Annual rates contract for misc. civil maintenance work within BVFCL factory area for a period of one year

Amount

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.50M in width as well as 10 Sqm on plan) including disposal of excavated earth lead up to 50M and lift upto 1.50m and disposed earth

(a) In or under foul condition including pumping out water as required

(b) Extra for every additional lift of 1.50 m or part thereof in all kinds of soil

Supply & filling in plinth with local river sand under floors including watering, ramming, consolidation and dressing complete.

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.50m

Supplying and stacking of sandy gravel in measurable stack and then spreading at working watering, ramming, consolidation and dressing complete as per the direction of Engineer-In-charge.

Cleaning of storm water drains beyond a bed depth of 45 CM in side factory area to maintain smooth flow of water including disposal of rubbish upto a distance of 50M lead outside the periphery of area cleared.

Cleaning underground drains/ culverts/ pipes of various diametre and gutters at higher altitude to maintain smooth flow of water including disposal of rubbish upto a distance of 50M lead outside the periphery of area cleared.

Cleaning of the gratings of all the out let drains of N-III and N-II main drain on both inside and out side of boundary walls including removal of floating materials, algees or moss, garbage and other foreign materials through out the day , even at odd hours (Mid

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. (a) All kinds of soil

Mechanical carriage of excavated earth, dismantled building materials, grasses, shrubs and other rubbish including loading, unloading and stacking / spreading at designated site within factory premises - 20% void shall be deducted.

Engagement of manpower for miscellenous civil work as per the direction of Engineer-In-Charge

Dismantling RCC works including stacking of reclaimed MS reinforcement & disposal of unserviceable materials up to a distance of 50 M lead outside the periphery of area cleared

Dismantling CC works including disposal of unserviceable materials up to a distance of 50 M lead outside the periphery of area cleared

Dismantling brick work manually / by mechanical means in cement mortar including stacking of serviceable materials and disposal of unserviceable materials upto a distance of 50 m lead as per the direction of EIC.

Dismantling stone rubble masonary manually / by maechanical means in cement mortar including stacking of serviceable materials and disposal of unserviceable materials upto a distance of 50M lead as per the direction of EIC.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 m lead

Removing mortar from and cleaning bricks (stacks of cleaned bricks shall be measured)

Providing & laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering and reinforcement - all work upto plinth level RCC 1:2:4 (1 cement : 2 river sand : 4 stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding the cost of centering, shutter RCC 1:1.5:3 (1 cement : 2 river sand : 4 stone aggregate 20 mm nominal size) above plinth level

Providing and laying in position cement concrete of specified grade CC 1 : 3 : 6 ( 1 Cement : 3 river sand : 6 Stone aggregate 20mm nominal size) excluding the cost of centering & shuttering - All work upto plinth level

Providing and laying in position cement concrete of specified grade CC 1 : 4 : 8 ( 1 Cement : 4 river sand : 8 Stone aggregate 40 mm nominal size) excluding the cost of centering & shuttering - All work upto plinth level

Providing & laying cement concrete 1:2:4 (1 cement : 2 river sand : 4 stone aggregate 20 mm nominal size) up to plinth level excluding the cost of centering and shuttering.

25 mm cement concrete flooring 1:2:4 (1 cement : 2 river sand : 4 stone aggregate 12.50 mm nominal size) finished with a floating coat of neat cement

40 mm cement concrete flooring 1:2:4 (1 cement : 2 river sand : 4 stone aggregate 12.50 mm nominal size) finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. complete

Reinforcement for RCC work including bending, binding and placing in position complete

Labour rate for reinforcement for RCC work including bending, binding and placing in position complete

Providing & fixing up to first floor level precast reinforced cement concrete 1:2:4 (1 cement : 2 river sand : 4 stone aggregate) including finishing and plastering with cement plaster 1:3 (1 cement : 3 local river sand) of thickness not exceeding 6 mm on

Centering and shuttering including strutting, propping etc and removal of form work for: (a) Foundation, footings, bases of columns etc. for mass concrete

Centering and shuttering including strutting, propping etc and removal of form work for: (b) Columns, piers, abutments, posts and struts

Centering and shuttering including strutting, propping etc and removal of form work for: © Lintels, beams, plinth beams, girders, bressumers and cantilever

Leaving pockets in RCC or CC work with wooden blocks / planks or by other means as directed by the Engineer in charge at site including painting with bitumen etc. all complete upto 700 mm depth. a) Size upto 300 x 300 mm.

Pucca brick work in foundation and plinth using common burnt clay local best quality bricks in cement mortar 1: 6 (1 cement : 6 river sand) including curing etc. complete .

Extra for brick work with local best quality bricks in superstructure above plint & up to floor 5 level in all shapes & sizes in cement mortar 1: 6 (1 cement : 6 river sand) including curing etc.

Random rubble masonary with available boulders in foundation and plinth including levelling with cement concrete 1:6:12 (1 cement: 6 local river sand : 12 graded stone 20 mm nominal size at plinth level with cement mortar 1:6 (1 cement : 6 Local river sand

Random rubble masonary with available boulders in super structure above plinth including levelling and upto floor five level with cement concrete 1:6:12 (1 cement: 6 local river sand : 12 graded stone 20 mm nominal size at plinth level with ceme

Half brick masonary with local best quality bricks in superstructures above plinth level upto floor five level in cement mortar 1: 4 (1 cement : 4 river sand).

12 mm cement plaster of mix 1 : 6 (1 cement : 6 river sand) at all height .

15 mm cement plaster of mix (a) 1 : 6 (1 cement : 6 river sand) at all height

Neat cement punning at all height .

Carriage of cement filled 50 kg. bag from BVFCL store to different working sites inside factory

Repairing of RCC chajjas & parapet walls etc. with 12 mm cement plaster of mix 1:4 (1 cement : 4 river sand) with a floating coat of neat cement including preparation of surface at all height as per the direction of EIC

Repairs to plaster of thickness 12mm to 20mm in patches of 2.50 sqm & under including cutting the patch in proper shape and preparing and plastering, finishing of walls complete including the surface rubbish to the dumping ground as per the direction of EIC

Providing and laying 60mm thick factory made cement concrete paverblock of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed ofcoarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Dismantling of wooden / MS doors, windows and clerestory windows shutters of area 3 Sqm. & below including frames; hold fast etc. complete and stacking of serviceable materials and disposal of unserviceable materials up to Township maintenance store

Taking out doors, windows and clerestory window shutters (Steel or wood) of area 3 Sqm & below including stacking at our store

Dismantling wood work in frames, trusses, purlins and rafters up to 10 M span and 5 M height of sectional area 40 Sq CM & above including stacking the materials at our store

Providing wood work in frames of doors, windows, clerestory windows and other frames, wroughed frame of locally available best quality wood and fixed in position

Labour rate for wood work in frames of doors, windows, celetory windows and other frames wroughed, framed and fixed in position- .

Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position

Providing and fixing 40 x 5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedded in cement concrete block 30 x 10 x 15cm with cement concrete of mix 1 : 3 : 6 (1 cement : 3 river sand : 6

Providing and fixing 40 x 3 mm flat iron hold fast 20 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedded in cement concrete block 30 x 10 x 15cm with cement concrete of mix 1 : 3 : 6 (1 cement : 3 river sand : 6

Supplying MS Bolts & Nuts with washer of different diameter as per site requirement

Providing and fixing ISI marked flush door shutters confirming to IS:2202 (Part-1), non decorative type , core or block board construction with frames of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands (i) 25 mm thick

Providing and fixing ISI marked flush door shutters confirming to IS:2202 (Part-1), non decorative type , core or block board construction with frames of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands (ii) 30 mm thick

Providing and fixing ISI marked 19 mm thick water proof block board door shutters confirming to IS including oxidised MS hinges with necessary MS screws.

Repairs to flush doors shutter or cupboard shutter by fixing 3 mm ply to the damaged portion of door with nails at 100 mm C/C & use of approved quality adhesive finished smooth complete in all respect as per the direction of Engineer-In-charge

Providing and fixing approved quality MS pressed butt hinges bright finished with necessary screws etc. complete:(a) 125 x 65 x 2.12 mm

Providing and fixing approved quality MS pressed butt hinges bright finished with necessary screws etc. complete:(b) 100 x 58 x 1.90 mm

Providing and fixing approved quality MS pressed butt hinges bright finished with necessary screws etc. complete:(c) 75 x 47 x 1.70 mm

Providing and fixing approved quality MS bright finished handle with necessary screws etc. complete:(a) 75 mm

Providing and fixing approved quality MS bright finished handle with necessary screws etc. complete:(b) 100 mm

Providing & fixing oxidised approved quality MS tower bolts with necessary screws etc. complete :(a) 100 x 10 mm

Providing & fixing oxidised approved quality MS tower bolts with necessary screws etc. complete :(b) 150 x 10 mm

Providing & fixing approved quality oxidised MS sliding door bolts with nuts & bolts etc. complete:(a) 250 x 16 mm

Providing & fixing approved quality oxidised MS sliding door bolts with nuts & bolts etc. complete:(b) 300 x 16 mm

Repairs to all types of wooden doors by fixing aluminium plain sheet to the damaged portion of door with nails at 100 mm c/c finished smooth complete in all respect as per the direction of Engineer-In-charge.

Renewing approved quality glass panes with putty / wooden fillets and nails where ever necessary (a) 3 mm thick @ 7.50 Kg/Sqm

Renewing approved quality glass panes with putty / wooden fillets and nails where ever necessary (b) 4mm thick @ 10 Kgs/ Sqm

Renewal of old putty of glass panes (Length)

Supplying & fixing new wooden fillets where ever necessary of local best quality wood

Labour rate for minor repairing of wooden doors , windows and ventilators like re-alignment of shutters, refixing of hinges etc. to make it free for operation as per the direction of Engineer-In- Charge (Repalced fittings & timbers shall be paid separately

Providing and fixing 30 mm thick glazed shutters for doors, windows & clerestorty windows of local best quality wood using 4 mm float glass panes including black enamelled ISI marked MS butt hinges with necessary screws

Dismantling CGI roofing including ridges, hips valleys and gutters etc. and stacking the material within 50 M lead.

Dismantling AC Plain or corrugated / transparent sheets in roofing including ridges, hips, valleys and gutters etc. and stacking the material within 50 m lead

Providing & fixing asbestos cement 6 mm thick corrugated sheets in roofing & side cladding and fixing with GI J or L hooks, bolts & nuts 8mm dia including GI plain & bitumen washers complete at all height excluding the cost of purlins, rafters, trusses (a) Height up to 5.00 M

Providing & fixing asbestos cement 6 mm thick corrugated sheets in roofing & side cladding and fixing with GI J or L hooks, bolts & nuts 8mm dia including GI plain & bitumen washers complete at all height excluding the cost of purlins, rafters, trusses (b) Height above 5.00 M & upto 10.00 M

Providing & fixing asbestos cement 6 mm thick corrugated sheets in roofing & side cladding and fixing with GI J or L hooks, bolts & nuts 8mm dia including GI plain & bitumen washers complete at all height excluding the cost of purlins, rafters, trusses © Height above 10.00 M & up to 15.00 M

Providing & fixing asbestos cement 6 mm thick corrugated sheets in roofing & side cladding and fixing with GI J or L hooks, bolts & nuts 8mm dia including GI plain & bitumen washers complete at all height excluding the cost of purlins, rafters, trusses (d) Height above 15.00 M & up to 25.00 M.

Providing & fixing AC ridges & hips in asbestos cement sheet roofing at all height

Providing and fixing 0.63 mm thick with zinc coating corrugated CGI sheets not less then 275 gm per SQM in roofing and site cladding fix with galvanised iron J or I hooks or bolts and nuts 8mm diameter with bitumen and GI limpet washer or GI limpet washers filled with white lead complete excluding the cost of purlins , rafter and trusses .

Providing & fixing plain AC sheet of approved quality with necessary screws / nails etc. complete at all height (frame work to be paid separately) (a) 4mm thick sheet

Providing & fixing wooden beading of size 50 x 12 mm of local hard wood in ceiling to support AC plain sheet at all height including nailing at 100 mm C/C as per the direction of Engineer - In- Charge.

Labour rate for fixing corrugated AC / CGI / Aluminium / translusent sheets in roofing / ceiling and in side cladding fixed with galvanised iron J or L hooks, bolts & nuts of 8mm dia with GI plain & bitumen washers complete excluding the cost of purlins,(a) Height up to 5.00 M

Labour rate for fixing corrugated AC / CGI / Aluminium / translusent sheets in roofing / ceiling and in side cladding fixed with galvanised iron J or L hooks, bolts & nuts of 8mm dia with GI plain & bitumen washers complete excluding the cost of purlins,(b) Height above 5.00 M & upto 10.00 M

Labour rate for fixing corrugated AC / CGI / Aluminium / translusent sheets in roofing / ceiling and in side cladding fixed with galvanised iron J or L hooks, bolts & nuts of 8mm dia with GI plain & bitumen washers complete excluding the cost of purlins,© Height above 10.00 M & up to 15.00 M

Labour rate for fixing corrugated AC / CGI / Aluminium / translusent sheets in roofing / ceiling and in side cladding fixed with galvanised iron J or L hooks, bolts & nuts of 8mm dia with GI plain & bitumen washers complete excluding the cost of purlins,(d) Height above 15.00 M & up to 25.00 M.

Replacement of 8 mm dia GI J or L hooks in roofing / side cladding including fitting and fixing etc all complete at all heights

Steel work in single section fixed with or without connecting plates but including cutting, welding, hoisting, fixing in position all complete in Tee, channels & angles

Labour rate for steel work in single section fixed with or without connecting plates or in tublar section but including cutting, welding, hoisting, fixing in position all complete in Tee, channels & angles

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts,cutting rivets, welding etc. dismembering and stacking within 50 M lead

Providing & fixing MS grating of required size and shape as per the direction of EIC and site condition including fixing of the same after one coat painting with approved quality of primer and two coats of black anticorrosive bitumenstic paint

Providing and fixing on wall face unplasticised rigid PVC rain water pipe conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion - single socketed pipes of diameter 150 mm (a) 110MM diameter.

Providing and fixing on wall face unplasticised rigid PVC rain water pipe conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion - single socketed pipes of diameter 150 mm (b) 150 MM diameter.

Providing & fixing on wall face unplasticised rigid PVC moulded fittings / accessories unplasticised rigid PVC rain water pipes confirming to IS-13592 type A including jointing with seal ring confirming IS -5382 leaving 10 mm gap for thermal expansion (i) Bend - (a) 110 mm dia.

Providing & fixing on wall face unplasticised rigid PVC moulded fittings / accessories unplasticised rigid PVC rain water pipes confirming to IS-13592 type A including jointing with seal ring confirming IS -5382 leaving 10 mm gap for thermal expansion (i) Bend - (b) 150 mm dia.

Applying tack coat using hot straight run bitumen of grade VG -10, including heating the bitumen, Scaffolding, cleaning and preparing the existing surface of RCC roof including Removal Of stone grits etc. and Chajjas etc. up to the height of 12.00 meter and spraying the bitumen as per specification @ 1 kg / per SQM or as per the instruction of EIC including the cost of scaffolding and fuel for heating bitumen (Bitumen Shall be Supplied free of cost from BVFCL store ):

Providing & fixing approved quality white viterous china water closet squating pan (Indian type WC Pan) size 580 mm including making all connections but excluding the cost of fittings

Providing & fixing White vitreous china water closet squatting pan(Indian type) along with "S" or "P" trap including dismantling of oldWC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern WC pan

Providing & fixing a pair of white vitreous china 250 x 130 x 30 mm foot rests of standard pattern for squatting pan closet or urinal basin

Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required :

Providing & fixing white solid plastic seat with lid for pedestal type WC pan complete

Providing & fixing approved quality 10 litres low / high level PVC cistern with manually control device (Handle lever) confirming to IS-7231 with all fittings and fixtures complete

Providing & fixing in position 32 mm diameter PVC (approved quality) telescopic flush pipe complete cutting & making good the walls & floors including making all the connection but excluding the cost of fittings

Providing & fixing approved quality white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively

Providing & fixing in position 60 x 45 cm plain mirror superior glass of approved quality complete with 6 mm thick hard board ground fixing to wooden cleats with CP brass screws and washer complete

Providing & fixing in position 600 x 120 x 5 mm glass shelf with edges round of supported on anodised aluminium angle frames CP brass brackets and guard rails complete, fixed with 40 mm long screw, rawl plug etc. complete

Labour rate for repairing of high / low level automatic cistern by adjusting floating valves and other internal fittings as per the direction of EIC.

Providing & fixing in position 400 x 120 mm approved quality PVC shelf fix to wooden cleats with screws complete

Providing & fixing CP brass towel rail of size 600 x 20 mm complete with CP brass brackets fixed to wooden cleats with CP brass screws

Providing & fixing aluminum towel rail of size 600 x 20 mm complete with aluminium brackets fixed to wooden cleats with aluminium screws etc. complete

Providing & fixing white vitreous china wash basin along including making all connections but excluding the cost of fittings of following sizes (i) 550 x 400 mm

Providing & fixing white vitreous china wash basin along including making all connections but excluding the cost of fittings of following sizes (ii) 450 x 300 mm

Providing & fixing brass stop cock of 15 mm of approved quality

Providing & fixing MS/CI stop cock of 15 mm of approved quality (

Providing & fixing PVC stop cock of 15 mm of approved quality

Providing & fixing PVC stop cock of 20 mm of approved quality

Providing & fixing CP pillar tap of approved quality of 15 mm NB

Providing & fixing brass bib cock of approved quality of 15 mm nominal bore

Providing & fixing PVC bib cock of approved quality

Providing & fixing PVC waste of approved quality.

Dismantling GI pipes (External work) including excavation and refilling trenches after taking out the pipes manually / by mechanical means including stackibg of pipes within 50 metres lead as per direction of EIC :(a) From 15 mm to 40mm NB

Dismantling GI pipes (External work) including excavation and refilling trenches after taking out the pipes manually / by mechanical means including stackibg of pipes within 50 metres lead as per direction of EIC :(b) Above 40 mm NB

Repairs to GI lines including trenching, cutting the old pipes, taking out the same, rethreading & back filling etc. required for refixing the same: (a) GI pipes from 15 mm to 40 mm Nominal bore.

Minor repairing of Brass bib cock, stop cock & CP pillar tap as per instruction of EIC (NON AOR - Analysed item).

Providing & fixing GI pipes confirming to IS 1239 (Part-1) / 2004 complete with GI fittings including trenching and refilling etc. (External work):(a) 15 mm nominal bore

Providing & fixing GI pipes confirming to IS 1239 (Part-1) / 2004 complete with GI fittings including trenching and refilling etc. (External work):(b) 20 mm nomonal bore

Providing & fixing GI pipes confirming to IS 1239 (Part-1) / 2004 complete with GI fittings including trenching and refilling etc. (External work):(c) 25 mm nominal bore

Providing & fixing GI pipes confirming to IS 1239 (Part-1) / 2004 complete with GI fittings including trenching and refilling etc. (External work):(d) 40 mm nominal bore

Providing & fixing GI pipes confirming to IS 1239 (Part-1) / 2004 complete with GI fittings including trenching and refilling etc. (External work):(e) 50 mm nominal bore

Providing & fixing GI pipes confirming to IS 1239 (Part-1) / 2004 complete with GI fittings including trenching and refilling etc. (External work):(f) 80 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (external work) (a) 15 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (external work) (b) 20 mm nomonal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (external work) (c) 25 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (external work) (d) 40 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (external work) (e) 50 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (external work) (f) 75 mm nominal bore

Making connection GI distribution branch with main, by providing & fixing tees, nuts etc. including cutting and threading the pipes, testing etc. complet.(a) 25 mm to 40 mm Nominal Bore

Making connection GI distribution branch with main, by providing & fixing tees, nuts etc. including cutting and threading the pipes, testing etc. complet.(b) 50 mm to 80 mm Nominal Bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)(a) 25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)(b) 40 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)(c) 50 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)(d) 80 mm nominal bore

Providing and fixing CPVC valve of approved Standard : - 25mm NB

Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length - 15 mm nominal bore

Providing & fixing GI pipes complete with GI fittings and clamps, including cutting and making good the walls etc. (Internal work), exposed on wall(a) 15 mm nominal bore

Providing & fixing GI pipes complete with GI fittings and clamps, including cutting and making good the walls etc. (Internal work), exposed on wall(b) 20 mm nomonal bore

Providing & fixing GI pipes complete with GI fittings and clamps, including cutting and making good the walls etc. (Internal work), exposed on wall(c) 25 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall(a) 15 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall(b) 20 mm nomonal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall(c) 25 mm nominal bore

Providing & fixing GI union of approved quality in GI pipe including cutting and threading the pipe and making long screws (New work). (I) 15 mm nominal bore

Providing & fixing GI union of approved quality in GI pipe including cutting and threading the pipe and making long screws (New work). (ii) 20 mm nominal bore

Providing & fixing GI union of approved quality in GI pipe including cutting and threading the pipe and making long screws (New work). (iii) 25 mm nominal bore

Providing & fixing GI union of approved quality in GI pipe including cutting and threading the pipe and making long screws (New work). (iv) 40 mm nominal bore

Providing & fixing GI union of approved quality in GI pipe including cutting and threading the pipe and making long screws (New work). (v) 50 mm Nominal bore.

Providing & fixing GI union of approved quality in GI pipe including cutting and threading the pipe and making long screws (New work). (vi) 80 mm Nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required:(a) GI union socket - (I) 15 mm nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required:(a) GI union socket - (ii) 20 mm nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required:(a) GI union socket - (iii) 25 mm nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required:(a) GI union socket - (iv) 40 mm nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required:(a) GI union socket - (v) 50 mm Nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required:(a) GI union socket - (vi) 80 mm Nominal bore .

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required (b) GI plain socket (I) 15 mm nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required (b) GI plain socket(ii) 20 mm nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required (b) GI plain socket(iii) 25 mm nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required (b) GI plain socket(iv) 40 mm nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required (b) GI plain socket(v) 50 mm Nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required (b) GI plain socket(vi) 80 mm Nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required (c) GI elbow (I) 15 mm nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required (c) GI elbow(ii) 20 mm nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required (c) GI elbow(iii) 25 mm nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required (c) GI elbow(iv) 40 mm nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required (c) GI elbow(v) 50 mm Nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required (c) GI elbow(vi) 80 mm Nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required (d) GI reducing socket (I) 20 - 15 mm nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required (d) GI reducing socket(ii) 25 - 20 mm nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required (d) GI reducing socket(iii) 40 - 25 mm nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required (d) GI reducing socket(iv) 50 - 40 mm nominal bore

Providing & fixing the following fittings in existing GI pipe lines, cutting & threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete where ever required (d) GI reducing socket(v) 80 - 50 mm Nominal bore

Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C.pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) includingtesting of joints etc. complete 900 mm dia RCC pipes.

White washing with lime to give an even shade New work (three or more coats) :

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

White washing with lime on old work (one or more coat) to give an even shade

Colour washing such as green, blue or buff to give an even shade on old work (two or more coat)

Colour washing such as green, blue or buff on new work with base coat of white washing with lime (two or more coats) to give an even shade

Distempering (two or more coat) with oil bound washable distemper of approved brand & manufacture in all shades in new work over & including priming coat with cement primer

Distempering (one or more coat) with oil bound washable distemper of approved brand & manufacture in all shades in old work to give an even shade

Finishing walls with water proofing cement paint of required shade :Old work (one or more coats @ 2.20 kg/10 sqm) complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Applying priming coat with ready mixed pink or grey primer of approved brand & manufacture on hard & soft wood work

Applying priming coat with ready mixed red oxide Zinc chromate primer of approved brand & manufacture on steel galvanised iron / steel work

Painting with synthetic enamel paint of approved brand & manufacture in all shades to give an even & smooth shade including cleaning of surface :Old wood / steel works

Painting with synthetic enamel paint (two or more coats) of approved brand & manufacture in all shades to give an even shade - new wood / steel work

Wall painting (one or more coats on old work) with plastic emulsion paint of approved brand & manufacture to give an even shade

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Painting with oil type wood preservative of approved brand and manufacture on old work (one or more coats).

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work.

Labour rate for fixing BVFCL's issued universal hydraulic door closer with necessary accessories and screws or nuts & bolts etc.complete

Labour rate for fixing BVFCL's supplied non- hydraulic door closer / spring with necessary accessories and screws or nuts & bolts etc.complete

Providing & fixing in position 40 mm dia PVC pipe of approved quality (to be used as out lets of sink, wash basin & urinal pan etc.) as per direction of EIC.

Supply of oridinary portland cement confirming to IS- 269 / 1989 or IS-8112/1989 in 50 Kg. HDPE bags to Facotory area.

Enagament of Mechnical excavator ( Tyremounted) with bucket capacity of 0.30 CUM including the cost of fuel, lubricant, driver & helper.

Providing Hydraulic Dumper of capacity of 8.00 Cum per trip including the cost of fuel , lubricant, driver and helper Ect. Complete

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

16.15.2 Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately)

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Supplying and installing of 1.5 mm thick Polyfloor Vinyl Flooring

providing and fixing transparent sheet in roofing and in side cladding with galvanised iron J or L hooks , Bolts and nuts 8 mm / 6mm dia GI plain and bitumen washers complete excluding the cost of purlins rafters , trusses and other supporting structures (a) upto 60 degree pitch

Finishing walls with Asian paints (Apex) or equivalent exterior paint of required shade : New work (Two or more coat) and including priming coat of exterior primer : As per direction of EIC.

Finishing walls with Asian paints (Apex) or equivalent exterior paint of required shade : Old work : As per direction of EIC

Applying one coat of exterior weather coating wall primer (white) of approved brand like Asian paints and manufacture of required shade to give an even shade at all height including scaffolding and local transportation upto working site

BRAHMAPUTRA CONSTRUCTION

CHETIA INFRACON PRIVATE LIMITED