IAF Wor Furniture Supply

Amount

Sub-Head : -Furniture Impress Main Desk

Comprises of Main Desk , ERU and Pedestal The Main table shall be of size1800 Width mm x 900 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in built key board pull out tray for keeping keyboard of computer. The front modesty panel of the table shall be made up of MDF board of size 1640 mm x 600 mm x 16mm which shall also be duly finished with Veener and PU coating. For personal storage one mobile pedestal (3 drawer unit) shall be provided of size 510 mm Width x 635 mm Height and 445 mm Depth. The storage pedestal shall also be made up of MDF duly finished with veener & final coating of PU. The Side shall be of size 1200mm Width x 445mm Depth x 660 mm Height. The side unit shall be made up of MDF board duly finshed with Veneer and final finish by PU Coating. The design of the side unit shall be such that it can be placed on either side of the main table. The side unit shall contain open space for keeping cpu in extreme right side, one closed storage shutter at extreme left end & open space in the middle with one shelf for keeping files. The thickness of the top of the side unit shall be 25mm Godrej Interio or Equivalent make

Supplying & Fixing in positiion HALO VISITOR CHAIR BACK Pure Leather, Die-Cast Aluminium with buffed Pedestal,KTS Mech 5 Position locking, Soft Top Fixed Arms Overall Dimensions of Chair-Seat Height - min 46.50 width 59 cm Total Height - min 89.50 cm.Width & Depth of Chair as measured from pedestal- Width 59cm and Depth 68.50 cmThe seat should be made up of 1.2 ± 0.1cm. thick hot pressed plywood and upholstered with leather and moulded Polyurethane Foam. Godrej Interio or Equivalent make

VERTICAL FILING CABINETS

Supplying & Fixing in positiion VSDU-8 1830 * 900 * 450 (GLASSDOORFull Ht.) verall Dimensions of VSDU - 8 shall be 900mm(W)x450mm(D )x1830mm(H). The top shall be Metal top (1 mm add in unit height ) . The Rigid Knock Down Construction , Back , Sides and Door shall be made from 0.7 mm high yield strength CRCA ,rest in 0.8 mm CRCA . CRCA - 'D' Grade as per IS-513 . Sliding door arrangement shall have sliding door Overall Dimensions of Chair-Seat Height - min 45.5 to max 55.5cm. Height - min 95.5 to max 105.5 cm.Width & Depth of Chair as measured from pedestal -Width-75.0 cm and Depth-75.0 cm The Cushioned seat assembly consshould be ts of seat outer (material-30% Glass Fiber Nylon)& upholstered Seat inner (material- PolyPropylene) with moulded Polyurethane foam & polyster fabric. The Net Back should be made up of Back outer (material-Glass Fiber Filled Nylon)& Back inner (material- PP) and upholstered using Polyester Mesh fabric with high tenacity yarn. Full Back Size:46.5 cm. (W) x 60.0 cm. (H) Seat Size : 51.0 cm. (W) x 49.0 cm. (D) The HR Polyurethane foam should be moulded with density = 45 +/- 2 kg/m³ and Hardness load 12 +/- 2 kgf for 25% pression.The support spine should be made up of High Pressure Die cast polished hed Aluminum.The armrest should be having two adjustment, Height (6.0±0.5cm) and Depth (6.0±0.5cm). Height adjustment should be provided in Aluminum structure of armrest which should be connected to Aluminum Back spine and should be operated by button. The depth adjustment should be provided in pad which should be fixed to armrest structure. Armrest Top should be made up of PU molded over plastic inner.The adjustable tilting mechanism should be designed with the following features:• 360° revolving type• Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort•

Tilt tension adjustment can be operated in seating position• 5 position Tilt limiter giving option of variable tilt angle to the chair• Seat / back tilting ratio of 1:2• The mechanism housing should be made up of HPDC Aluminum & black powder coated (DFT 40 to 60 micron) Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 3.75±0.1 cm. The Lumbar support assembly should consist of lumbar spine (material-Glass Fiber Filled Nylon) which should be fixed to Aluminum Back spine. The Lumbar pad (material- Poly Propylene) should be fixed to lumbar spine through lumbar Pad support. Lumbar Support Assembly has height adjustmentof 5.0±0.5cm. The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3cm. The pedestal should be High Pressure Die cast polished Aluminum and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter with top hanging arrangement to prevent derailment . Each door shall be provided with2 plastic roller having steel ball bearing for smooth movement of door & less noise .VSDU 8 shall have glass door for visibility of the content . Locking shall be 5 lever cam lock for safe locking . Handle shall be plastic flush & recessed handle . Shelving shall have Height wise adjustable shelf mounting . Uniformly Distributed Load Capacity of the shelf is 40 Kg maximum . VSDU - 8 shall have 4 no. of adjustable full shelves . Accessories optional shall be cradle with pipes for hanging godrej instadex files . Leveler shall be screw type leveler with hex plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns . For VSDU 8 - A4 size box file can be stored vertically on four shelves and clear space above fifth shelf is 220 mm . Godrej Interio or Equivalent make .

VERTICAL FILING CABINETS

Supplying & Fixing in positiion 4 Drawer Filing Cabinets (New) 1320Hx470Wx620DVertical Filing Cabinets whcih use less floor space. Size of 4 Drawer VFC shall be 1320mm(H) X 470mm(W) X 620mm(D). All the components shall be made of CRCA . It should have 1 Point Locking Mechanism and a Rigid Knock Down Construction. The Top, Side & Drawer Front thickness should be 0.7mm. The Frames, Drawer-inside cover and Side Back Side thickness should be 0.6mm. The Back, Bottom and Drawer thickness should be 0.5mm. Easy to grip Full length Recess Handle shall be integrated into Metal Drawer for easy pull out convenience. There shall be a Snap on type plastic label holder on Drawer Fronts. In addition, 28 ‘Ezee’ / ‘Visa’ files (Foolscap) from front to back of thickness 20mm per drawer can be hanged in VFC. The Centralized locking System shall be provided along with Shooting Bolt Mechanism and 10 Lever Cam Lock. The VFC should have anti-tipping arrangement which ensures that when one drawer is opened for use, it does not allow other drawers to be opened. The High Quality Precision Ball Slide shall be provided with Drawer Load capacity of max 40 kg and UDL for 75,000 cycles (BS). Plain Triangular plate pop should be riveted at the bottom corners for rigidity. Optional Accessories like Drawer Partition and Cradle for hanging A4 file folders front to back should also be available. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Godrej Interio or Equivalent make

R K ENTERPRISES