket outlet 3 pin, 5/15 Amps, flush type multipurpose complete all as specified and directed by Engineer-in-Charge.
S&F, socket outlet 5 pin, 5 Amps, flush type complete all as specified and directed by Engineer-in-Charge.
S&F, switch piano, flush button 15 Amps, single pole, one way complete all as specified and directed by Engineer-in-Charge.
S&F, switch piano, flush button 5 Amps single pole, one way complete all as specified and directed by Engineer-in-Charge.
S&F, ceiling rose, surface, backlite 3 terminals, 65mm x 50mm complete all as specified and directed by Engineer-in-Charge.
S&F, stepped type electronic fan regulator complete all as specified and directed by Engineer-in-Charge.
S&F, switch piano, flush button 5 Amps, single pole, two way complete all as specified and directed by Engineer-in-Charge.
M&L for sub main wiring with two single core PVC insulated unsheathed FRLSH stranded copper conductor cable 2.5 sqmm size drawn through in and including concealed PVC conduit 25mm dia medium grade with all accessories including continuous earth wire PVC insualted unsheathed FRLSH cable 2.5 sqmm copper stranded conductor and connection to common earth and earth dolly including conneciting to main board complete and cutting chases of suitable girth on brick / concrete surface & making good disturbed surface as per existing surface complete all as specified and directed by Engineer-in-Charge.
M&L for sub main wiring with two single core PVC insulated unsheathed FRLSH stranded copper conductor cable 4 sqmm size drawn through in and including concealed PVC conduit 25mm dia medium grade with all accessories including continuous earth wire PVC insualted unsheathed FRLSH cable 4 sqmm copper stranded conductor and connection to common earth and earth dolly including conneciting to main board complete and cutting chases of suitable girth on brick / concrete surface & making good disturbed surface as per existing surface complete all as specified and directed by Engineer-in-Charge.
Supply and fixing LED lights fitting 1x 20W, 220VAC decorative box type with driver, LED tube light connecting up with three core flexible copper conductor cable of suitable size ceiling rose to tube light fitting complete. Make : Model No. BLRB20NWLED of Bajaj or technocommercially equavalent in Philips/Jaquar/LG/Havells
S&F, LED 10 watt mirror light fitting wall mounted with high out put diffuser 2 feet, 10 watt, 220 V, AC decorative type with driver holder and LED lamp including connecting up with three core copper conductor cable of suitable size complete all as specified and directed. Make : Model No. BCLSB10NW of Bajaj or technocommercially equavalent in Phillips/Wipro/CG/Havells
S&F, LED security light 1 x 25 W IP 66 pressure die cast aluminium housing for building complete including suitable GI bracket, MS clamps, nuts & botls with necessary electrical connection complete all as specified and directed. Make: Havells Cat No. ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent of Bajaj/phillips/Wipro/CG.
S&F, sheet steel enclosure MCB DBs factory fabricated phosphatised powder painted, triple pole & neutral, with 200 Amps rated bus bar, 415 volt, AC, 4 ways, double door type complete all as specified and directed by Engineer-in-Charge.
All as per Sl item No. 140 here in above, but SPN 12 way double door.
S&F, MCB triple pole neutral (TPN), 63 Amps, 415 volts, B curve, 10KA complete all as specified and directed by Engineer-in-Charge.
S&F, MCB single pole and neutral, 40 Amps, 240 volts B curve, 10KA complete all as specified and directed by Engineer-in-Charge.
S&F, MCB single pole and neutral, 32 Amps, 240 volts B curve, 10KA complete all as specified and directed by Engineer-in-Charge.
S&F, MCB single pole 6 Amps to 32Amps, 240 volts complete all as specified and directed by Engineer-in-Charge.
M&L for Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground vertically to a depth not less than 2.25 metre deep below ground level with top edge of the plate not less than 1.5 metre below normal ground level and connected to earth plate surrounded by 15cm thick packed layers of charcoal dust and common salt and conected to GI wire 4mm dia by means of bolts, nuts check nuts and wahsers of galvaised iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvanised iron or steel pipe light grade 15mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C2 and RCC cover all as shown in electrical Plate No. 3 complete all as specified and directed.
S&F, time switches electronic type 230 Volt, single phase of 20 Amps rating with contactor fitted inside steel enclosure complete all as specified and directed.
EXTERNAL ELECTRIC SUPPLY S&F, LED post top lantern 30 watt, IP 65 protection, resistant to impact and corrosion. Glare-free including eclectrical connection complete all as specified and directed. Make : Model No. RUBYPT35WLBD75TPSY MTOPC of Havells or technocommercially equavalent in Phillips/Wipror/CG/Bajaj
Supply, installation, testing & commissioning of solar light system LED 24 watt complete with all fixtures ie pole, SPV panel, battery etc., complete all as specified and directed by Engineer-in-Charge. Model No. 24WSOLARSLS of Havells or technocommercially equavalent in Phillips/Wipror/CG/Bajaj
HOT WATER APPLIANCES S&F, water heater storage type, electric, capacity 25 litres, 240 volts, 5 Star Rated, verticle type complete including all fixture complete all as specified and directed.
REFRIGERATOR & AIR CONDITIONING S&F, desert cooler, electric driven, 240V single phase, having nominal air flow capacity of 5000 CuM per hour (or nearest size) plastic / PVC body complete all as specified and directed.
S&F, water cooler, electric driven, 240V, single phase, fully Stainless Steel body with two water outlets having storage capacity of 120 ltr and nominal cooling capacity of 60 ltr per hour complete all as specified and directed.
M/s M R MAHANA
M/s Meher Construction
M/s. N D Karande
G.M. Construction
N. H. Saluji & Associates
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .