PROVN OF INTERNAL ROAD CONNECTING MH GAYA AND 468(I) SUPPLY PL ASC AT MILITARY STATION GAYA

Amount

Surface excavation not exc 30 cm deep and averaging 15 cm in hard/dense soil complete all as specified and as directed.

Excavating over areas, n exc 1.5 m deep and getting out in hard/ dense soil complete all as specified and as directed.

Removing excavated material n.exc 50 m distance and depositing where directed at a level n exc 1.5m above the starting point in soil complete all as specified and as directed.

Grubbing up tree trunk girth of tree exc 150 cm but n.exc 200 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site complete all as specified and as directed.

Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick watering, ramming/rolling and finishing to required size, shape, etc. n exc. 1.5 m high from base of soil complete all as specified and as directed.

Rolling and consolidating formation surfaces in cutting by 8 to 12 Tonne power Roller complete all as specified and as directed.

M & L for Soling (or sub base) 200 mm spread thickness with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required camber and gradient complete all as specified and as directed.

M & L for 150mm thick (compacted thickness) in two layers 7.5cm each layer WBM with coarse aggregate of grading (63 to 40mm size) granite trap or basalt, spread, rolled and consolidated to gradient and camber required with power roller complete all as specified & as directed

M & L for preparing surfaces by brushing with wire brushes for removing caked mud etc, sweeping with broom and finally fanning the cleared surface with gunny bags to remove all loose dirt etc on unsurfaced water bound macadam complete all as specified and as directed.

M & L for applying evenly a priming/tack coat with paving bitumen primer of grade VG-30 at 10 Kg per 10 Sqm complete all as specified and as directed.

M & L for 50mm thick premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness) with paving bitumen @ 4% of any penetration complete all as specified and as directed.

M & L for bituminous premix asphaltic semi dense concrete 40mm consolidated thickness with 5.50% binder content by weight of total mix, rolled and compacted to required camber and gradient complete all as specified and as directed.

M & L for providing precast factory made cement concrete M-30 grade road side kerb stone of size (30 x 45)cm x 15 cm thick with and including weathering, slightly rounded or chamfered angles and throating, laid dry and set in cement mortar (1:4) as in road side kerb stone complete all as specified and as directed.

Material and labour for painting centre line, arrow, dashes, letters etc not exc 10cm wide on roads pavement with retro reflective thermoplastic roads marking paint not less than 2mm thick of approved make applied with machine as per manufacturer's instructions including preparation of surfaces complete all as specified and as directed.

M & L for Granular sub base filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

S & F of Solar Road Stud of DARK EYE Model “DHRUV (DA-110) or equivalent with following specifications:- (a) Construction:- Aluminium alloy shell, (b) 100% water proof design according to IP 65. (c) Dimension: 125mm x 125mm x 25mm (shank 60mm) (d) High Efficiency Mono-Crystalline Solar Panel 2.4 V / 0.3 Watt. (e) One Ni-Mh or NI-cd Rechargeable Battery (1.2V / 1600 MA) (f) Six Super Bright LEDs with 10,000 to 18,000 mcd (Millicandela) (g) View Distance: upto 1000 meters (h) Flash Rate: 2Hz or according to requirements. (j) Bearable Weight: 10 Tons approx

S & F of Delineator of Make Dark Eye Model NO SKU: DA-952-GP / of Weight: 765 Gms, red and white combination and other Specification ABS round body fitted with 2 Nos 50 mm or 65 mm dia highly reflective reflectors made out of PMMA and mounted on MS pipe of 50 duly powder coated, anti rust & anti theft steel net complete all as specified and as directed.

S & F of Convex Mirror (100cm) of Make Dark Eye Model no CM-04 of orange colour with fully adjustable bolts and brackets kits combination and mounted on SS pipe of 50mm dia of Grade 304, anti rust & anti theft steel net complete all as specified and as directed. Note:- The kit is robust and tested to withstand winds of up to 183km/h.

S & F of Road Stud of Make Dhruv Dark Eye Model No DA 971 P or equivalent made with Aluminum Stud Two way reflective of Dimension (110 x 128 x 29.5)mm, Aluminum Alloy body Reflective panel - Amber, Red or White complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 as in bedding and sides of Hume pipe complete all as specified and as directed.

M&L for 600 mm dia RCC Hume pipe of NP2 laid and jointed complete with collars complete all as specified and as directed.

M&L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick wall or concrete surfaces with CM (1:4), surface finished even and fair without using extra cement complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregates as in coping including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for preparing surfaces of plastered or unplastered new surface and applying three coats of white wash complete all as specified and as directed.

M & L for hardcore of broken stone boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M & L for machine pressed interlocking tiles of size (300 x 300) x 30 mm thick with grey cement and pigment with and including over 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M & L for 75 mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for 150 mm dia RCC Hume pipe CL NP2 laid and jointed complete with collars complete all as specified and as directed.

S & F of Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and as directed.

Excavation in trenches n exc 1.5m wide n exc 1.5m depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes etc n exc 10sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 as in foundation filling and mass concrete complete all as specified and as directed.

M & L for rendering 10mm thick on fair face of brick wall or concrete surfaces in CM (1:4), surface finished even and smooth with using extra cement complete all as specified and as directed.

Returning filling in, including spreading, levelling, watering and ramming in layers not exc 25cm thick complete all as specified and as directed.

S&F TMT bars 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for use and waste of form work for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and as directed.

M & L for extra for forming fair finished drain or channel 30cm inner girth using extra cement including forms, moulds, mitered /stopped ends etc. complete all as specified and as directed.

M & L for providing precast reinforced cement concrete (1:2:4) type B-1 as in landings, cover slabs (for man holes etc.) and set in CM (1:4) and similar articles with plain faces complete all as specified and as directed.

M & L for Reinforced Cement Concrete type B-1, (1:2:4) using 20mm graded stone aggregate as in Slabs supported on walls, beams and roofs, landings, balconies, canopies, deck slabs complete.complete all as specified and as directed.

Material and labour for sand cushioning for under ground cable with locally available sand for protection of cable including spreading and consolidations, complete all as specified and directed.

Supply and laying in trenches dry well burnt locally available sub class “B” designation 75 bricks over sand cushioning for protection of cable complete all as per specified and directed.

S&F steel tubular swaged poles complete with cast iron base plate finIal tapper plug, bolts, nuts and squed as specified type 410 SP-31(9 mtr long conforming to IS 2713 with and including painting of pole with two coats of aluminium paint over a coat red oxide primer after preparation of surface in colour code complete all as specified and directed. Note:- Excavation, earthwork and PCC for fixing shall be measured and paid seperately.

S&F light fitting bracket including FI clamps made out of 50mm dia light grade GI pipe 1 mtr long bent to shape and size fixed on location using two Nos of (30x5)mm FI clamps made to shape including nuts, bolts & washers complete all as specified and directed.

S&F GI pipe of light grade 50 mm dia fixed on poles as in protection pipe all as specified and directed using (30x5)mm FI clamps made to shape including nuts, bolts & washers complete all as specified and as directed.

Taking out unserviceable cable any type/size from trenches, pole, road, duct etc including necessary joints, unserviceable fittings and pipes etc complete all as specified and as directed.

Supply, laying, testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi stranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of the under following type and sizes including lugs, cable gland etc complete all as specified and directed:- (a) 3.5 core x 35 sqmm (Extg LT panel to security panel)

(a) 4 core x 16 sqmm (Security Panel to Security lights)

(c) 3.5 core x 70 sqmm Note for Srl item No. 47 to 49:- Excavation, earthwork and Protection of cable shall be measured and paid seperately.

Supply and fixing LED street light fitting 72 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including necessary electrical connections from junction box to fitting terminal with 3 core 2.5 sq mm cable complete all as specified and directed by Engr-in-charge. Make : Crompton/Philips/Wipro

S & F Junction Box for Street Lights/ garden lights of size (300 x 250 x 150) mm made out of CRCA sheet 2 mm thick totally enclosed, dust and vermin proof, rain protected slanted roof top, door pasted with rubber gasket, water tight IP 42 protection, single leaf shutter in front having proper locking arrangements, and painted with powder coating paint and suitable size of "connectwell" stud terminal (provision for socket bolting)- 05 Nos suitable for 415 volts, 50 Hz, 3 phase 4 wire internal wiring system including MCB SP 06 amps- 01 No and mounted on security light pole with suitable bracket nuts, bolts complete all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to GI Strip of size (32x6) mm by means of bolts, check nuts and washers of GI and earth wire protected by provision of GI pipe light grade 40mm bore including provn of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded crushed stoned aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron (25x25 x3)mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge plate, common salt and charcoal filling, test pont made out of phosphorous bronze with fixing arrangement, funnel, wiremesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtr, all as per electrical plate No 3 of SSR 2009 Part-I and connection complete all as specified and testing on completion.

M&L Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground.(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr. Below ground level connecting to GI wire 4mm dia size by means of bolts, check nuts and washers of GI and earth wire protected by provision of GI pipe light grade, 15 mm bore including provn of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded crushed stoned aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25 x3mm with lughs 2 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge plate, common salt and charcoal filling, test pont made out of phosphorous bronze with fixing arrangement, funnel, wiremesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtr, all as per electrical plate No 3 of SSR 2009 Part-I and connection all as specified and testing on completion.

Taking up or down steel tubing and connections, 100mm dia including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing and connections, 25mm dia including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing and connections, 20mm dia including cleaning for refixing or removal to store complete all as specified and as directed.

M&L for refixing old steel tubing and connections in new or old position (wall, ceiling, floors etc) of size 100mm dia including necessary GI socket, union, bend, boring/tapping complete all as specified and as directed.

Supply & laying of GI tubing 100mm dia "medium grade" with all fitting laid in trenches/floor complete with all fittings like socket reducers, sockets, bends, union, road crossing, PCC work, pipe holding clamps etc complete laid in trenches/floor complete all as specified and as directed.

Supply & laying of GI tubing 25mm dia "medium grade" with all fitting laid in trenches/floor complete with all fittings like socket reducers, sockets, bends, union, road crossing, PCC work, pipe holding clamps etc complete laid in trenches/floor complete all as specified and as directed.

Supply & laying of GI tubing 20mm dia "medium grade" with all fitting laid in trenches/floor complete with all fittings like socket reducers, sockets, bends, union, road crossing, PCC work, pipe holding clamps etc complete laid in trenches/floor complete all as specified and as directed.

DHEERAJ KRISHNA CONSTRUCTION PVT LTD

SANYOG CONSTRUCTION PRIVATE LIMITED

M/S ABHAY KUMAR AND BROTHERS

MD BUILDER

Vp sanjiv