Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.8 LAccepted-AOC S NO 12 LAXMINAGAR YERWADA PUNE 411006 | PUNE | MAHARASHTRA | 411006 | L1 | Accepted-AOC ACCEPTED BEING LOWEST BIDDER | |
| 2 | L2₹30.7 L+₹3.3 L (12.1%)Rejected-Finance | L2 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER | |
| 3 | L3₹32.9 L+₹5.6 L (20.3%)Rejected-Finance | L3 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER | |
| 4 | L4₹33.3 L+₹6.0 L (21.7%)Rejected-Finance | L4 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER | |
| 5 | L5₹35.0 L+₹7.6 L (27.7%)Rejected-Finance | L5 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER |
Tender Value
₹48.0 L
EMD Value
₹95,940
Closing Date
17 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE KHADKI
Headquarters CWE Khadki, Military Engineer Services, Range Hills Road, Khadki, Pune-411003
MISC B/R REPAIR INCLUDING PLASTERING TILLING ROOFING VALLEY GUTTER AND CONNECTED WORKS IN ZONE A AREA OF AGE B/R -I UNDER GE (CENTRAL) KHADKI
2024_MES_662255_3
CWE/KKE/TOKEN-112 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
KHADKI
AS PER TENDER
6 documents required · 6 mandatory
₹500
Yes
GE CENTRAL KHADKI
₹95,940
Yes
18 Feb 2025
26 Sept 2024
21 Oct 2024
26 Sept 2024
17 Oct 2024
4 Oct 2024
Amount
Dismantling Single or double layer Mangalore pattern or similar tiles on ridge/roofing complete all as specified and as directed.
S&F roof tiles , Mangalore Pattern, inter locking at side joints laid dry complete all as specified and as directed.
All as per item No 2 above but (except) Mangalore tiles complete all as specifed and as directed. (Note: Material shall be used from dismantling)
S&F ridge or hip tiles to suit Mangalore Pattern of roofing tiles bedded and jointed in CM 1:6 complete all as specified and as directed.
All as per item No 4 above but (except) Mangalore tiles complete all as specifed and as directed. (Note: Material shall be used from dismantling)
Dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified and directed.
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings/wall cladding etc complete all as specifed and as directed.
S & F 0.63mm thickness Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts and washers, in roofs, walls etc. with grade of zinc coating 275 etc complete all as specified and directed.
S & F for plain, galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) by using 1.00mm thick sheet grade of zinc coating @120 Gms/Sqm both sides and welded or soldered joints are provided complete all as specified and directed.
S & F second class hard wood clean sawn battens at 30 cm centre to centre and sectional area exceeding 15 and not exceeding 25 Sqcm including dismantling Battens for tiles ,singles etc of any size including tiling fillets spaced exc.15 cm complete all as specified and as directed.
S & F 2nd class H/W plain fillets, rails, rafters, purlins, square, rectangular in section clean sawn secured with nails brads exc 13 sqcm but n exc 25 sqcm and preparation of surfaces of wood and wood-based material, new or old of any decription and girth and treated with two coats of creosote including dismantling timber scantlings in fillets, rails, posts, rafters, purlins etc under 40 sq. cm in section (Unframed work) in any position complete all as specified and as directed.
Dismantaling timber in scantling 40 sq.cm and over in section in any position and any description unframed wk or unframed work.
S&F timber work second class hard wood clean sawn in scantlings, complete all as specified and directed.
S&F 2nd class hard wood 20mm thick, Boarding in roofs, ceilings, partitions, fascia barge, soffits (except flooring and skirting) planned one side, and similar work and preparaton of new or previously untreated wooden surface of any description over10 cm in width or girth and applying two coats of synthetic enamel paint over a cost of pink primer including dismantling complete all as specified and directed.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as as specified and as directed.
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws complate all as specifed and as specified.
S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. Fixed with coach screws L-type or J -type or cranked hook bolts
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specifed and as directed.
S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 -W (Gde-E- 250) quality-A etc complete all as specifed and as directed.
Taking down steel shutter with chowkhat exc. 1.00 Sqm but n.exc. 2.00 Sqm each and removing from site complete all as directed by Engineer-in-Charge.
Taking down chowkhat or frame n.exc. 1.5 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed.
S&F for powder coated aluminium sliding windows having three Nos of tracks including one wire glazed shutters for mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm and two Nos glass shutters including 4mm thick coloured glass and aluminium section weight n.less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall complete. Brown coating or any other as per directed by Engr-in-Charge
S& F for powder coated aluminium door made out of hollow extruded aluminium section as mentioned below. Each door having 02 Nos disc or D type handels, 02 Nos aluminium tower bolts 200 mm size one aluminium sliding door bolt or 250mm size, one brass mortice lock of six levers with key in duplicate regulated by double action hydrolic floor door spring (Make Sandhu/TITZ) shutter to be partly glazed with 5 mm thick tinted glass and partly paneled with 12 mm thick pre laminated particle board fixed with glazing clips, rubber beading/gasket anodized aluminium beading screws complete. Chowkhat Frame : 101.60x44.45x1.55 mm Shutter verticle/stile: 85.00x44.45x1.56 mm Shutter middle rail : 83.50x44.45x1.54 mm Shutter top and bottom rail : 110x44.45x1.54 mm
S& F powder coated aluminuiim partitions wall including anchorage rod, aluminium cleats, drilling, punching, plastering, and making good to the existing surfaces and comprising of following specification as directed :- (a) aluminium section of size 49.91x44.45x2.00 mm thick (b) 5 mm thick tinted glass with aluminium galzing clips and rubber beads, area not exceedings 1.5 sqm (c) 12 mm thick both side prelaminated particle baord fixed with aluminium clips and rubber beads complete all as specified and directed
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II.
Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.
Stainless steel 100 mm size butt hinges, medium weight complete all as specified and as directed.
Aluminium handles 150 mm long, cast type anodised complete all as specified and as directed.
Aluminium anodised barrel tower bolt 200mm long complete all as specified and as directed.
S&F for stainless steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long
S & F in repair Rotational moulded polythylene water storage tanks 1000 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specifed and as directed.
S & F in repair Rotational moulded polythylene water storage tanks 500 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specifed and as directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, PVC panelling etc) or insulation boards /slabs/blankets any thickness, including cover fillets complete all as specified and as directed. Note : Accordingly, Sch of Credit to be changed.
M & L PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as as per direction of Engineer-in-Charge.
Demolition of cement concrete (unreinforced) in ground floor or pavings n exc 15 cm thickness (below or above ground level or any floor level) complete all as specified and directed by Engr-in-Charge.
M & L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in sub base for levelling/above sub base etc complete all as specified and directed by Engr-in-Charge.
M & L for 300/450mm or 600x300mm glazed coloured ceramic wall tiles 7 to 8mm thick on vertical surface such as in skirting/dado etc over and including 10 mm thick cement plaster in CM 1:4, including dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M &L for 600x600mm glazed ceramic floor tiles 7 to8 mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6), including dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for 600x600mm glazed ceramic wall tiles 7to 10mm thick in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cement mortar (1:4), including dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
S&Ffor 600x600mm /1200 x 600mm glazed vitrified floor tiles 7 to 10mm thick in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete over and including 15mm thick screed bed in CM (1:6) including dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
S&Ffor 600X600mm /1200x600mm glazed vitrified wall tiles 7 to 10mm thick in skirting or dadoes etc, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete over and including 10mm thick rendering in CM (1:4) including dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed
M&l for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement Screed base in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
S & F for ready made pully operated clothes drying system incl of four aluminium pipes of 2.7 RM long each (4 pipe set), outer dia 22 mm and inner dia 19.8 mm chanel assembles, locking system ropes alongwith L angle for fixing/ mounting materials complete all as specified and as directed by Engr-in-charge.
S&F in repair E -Board false ceiling 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction, including taking down old/ existing ceiling boards any type (fibre, pulp insulation etc) or inslutation boards any thickness incl fillets complete all as directed.
M/S KISHAN CONSTRUCTION (BID ID -3134320)
Shri Sant Cosntruction (BID ID -3135529)
S P DEVELOPERS (BID ID -3135706)
V.R.PRAJAPATI AND CO. (BID ID -3134495)
S.R.M.K Enterprises (BID ID -3135743)
JP ENTERPRISES (BID ID -3135134)
MAHESH DADAJI BACHHAV (BID ID -3141895)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .