Loading…
Loading…
| # | Company | Amount |
|---|---|---|
| 1 | ₹2.2 Cr |
Tender Value
₹2.6 Cr
EMD Value
₹5.3 L
Closing Date
16 Feb 2026, 3:00 pmClosed
DGM BSBCCL MUZAFFARPUR
DEPUTY GENERAL MANAGER MUZAFFARPUR
BSBCCL, Hospital Road, Sastri Nagar, Patna 800023
ANIL KUMAR
CGM
Construction of Multipurpose Hall (18.5x17.5x12.5) in the Campus of Sri Laxmi Narayan Dubey College, at Motihari, Dist.-East Champaran.
123601
68/BSBCCL/2025-26 GR02
Open Tender
CIVIL
Muzaffarpur
• Payment Receipt (EMD/Tender Fees/Tender Processing Fee)
• Total value of civil engineering construction work, in Rupees, Performed in last five years. (BALANCE SHEET, PROFIT & LOSS AND AUDIT REPORT DULY AUDITED BY CA.) Minimum annual financial turnover (in all classes of civil engineering construction works only) amount of construction work ,which must be at least equal to 50 % of estimated cost of works for which bid has been invited. The turnover will be indexed at the rate of 8% for a year
2020-21
2021-22
2022-23
2023-24
2024-25
• Amount in Rupees related to Work Experience of Similar nature -i) Satisfactory completed at least one similar work of value not less than 50% of estimated Cost (Escalation As per appendix ITB sl no-19) ii) The completion Certificate shall be issued by employer not below the rank of executive engineer or project manager. In case of Private client the completion certificate and valuation of the project issued by employer should be certified by the retired executive engineer/Registered value of Nationalised Bank/Insurance Company/Income Tax Department.
• Qty /Amount As Indicated In Any One Year In Last Five Year (Quantity Executed Must Be Satisfied By Concern Engineer In charge. In case of Private client the quantity executed will be issued by employer should be certified by the retired executive engineer/Registered value of Nationalised Bank/Insurance Company/Income Tax Department.
EARTHWORK + Earth Filling 513.90 CUM
BRICKWORK 75.86 CUM
RCC+PCC 208.10 CUM
FLOORING 123.24 SQM
ELECTRICAL WORK 18.45 Rs in Lac
• Attach Affidavit in Prescribed Format mention in SBD.
• Proposed Methodology of Construction.
• AS PER SEC 2-1.5 MAX. AGE 5 YEARS ATTACHED OWNED VOUCHER /CASH MEMO/INVOICE AND AFFIDAVIT IN CASE OF LEASED/HIRE ON AND AFTER DATE OF TENDER
Type of Equipment Nos. Maxm. Age
Steel Shuttering 2000 Sft 5
Concrete Mixer with Integral weigh Batching facility 1 5
Vibrator (Plate & Niddle) 2 5
Water Tanker 1 5
• AS PER SEC 2-1.6 ATTACHED NECESSARY CERTIFICATE AND CURRENT AFFIDAVIT OF BOTH EMPLOYEE AND EMPLOYER ON AND AFTER DATE OF TENDER
1.Site Engineer / B.E. (Civil) + 03 Years Exp. (3 years in Building Construction) or Diploma in Civil + 7 year Exp. In Building construction or retired A.E. 1 no.
2.Site Supervisor /Fresh Graduate in Civil or Diploma Civil + 02 Years Exp. or retired I.T.I Holder 1 no.
• Litigation History if Any.
• Evidence of accesses to Financial Resources in Rupees-Evidence of access to or availability of credit facilities (10% of estimated cost), certified by bankers (for work under this bid).
• Undertaking -Able to invest a minimum of cost upto 25% of contract value of work. During implementation of contract.
• Registration No.-any Contractor Registered with Central Government/Any State Government/Any Public Sector Undertakings or an agency of National or International repute may tender, but Registration with Building Construction Department will be essential after issue of Letter of Acceptance.
• Experience Certificate of identified Sub Contractor (Electrical/PHE/Furniture) will be valid. Experience Certificate should be issued by at least Executive Engineer and equivalent officer. It is Mandatory to Attached Mutual Affidavit & Registration Certificate of Sub Contractor.
• Legal Status/Place of Registration/Principal Place of Business/Power of Attorney.
• (a) Amount of Existing commitments and ongoing works in Rupees (Bidder must declare themselves their all existing commitment hiding fact be sufficient cause for rejection.)
• (b) Amount of Work for which Bid already submitted, in Rupees.
• ( c ) BIDDING CAPACITY ( BC-AxNx3-B) SHOULD BE MORE THAN BOQ.
• Character Certificate of Bidder If Sub Contactors Affidavit Character Certificate Must Be Attached.
• NOC for Debar.
• GST Registration Certificate, PAN & Aadhar Document.
CIVIL
PERCENTAGE
L1
1
20 documents required · 20 mandatory
₹10,000
Processing Fee: 3540
₹5.3 L
15 May 2026
24 Jan 2026
17 Feb 2026
24 Jan 2026
16 Feb 2026
24 Jan 2026
Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead
Closed timbering over Area
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm diameter holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floor.
Providing and laying in position cement concrete of specified grade.
1:1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
1:2:4 (1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
per 50 kg cement
All work upto plinth level : Concrete of M-25 grade with minimum cement content of 330 kg/cum
All work above Plinth level upto floor V Level : Concrete of M-25 grade with minimum cement content of 330 kg/cum
Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering, finishing and reinforcement, M-20 grade reinforced cement concrete
TMTC-500- 08 mm dia.
TMTC-500- 10 mm dia.
TMTC-500- 12 mm dia.
TMTC-500- 16 mm dia.
TMTC-500- 20 mm dia.
TMTC-500- 25 mm dia.
Foundations, footings, bases of columns etc. for mass concrete.
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
Suspended floors, roots, landings, balcnies and access platform..
Lintels, beams, plinth bams, griders, bressumers and contilevers.
Columns,Pillars, Piers, Abutments, Posts and Struts
Edges of slabs and breaks in floors and walls :
Weather shade,Chajjas, corbels etc. including edges
Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :
Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in
Brick work with bricks of class designation 100A in foundations and plinth in :
Half brick masonry with bricks of class designation 100A
Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete asper the architectural drawings with 18 mm thick stone slab over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete
1:3 (1 cement:3 coarse sand)
1:6(1 cement: 6 coarse sand)
15 mm cement plaster on rough side of single or half brick wall of mix : (1 : 4)
Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Applying priming coat: With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works
Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats)
Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),...
Fixed to steel windows by welding
Fixed to openings/ wooden frames with rawl plugs screws etc
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
Steel work welded in built up section/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required
Supply & fixing of Hi-Rib profiled sheeting 1000-1030 cover width, 28/30 mm crests @ 250-255 mm c/c manufactured out of 0.55 mm TCT hi-tensile Multi Cloured Galvalume steel (AZ-150 gsm. Aluminium-Zinc alloy metallic coating of total both sides 550 Mpa yield stress as per AS-1397). The sheet shall have wide pans with 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on side laps for purlin support. The male end of the sheet shall have anti-capillary flute at side lap to prevent leakages. The sheet shall be passivated and clear resin coated. The sheet shall be fixed by means of galvanised self-drilling self tapping fasteners ( 12-14x55 with EPDM seals). The sheet shall be supplied in lengths maximum upto 6-12 Mtrs long to suit site dimensions
Supply and fixing of Flashing /Ridge/ and gable flashing colour coated up to : Supply and fixing of Flashing /Ridge/ and gable flashing colour coated up to : 300mm - 500 mm girth.
Providing & Fixing GE plastic 600mm dia Turbo Vents of approved make and laying in position as per drawing or as directed by Engineer-in-charge
Providing & Fixing clear polycarbonate sheet 1000 mm wide & 1.5 mm thick of approved make and laying in position as per drawings matching profile with galvalium sheet or as directed by Engineer-in-charge
Supply and fixing of Colour coated gutters with gutter supports, sealnts
Supply and Fixing of down Color coated 0.5mm thk. Sheet take pipe, Pipe flashing band, M.S strip U-clamp with complete accessories in color coated sheet.
147mm international standards maple wooden bona coating flooring (7-layer A++ grade Maple wooden flooring, 22mm thick, 6ft long + 18mm pine board + 40mm runner +10mm rubber pad + 40mm runner +15mm rubber pad) over 150mm VDF flooring. 5.1mm PVC sports flooring (5layers) over Maple flooring is provided. Hova Badminton Rollable Flooring for the Badminton Courts to be installed over the Wooden Flooring.
Providing and fixing soil, waste and vent pipes : Sand cast iron S&S pipe as per IS: 1729
Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :
Carriage of materials
Extra Cost of Materials
Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C.automatic flushing cistern, with fittings, standard size G.I. / PVCflush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required :
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
Meter
Meter
metre
metre
metre
quintal
Providing and fixing C.P brass bib cock of approved quality conforming to IS:8931
Providing and fixing gun metal non- return valve of approved quality (screwed end)
Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1(1 cement: 1 fine sand) including testing of joints etc. complete.
Metre
Metre
Providing and fixing square-mouth S.W gully trap grade 'A' complete with C.I grating brick masonry chamber with water tight C.I cover with frame of 300x300mm size(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
Providing and laying non-pressure NP2 class (light duty) R.CC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2( 1 cement: 2 fine sand) including testing of joints etc. complete.
Metre
metre
metre
metre
metre
metre
S/F/F 1 H.P. Cromption or any other apprioved make Motor and ISI make automatic starter mounted on a common wooden board etc. all complete job.
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc.as required
Metre
Metre
Metre
Supplying and fixing PVC/G.I box of 200mm x 250mm x 60mm deep on surface or in recess with suitable size of phenolic laminated sheet cover in fornt including painting etc as required (Adopter box above each D.B).
Supply & fixing 4 way(4+12) double door TP & N, sheet steel, MCB distribution board, 415 volts, on surface/ in recess, complete with tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc.as required (But without MCB / RCCB / Isolator) light DB
per set
Metre
Metre
Metre
Metre
Meter
Meter
Supply and fixing of TLL 50WATT all in one street light along with MONo Crystalline 50 Wp solar panel and 308 wh Lithium battery aluminium housing , LED rating -50000Hr@LM70, Efficacy Lumen /watt> 130,CRI->70, charge controller. Type MPPT, SENSOR Type -PIR Dusk to down Operation,TLL-jupitor-AIO50 ( In the Campus)
Single arm, 1000 mm
Providing and making steel pole collar with cement concrete 1:3:6 (1 cement:3 coarse : 6 stone aggregate of 20mm )of specified size and shapeincluding form work plastering if required curing etc as required (volume of pole /pipe not to be deducted)
Providing and fixing M.S. pipe to I.S. 1239 (Heavy class) complete with all supports & fittings like, unions, couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. to complete the work as per the requirement at site including painting with one coat of primer after surface preparartion and two coats of synthetic enamel paint, cutting and making good the walls good complete. Pipe upto 40 mm dia threaded joints with holdtite, 50 mm dia and above should be welded joint ( all type) (internal works/External Works).
Meter
Meter
Meter
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as
Providing and fixing first aid fire hose reel drum wall mounting, swinging type(Powder coated finish in fire red) fitted with 20 mm dia. 30 m long high pressure hose(IS:444, Type-2) with 5 mm outlet SS nozzle with shut off valve (IS:8090). complete hose reel drum shall be conforming to IS:884) 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall.
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :
CCTV Network Camera Dome 4 MP (Brand - Hikvision / Bosch / Honeywell) Image Sensor - 1/3" Progressive Scan CMOS, Shutter Speed - 1/3s to 1/10,000 s, Lens - 2.7mm, 4mm, 6mm @ F2.0angle of view: 106°(2.7mm), 83°(4mm), 55.4°(6mm), Day &Night - IR cut filter with auto switch, White Balance - Automatic/Manual, Video Compression - H.264/MJPEG/H.264+, Max. Resolution - 2688×1520, Communication Interface - 1 RJ45 10M/100M Ethernet port, Base T
CCTV Network Camera Bullet 4 MP (Brand - Hikvision / Bosch / Honeywell) Image Sensor - 1/3" Progressive Scan CMOS, Shutter Speed - 1/3s to 1/10,000 s, Lens - 2.7mm, 4mm, 6mm @ F2.0angle of view: 106°(2.7mm), 83°(4mm), 55.4°(6mm), Day &Night - IR cut filter with auto switch, White Balance - Automatic/Manual, Video Compression - H.264 /MJPEG /H.264+, Max. Resolution - 2688×1520, Communication Interface - 1 RJ45 10M/100M Ethernet port, Base T
Display : Screen size – 42 inch or above(LG/Sony/Samsung/ Philips), Panel Technology IPS, Surveillance Monitor
Supply / Installation and Commissioning of 24 Port Network Switch GIGA PoE,IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant,24x10/100/1000 Mbps Auto-MDIX PoE ports,Provides up to 30 watts per PoE port,PoE power budget 370W,4 KV surge protection for PoE ports,IEEE 802.3x flow control support,Plug-and-play installation,8.8 Gbps switching fabric,2.75 Mbits RAM Data Buffer,4K MAC address entries,Sturdy metal enclosure
Meter
Supply Installation Testing & Commissioning of IP Video Storage device shall be a Min 30 days recording,Min RAID-3 protected, all-in-one recording for network surveillance systems It shall be designed for high speed, high capacity Network video storage and high performance play back applications.The video storage array shall have Min 5 internal HDDs (4 x 10TB) Min 4 TB. The storage array shall provide an audible alarm to notify the user in the event of a failure. The system should be such that the vedio recording from camera should be done directly on storage array and directions of Engineer-in-charge. LED indicators Features trayless hard drive insertion Dissipates heat efficiently with aluminum housing. Software configuration if any.Complete in all respects.
Supply fitting fixing Rack 19" 12U fully powder coated complete etc as required with complete accessories (5 amp x 6 socket, wire manager, rack fan) VALRACK/ Netrack make. Wit all necessary items.
ABC Powder Type (Stored Pressure) Fire Extinguisher, 4Kg. Capacity, ISI Mark (IS:15683), squeeze grip valve, operating temperature (+5)° C to (+55)° C for Class 3A type of Fire filled with MAP ABC Powder, Complete in all respect. (Guaranty/Waranty must not be less than 5 years) MAKE:-KALPEX/CEASEFIRE/LIFEGUARD/SAFEAXE etc of Higher grade.
CO2 Type Fire Extinguisher, 4.5 Kg Capacity, ISI Mark (IS:15683), squeeze grip valve, operating temperature (-30)° to (55)° C for Class 13B type of Fire fitted with 1 Mt. Hose & PVC Horn, Complete in all respect.(Guaranty/Waranty must not be less than 5 years) MAKE:-KALPEX/CEASEFIRE/LIFEGUARD/SAFEAXE etc of Higher grade.
Supply, installation, testing and generating set commissioning of Silent Type diesel comprising with diesel engine water cooled, alternator, AMF Control Panel Synchronous single/three phase, acoustic battery with enclosure, charger and related accessories, platform, including PCC 1:2:4 exhaust pipe incoming B class cable with 10 meter, earthing Cu/GI Plate 2 No./2 No., insulation as per CPWD CPCB-4 Norms
Description of Work
12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around
A=n*2*(L+B)*H
Providing & Laying 2.0 mm thick Vinyl Flooring ( Armstrong / Wonderfloor, etc )
DGM BSBCCL Bhagalpur
DESCRIPTION
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc.as required
Point
Metre
Metre
Metre
Metre
Metre
Metre
Supplying and fixing PVC/G.I box of 200mm x 250mm x 60mm deep on surface or in recess with suitable size of phenolic laminated sheet cover in fornt including painting etc as required (Adopter box above each D.B).
Supplying and fixing PVC/G.I box of 75 mm X 75 mm X 50 mm deepdeep on surface or in recess with suitable size of phenolic laminated sheet cover in fornt including painting etc as required (Adopter box above each D.B).
Supplying and fixing 12 modules GI box along with moduler base & cover plate surface or in recess including providing and fixing of 4 nos 6 pin 15/16 amps socket outlet with 4 no 15/16A moduler type switch ,connection etc. as required.
Supply & fixing 4 way(4+12) double door TP & N, sheet steel, MCB distribution board, 415 volts, on surface/ in recess, complete with tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc.as required (But without MCB / RCCB / Isolator) light DB
Supply & fixing 4 way(4+12) double door TP & N, sheet steel, MCB distribution board, 415 volts, on surface/ in recess, complete with tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc.as required (But without MCB / RCCB / Isolator) Power DB
S/F modular blanking plate on the existing modular plate and switch box excluding modular plate as required.
Main Bus Bar: 4 strip 300 amp bus bar made of electrical grade copper strip enclosed in separate bus bar chamber, provided with DMC/ SMC bus bar support duly insulated with heat shrinkable sleeves in distinct colours as reqd: 1 set (1 Amp per sqmm.)
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as per required.
Supplying and fixing Cable end box (Loose wire box, IP43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240/415 V, on surface /recess complete with testing and commissioning etc. as required.
Providing and fixing MV danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
per set
Metre
Metre
Supply & Laying of ISI marked aluminium conductor XLPE insulated cable as per IS 7098, & cable & wirE shall be armoured, served, sheathed 1100 volts grade as per Batra Henley / Havells/ Finolex.
Metre
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
Supply and fixing 100 mm dia medium class GI pipe etc as required.
Supply and Installation of regular/standard module AC ceiling fan of 1400 mm sweep including wiring the down rod of standard length 9 upto 30 cm ) with 1.5 sq mm FR pvc insulated copper conductor etc as required.
Supply and Installation of 300 mm 230volt AC exhaust fan in the existing opening including making good the damage connection testing commissioning etc as required.
Supply and installation of 600 mm, 230 V A.C. wall mounted Air circulator, heavy duty fan including fixing the bracket, making onnection, testing, commissioning etc as required.
Supplying and fixing indoor recess mounting 36 watt LED flat panel luminaire suitable for armstrong/grid ceiling and complete with electronic driver etc. directly on false ceiling including connection with 1.5 sqmm fR PVC insulated copper conductor cable and earthing the body etc as required.
Supplying and fixing 90 watt LED type FLOOD light with die cast aluminium housing for ingress protection of IP65 and complete with all accessories etc and connection with FR PVC insulated copper conductor cable and earthing the body etc. as required
Meter
Meter
Supply and fixing of fire extinguisher, ABC Type 4.00kg. Capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
Supply and fixing of shock treatment chart (prescribed under I. E. rules) duly framed with glass and supported from back with hard board or soft board with supply of all material, labour, T&P for proper completion of work.
Supply and fixing of fire bucket, round bottom made of GI sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per direction of Engineer-in-Charge.
Providing and fixing carbon-di-oxide fire extingushers trolley mounted with all accessories internal discharge tube, high pressure discharge hose, discharge nozzle, suspension bracket, ISI marked as per IS:2878 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.
SITC AC split(1.5 ton) with stabilizer ISI standard as per specification 5 star inverter AC.. ( Make- blue star/mitsubishi/lg/carrier/Hitachi)
Extra copper piping electrical wire for split AC
Extra drain pipe split AC
Supplying and drawing of UTP 4 pair CAT-6 LAN cable in the existing surface/recessed steel /PVC concuitas required.
Category 6 UTP Patch Cords - 1 Mtr Standard Colour - Blue, Grey, Yellow, RJ45 Plug - Polycarbonate plug, Current Rating - 1.5A max, Insulation Resistance - 500MΩ/km(min)@500 Vdc, Contact Resistance - 15 mΩ (max) per contact
Category 6 UTP Patch Cords - 2 Mtr Standard Colour - Blue, Grey, Yellow, RJ45 Plug - Polycarbonate plug, Current Rating - 1.5A max, Insulation Resistance - 500MΩ/km(min)@500 Vdc, Contact Resistance - 15 mΩ (max) per contact
24-port GbE Smart Managed Switch with GbE Uplink Interfaces-24 Ports 10/100/1000Mbps+4 SFP;Port Standards & Functions-IEEE 802.3 10BASE-T Ethernet (twisted-pair copper),IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper),IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper),IEEE 802.3az compliance Auto-negotiation,IEEE 802.3x Flow Control; Full/Half Duplex-Full/half duplex for 10/100 Mbps speeds,Full duplex for Gigabit speed;Media Interface Exchange Auto MDI/MDIX adjustment for all twisted-pair ports;Switching Capacity 56 Gbps; Transmission Method Store-and-forward; MAC Address Table 16,000 entries per device, Maximum 64 bytes packet forwarding rate 41.7 Mpps,Packet Buffer Memory 1.5 MB,Maximum Power Consumption 22.45 watts, Standby Power Consumption 17.84 W/240 V, Acoustics 0 dBA Heat Dissipation 76.55 Btu/hr, Operating Temperature -5 to 50 ˚C (23 to 122 °F), Storage Temperature -20 to 70 ˚C (-4 to 158 °F), Operating Humidity 0% to 95% non-condensing, Storage Humidity 0% to 95% non-condensing, Diagnostic LEDs Link/Activity/Speed (Per 10/100/1000 Mbps port), Certifications CE (LVD) BSMICCC, C-Tick. Netgear / D-link/ Cisco.
Category 6, UTP 24-Port Patch Panel Size - 482.6mm x 44.2 (19’’ x 1U), Panel Material - Steel-fully powder coated, Unshielded - RJ 45, Plug Insertion Cycle - 750 times DC Resistance- 72Ω max, Voltage Rating - 72 Vdc max, Current Rating - 1.5A max
Supply fitting fixing Rack 19" 12U fully powder coated complete etc as required with complete accessories (5 amp x 6 socket, wire manager, rack fan) VALRACK/ Netrack make.
Supplying and fixing of RJ 45 computer socket suitable for Cat 6 on module GI box along with base & cover plate in surface or in recess including making connection, soldering etc. as required.
Smart-UPS On-Line, 30 kW /30 kVA with 30 minutes Backup 12 V 42 AH SMF Battery UPS Toplogy Double Conversion On-Line, Power Rating (VA / Watts) 30000Watts/30000VA, Form Factor Rack/Tower Convertible; Output Power Capacity 30000 Watts/30000 VA, Max Configurable Power 30000Watts/30000VA, Nominal Output Voltage 230V, Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage, Efficiency at Full Load 94.00%, Output Voltage Distortion Less than 3%,Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz,Crest Factor 03:01,Waveform Type Sine Wave, Output Connections (1)*Hard Wire 3-wire (8)*(H N + G) IEC 320 C13(8),Bypass Built-in Bypass, Output Short Circuit Protection Yes,Parallel Redundancy (Option) 1 + 1, Nominal Input Voltage 230V,Input Power Factor>0.98,Input Frequency 40-70Hz,Input Connections Terminal Block, Protection Thermal Circuit Breaker (250VAC/20A), Input voltage range for main operations full load 160 - 285V, Input voltage range for mains operation half load 160-285V, High Voltage withstand Capability 420 VAC, Green Mode Range 210-250 VAC (230 V), Battery Type Mintenance - free sealed Lead-Acid battery with suspended, electrolyte. 12V 42 Ah SMF battery for 30 Min Battery Back up.
SITC of 2MP IR Indoor Dome Fixed Camera- 1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, Color: 0.01 Lux at F1.2, ICR, ONVIF, support H.265, H.264, MJPEG, DWDR, 3D Digital Noise Reduction, Tripple individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, IK10, Edge Anlalytics- Line crossing detection, intrusion detection, Motion detection, video tampering, UL, CE, FCC certified. (DS-2CD3121G0-I (2.8 mm) (Approved Makes: Hikvision/ Honeywell/ Bosch)
SITC of 2MP IR Bullet Fixed Camera -1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F1.2, 0 Lux with IR, ICR, ONVIF (PROFILE S), support H.265, H.264, MJPEG, DWDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, Edge Anlalytics- Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Video tampering, UL, CE, FCC certified. (DS-2CD3021G0-I (2.8 mm) (Approved Makes: Hikvision/ Honeywell/ Bosch)
SITC of 64 ch Network Video Recorder - Connect Up to 64 IP Cameras, Dual OS, Up to 12 Megapixels Resolution, Two independent HDMI outputs, one HDMI output of 4K resolution,1 VGA output with output upto 1920 × 1080, Support H.265, MJPEG, Supports N+1 hot spare system,Supports RAID0, RAID1, RAID5, RAID6 and RAID10 ,Supports HDD hot swap, Supports Dual Power-Redundant, Incoming Bandwidth 320 Mbps, 8 SATA Hard Disks, ANR Technology, 8 SATA interfaces for 8 HDDs and capacity of each HDD upto 6TB, 3 × USB at least 1 × USB with 3.0, Alarm I/O 16/4, RS-485, RS-232, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified. (DS-7764NI-I8) (Approved Makes: Hikvision/ Honeywell/ Bosch)
SITC OF 32" LCD 24X7 Surveillance Monitor
SITC of 16 port Unmanaged Network PoE Switch: 24 port PoE Switch with PoE standard of IEEE 802.3af , IEEE 802.3at, PoE port, Uplink ports (DS-3E0326P-E) (Approved Makes: Hikvision/ Honeywell/ Bosch)
SITC OF Cat-6 Cable: UTP CAT 6, 305 meters,Core diameter: 0.53mm,OFC,CM,white (Approved Makes: Hikvision/ Honeywell/ Bosch)
SITC of 6TB Surveillance Hard Disk (ST6000VX0023) (Approved Makes: Hikvision/ Honeywell/ Bosch)
19" 6U Rack for Switches complete as required
Camera installation and Connectivity.
In-ceiling speaker 6" ceiling loudspeaker. 6/3W @ 100V, 100-15,000Hz, 93dB 1W 1M. Dimensions (L x H): 188mm x 76mm, mounting hole 170mm diameter. White( Surface mount speakers to be provided if no provision for ceiling speakers) Make: Cloud UK, Alfatron, Biamp.
Media player, mixer amplifier with Bluetooth. Supplied with remote control. On board tuner and MP3 player. Inputs: Front panel mic. input with priority function, rear panel balanced mic. input with phantom power. Emergency input function. Dual RCA line inputs. Outputs: RCA aux out. 60W at 70/100V and 4-16 Ohms. 24V backup power input.Make:Biamp, Alfatron.
LCD portable projector, 5,000 lumens, WUXGA, 16,000:1 contrast ratio, Aspect Ratio:16:10, Lens (Throw Ratio)1.6x manual zoom (throw ratio: 1.09–1.77:1), manual focus F 1.60–2.12, f 15.30–24.64 mm, Make: Panasonic, Christe, Barco.
113" Diagonal, 16:10 Aspect Ratio, black border on all sides, matt white fabric, motorised with remote and heavy duty Motor. Make AV-craft, grandview.
Projector ceiling mount 1x2, adjustment option. Make TS, B-Tech, Eqv.
Cable Manager with Power socket and HDMI. Make Logic/ Legrand.
C–HM/HM/ETH–50 ( 50 feet) make Kramer / Extron.
Equipment Rack, with Hardware and lock. Make Valrack/ Custom / Eqv.
SITC of 50 LPH RO Water Purifier alng with RO-AUTO MAX 50 lph, hdrophenumatic tank-10 LPH, Faucet-1 nozzle, accessories- clip, inlet & outlet pipe etc.
Description of Work
Closed timbering over Area
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm diameter holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floor.
Providing and laying in position cement concrete of specified grade.
All work above Plinth level upto floor V Level : Concrete of M-25 grade with minimum cement content of 330 kg/cum
TMTC-500- 08 mm dia.
TMTC-500- 10 mm dia.
TMTC-500- 12 mm dia.
TMTC-500- 16 mm dia.
TMTC-500- 20 mm dia.
Foundations, footings, bases of columns etc. for mass concrete.
Suspended floors, roots, landings, balcnies and access platform..
Lintels, beams, plinth bams, griders, bressumers and contilevers.
Columns,Pillars, Piers, Abutments, Posts and Struts
Weather shade,Chajjas, corbels etc. including edges
Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :
Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in
Brick work with bricks of class designation 100A in foundations and plinth in :
Half brick masonry with bricks of class designation 100A
12 mm cement plaster on rough side of single or half brick wall of mix : (1 : 6)
15 mm cement plaster on rough side of single or half brick wall of mix : (1 : 6)
Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),...
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
Detailing,Engineering,Manufacturing,Painting,Supply,transportation & Erection of steel structure system for PEB structure with Z purlin , sagrods runners , cross bracing clip fastners using 350 MFa grade Hitensible steel. All fabrication work shall be done off-shore (not on site) bolt in connection type and only site assembly shall be done with the help of high strength bolts (HSFG) . All testing and inspection facility shall be in-house to ensure 100% checking and inspection prior to shipment from the fabrication shop. All structure steel shall be min 350 Mpa yield strength of E350 grade or equivalent grade but not less than 350 Mpa as per approval of Engineer in-charge. All anchor bolts shall be high strength HSFG bolts for assembly and electro-galvanized of min. 8.8 grade. Entire steel structure shall be surface finished shot blasted as per SA 2 1/2 followed by applying 2 coat of epoxy base primer each coat of min. 35 micron and 2 coat of final finish epoxy paint shall be applied each of min. 35 micron thickness on entire structure prior to shipment. Final painting can be done at site during installation.All design & drawings shall be per-approved by Engineer in-charge
Supply & fixing of Hi-Rib profiled sheeting 1000-1030 cover width, 28/30 mm crests @ 250-255 mm c/c manufactured out of 0.55 mm TCT hi-tensile Multi Cloured Galvalume steel (AZ-150 gsm. Aluminium-Zinc alloy metallic coating of total both sides 550 Mpa yield stress as per AS-1397). The sheet shall have wide pans with 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on side laps for purlin support. The male end of the sheet shall have anti-capillary flute at side lap to prevent leakages. The sheet shall be passivated and clear resin coated. The sheet shall be fixed by means of galvanised self-drilling self tapping fasteners ( 12-14x55 with EPDM seals). The sheet shall be supplied in lengths maximum upto 6-12 Mtrs long to suit site dimensions
Supply and fixing of Multi Coloured galvalume sheet with screws on cladding.
Supply and fixing of Flashing /Ridge/ and gable flashing colour coated up to : Supply and fixing of Flashing /Ridge/ and gable flashing colour coated up to : 300mm - 500 mm girth.
Providing & Fixing GE plastic 600mm dia Turbo Vents of approved make and laying in position as per drawing or as directed by Engineer-in-charge
Providing & Fixing clear polycarbonate sheet 1000 mm wide & 1.5 mm thick of approved make and laying in position as per drawings matching profile with galvalium sheet or as directed by Engineer-in-charge
Supply and fixing of Colour coated gutters with gutter supports, sealnts
Providing & Fixging MS rain water pipe 100 x 125 mm of approved make in position as per drawings or as directed by Engineer-in-Charge.
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T"...
Providing & Laying 2.0 mm thick Vinyl Flooring ( Armstrong / Wonderfloor, etc )
Providing and fixing soil, waste and vent pipes : Sand cast iron S&S pipe as per IS: 1729
Carriage of materials
Extra Cost of Materials
Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS :7231, with all fittings and floors wherever required :
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
Meter
Meter
metre
metre
metre
quintal
Providing and fixing C.P brass bib cock of approved quality conforming to IS:8931
Providing and fixing gun metal non- return valve of approved quality (screwed end)
metre
metre
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc.as required
Point
Metre
Metre
Metre
Metre
Metre
Metre
Supplying and fixing PVC/G.I box of 200mm x 250mm x 60mm deep on surface or in recess with suitable size of phenolic laminated sheet cover in fornt including painting etc as required (Adopter box above each D.B).
Supplying and fixing PVC/G.I box of 75 mm X 75 mm X 50 mm deepdeep on surface or in recess with suitable size of phenolic laminated sheet cover in fornt including painting etc as required (Adopter box above each D.B).
Supplying and fixing 12 modules GI box along with moduler base & cover plate surface or in recess including providing and fixing of 4 nos 6 pin 15/16 amps socket outlet with 4 no 15/16A moduler type switch ,connection etc. as required.
Supply & fixing 4 way(4+12) double door TP & N, sheet steel, MCB distribution board, 415 volts, on surface/ in recess, complete with tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc.as required (But without MCB / RCCB / Isolator) light DB
Supply & fixing 4 way(4+12) double door TP & N, sheet steel, MCB distribution board, 415 volts, on surface/ in recess, complete with tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc.as required (But without MCB / RCCB / Isolator) Power DB
S/F modular blanking plate on the existing modular plate and switch box excluding modular plate as required.
Main Bus Bar: 4 strip 300 amp bus bar made of electrical grade copper strip enclosed in separate bus bar chamber, provided with DMC/ SMC bus bar support duly insulated with heat shrinkable sleeves in distinct colours as reqd: 1 set (1 Amp per sqmm.)
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as per required.
Supplying and fixing Cable end box (Loose wire box, IP43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240/415 V, on surface /recess complete with testing and commissioning etc. as required.
Providing and fixing MV danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
per set
Metre
Metre
Supply & Laying of ISI marked aluminium conductor XLPE insulated cable as per IS 7098, & cable & wirE shall be armoured, served, sheathed 1100 volts grade as per Batra Henley / Havells/ Finolex.
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
Supply and fixing 100 mm dia medium class GI pipe etc as required.
Supply and Installation of regular/standard module AC ceiling fan of 1400 mm sweep including wiring the down rod of standard length 9 upto 30 cm ) with 1.5 sq mm FR pvc insulated copper conductor etc as required.
Supply and Installation of 300 mm 230volt AC exhaust fan in the existing opening including making good the damage connection testing commissioning etc as required.
Supply and installation of 600 mm, 230 V A.C. wall mounted Air circulator, heavy duty fan including fixing the bracket, making onnection, testing, commissioning etc as required.
Supplying and fixing indoor recess mounting 36 watt LED flat panel luminaire suitable for armstrong/grid ceiling and complete with electronic driver etc. directly on false ceiling including connection with 1.5 sqmm fR PVC insulated copper conductor cable and earthing the body etc as required.
Supplying and fixing 90 watt LED type FLOOD light with die cast aluminium housing for ingress protection of IP65 and complete with all accessories etc and connection with FR PVC insulated copper conductor cable and earthing the body etc. as required
Meter
Meter
Supply and fixing of fire extinguisher, ABC Type 4.00kg. Capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
Supply and fixing of shock treatment chart (prescribed under I. E. rules) duly framed with glass and supported from back with hard board or soft board with supply of all material, labour, T&P for proper completion of work.
Supply and fixing of fire bucket, round bottom made of GI sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per direction of Engineer-in-Charge.
Providing and fixing carbon-di-oxide fire extingushers trolley mounted with all accessories internal discharge tube, high pressure discharge hose, discharge nozzle, suspension bracket, ISI marked as per IS:2878 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.
SITC AC split(1.5 ton) with stabilizer ISI standard as per specification 5 star inverter AC.. ( Make- blue star/mitsubishi/lg/carrier/Hitachi)
Extra copper piping electrical wire for split AC
Extra drain pipe split AC
Supplying and drawing of UTP 4 pair CAT-6 LAN cable in the existing surface/recessed steel /PVC concuitas required.
Category 6 UTP Patch Cords - 1 Mtr Standard Colour - Blue, Grey, Yellow, RJ45 Plug - Polycarbonate plug, Current Rating - 1.5A max, Insulation Resistance - 500MΩ/km(min)@500 Vdc, Contact Resistance - 15 mΩ (max) per contact
Category 6 UTP Patch Cords - 2 Mtr Standard Colour - Blue, Grey, Yellow, RJ45 Plug - Polycarbonate plug, Current Rating - 1.5A max, Insulation Resistance - 500MΩ/km(min)@500 Vdc, Contact Resistance - 15 mΩ (max) per contact
24-port GbE Smart Managed Switch with GbE Uplink Interfaces-24 Ports 10/100/1000Mbps+4 SFP;Port Standards & Functions-IEEE 802.3 10BASE-T Ethernet (twisted-pair copper),IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper),IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper),IEEE 802.3az compliance Auto-negotiation,IEEE 802.3x Flow Control; Full/Half Duplex-Full/half duplex for 10/100 Mbps speeds,Full duplex for Gigabit speed;Media Interface Exchange Auto MDI/MDIX adjustment for all twisted-pair ports;Switching Capacity 56 Gbps; Transmission Method Store-and-forward; MAC Address Table 16,000 entries per device, Maximum 64 bytes packet forwarding rate 41.7 Mpps,Packet Buffer Memory 1.5 MB,Maximum Power Consumption 22.45 watts, Standby Power Consumption 17.84 W/240 V, Acoustics 0 dBA Heat Dissipation 76.55 Btu/hr, Operating Temperature -5 to 50 ˚C (23 to 122 °F), Storage Temperature -20 to 70 ˚C (-4 to 158 °F), Operating Humidity 0% to 95% non-condensing, Storage Humidity 0% to 95% non-condensing, Diagnostic LEDs Link/Activity/Speed (Per 10/100/1000 Mbps port), Certifications CE (LVD) BSMICCC, C-Tick. Netgear / D-link/ Cisco.
Category 6, UTP 24-Port Patch Panel Size - 482.6mm x 44.2 (19’’ x 1U), Panel Material - Steel-fully powder coated, Unshielded - RJ 45, Plug Insertion Cycle - 750 times DC Resistance- 72Ω max, Voltage Rating - 72 Vdc max, Current Rating - 1.5A max
Supply fitting fixing Rack 19" 12U fully powder coated complete etc as required with complete accessories (5 amp x 6 socket, wire manager, rack fan) VALRACK/ Netrack make.
Supplying and fixing of RJ 45 computer socket suitable for Cat 6 on module GI box along with base & cover plate in surface or in recess including making connection, soldering etc. as required.
Smart-UPS On-Line, 30 kW /30 kVA with 30 minutes Backup 12 V 42 AH SMF Battery UPS Toplogy Double Conversion On-Line, Power Rating (VA / Watts) 30000Watts/30000VA, Form Factor Rack/Tower Convertible; Output Power Capacity 30000 Watts/30000 VA, Max Configurable Power 30000Watts/30000VA, Nominal Output Voltage 230V, Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage, Efficiency at Full Load 94.00%, Output Voltage Distortion Less than 3%,Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz,Crest Factor 03:01,Waveform Type Sine Wave, Output Connections (1)*Hard Wire 3-wire (8)*(H N + G) IEC 320 C13(8),Bypass Built-in Bypass, Output Short Circuit Protection Yes,Parallel Redundancy (Option) 1 + 1, Nominal Input Voltage 230V,Input Power Factor>0.98,Input Frequency 40-70Hz,Input Connections Terminal Block, Protection Thermal Circuit Breaker (250VAC/20A), Input voltage range for main operations full load 160 - 285V, Input voltage range for mains operation half load 160-285V, High Voltage withstand Capability 420 VAC, Green Mode Range 210-250 VAC (230 V), Battery Type Mintenance - free sealed Lead-Acid battery with suspended, electrolyte. 12V 42 Ah SMF battery for 30 Min Battery Back up.
SITC of 2MP IR Indoor Dome Fixed Camera- 1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, Color: 0.01 Lux at F1.2, ICR, ONVIF, support H.265, H.264, MJPEG, DWDR, 3D Digital Noise Reduction, Tripple individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, IK10, Edge Anlalytics- Line crossing detection, intrusion detection, Motion detection, video tampering, UL, CE, FCC certified. (DS-2CD3121G0-I (2.8 mm) (Approved Makes: Hikvision/ Honeywell/ Bosch)
SITC of 2MP IR Bullet Fixed Camera -1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F1.2, 0 Lux with IR, ICR, ONVIF (PROFILE S), support H.265, H.264, MJPEG, DWDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, Edge Anlalytics- Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Video tampering, UL, CE, FCC certified. (DS-2CD3021G0-I (2.8 mm) (Approved Makes: Hikvision/ Honeywell/ Bosch)
SITC of 64 ch Network Video Recorder - Connect Up to 64 IP Cameras, Dual OS, Up to 12 Megapixels Resolution, Two independent HDMI outputs, one HDMI output of 4K resolution,1 VGA output with output upto 1920 × 1080, Support H.265, MJPEG, Supports N+1 hot spare system,Supports RAID0, RAID1, RAID5, RAID6 and RAID10 ,Supports HDD hot swap, Supports Dual Power-Redundant, Incoming Bandwidth 320 Mbps, 8 SATA Hard Disks, ANR Technology, 8 SATA interfaces for 8 HDDs and capacity of each HDD upto 6TB, 3 × USB at least 1 × USB with 3.0, Alarm I/O 16/4, RS-485, RS-232, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified. (DS-7764NI-I8) (Approved Makes: Hikvision/ Honeywell/ Bosch)
SITC OF 32" LCD 24X7 Surveillance Monitor
SITC of 16 port Unmanaged Network PoE Switch: 24 port PoE Switch with PoE standard of IEEE 802.3af , IEEE 802.3at, PoE port, Uplink ports (DS-3E0326P-E) (Approved Makes: Hikvision/ Honeywell/ Bosch)
SITC OF Cat-6 Cable: UTP CAT 6, 305 meters,Core diameter: 0.53mm,OFC,CM,white (Approved Makes: Hikvision/ Honeywell/ Bosch)
SITC of 6TB Surveillance Hard Disk (ST6000VX0023) (Approved Makes: Hikvision/ Honeywell/ Bosch)
19" 6U Rack for Switches complete as required
Camera installation and Connectivity.
In-ceiling speaker 6" ceiling loudspeaker. 6/3W @ 100V, 100-15,000Hz, 93dB 1W 1M. Dimensions (L x H): 188mm x 76mm, mounting hole 170mm diameter. White( Surface mount speakers to be provided if no provision for ceiling speakers) Make: Cloud UK, Alfatron, Biamp.
Media player, mixer amplifier with Bluetooth. Supplied with remote control. On board tuner and MP3 player. Inputs: Front panel mic. input with priority function, rear panel balanced mic. input with phantom power. Emergency input function. Dual RCA line inputs. Outputs: RCA aux out. 60W at 70/100V and 4-16 Ohms. 24V backup power input.Make:Biamp, Alfatron.
LCD portable projector, 5,000 lumens, WUXGA, 16,000:1 contrast ratio, Aspect Ratio:16:10, Lens (Throw Ratio)1.6x manual zoom (throw ratio: 1.09–1.77:1), manual focus F 1.60–2.12, f 15.30–24.64 mm, Make: Panasonic, Christe, Barco.
113" Diagonal, 16:10 Aspect Ratio, black border on all sides, matt white fabric, motorised with remote and heavy duty Motor. Make AV-craft, grandview.
Projector ceiling mount 1x2, adjustment option. Make TS, B-Tech, Eqv.
Cable Manager with Power socket and HDMI. Make Logic/ Legrand.
C–HM/HM/ETH–50 ( 50 feet) make Kramer / Extron.
Equipment Rack, with Hardware and lock. Make Valrack/ Custom / Eqv.
SITC of 50 LPH RO Water Purifier alng with RO-AUTO MAX 50 lph, hdrophenumatic tank-10 LPH, Faucet-1 nozzle, accessories- clip, inlet & outlet pipe etc.
Rs (in Lakh)
aoc.json
Purchase Order
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
NIT-68-02.pdf
NIT • 1.68 MB
BOQ LND College Motihari.xls
NIT • 0.34 MB
C1 CORRIGENDUM NIT-68 GR02.PDF
Corrigendum • 0.51 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .