Construction of auditorium block at HIPA Fairlawn Shimla SH Providing radiator and electrical panel etc for central heating system therein

Amount

Supplying, installation, testing & commissioning of forced air radiator fan units construction made of panels inside layer with polyurethane foam insulation of between panels supplied with factory fitted powder coated supply air plenum with acostic insulation, abs/aluminium supply air powder coated extruded grill .Three layer deep heating coil section only with aluminium finned copper tubes ,drain pan ,circular fan having high static pressure & fan motor suitable to operate from 230±10% volt, 50 Hz, single phase power supply complet with arrangement of moudulating control thermostat complete as required.

Supply and installation of M.S. expansion tank 1800 ltrs. capacity fabricated from 6 mm thick MS plates complete with base frame , air vent and insulation as required complete.

Supply and installation of 100 mm Dail type pressure gauge 0 to 10 kg complete with gunmetal stop valve i/c welding complete as required

Supply and installation of M.S. expansion tank 1800 ltrs. capacity fabricated from 6 mm thick MS plates complete with base frame , air vent and insulation as required complete.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, unarmoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-:-

4Core X 10 Sqmm

Single core 240 Sqmm

Providing and fixing of brass valve set size 19mm x 5/8 with strainer one side flare & other side socket end suitable for 95 degre tenperature with teflone seat complete as required

Supply and fixing of high temperature high pressure steel braded flexible pipe with adapter for internal connection of forced air units complete as required

Supply, installation, testing and commissioning of Butter Fly valve with flanges size 75mm complete with flenges high pressure gasket nut bolts complete as required

Supply and fixing of boiler interlocking flow switch working on single phase including all acessories complete as required

Supply installtion testing & commissioning of (Main Electrical control Panel ) MB panel board fabricated from CRCA steel sheet seven tank process powder coated floor mounted sectionlised cubical type with 3 phase 1500 Amp bus bars i/c making the interior connections painting etc. comprising as per following specification.

The panel shall be cubical type multi-tier fully enclosed, floor mounted a and shall be provided.

Supply installation testing and commissioning of power control centre (P.C.C.) and Motor Control Centre (M.C.C.) soft starter as follows:-

Incomer

One No. microprocessor based L&T or approved equal 630Amp. provided with Microprocessor . Relay for over-current and earth faultcomplete with 96x96mm 0-500 volts voltmeter, 0-1500 amperes meter in the main panel. Phase indicating lights with switches including all ASS and VSS and door interlocking kit for safe operation.

Outgoing

For Boiler

250Amp MCCB adjustable rating for Boiler 2Nos

For Hot Water Pumps

Phase sequence Corrector

Interlocking arrangement with boiler

32Amp MCCB 3 Nos

FASD Starter 5 H. P 4 Nos

Motor Protection Relays

On/Off indication 3 sets

For Makeup Water Pumps

16 Amp MCB four pole 2 Nos

Starter 2 HP 2 Nos

On/Off Indication

UNITECH ENGINEERS