REPAIR MAINT OF SUNKEN TREATMENT LEAKAGE SEEPAGE CLEANING OF OVERHEAD TANK AND ALLIED WORK IN ZONE A F AND REPAIR REPLACEMENT TO FLOORING PLASTERING PLUMBING JOINERY SANITARY FITTING AND CERTAIN MISC WORK IN ZONE F OF AGE BR I UNDER GE MIS MHOW

Amount

M & L for brick work with using burnt fly ash bricks modular size, straight or curved on plan exc. 6 m mean radius built in cement mortar (1:6), including demolition of brick work complete all as specified and directed.

All as per item No 1.00 above but except brick.

M & L for rendering 10mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement including taking down of old cement plaster complete all as specified and directed.

M & L for rendering 15mm thick plaster in CM (1:6) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement including taking down of old cement plaster complete all as specified and directed. Note:-The work shall be carried out on buildings upto 12.00m height. The quoted rate shall be inclusive of all necessary scaffolding, lifting arrangement and safety devices as required. No additional payment shall be admissible.

M & L for rendering 15mm thick plaster in CM (1:4) on faces of brick work or concrete surfaces, mixed with liquid WP, finished even and smooth without using extra cement and including of taking down old cement plaster complete all as specified and directed. Note: (a) The work shall be carried out on buildings upto 12.00m height. The quoted rate shall be inclusive of all necessary scaffolding, lifting arrangement and safety devices as required. No additional payment shall be admissible (b) WPC shall be measured and paid separately.

M&l for rendering 5mm thick in on ceiling concrete surface using mortar 1:3 mixed with liquid WPC, finished even and smooth without using extra cement and including of taking down old cement plaster complete all as specified and directed. Note: (a) The work shall be carried out on buildings upto 12.00m height. The quoted rate shall be inclusive of all necessary scaffolding, lifting arrangement and safety devices as required. No additional payment shall be admissible (b) WPC shall be measured and paid separately.

Supply ony liquid water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying a coat of plaster of paris putty of 1 mm thicness to achieved smooth surfaces and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement based paint complete all as specified and directed. Note:-The work shall be carried out on buildings upto 12.00m height. The quoted rate shall be inclusive of all necessary scaffolding, lifting arrangement and safety devices as required. No additional payment shall be admissible.

M&L for preparing new plastered surfaces of wall,pillasters, cornices, chajjas, roof projection etc and applying two coats of weather proof acrylic emulsion paint (colour/pattern as approved) over a coat of primer (X2) complete all as specified and directed. Make of Acrylic emulsion weather coat paint :- Asian (Apex Ultima), Berger (Super coat) or ICI Dulux (weather shield) or the makes/brand/manufacturers as specified in Appendix 'A' of the Particular Specification. Make of primer :- Asian (X2) or the makes/brand/manufacturers as specified in Appendix 'A' of the Particular Specification. Note :- (a) The work shall be carried out on buildings upto 12.00m height. The quoted rate shall be inclusive of all necessary scaffolding work and safety devices as required. No additional payment shall be admissible.(b) Each stage i.e preparation of surfaces,application of primer,application of first coat and application of second coat shall be passed by Engineer-in-Charge (c) Application of Primer and paint shall be carried out through air-less spray machine (Mechanical means) (d) Written Warranty for four years or as per manufacturer's instructions, whichever is more shall be submitted by contractor.

M&L for preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300x200x7mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10 mm thick backing coat on fair faces of brick work in CM (1:4) including dismantling of old tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450x350x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10 mm thick backing coat on fair faces of brick work in CM (1:4) including dismantling of old tiles complete all as specified and directed.

M & L for Non skid ceramic tiles coloured 7 to 8 mm thick (Square / rectangular ) area of each tile exceeding 0.11 Sqm but n. exc 0.18 Sqm, over & including 15mm thick screed bed in CM (1:4) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles and including dismantling of old tiles complete all as specified and directed.

M & L for dark shade vitrified tiles 10mm thick (Square/Rectanguler) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and joined in neat cement slurry and over and including 15mm screed bed in CM 1:6 or with coloured cement to match the tiles and including dismantling of old tiles complete all as specified and directed.

All as per item No 15.00 above but in skirting over & including 10mm thick rendering in CM 1:4.

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete over and including screed bed 15mm thick in CM (1:6) including dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed.

All as per item No 17.00 above but as in skirting over and inlcuding 10mm thick rendering in CM (1:4 )

M & L for machine pressed precast concrete interlocking paver block (glosy finished) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid on 50 mm thick stone dust cushioning laid dry to the profile including dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed. Note: Sand cushioning will be measured & paid seperately.

M&L for stone dust under floors or in foundations including watering and consolidation spreading and levelling in layers n exc. 25 cm thick complete all as specified and as directed.

M& L for Cement concrete type E2, 1:5:10 (using 40mm graded stone aggrregate) in foundations, filling and mass concrete etc including demolition of old PCC complete all as specified and directed

M & L for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) 75mm thick as in flooring, plinth courses etc including demolition of old PCC complete all as specified and directed

M&L for removing the existing APP membrane roof treatment of any description including screed bed /plastering of any thickness and removing the debris outside MD land etc. and carrying out the following roof treatment complete all as specified and as per Manufacture's instructions:- (a) Cleaning the existing roof surface and brushing with neat cement slurry @ 3 Kg per Sqm area al as specified (b) Preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm (c) Cutting out cracks to V- section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified. (d) Applying two coats of tack coat of Industrial bitumen grade of 85/25 at the rate of 1.20 Kg per sqm including cleaning surfaces (1st coat as a bonding material below membrane and 2nd coat on top of membrane (e) APP based polymeric membrane 3mm thick and minimum weighing 3kg/sqm and reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as per Manufacturer instruction (f) Applying two coats of bitumen based aluminium paint @ 0.15 Kg/Sqm for each coat over APP membrain including preparation of surface complete all as specified Note:- Water proofing treatment shall be executed by a qualified team provided by the manufacturer or their authorised applicator.

M&L for complete water proofing treatment to sunken floor surfaces of RCC slab by the following specifications including demolition/taking down and cleaning of old surface as specified and directed :- (a) Demolition of old sunken surfaces complete and cleaniong of all loose particles and apply cement slurry @3.00 kg / sqm on old surfaces by brushing. (b) Provide PCC 1: 1.5:3 type A-0 with using 12.5mm graded stone aggregate in slope of average thickness 50mm on sunken floor slab mixed with and including liquid water proofing compound manufactured by Dr FIXIT or the makes/brand/manufacturers as specified in Appendix 'A' of the Particular Specification, finish the surface even & smooth without using extra cement. (c) Rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sunken floor and sides of (Vertical surface) sunken portion. (d) Applying surfaces of bituminous primer (conforming to IS-3384-1965) @0.40 Kg/Sqm complete. On complete sunken surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/ nahani trap etc including demolition of old sunken complete all as specified and as directed. (e) After laying of all sewage/plumbing pipes with fixtures in position, apply two coats of polymeric based chemical as per manufactures instructions over bottom and sudes of sunken portion upto 600 mm height. (f) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with plyester non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. (g) Filling the sunken floor with PCC 1:5:10 type E-2 using brick aggregate. (h) Fixing of 50 mm dia CPVC pipe projecting 450 mm clear of face outer wall shall be provided to drain out seepage water if any. (g) ) Testing of sunken as per specification mentioned in SSR part-I/ P.S. NOTE : (a) Waterproofing treatment shall be executed by a qualified team provided by the manufacturer or their authorised applicator. (b) Top Floor Area shall be measured for payment.

S&F in repairs wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repairs Vitreous china squatting pan 'Orissa' pattern ' size 580x440mm white, with integral foot rest 'P' or 'S' trap,front or back inlet including connection to trap and to flushing pipe,anti syphonage pipe, etc. Complete making good to floor as existing surface complete all as specified and directed.

S&F in repairs padestal pattern Vitreous china wash down water closet pan white colour, with 110mm PVC(SWR) 'P' Trap including joint run and lead front or back inlet,connection to drain (or out going pipe ) and to flushing pipe antisyphone pipe including plastic water closet seat cover white closed pattern with flat bottom and cover complete all as specified and directed.

S&F in repair of Vitreous China uninal bowl, half stall coloured, with PTMT urinal spreader for fixing with 15 mm dia pipe. type union for discharge pipe, , providing and fixing plugs, bedding urinals against the wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long steel screws, pointing around the urinal back in cement, complete all as specified and directed.

S& F in repairs mild steel chromium plated health fucet with 1.00 to 1.50m SS tube (Length as per site condition) and hook complete all as specified and directed.

S&F in repairs chromium plated jet for EWC with 1.00m S S pipe including necessary GI fitting as required like toir,nipple etc complete all as specified and directed.

S&F in repiar fancy chromium plated two way bib cock of 15mm bor two way bibcock screwed for iron pipe or brass feruulr etc complete all as specified and directed.

S & F in repair of CP brass fancy type 15mm bore bib taps, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified and directed.

S & F in repair 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends complete all as specified and directed.

S & F in repair CP fancy type angle/Stop Valve ,cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed.

S& F in repairs CP Fancy type Angle cock one way, brass chromium plated, fixed to iron pipe or for unions 15mm bore complete all as specified and directed.

S & F in repair CP fancy type concealed valve including cutting chases for concealed water 15mm tubing or fixing old pipe line and making good to the existing surfaces complete all as specified and directed.

S & F in repairs CP Brass Fancy type shower rose 15mm dia with arm 195mm long of approved quality complete all as specified and directed.

S&F CP Grating doom 125mm dia with or without hole chromium plated complete all as specified and directed.

S&F in repairs towel rail 600mm long 20mm dia brass chromium plated D type fixed with wooden guilties embedded in cement mortar (1:3) with MS screws etc complete all as specified and directed.

S & F in repair LDPE pipe 32mm bore fixed to wall/ceiling with bends/elbow complete all as specified and directed.

S&Fin repairs PVC valveless, syphonic action type flushing cistern,low/high level white with inlet ball valve float and handle including brackets complete fixrd in repair capacity of flush 10 ltrs ncluding flush pipe 32mm dia and PVC connection 450mm complete all as specified and directed.

S & F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S & F in repair 15mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S & F in repair PVC waste pipe 32mm fixed to any type of coupling of N. Exc 1.50m length complete all as specified and directed.

S&F rotational moulded polythylene 500 Ltr capacity water storage tank (double layer)(cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore including dismantling/demolition of old PVC/RCC complete all as specified and directed.

S&F in repairs rotational moulded polythylene water storage tanks(double layer), 1000 Ltrs capacity, (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore including dismantling/demolition of old PVC/RCC complete all as specified and directed.

S & F in repairs rotational moulded polythylene water storage tanks(double layer), 2000 Ltrs capacity, (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 25mm bore complete all as specified and directed.

Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 500 Ltrs capacity complete all as specified and directed.

Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 1000 Ltrs capacity complete all as specified and directed.

Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 2000 Ltrs capacity complete all as specified and directed.

S & F in repairs water storage tank Cover any size of Tank capacity complete all as specified and directed.

S & F in repairs gun metal gate valves 25 mm with lever arm screwd both ends for iron pipes complete all as specified and directed.

S & F in repairs gun metal gate valves 20 mm with lever arm screwd both ends for iron pipes complete all as specified and directed.

S & F in repairs heet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

M&L for PVC (SWR) floor trap 100mm dia out let ,plain with grating including jointing with solvent cement complete all as specified and directed.

S & F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover with mild steel/ chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repairs 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified and directed..

S & F in repairs 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified and directed.

S&F PVC (SWR) branch pice, single (Single Y) equal or unequal 110mm size complete all as specified and directed.

S&F PVC ( SWR) bends any radius bore of 110 mm complete all as specified and directed.

S&F PVC ( SWR) bends any radius bore of 75 mm complete all as specified and directed.

S & F in repairs 150mm rain water pipe single socketed in any length with rubber joints laid on wali up to (G+3) storiyard building complete all as specified and directed.

S & F in repairs 15 mm GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors including taking down old pipe complete all as specified and directed.

S & F in repairs 20 mm GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floorsincluding taking down old pipe complete all as specified and directed.

S & F in repairs CPVC pipes SDR 11 fittings in trenches/wall with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 16mm, including taking down old steel/CPVC pipe complete all as specified and directed.

S & F in repairs CPVC pipes SDR 11 fittings in trenches/wal with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs,unions etc.) of nominal bore 20mm, including taking down old steel/CPVC pipe complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frames) not exc 1.5 sqm each, including cutting holes for taking out holdfasts or dismantling brick work(holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish(without any extra cost to Govt), & removing from site complete all as specified and directed.

All as per item No 70.00 above but area exc 1.50 sqm and not exc 4.00 sqm each

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete & removing from site complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet & edges will be painted to match with printed sheet, reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F mild steel butt hinge medium weight 75 mm long complete all as specified and directed.

S&F mild steel butt hinge medium weight 100 mm long complete all as specified and directed.

S&F Aluminium handle cast type, anodised size 150mm long, D type complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts, with bright bolt and fixed 200mm complete all as specified and directed.

S&F in repair curtain rod stainless steel/choromium plated with fixing brackets, side ball stops, rollers, etc complete all as specified and directed.

S&F in repairs 3mm thick ordinary glass sheet quality and glazing with oil putty in square n. exc 0.5 sqm in each pane including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, including scaffolding to reach up to 4 story building complete all as specified and directed.

All as per item No 80.00 above but frosted glass.

M&L for preparation of new steel surfaces and applying two coat synthetic enamel paint of any description not otherwise described over 10 cm width or girth over a coat of primer complete all as specified and directed.

Welding in repairs not exceeding 2.5 cm in length to the thickness of metal to be welded 9mm but N.exc 20mm complete all as specified and as directed.

Dismantling timber scantling 40 sq cm and over in section framed work including rafter, purlin etc of any description complete all as specified and as directed.

S & F Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-w Gde-E-250 Quality-A complete all as specified and directed.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated (profile pattern) steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in\ roof covering/cladding to wall, fixed with self tapping screws and including of dismantling of old sheeting of any thickness complete all as specified complete all as specified and directed.

S & F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in\ roof covering/cladding to wall, fixed with self tapping screws and including of dismantling of old plain or corrugated steel sheeting of any guage all as specified complete all as specified and directed.

M & L for providing and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting complete all as specified and as directed.

M&L for applying two coats of white wash on ceiling including preparation of old surface of ceiling complete all as specified and as directed.

M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over and including a coat of wall putty 1mm thick to achieve even and smooth surfaces complete all as specified and directed

M&L for preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying two coat of cement based paint on old prepared surfaces of walls complete all as specified and directed. The work shall be carried out on buildings upto 12.00m height. The quoted rate shall be inclusive of all necessary scaffolding work , and safety devices as required. No additional payment shall be admissible.

M&L for complete removal of existing treatment of wall,pillasters, cornices, chajjas, roof projection etc and applying two coats of weather proof acrylic emulsion paint (colour/pattern as approved) over a coat of primer (X2) complete all as specified and directed. Make of Acrylic emulsion weather coat paint :- Asian (Apex Ultima), Berger (Super coat) or ICI Dulux (weather shield) or the makes/brand/manufacturers as specified in Appendix 'A' of the Particular Specification. Make of primer :- Asian (X2) or the makes/brand/manufacturers as specified in Appendix 'A' of the Particular Specification. Note :- (a) The work shall be carried out on buildings upto 12.00m height. The quoted rate shall be inclusive of all necessary scaffolding work and safety devices as required. No additional payment shall be admissible.(b) Each stage i.e preparation of surfaces (complete removal), application of primer, application of first coat and application of second coat shall be passed by Engineer-in-Charge (c) Application of Primer and paint shall be carried out through air-less spray machine (Mechanical means) (d) Written Warranty for four years or as per manufacturer's instructions, whichever is more shall be submitted by contractor

S&F structural steel works of Fe 410W (Gde E 250) quality A, as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including painted one shop coat of zinc chromate/red oxide primer paint (including preparation of surface) before fabrication complete all as specified and directed.

S&F factory made steel Window , with side hung shutter including projecting hinges with steel handle, stay complete devetailed or welded complete all as specified and directed.

S&F factory made steel Window , with side hung shutter including projecting hinges with steel handle, stay complete without glazing bar and guard bar devetailed or welded complete all as specified and directed.

S&F factory made pressed steel frames of size 105x60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate etc. complete including bottom of each chowkat to be welded with 02 nos 25x25x3mm angle iron projecting 10cm one either side including one shop coat of red oxide chrome primer & including tarring back of chowkats and holdfasts complete all as specified and directed.

Ditto as per ser item No 96.00 above but frame size125x60mm.

S&F 30mm thick flush shutters, soild core construction, with particle board core and plywood face panels, commercial type with lipping/frame to match complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick factory made 2nd class hard wood, glazed and skelton shutter open rebated and prepared to receive glass, guage, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR 2009 Pt-I Section 8.24(b) supplied and fitted to chowkhats complete all as specified and directed.

S&F 2nd class Hard Wood factory made shutters 35mm thick, plain framed panelled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified and directed.

S&F mild steel butt hings medium weight 100 mm long complete all as specified and directed.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repairs 18/19 mm thick Prelaminated Particle board,interior grade,prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws/nails to timber/steel frame work as in shelves,cup board shutters, book case, writing table stand, shelves etc including fixing of plain fillets square or rectangular of 2nd class hard wood not exc 3 sq.cm in leaping to shutters/shelves compete fixed complete all as specified and directed.

S&F continous piano hanges, mild steel,bright finish or electrogalvanised,width of flap 30mm (when open) fixed with welding complete all as specified and directed.

S & F Hasp & staple size 100 mm, alumium anodised, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and directed.

S & F in repairs Galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples including takingout old wire mesh from steel window and fixing old steel flats and nut complete all as specified and directed.

S & F in repairs 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F in repair 150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed.

S&F in repair 150 mm size aluminium anodized handle complete all as specified and directed.

S & F in repair of mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate complete all as specified and as directed

S&F in repair Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, overall length of cover plate as 150mm complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on wooden surface over one coat of pink primer complete including prepartion of new wooden surfaces over 10cm width or girth complete all as specified and directed.

S & F powder coated Aluminium door with frame and shutter and glazing 5 mm thick tinted glass and 12 mm thick prelaminated partical board exterior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, Aluminium stopper cleats, iron mongary, etc. section of aluminium door shall be of following sizes :- Frame : 100 X 44 X 1.98 mm thick with rawal plug, Middle lock rail : 150 X 44 X 1.98 mm htick Bottom Rail : 150 X 44 X 1.98 mm thick Top Rail/Style : 85 X 44 X 1.98 mm thick, Glazing beading : 0.70 mm thick, Aluminium Handle D type : 150 mm , Aluminium Tower bolt 200 mm long, Mortice lock - 100 mm 4 lever, Aluminium stopper cleat : 02 Nos, shutters sliding / hinge type, complete all as specified and directed including taking down old aluminium door shutter with frame complete all as specified and directed.

S & F powder coated Aluminium door shutter and glazing 5 mm thick tinted glass and 12 mm thick prelaminated partical board exterior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, Aluminium stopper cleats, iron mongary, etc. section of aluminium door shall be of following sizes :- Middle lock rail : 150 X 44 X 1.98 mm htick Bottom Rail : 150 X 44 X 1.98 mm thick Top Rail/Style : 85 X 44 X 1.98 mm thick, Glazing beading : 0.70 mm thick, Aluminium Handle D type : 150 mm , Aluminium Tower bolt 200 mm long, Mortice lock - 100 mm 4 lever, Aluminium stopper cleat : 02 Nos, Hydraulic door closer -01 per leaf shutters sliding / hinge type,all as specified and directed including taking down old aluminium door complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

Complete repair to Aluminium door including adjusting , necessary bedding, clip, rubber beader, repair to floor door closer complete all as specified and directed.

S&F in repairs Aluminium (extruded section) body door closer hydraullicaly regulated designation No 2, universal type suitable for door shutters of 701 to 850mm in width and of weight between 36 and 60kg complete all as specified and directed.

S&F in repair Collapsible steel gates, top hung consisting channel pickets,pivoted flat bars,top and bottom runners brass handles etc as specified ,erected in position and securing runners with holdfasts and brackets complete all as specified and directed

S&F in repairs framed work such as grills,grating etc with ends of bars shoulders and/or rivited/welded in guard bars and similer works confirming to FE.290,Gde-E-165 complete all as specified and directed.

S&F in repairs waste coupling of PTMT (half or full threaded) of bore dia 32 mm discharge pipe complete all as specified and directed.

S&F in repairs brass Phase suitable for CP bib tap, pillar tap, angle valve 15mm dia full turn, half turn as per sample all as specified and directed.

S&F in repairs Vitreous china wash hand basin white , oval type size min 350 mm top dia including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts,flush pipe and joints complete all as specified and directed.

S&F in repairs corner glass shelf of 30mm dia with CP bracket superior quality complete all as specified and directed.

S&F in repairs SS Toilet paper holder complete all as specified and directed.

S&F in repairs CP Urinal spreader of any description for fixing with 15 mm dia pipe complete all as specified and directed.

S&F in repairs vitrious china urinal half stall white coloured with urinal spreader including providing and fixing plugs,securing urinal against wall in cement mortar 1:2 long brass screwd,pointing around urinal back in cement with brackets, flush pipe,grating anf union for discharge pipe complete all as specified and directed.

S&F PVC connection 15mm, 450mm long with nuts and washers complete all as specified and directed.

S&F in repairs PVC body bathroom cabinet with mirror fancy type made out of 5.5mm thick mirror of size 550 x 450mm complete all as specified and directed.

M&L for Granite 20mm thick (Pure black) (tabled rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in colour cement 1;2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screedbed in CM 1:4 edges of slab to be rounded from all sides (including cutting, wastage and polishing) including dismantling of old Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 18-20mm thick and jointed with grey cement slury mixed with pigment to match the shade of the slab incluiding rubbing and polishing over and including 20 mm thick cement screed bed in CM 1:4 complete including dismantling of old Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed.

All as per item No 132.00 above but over and including 10 mm thick rendering in CM 1:4 on vertical surfaces, dado, skirting etc.

M&L for Plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in copings, bed block etc. and in similar works including weathering,slightly rounded or chamfered angles and throating and necessary form works complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in floor/plinth protection laid in suitable panels finished even and fair all as spd . 6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand ( all by weight) including demolition of old PCC work/flooring complete all as specified and directed.

M&L for chequered coloured cement concrete tiles 40cm x 40cm x 25 to 30mm thick glossy finish, set, jointed and pointed in cement slurry in floors with grey pigment cement and pigments incl and over 15mm thick screed bed or bedding layer of CM 1:4 set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles finishcomplete including dismantling of old Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L for cement concrete 1:3:6 Type C-0 (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frames complete all as specified and directed.

m/s ajay chandil (BID ID -3340031)

NIDHI CONSTRUCTION (BID ID -3339804)