Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.7 LAccepted-AOC BLOCK NO 306 A SAI NIVAS CHOUDHARY CHOWK JARIPATKA NAGPUR 440014 | NAGPUR | NAGPUR | MAHARASHTRA | 440014 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹9.8 L+₹1.1 L (12.8%)Rejected-AOC | L2 | Rejected-AOC Not Lowest | |
| 3 | L3₹11.1 L+₹2.4 L (28.1%)Rejected-AOC | L3 | Rejected-AOC Not lowest |
Tender Value
Refer Docs
EMD Value
₹16,000
Closing Date
31 Oct 2022, 6:00 pmClosed
CWE NAGPUR
Commander Works Engineers Bldg No. P-9, Sitabuldi Fort, Nagpur-440 001 Pin-900419, C/o 56 APO
SPECIAL REPAIR TO ROAD BETWEEN TAGORE HALL WATER TANK TO TRAINING AREA AT NCC OTA KAMPTEE.
2022_MES_555592_1
84750/E8
Open Tender
Civil Works - Roads
Item Rate
120 days
GE KAMPTEE
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE KAMPTEE
₹16,000
Yes
18 Nov 2022
1 Oct 2022
1 Nov 2022
1 Oct 2022
31 Oct 2022
17 Oct 2022
1 Oct 2022 - 13 Oct 2022
Amount
Repair to pot holes any depth, n. exc. 1 sqm each including sweeping with mechanical equipment and making the surface free from dust and mud or water, scoring sunken surfaces in roads, paths, etc. by using pressure air, cutting around edges to atleast 25 mm in depth making good by applying tack coat at 5 kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 Sqm, blinded with 0.09 cum of stone chippings of 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of pot holes exc. 30 mm using paving bitumen, complete all as specified and as directed.
Material and Labour for preparing Unsurfaced WBM by brushing with wire brushes for removing caked mud etc,sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 Sqm using paving bitumen grade VG-10, complete all as specified and directed.
Material and labour for premixed bituminous macadam (consolidated thickness 75mm or less) using with 4% binder content (paving bitumen any penetration of Grade VG-30) by weight of total mix and rolled and compacted to required gradient and camber using 8 to 12 tonne power roller complete all as specified and as directed. Note: The work shall be executed by using hot mix plant & mechanical paver.
Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with mechanical equipment, to remove all loose dirt etc. complete all as specified ans directed.
Material and labour for applying evenly a priming/tack coat with bituminous primer over black top surface at 5 kg per 10 sqm using paving bitumen grade VG-10 on blacktop surface using mechanical sprayer and providing premix asphaltic semi-dense concrete 30mm consolidated thickness with 5.5% binder content (paving bitumen any penetration of grade VG-30) by weight of total mix and 2 % cement filler, rolled and compacted to required camber and gradient , using 8 to 10 tonne power roller complete all as specified ans directed. Note: The work shall be executed by using hot mix plant & mechanical paver. The rate quoted shall be deemed included for cement filler.
Material and labour for Preparation of road surface and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width using 'HOT MARK' thermoplastic modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers thermoplastic requirement for glass beads shall be the Table No 800.4 of MORTH specification including spraying of glass beads etc. all as per manufacture instructions and as specified and directed.
Surface dressing not exceeding 30 cm deep and averaging 15cm deep including getting out in soft/loose soil for road side berms to required gradient, complete all as specified and as directed.
Material and labour for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregates) as in sub bases / pavings complete all as specified and as directed.
Material and labour for sand filling under flooring/ pavement, spread and levelled in layers not exceeding 15 cm thick, complete all as specified and as directed.
Material and labour for 60mm thick, rubber finish on top, M-35 grade, machine pressed precast concrete interlocking paver block of any shape and size as approved conforming to IS 15658-2006 laid, complete all as specified and as directed. Note: Sand cushion will be measured and paid seperately.
Material and Labour for PCC 1 : 3 : 6 Type B1 (using 20 mm graded stone aggregate), as in copings. plinth courses including necessary form work weathering slightly rounded or chamfered angles, throating exposed surfaces finished even and fair complete all as specified and as directed.
M/s KAMAL R AGRAWAL
DIVESH HARISH SIRIAH
Bidder Name
Manoj Jethani
M/s KAMAL R AGRAWAL
DIVESH HARISH SIRIAH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .