SINGAMPUNARI TOWN PANCHAYAT GENERAL FUND 2025-26

Amount

Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc., as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10 with standard specifications.

Plain Cement Concrete 1:4:8 Mix (one Part of cement, four Part of M- Sand and Eight Part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Supplying and erecting centering for sides and soffits including supports and strutting uptp 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90cmx60cm and 10 gauge stiffened, welded with mild steel angles of size 25mmx25x3mm for boarding laid over silver oak (country wood) joist of size 10cmx6.5cm dia spaced about 90cm centre to centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre tocentre etc.complete complying with standard specification and as directed by the departmental engineers. TNBP No.30

For Grade Beam

For Roof Beam&Slab

For Column,Sunshade

Reinforced Cement Concrete 1:1½:3 Mix (One Part of cement, one and half Part of M- Sand and three Part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications. TNDSS NO: 30 V, VI (S3), VII-3.

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

a)Foundation and Basement

b)For Ground Floor

b)For First Floor

Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Plastering in Cement Mortor 1:5 Mix (one cement, five M- Sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Fabricating, supplying and fixing in positon of SOLID PVC DOORS with frames of different sizes as per the specifications given below: PVC door frames made out of best quality PVC extruded section of 40mm * 58 mm * 2.50 mm +/- 0.3 mm thick, having multichamber cross section and duly reinforced with steel to be mitre cut at the corners and welded including providing tie rod at the bottom and necessary weather seal etc., and PVC door shutters made out of extruded plastic section of 60 mm * 24 mm size in the configruation of an "A" section for shutter frames and multi-chamber hollow plastic section of 200 mm *200 mm*1 mm (average thickness) with tongue and groove section for panels etc., with necessary holdfasts, rubber beedings, furniture fittings, locking arrangements etc., complete including dimantling the masnery, making chippings, holes in the RCC column, beam etc., wherever necessary with power drill to the extent required and redoing the same to the original condition after fixing etc., complete as per specifications and as directed by the dePart ofmental officers.

Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam. Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 25GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with spag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown olour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the executive Engineer before use on work

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Paving the floor with best quality vitrified Tiles of following size and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with following best approved quality, white / colour glazed tiles conforming to IS 15622 of 300x200x6 mm sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification

Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality – 10m2.

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light (6 Points Per Coil) (For Rooms like Bath , Toilet,& Pump room etc..)(SD-26)

Supply and fixing of single box type 4'36 W fluorescent fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS Copper leads from terminals to the fitting SD 87

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") SD 106

Supplying and laying of Interlocking Paver Block Stone 83 mm thick Over a base layer of stone dust filling incl. Cost of materials laying and Labour charges etc complete complying with the standardspecification and as directed by the departmental Officers

Manufacturing, supplying and assembling, placing Chairman Dias of 25mm thick Teakwood Planks approved quality, Size Of 75mmx50mm Teakwood For ornamental purpose All shutters and drawers shall be fitted with soft-close hinges / telescopic channels of approved make.Polish : Melamine 6'0"x3'0"x2'6"

Manufacturing, supplying and assembling, placing Chairman Dias of 25mm thick Teakwood Planks approved quality, All shutters and drawers shall be fitted with soft-close hinges / telescopic channels of approved make.Polish : Melamine 5'0"x2'6"x2'6"

Manufacturing, supplying and assembling, placing EO Table of 18mm thick Engineeringwood approved quality, All shutters and drawers shall be fitted with soft-close hinges / telescopic channels of approved make. The exposed edges shall be finished with matching PVC edge banding. Main Table -6'0"x3'0" Runner Table 4'0"x1'6"x2'6"

Manufacturing, supplying and assembling, placing Engineer Table of 18mm thick Engineering wood approved quality, All shutters and drawers shall be fitted with soft-close hinges / telescopic channels of approved make. The exposed edges shall be finished with matching PVC edge banding.Main Table -6'0"x3'0" Runner Table 4'0"x1'6"x2'6"

Manufacturing, supplying and assembling, placing Excecutive Table of 18mm thick Engineeringwood approved quality, All shutters and drawers shall be fitted with soft-close hinges / telescopic channels of approved make. The exposed edges shall be finished with matching PVC edge banding 4'0"x2'0"x2'6"

Manufacturing, supplying and assembling, placing Confrence table of 25mm thick Teakwood Planks approved quality, Size Of 75mmx50mm Teakwood For ornamental purpose All shutters and drawers shall be fitted with soft-close hinges / telescopic channels of approved make.Polish : Melamine 20'0"x2'0"x2'6"

Manufacturing, supplying and assembling, placing Working Station of 18mm thick Engineeringwood approved quality, All shutters and drawers shall be fitted with soft-close hinges / telescopic channels of approved make. The exposed edges shall be finished with matching PVC edge banding. Toughened Clear glass 8mm thick For Working Station Partition With Polished Edges 4'0"x2'0"x4'6"

Manufacturing, supplying and assembling, placing Working Station of 18mm thick Engineeringwood approved quality, All shutters and drawers shall be fitted with soft-close hinges / telescopic channels of approved make. The exposed edges shall be finished with matching PVC edge banding. Toughened Clear glass 8mm 5'0"x3'0"x4'6"

Supply and Delivery of 1.Frame : Iron With Chrome 2.Foam : 32D PU Foam 3.Skin :Breathable polyester mesh 4.Wheel Base : Chrome Base With Hydraulic gas lift

Supply and Delivery of 1.Frame : Iron With Chrome 2.Foam : 32D PU Foam 3.Skin :Breathable polyester mesh 4.Wheel Base : Chrome Base With Hydraulic gas lift

Supply and Delivery of 1.Frame : Iron With Chrome 2. Seat & Backrest Cushion Padding: High-density PU foam Upholstery: Black leatherette (PU leather / synthetic leather) with stitched pattern

Supply and Delivery of 1.Wood :First quality African Teakwood 2.Cushion : PU foam 3.Skin : 350Gsm Fabric 4.Polish : Melamine

Supply and Delivery of 1.Wood :First quality African Teakwood 2.Cushion : PU foam 3.Skin : 350Gsm Fabric 4.Polish : Melamine

Supply and Delivery of 1.Wood :First quality African Teakwood 2.Cushion : PU foam 3.Skin : 350Gsm Fabric 4.Polish : Melamine

Supply and Delivery of Powder Coated Steel Seat, Crome Plated Handles And Legs, Ms Beam In Black Color.

Supply and Delivery of 1.Base Material: MS (Mild Steel) 2.Thickness: Sheets/sections generally range from 0.8 mm to 3 mm depending on load capacity. 3. Surface Finish:Powder-coated 3'0"x1'6"x6'0"

Supplying Fabricating and placing in position of Aluminium natural colour With powder coating finish fixed Partition top half glazed with 5.50mm thick plain glass and bottom half with medium density fibre board of 12mm thick both side pre laminated for cubical and the outer frame of the Aluminium section of size 101.60x44.45x3.18mm @ 2.319Kg/m. at internal vertical 2 Nos & Horizontal 1 No, mullion of aluminium section of size 62 x 38 x 2mm @ 1.174 Kg/m with necessary aluminium clips of size 79.15 x 17.27 x 1.50mm at 0.176 Kg/m with necessary rubbor beading L angles including dismantling and redoing masonry as concrete where necessary etc., complete. The Aluminium section are to be anodised with matt finish under electrically controlled condition in allfdjsfdslk with ISI 1868 / 1962 specification for an average anodie film thickness of not less than 15 microns. All aluminium sections are should be got approved by Engineer incharge before use on works.

SUPPLY & INSTALLATION OF AIR-CONDITIONER WITH COPPER COIL 1.5 TR Split Type AC Unit - 5 Star

SUPPLY & INSTALLATION OF AIR-CONDITIONER WITH COPPER COIL 2.0 TR Split Type AC Unit - 5 Star

Supply and installation of 4 KVA capacity Automatic Voltage Stabilizer with time delay relay

Supply and Fixing of Tamil Brass Letter including Labour Charges 25 Cm

P GOWRIMEENAL (BID ID -1504397)