REPAIR/REPLACEMENT OF INTERNAL WIRING, DISTRIBUTION BOXES, SUBMAIN WIRING, DEFECTIVE LIGHTS AND FITTINGS AND OTHER RELATED ITEMS IN MD ACCN IN NAVAL AREA UNDER GE HADDO, PORT BLAIR

Amount

Taking down carefully old unserviceable aluminum/ copper point wiring (light, fan, socket or power) complete, including fittings & fixtures such as switches, ceiling roses, lamp holders, pendants, regulators sockets, light fittings, junction/terminal boxes etc; removing from site and making good disturbed surfaces of walls, floors etc., to match with existing surrounding surfaces complete all as specified and as directed.

Taking down existing unserviceable sub main wiring of any description and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed.

Taking down existing unserviceable main switches/ distribution boards of any description alongwith MCBs/MCCBs and making good disturbed surfaces to match with existing surrounding finishes complete all as specified and as directed.

Taking down carefully old unserviceable light fittings only and removing from site complete all as specified and as directed.

M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in CI boxes/pressed steel terminal boxes 60mm deep made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint outside and with two coats of aluminium paint inside and laminated sheet cover of 3mm thick on top for housing the switches, socket outlet etc, all as specified and as directed for ONE LIGHT/FAN point controlled by one, one way 6 Amps switch.

M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in CI boxes/pressed steel terminal boxes 60mm deep made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint outside and with two coats of aluminium paint inside and laminated sheet cover of 3mm thick on top for housing the switches, socket outlet etc, all as specified and as directed for ONE BELL point controlled by one, one way 6 Amps switch.

M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in CI boxes/pressed steel terminal boxes 60mm deep made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint outside and with two coats of aluminium paint inside and laminated sheet cover of 3mm thick on top for housing the switches, socket outlet etc, all as specified and as directed for ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps switch on independent board.

M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in CI boxes/pressed steel terminal boxes 60mm deep made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint outside and with two coats of aluminium paint inside and laminated sheet cover of 3mm thick on top for housing the switches, socket outlet etc, all as specified and as directed for ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps switch on same board.

M&L for Point wiring complete with 2.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 2.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in CI boxes/pressed steel terminal boxes 60mm deep made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint outside and with two coats of aluminium paint inside and laminated sheet cover of 3mm thick on top for housing the switches, socket outlet etc, all as specified and as directed for ONE 16A SOCKET OUTLET point controlled by one, one way 16 Amps switch on independent board.

S&F switch piano, flush type, single pole, one way, 6 Amps, 240 volts complete all as specified and as directed.

S&F bell push, flush type, single pole, one way, 6 Amps, 240 volts complete all as specified and as directed.

S&F switch socket outlet, 5 pin, 6A, flush type, multipurpose, 240 volts complete all as specified and as directed.

S&F switch socket outlet, 2-in-1, 6 pin, 6A/16A, flush type, multipurpose, 240 volts complete all as specified and as directed.

S&F electronic fan regulator for ceiling fan, step type, 5 speed, AC, 120 watts, 230 volts complete all as specified and as directed.

S&F electric bell, ding dong type, AC, 230 volts complete all as specified and as directed.

M&L for ceiling rose, three terminal, 65x20mm size, PVC/Polycarbonate, insulated body, 6A, 240 volts complete all as specified and as directed.

M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for ONE LIGHT/FAN point controlled by one, one way 6 Amps modular switch.

M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for TWO LIGHT points controlled by one, one way 6 Amps modular switch.

M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for ONE BELL point controlled by one, one way 6 Amps modular switch.

M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps modular switch on independent board.

M&L for Point wiring complete with 1.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 1.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for ONE 6A SOCKET OUTLET point controlled by one, one way 6 Amps modular switch on same board with other switches.

M&L for Point wiring complete with 2.5 Sqmm (nominal area) single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral), drawn through and including rigid non metallic PVC casing and capping of suitable size (not less than 25mm) and accessories fixed on walls/ceilings etc., including provision of PVC insulated 2.5 Sqmm FRLS cable with copper conductor green in colour for earth continuity and connected to common earth dolly and sunk in modular type pressed steel terminal boxes of suitable modules made out of 1.6mm thick MS sheet duly painted with two coats of anti-corrosive paint all over and modular cover plates with frames on top for suitable modules on top for housing switches, sockets etc., all as specified and as directed for ONE 16A SOCKET OUTLET point controlled by one, one way 16 Amps modular switch on independent board.

S&F modular switch, one way, one module, single pole, 6 Amps, 240 Volts AC complete all as specified and as directed.

S&F modular socket, multipurpose, 2/3 pin combined, 2 module, single pole, 6 Amps, 240 Volts AC complete all as specified and as directed.

S&F modular socket, multipurpose, 2/3 pin, 6/16 Amps combined, 2 module, single pole, 240 Volts ACcomplete all as specified and as directed.

S&F modular switch, one way, one module, single pole, 16 Amps, 240 Volts AC complete all as specified and as directed.

S&F modular bell push, one way, one module, single pole, 6 Amps, 240 Volts AC complete all as specified and as directed.

S&F modular electronic fan regulator for ceiling fan, step type, 5 speed, AC, 2 module, 120 watts, 240 volts complete all as specified and as directed.

M&L for Sub main wiring complete with four runs (3P+1N) of 10.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and two runs of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Four runs of 10.0 Sqm copper conductor, Two runs of 6.0 Sqmm copper conductor as earth wire and and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.

M&L for Sub main wiring complete with two runs (1P+1N) of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 6.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Two runs of 4.0 Sqm copper conductor, One run of 4.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.

M&L for Sub main wiring complete with two runs (1P+1N) of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor (with colour coding of Red/Blue/Yellow for phase and Black for neutral) and one run of 4.0 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, multistranded copper conductor as earth wire green in colour including lugs, drawn through and including 32mm wide rigid non-metallic PVC casing and capping and its accessories (OR) 25mm dia PVC conduit and conduit accessories fixed on surface of wall/ceiling/roof/ floor complete all as specified and as directed. NOTE: Two runs of 4.0 Sqm copper conductor, One run of 4.0 Sqmm copper conductor as earth wire and one run of PVC casing and capping / PVC conduit shall be measured as one unit length.

Taking down carefully ceiling fan of any sweep from ceiling hook at any height after disconnecting from electricity, dismantling blades, opening up for carrying out servicing/over hauling, examining for damaged worn out parts like shaft, ball bearings etc., and applying grease to bearings, assembling back, preparing painted surfaces by cleaning dust, grease etc., and by filling cavities with filler to receive spray paint using synthetic enamel paint of existing shade and writing MES No. in synthetic enamel paint, fixing up blades and hanging back in position and providing and connecting up with 1.0 sqmm twin core twisted flexible copper conductor of suitable length from connector of fan to ceiling rose and testing complete all as specified and as directed. NOTE: Spare parts like ball bearings, shafts, fan blades, copper winding shall be replaced only if found damaged and certified by Engineer-in-charge. If spares are replaced, they shall be measured and paid separately as SUPPLY ONLY. A book shall be maintained for record of servicing and replacement of spares with MES Nos. of fans.

Taking down carefully exhaust fan/ wall mounting fans of any sweep from its position at any height after disconnecting from electricity, dismantling blades, opening up for carrying out servicing/over hauling, examining for damaged worn out parts like shaft, ball bearings etc., and applying grease to bearings, assembling back, preparing painted surfaces by cleaning dust, grease etc., and by filling cavities with filler to receive spray paint using synthetic enamel paint of existing shade and writing MES No. in synthetic enamel paint, fixing up blades and fixing back in position and providing and connecting up with 1.0 sqmm twin core twisted flexible copper conductor of suitable length from connector of fan to ceiling rose and testing complete all as specified and as directed. NOTE: Spare parts like ball bearings, shafts, fan blades, copper winding shall be replaced only if found damaged and certified by Engineer-in-charge. If spares are replaced, they shall be measured and paid separately as SUPPLY ONLY. A book shall be maintained for record of servicing and replacement of spares with MES Nos. of fans.

Rewinding of ceiling fan (any sweep) stator by super enamelled copper winding wire of suitable gauge and size with Garware insulating paper, insulating varnish and oven drying for requisite insulation values including necessary PVC sleeves. lead wires and testing after assembling in position in ceiling fan complete all as specified and as directed.

Rewinding of exhaust fan by super enamelled copper winding wire of suitable gauge and size with Garware insulating paper, insulating varnish and oven drying for requisite insulation values including necessary PVC sleeves. lead wires and testing after assembling in position in exhaust fan complete all as specified and as directed.

Rewinding of wall mounted fan by super enamelled copper winding wire of suitable gauge and size with Garware insulating paper, insulating varnish and oven drying for requisite insulation values including necessary PVC sleeves. lead wires and testing after assembling in position in exhaust fan complete all as specified and as directed.

SUPPLY ONLY sealed ball bearing suitable for ceiling fan with bearing No. 6201/6202 complete all as specified and as directed.

SUPPLY ONLY shaft suitable for ceiling fan 1200mm/1400mm sweep complete all as specified and as directed.

S&F capacitor 2.5mfd, 230 Volts for ceiling fans including taking out old unserviceable one complete all as specified and as directed. MAKE: CAPCO/UNIVERSAL/TIBCON/EPCOS

S&F exhaust fan blade set of 250/300/380mm sweep complete all as specified and as directed.

S&F wall mounted fan blade set of 250/300/380mm sweep complete all as specified and as directed.

Taking down carefully electric geysers of any make, type and capacity after disconnecting of electrical and water connections, opening of bottom cover, checking of all parts and taking out copper tank, checking of its leakage and removing the dust, brazing the leakage and painting of geysers with two coats of synthetic enamel paint, replacement of burnt out spares and assembling the geyser and re-fixing back in its original position complete all as specified and as directed. NOTE: Spares shall be measured and paid separately under relevant items as SUPPLY ONLY.

SUPPLY ONLY heating element 1500 watts.

SUPPLY ONLY thermostat switch.

SUPPLY ONLY pressure release valve.

SUPPLY ONLY thermal cut out.

SUPPLY ONLY indicator lamp RED/GREEN colour.

SUPPLY ONLY PVC connection 15mm size with PTMT nuts of length 600mm. MAKE: PRAYAG/ POLYTUFF

S&F Single pole and neutral enclosure with two pin and earth plug and socket with one single pole MCB 20 Amps, 240 Volts complete all as specified and as directed. MAKE: HAVELLS/INDO ASIAN/LEGRAND

S&F Starter switch of capacity 25 Amps, working on 240 volts, AC supply, suitable for air conditioner complete all as specified and as directed. MAKE: Crabtree Cat part No. ACVSMXW251 or equivalent in ANCHOR/ L&T/ HAVELLS

S&F 20mm dia rigid non metallic stove enamelled steel conduit (ISI marked) heavy grade as in downrod for ceiling fan/ tube light fittings etc., cut to required size (as per site requirement) including drilling holes, suitable size of bolts, nuts and washers complete all as specified and as directed.

S&F MCB DB, TPN, 8-way, vertical type, double door, 415 Volts with 200 Amps rated bus bar, IP-43 protection, shrouded neutral bus bar, cement spill protector, concealed in wall and making good disturbed surfaces to match with surrounding surface complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811872 or equivalent in L&T/ LEGRAND/ HAVELLS

S&F MCB DB, TPN, 4-way, vertical type, double door, 415 Volts with 200 Amps rated bus bar, IP-43 protection, shrouded neutral bus bar, cement spill protector, concealed in wall and making good disturbed surfaces to match with surrounding surface complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811870 or equivalent in L&T/ LEGRAND/ HAVELLS

S&F MCB DB, SPN, 12-way, vertical type, double door, 240 Volts with 200 Amps rated bus bar, IP-54 protection, shrouded neutral bus bar, cement spill protector, concealed in wall and making good disturbed surfaces to match with surrounding surface complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811828 or equivalent in L&T/ LEGRAND/ HAVELLS

S&F MCB DB, SPN, 8-way, vertical type, double door, 240 Volts with 200 Amps rated bus bar, IP-54 protection, shrouded neutral bus bar, cement spill protector, concealed in wall and making good disturbed surfaces to match with surrounding surface complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811826 or equivalent in L&T/ LEGRAND/ HAVELLS

S&F MCB DB, SPN, 6-way, vertical type, double door, 240 Volts, 50 Hz with 200 Amps rated bus bar, IP-54 protection, shrouded neutral bus bar, cement spill protector, concealed in wall and making good disturbed surfaces to match with surrounding surface complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811825 or equivalent in L&T/ LEGRAND/ HAVELLS

S&F MCB DB, SPN, 4-way, vertical type, double door, 240 Volts, 50 Hz with 200 Amps rated bus bar, IP-54 protection, shrouded neutral bus bar, cement spill protector, concealed in wall and making good disturbed surfaces to match with surrounding surface complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811824 or equivalent in L&T/ LEGRAND/ HAVELLS

S&F MCCB, 3 pole, 125 Amps, 50Hz, 25KA rupturing capacity, 415 Volts adjustable type with thermal and magnetic release complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 830259 or equivalent in L&T/ LEGRAND/ HAVELLS

S&F MCCB, 3 pole, 100 Amps, 50Hz, 25KA rupturing capacity, 415 Volts adjustable type with thermal and magnetic release complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 830258 or equivalent in L&T/ LEGRAND/ HAVELLS

S&F Isolator, FP/ TPN, "C" series, 230 volts, 100 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811244 or equivalent in L&T/ LEGRAND/ ABB/ HAVELLS

S&F MCB, TPN, "C" series, 230 volts, 63 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811220 or equivalent in L&T/ LEGRAND/ ABB/ HAVELLS

S&F MCB, DP, "C" series, 230 volts, 63 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811176 or equivalent in L&T/ LEGRAND/ ABB/ HAVELLS

S&F MCB, DP, "C" series, 230 volts, 40 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811174 or equivalent in L&T/ LEGRAND/ ABB/ HAVELLS

S&F MCB, SP, "C" series, 240 volts, 6 to 32 Amps, 10 KA rupturing capacity complete all as specified and as directed. MAKE: INDO ASIAN Cat part No. 811122 to 811129 or equivalent in L&T/ LEGRAND/ ABB/ HAVELLS

M&L for earthing complete with GI earth plate electrode of size 600mmx600mmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5m below normal ground level connected to 4mm dia GI earth wire as earth lead connected by means of bolts, nuts, washers and check nuts made out of galvanised iron or steel all as shown on electrical plate No. 3 of SSR Part-I connected to common earth dolly including testing on completion complete all as specified and directed. NOTES: 1) The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, pre-cast RCC (1:2:4) type B-1 using 20mm graded stone aggregate cover 50mm thick reinforced with TMT bars 8mm dia @ 100mm c/c both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe light grade 40mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (notes) under sub-heading earthing, specified on Sl. Page Nos. 422 & 423 of SSR Part-II. 2) Earthing lead and GI protection pipe beyond 7.5m will be measured and paid separately.

M&L for security/street light mounting bracket made up of 25mm dia galvanised steel tubing, medium grade, 1.20 metres long, bent to shape with inner angle not less than 120°, with and including necessary fixing clamps fabricated out of angle iron/flat iron of suitable size, bolts, nuts and washers as required and applying two coats of aluminium paint over a coat of red oxide primer complete all as specified and as directed.

S&F 18 Watts, 220 Volts surface mounted LED ceiling light fitting of size 234mm x 234mm x 25mm with high performance LED, slim round panel, made from die-cast aluminium and CRCA covering, powder coated in white colour. high efficiency PMMA diffuser complete all as specified and directed. MAKE: PHILIPS, Model: Star Surface or equivalent in HAVELLS/ CROMPTON GREAVES NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting

S&F 18 Watts, 220 Volts recess mounting LED ceiling light fitting, 178mm dia size round/square shaped, made from die-cast aluminium and CRCA covering, powder coated in white colour suitable for armstrong/grid ceiling complete with separate electronic driver complete all as specified and directed.. MAKE: PHILIPS, Model: Astra Max Metal Panel or equivalent in HAVELLS/ CROMPTON GREAVES NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting

S&F 15 Watts, 220 Volts recess mounting LED ceiling light fitting, 159mm size round/square shaped, made from die-cast aluminium and CRCA covering, powder coated in white colour suitable for armstrong/grid ceiling complete with separate electronic driver complete all as specified and directed.. MAKE: PHILIPS, Model: Astra Max Metal Panel or equivalent in HAVELLS/ CROMPTON GREAVES NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting

S&F 10 Watts, 220 Volts recess mounting LED ceiling light fitting, 136mm size round/square shaped, made from die-cast aluminium and CRCA covering, powder coated in white colour suitable for armstrong/grid ceiling complete with separate electronic driver complete all as specified and directed.. MAKE: PHILIPS, Model: Astra Max Metal Panel or equivalent in HAVELLS/ CROMPTON GREAVES NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting

S&F LED lighting fixture, 20 Watts, 220 Volts , 50Hz with extruded aluminium heat sink, environmental friendly energy efficient fitting surface mounted including taking down old defective/rusted/burntout 28 Watts T-5 FTL fittings complete all as specified and as directed. MAKE: PHILIPS, Model: Astra Line or equivalent in HAVELLS/ CROMPTON GREAVES

S&F LED lighting fixture, 9 Watts, 220 Volts , 50Hz with extruded aluminium heat sink, environmental friendly energy efficient fitting surface mounted complete all as specified and as directed. MAKE: PHILIPS, Model: Astra Line or equivalent in HAVELLS/ CROMPTON GREAVES

S&F Wall mounting decorative fixtures made up of metal & glass suitable for 2.7 Watts LED bulb with and including bulb complete all as specified and as directed. MAKE: PHILIPS, Model: 32035 or equivalent in HAVELLS/ CROMPTON GREAVES

S&F indoor recess mounting LED spot light of capacity 7 Watts, compact vertical, round shaped downlighter with removable driver suitable for low ceiling heights working on 230 Volts, 50Hz, AC supply, colour as ordered complete all as specified and as directed. MAKE: HAVELLS Model: Nova Star-NEO, Cat part No. LHEEAYPBMH1W007or equivalent in CROMPTON GREAVES /PHILIPS

S&F LED flood light fitting, 50 Watts, IP-65 luminarie comprising of elegantly designed highly efficient pressure die cast aluminium housing with fins for better heat discipation including necessary fixing arrangement as per site requirement complete all as specified and as directed. MAKE: PHILIPS Cat part No. BVP161LED43NW/CW/WW NOTE: The cradle is provided for mounting purpose

S&F LED flood light fitting, 70 Watts, IP-65 luminarie comprising of elegantly designed highly efficient pressure die cast aluminium housing with fins for better heat discipation including necessary fixing arrangement as per site requirement complete all as specified and as directed. MAKE: PHILIPS Cat part No. BVP182LED70NW/CW/WW or equivalent in HAVELLS/CROMPTON GREAVES NOTE: The cradle is provided for mounting purpose

S&F 25 Watts LED security light fitting with aesthetically designed COB LED ensure efficient optics and uniform distribution of light, for street light application. Pressure die cast aluminium housing powder coated in graphite grey and toughened glass of IP 65, including necessary fixing arrangements as per site requirements class-1 of model : Freedom of make CG complete all as specified and as directed. MAKE: C&S Cat part No. LTESSE25WLED/ CROMPTON GREAVES/HAVELLS

S&F 30 Watts LED light, recess mounting luminaire with glare free uniform illumination having longer life and less maintenance, size 600mmx600mm, 25000 burning hours including all accessories and fixing arrangements for fixing the light fitting complete all as specified and as directed. MAKE: PHILIPS Cat part No. RC380BLED30S-6500-G4 L60 W60 PSU OD or equivalent in HAVELLS/CROMPTON GREAVES

S&F 3 Watts LED bed side lamp made up of metal and synthetic including all accessories and fixing arrangements for fixing the light fitting complete all as specified and as directed. MAKE: PHILIPS Cat part No. 48042/30/31 or equivalent in HAVELLS/CROMPTON GREAVES

S&F 9 Watts holder type LED lamp 230 Volts, 50Hz complete all as specified and as directed. MAKE: PHILIPS Model: Ace Saver or equivalent in C&S/ HAVELLS/ CROMPTON GREAVES

S&F 12 Watts holder type LED lamp 230 Volts, 50Hz complete all as specified and as directed. MAKE: PHILIPS Model: Stellar Bright High Wattage or equivalent in C&S/ HAVELLS/ CROMPTON GREAVES

S&F plug top, 3 pin, 5 Amps, AC, 230 volts complete all as specified and as directed. MAKE: PHILIPS Model: ECONOMY RANGE 913713678501 or equivalent in ANCHOR/ HAVELLS/ INDO ASIAN

S&F plug top, 3 pin, 16 Amps, AC, 230 volts complete all as specified and as directed. MAKE: PHILIPS Model: ECONOMY RANGE 913713678601 or equivalent in ANCHOR/ HAVELLS/ INDO ASIAN

MS KAMARIKAR CONSTRUCTION

KAPOOR AUTOMOBILES

SACKSON ENTERPRISES

M/s Power Engineering Co

BHARAT MULTITECH INDUSTRIES PVT LTD

KARMAKAR CONSTRUCTION

ISLAND SALES ENTERPRISES