Modification of Washrooms

Modification/Renovation/Construction of Washrooms

Providing and laying cinder concrete in cement cinder mix (1:15) proportion using 12.5mm nominal size cinder laid in layers and compacted as directed for filling sunken floors including cost and conveyance of all materials, water to work site seignorage charges and all operational, incidental, labour charges, such as mixing cement & cinder etc., complete for finished item of work.

Labour charges for removal of existing tiled flooring and tiled dadooing from walls including cost and conveyance of all materials ,labour charges and stacking carefully the material for disposal.etc complete.

Flooring with ceramic tiles of size 300mmx300mm,7-8mm thick set over a base coat of cement mortar (1:8) prop thick over a CC bed already laid or R C C roof slab ,including neat cement slurry of honey like consistency spread @3.30kgs per Sqm and jointed with white cement paste mixed with cement paste mixed with pigment of matching shade of tiles including cost & conveyance of all material like glazed tiles and seignior age charge etc .complete for finished item of work.

Providing daddoing to walls with 1st quality glazed plain colored wall tiles of any size and of 5 to 7mm thick of approved make Janson & janson colored and flushed to the wall surface of 1st quality is approved by engineer in charge set over base coat of C.M (1:3) prop , 12mm thick with cement slurry on honey like consistency spread at 3.30 Kgs per Sqm and jointed neatly with white cement paste to full depth mixed with pigment of matching shade of tile including cost of all materials like cement , sand , water and ceramic tiles etc.., complete for finished item of work.

SUNKEN PORTIONS WATER PROOFING Pre Treatment Step: 1) Cleaning and water jetting the entire area. Porosity Reduction 1) Spraying of protekh base which fills the fine pores with crystalline silicate growth. Defect Removal: 1) Sealing of cracks , voids floor wall junctions etc.,with protekta sealant 500 modified mortar. Surface Preparation : 1) Packing of areas alround down taken pipes with protekta sealant 500 modified mortar 2) Brush coat of alastomeric coating protekta flex joint only on the floor wall junction/cracks/areas around down take pipes. Slope making : 1) Brush application of protekta special slurry which has very special chemical , which impregnates through pores and capillaries. This treatment continues upto 300mm of wall height. 2) Lying of cement concrete (1:2:4) proposition with 6-12mm size HBG metal mixed special admixture protekta KR2 125ml/bag of cement. Curing –cum-testing for 10 days Water proofing: 1) spraying of crystallization product protekta base. 2) Brush coat of protekta top seal coat as abrasion & water resistant layer.

Brick masonry for walls in super structure with CM (1:6) Prop with burnt clay bricks of 2nd class traditional size 23x11x7cms from approved source having crushing strength of 40 Kg/Sqm, including cost and conveyance of all materials, water etc. cost of seignorage charges, all labour charges like mixing cement metal scaffolding charges, lift charges, curing etc. complete for finished item of work.

Plastering with CM 2 coats 20mm thick base coat in CM (1:6) prop.16mm thick and top coat and 2nd coat in CM (1:4) prop. Of 4mm thick with dubara sponge finishing, including cost and conveyance of all materials, labour and other incidental charges, including scaffolding charges curing etc.., complete for walls for uneven surface of walls. For finished item of work.

Supplying and fixing white glazed flat back half stall urinals 1st quality conforming to IS: 2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm conforming to IS: 2556-part6, Sec-6-1974 fixed with screws complete Indian make: 590 x 375 x 390 mm.

Supply and fixing of Urinal partition (CERA) for toilets including Transportation cost and conveyance of all materials, labour charges and other incidental charges for finished item of work.

S&F of 15 mm brass body CP finish self closing tap push type conforming to IS 1711.

Supplying & fixing Indian make flat back wash hand basin 1st quality conforming to IS :2556- part -4:1972 with waste fitting like rubber Plug ,chain ,32mm nominal size C.P. fitting with parallel pipe thread conforming to IS 2963-1979 and fitted with 15mm nominal bore chromium plated pillar tap of 1st quality Indian make 400grams seikor / senior / nice /Esso or equivalent complete with standard CI brackets including wooden block :550mm x 400 mm -single C.P.pillar cock.

S&F of 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931.

Supplying and fixing of 15mm PVC connection with brass union nut cp coated etc.

Supply & Fixing 40 mm nominal size dia PVC solid waste pipe outlet.

Supplying and fixing of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw types (ful turn) with internal/External threaded connection conforming to IS8931.

Supply, Installation and commissioning approved make floor mounted Close Coupled wash down EWC conforming toIS:2556 (Part 8)-2004 suit with 'P' or'S' trap with dual flush porcelain cistern fixed onwash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap& 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approved make etc.complete forfinished item ofwork in all respects

Supply and fixing of 110 mm dia 3m long double socket PVC/SWR pipe-4Kgs/Sqcm Ashirvad/Prince/Sudhakar make or any ISI brand etc.., complete.

Supplying and fixing 90mm Dia 3m single socket PVC/SWR pipe-4 Kg / sqcm (Prince / sudhakar / supreme or ISI brand) etc…, complete.

Supply and fixing of 110 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe fittings. (Prince/ Sudhakar/ Kisan/Supreme or any ISI brand).

Supply and fixing of 110 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings. (Prince/ Sudhakar/ Kisan/Supreme or any ISI brand).

Supply and fixing of 110 mm dia - plain Y - UPVC/SWR Pipe fittings. (Prince/ Sudhakar/ Kisan/Supreme or any ISI brand).

Supply and fixing of 90 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe fittings (Prince/ Sudhakar/ Kisan/Supreme or any ISI brand).

Supply and fixing of 90 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings (Prince/ Sudhakar/ Kisan/Supreme or any ISI brand)

Supply and fixing of ashirwad /ajay/astran/flow guard or equivalent CPVC pipe and fittings to meet requirement of ASTM-D 2846 and or produced in CTS(copper tube size) 3/4” ashirwad flow guards SDR11 pipes are made from identical CPVC compounds having physical properties for hot and cold water ISI 5778 of 2007 for following diameter.

Supply and fixing of ashirwad /ajay/astran/flow guard or equivalent CPVC pipe and fittings to meet requirement of ASTM-D 2846 and or produced in CTS(copper tube size) 1 1/2” ashirwad flow guards SDR11 pipes are made from identical CPVC compounds having physical properties for hot and cold water ISI 5778 of 2007 for following diameter.

Supply and fixing of ashirwad CPVC 3/4” Female adapter brass thread (FABT) ,etc complete as directed by the department

Supply and fixing of ashirwad CPVC 1 1/2” Female adapter brass thread (FABT) ,etc complete as directed by the department

Supply and fixing of ashirwad CPVC 3/4” Male adapter brass thread (MABT) ,etc complete as directed by the department

Supply and fixing of ashirwad CPVC 1 1/2” Male adapter brass thread (MABT) ,etc complete as directed by the department

Supply and fixing of ashirwad CPVC 1 ½ “ Ball valve for pipe fittings to meet requirement of ASTM-D 2846 and are produced in CTS(copper tube size) etc complete as directed by the department

Supply and fixing of 4" 101.6mm Nahny Trap -(without jail with inlet) UPVC/SWR pipe fittings ,etc complete and Supply and fixing stainless steel of 4" dia round grating with frame for nahany or floor trap cover with or without hole.,etc complete

Supply and fixing of ashirwad /ajay/astral/flow guard or equivalent CPVC pipe and fittings to meet requirement of ASTM-D 2846 and or produced in CTS (copper tube size) 1/2” to 2" ashirwad flow guards SDR11 and SDR13.5 pipes are made from idental CPVC compounds having physical properties for hot and cold water IS I5778 of 2007 for 3/4 x1/2 inches brass elbow for toilets.

Supplying and fixing of 15 mm brass body premium variety chromium plated finish long neck pillar cock with aerator of not less than 500 grams weight quarter turn spindle confirming to IS8931 and with a warranty of 10years. Etc complete as directed by the department

Supply and fixing of cubicle patition in action tesa board (900mm x 450mm x 400mm) including all accessories and as directed by the department.

Providing and fixing aluminium extruded section body tubular type hydraulic door closer (IS:3564) with double speed adjustment with necessary accessories and screws etc..,complete(Type 3 :width of doors 851 to 1000mm)

Supplying and fixing of 28/30 mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fibre), and the remaining 15% additives, comprising of virgin PVC polymer of K value 58- 60 (Suspension grade), Calcium carbonate and natural fibres (wood powder) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum door density of 650 kg/cum, screw withdrawal strength 1800N (Face) & 900N (Edge), Modulus of Elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with 3mm thick stainless steel 5" butt hinges 3nos with necessary full body threaded star headed counter sunk SS screws SS Aldrops 8" long 2nos, 6" SS Handle and 6" long tower bolt all as per direction of Engineer -in- Charge etc complete as directed by the department.