Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.7 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹35.0 L+₹82,073 (2.40%)Rejected-Finance | L2 | Rejected-Finance L2 | |
| 3 | L3₹35.2 L+₹1.1 L (3.12%)Rejected-Finance | L3 | Rejected-Finance L3 | |
| 4 | L4₹36.5 L+₹2.3 L (6.78%)Rejected-Finance 94 5TH FLOOR TOWER D SPENGLE HEIGHTS DHAKOLI KC ZIRAKPUR TEH DERABASSI SAS NAGAR MOHALI PB | S A S NAGAR | PUNJAB | 140103 | L4 | Rejected-Finance L4 | |
| 5 | L5₹36.9 L+₹2.7 L (7.95%)Rejected-Finance HOSUE NO 44 MASTER COLONY SATROD KHAS HISAR HARYANA 125044 | HISAR | HISAR | HARYANA | 125044 | L5 | Rejected-Finance L5 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
27 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
Garrison Engineer Chandimandir panchkula Haryana 134107
GE/CHM-67/2023-2024 ADDN /ALTN TO BLDG NO T-2690 AND P-507 OF AGE B/R II AT CHANDIMANDIR
2023_MES_625640_1
GE/CHM-67/2023-2024
Open Tender
Civil Works
Item Rate
180 days
Chandimandir
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
Garrison Engineer
₹98,000
Yes
15 Jan 2024
30 Oct 2023
30 Nov 2023
30 Oct 2023
27 Nov 2023
13 Nov 2023
Amount
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft and loose soil all as specified & directed by Engineer-in-Charge.
Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified.
Removal excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed.
Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.
75mm thick PCC 1:4:8 type D-2 (using 40m graded crushed stone aggregate) as in sub base flooring, finished even ,all as specified and directed.
Taking down cement plaster / terrazo of any description from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete, all as specified and directed.
15mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
Rendering 15mm thick in Cement and Sand mortar 1:4 over fair faces of brick / concrete ,finished even and smooth without using extra cement, inclunding using water proofing compound complete all as specified. Note : WPC shall be measured and paid separately.
Rendering 10mm thick in CM 1:3 on fair faces of concrete/brick surfaces as in ceilings , facia, chajja, etc finished fair and smooth, complete all as specified and directed.
Demolition of brick work, stone/ boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified & directed by Engineer-in-charge.
Brick work with sub class ‘B’ bricks old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed.
Brick work with sub class ‘B’ bricks old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed.
Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.
Dismantling floor hearth or wall tilling including cement mortar bedding, complete as specified and directed.
Glazed ceramic coloured tiles of size 300mmx450mmx 7mm thick as in dado, set and jointed in neat cement slurry and grouted in white cement complete as on vertical surfaces over and including 10 mm thick bedding layer in CM 1:4 complete all as specified and directed.
Glazed ceramic coloured tiles of size 600mmx1200mmx 10mm thick as in dado, set and jointed with adhesive complete as on vertical surfaces over and including 10 mm thick bedding layer in CM 1:4 complete all as specified and directed.
Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick bedding layer in CM 1:6, complete all as specified and directed.
Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick bedding layer in CM 1:6, complete all as specified and directed.
Coloured vitrified ceramic tiles, light shade, 8-10mm thick (square ) , area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
All as per serial item No 20 hereinbefore but on vertical surface over 10mm rendering in cement mortar (1:4).
Coloured vitrified ceramic tiles, light shade, 8-10mm thick (square ) , area of each tiles exc 0.42 sqm but n.exc 1 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.
All as per serial item No 22 hereinbefore but on vertical surface over 10mm rendering in cement mortar (1:4).
Marble work (table rubbed and polished) for wall lining (veneering to wall) 25mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.
Powder coated aluminum sections as in frames/ shutter of doors/window/ventilators /partitions, (Sliding / openable) including joinging cleats, glazing clips, rubber neoprene beading, powder coated aluminim snap beading, screws etc. complete all as specified and directed Note : (i) Minimum thickness of power coating shall not be less than 50 micron. (ii) Weight of aluminum section only shall be measuerd and paid. (iii) Aluminum doors/windows /ventilators to be fixed to jambs with chromium plated screws . (iv) The rate shall be inclusive of neoprene beadings, snap beading, screws etc and in case of sliding shutters locking arrangement and rollers in sliding shutters. Weight of fitting fixtures will not be measured for arriving the weight of aluminum section. (v) Glass /wooden panel/ACP sheet shall be measured and paid separately under respective items. (vi) Design as directed by Engineer in charge.
Supply only 5.5mm thick tinted sheet glass, fixed to aluminum frame work with and including standard anodized aluminum bead, rubber packing, aluminum screws etc, in panels exc 0.5 Square metre in each pane, complete all as specified & directed.
Supply only 3mm thick aluminium composite panel sheet (ACP) colour as approved by Engr In Charge all as specified and directed.
18mm to 20mm thick granite stone slabs, width and length as ordered, best quality machine cut and granite polished to be fixed on kitchen platform, jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing, over and including screed bed 15mm thick in cement mortar 1:6 and rounding off/bull nosing exposed edges and making holes for gas pipes etc including demolition of old stone slabs complete all as specified and directed.
50mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight all as specified & directed by Engineer-in-charge.
Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.
Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each, and removal from site complete all as specified & directed.
Taking down shutters of any description exceeding 1Sqm but not exceeding 2sqm each including stacking at location as directed by Engineer-in-Charge for refixing in same opening(s) after rescuring or easing, adusting, welding, etc., complete all as specified and directed.
Flush shutters 35mm thick factory made solid core construction with block board core and ply wood face panels, commercials type on both sides,including a shop coat of pink primer, complete all as specified & directed.
Glazed and gauged skelton shutter, 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (with sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.
Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.
Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing on Page No. 160 of SSR-2010 (Part II) all as directed by Engineer-in-Charge.
Solid PVC frame having profile 105mm x 60mm , single rebate, made out of solid PVC foam with homogenous fine cellular structure having density 750, smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing mentioned on Srl Page No. 134, 135 and 146 of SSR Part-II including aluminum iron mongery. MAKE : M/S RAJSHREE PLASTIC WOOD, INDORE/SINTEX
18mm thick solid PVC shutter made out of 18mm celuka printed and UV coated sheet cut according to the size of the cabinet or for kitchen drawer provided and the groove to be made on the one edge so that the overlapping could be done for double leaf shutter including fixing with 1.25" Mild steel screw to the frame with the channel in and including hinge. Handles . complete the work according directions of Engineer-in-Charge, complete all as specified and directed.
100 mm size butt hinges medium weight cold rolled mild steel complete, all as specified and directed.
Butt hinges 100mm long, of extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, all as specified and directed.
200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and directed.
150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and directed.
Extruded aluminium alloy handles, cast type, 125mm long , all as specified.
Extruded aluminium alloy handles, cast type, 150mm long , all as specified.
300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed.
300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, fixed as in repair complete all as specified and directed.
Solid PVC board 16-18mm thick, interior grade white colour, fixed with screws as in kitchen cupboard, shutter, shelf, wrap free , impact resistant, fire resistant and smell free including taking out old board complete, all as specified and directed.
Auto close stainless steel (clip hinges) 75mm size suitable for cupboard shutter fixed in position with stainless steel screws, fixed as in repairs complete all as specified & directed.
PVC body magnetic shutter catcher for kitchen cup boards, fixed with standard steel screws, complete all as specified and directed.
Aluminium (extruded section body) door closer hydraulically regulated designation No. 3, universal type, suitable for door shutter of 851 mm to 1000mm in width and of weight between 61 to 80 Kg complete all as specified & directed by Engineer-in-charge.
Hacking out old broken glasses of any description from metal frames including punching or drilling out old glazing pins/springs clips and fixing new ones, complete all as specified and directed.
Sheet glass 3mm thick, ordinary quality and glazing with oil putty in square, area exc 0.5 sq. mtr in each pane,complete all as specified and directed.
3mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in squareexc 0.5 Sqm in each panes complete all as specified and directed.
Stainlesssteel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18 mm in fixed with tinned tacks, fixed as in repair complete all as specified and directed.
Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, all as directed.
Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, all as specified and directed.
Supply and fixing mild steel framed work as in doors or gates of angles or other sections with gusset plates complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with including hooks and hinges (excluding of covering steel sheeting) fastening, locking arrangement, etc conforming to Fe-410-O or Fe-310-O all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of cement base paint including all necessary wetting and curing, complete all as specified and directed.
Three coats of white wash on wall surfaces including preparation of new plastered surfaces complete all as specified and directed
Three coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and directed
Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and directed.
Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of red oxide, zinc chrome complete all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer, over and including 2mm thick (average) wall care putty and sand papering, complete all as specified & directed by Engineer-in-charge.
Preparation of old decorated plastered surfaces of walls and applying two coat of white wash complete all as specified.
Preparation of old decorated plastered surfaces of ceiling and applying two coat of white wash complete all as specified.
Preparation of old plastered surfaces of walls and applying Two coats of cement base paint, complete all as specified and directed.
Two coats of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth , including preparation of old surfaces , complete all as specified & directed.
Two coats of synthetic enameled paint on old wooden surfaces of any description ,including preparation of old surfaces , complete all as specified & directed.
Preparation of newly plastered surfaces of walls and applying wall care putty (average thickness 2mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering, making the surfaces even and smooth and applying two coats of exterior emulsion over one coat of exterior wall primer complete all as specified and directed.
Preparation of newly plastered surfaces of walls and applying wall care putty (average thickness 2mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering, making the surfaces even and smooth and applying two coats of interior emulsion over one coat of interior wall primer complete all as specified and directed.
Wash down water closet pan, Pedestal pattern, on piece composite water closet, starwhite colour with ‘P’ or ‘S’ trap, including flushing cistern with lid, fitting seat cover, complete set, fixed as in repaircomplete all as specified and directed.
Vitreous china, wash down water closet pan, superior white, Pedestal pattern WC with ‘P’ or ‘S’ trap, seat cover (excluding, flushing cistern and flush pipe), complete all as specified and directed.
Vitreous China half stall urinal, fixed against wall in cement mortar (1:2), securing urinal with and including 60mm long brass screws, pointing around urinal back in cement, including CP waste coupling, 32mm PVC waste pipe, complete all as specified and directed.
Corner glass shelf Chromium plated with brackets, fixed as in repair complete all as specified and directed.
Glass shelf of size 500 x 125mm Chromium plated fixed with chromium plated steel screws and plastic cleats, fixed as in repair complete all as specified and directed.
Demolition of reinforced cement concrete in roofs, floors, beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed.
Demolition of stone slabs of any description in floors laid, bedded and pointed in any mortar complete all as specified and directed
Reinforced cement concrete type B-1, 1:2:4 (nominal mix, using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams etc, shelves and the like complete all as specified and directed Note : Reinforcement and form work shall be measured and paid separately
Form work to flat surfaces of suspended slabs such as roof slab, floor slab, landing, shelves etc, including edges in any position, rough finished surfaces, complete all as specified and directed.
Mild steel TMT bars 10mm dia and over ,cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
Mild steel TMT bars 6mm to 8mm dia and over ,cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.
Wall mixer 3-in-1 with provision of bath hand shower and over head shower complee 115mm long bend pipe connecting leg and wall flange cast copper alloy, fancy type, chroumium plated suitable for 15mm bore GI bore pipe fixed as in repair complete all as specified and directed.
Stop valve chromium plated, cast copper alloy, fancy type, , screwed down high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Stop valve chromium plated, cast copper alloy, fancy type, , screwed down high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.
Stop valve, cast copper alloy, screwed down high pressure, screwed both and for iron pipe or for union, suitable for 20mm bore pipe,complete all as specified and directed.
Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.
Bib taps brass, with wall flange, chromium plated, cast copper alloy fancy type, short body, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs, complete all as specified and directed.
Bib taps brass, with wall flange, chromium plated, cast copper alloy fancy type, short body, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, complete all as specified and directed.
Stop valve (concealed type), cast copper clloychromium plated, fancy type, screwed down, high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.
Chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repairs, complete all as specified and directed
Chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, complete all as specified and directed
Plate rack made out of 1.00mm stainless steel sheet of size 610mmx 750mm with steel shelves and hanging arrangements for utensil, complete all as specified and directed.
Sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and wastes, overall size 915 x 460mm, bowl size 410x330x160mm incl fixing cantilever brackets and connection to union, pipe, complete all as specified and directed.
Sink mixer with swinging spout (wall mounted model), cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.
PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection with PTMT nuts and 32mm dia PVC long bend for squat pattern WC , set with concrete and making good to floor, fixed as in repair complete all as specified & directed.
32mm dia, 800 mm long PVC waste pipe for wash basin, sink , urinal etc fixed as in repair complete all as specified & directed by Engineer-in-charge.
Urinal spreader, of PTMT (Minimum weight 60gms) white , suitable for 15mm bore pipe, complete all as specified and directed.
Demolition and breaking up 110/75mm boredrain pipe (Salt glazed ware, AC or Reinforced concrete) set incement mortar complete all as specified and directed.
PVC (SWR) pipe, type 'B' 110mm bore, single socketed in any length with rubber ring joints, laid in trenches, complete all as specified and directed.
PVC (SWR) pipe, type 'B' 75mm bore, single socketed in any length with rubber ring joints, laid in trenches complete all as specified and directed.
PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed
PVC (SWR) rain water pipe, 75mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, complete all as specified and directed
110mm bore PVC (SWR) bend any radius , complete all as specified and directed
75mm bore PVC (SWR) bend any radius , complete all as specified and directed
PVC (SWR) floor trap 100mm bore, plain with grating incl jointing with solvent cement, complete all as specified and directed.
PVC (SWR) floor trap 75mm bore, plain with grating incl jointing with solvent cement, complete all as specified and directed.
PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement,complete all as specified and directed.
500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.
1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm PTMT, all as specified in SSR Part-I and all as directed by Engineer-in-charge.
Wash hand basin, vitreous china, flat back , white , of size 550X400mm, including, CP pillar tap, CP waste coupling, angle brackets and PVC waste pipe, fixed as in repair, complete all as specified and directed.
Wash hand basin, vitreous china, table top, white , of size 560X410mm, including, CP pillar tap, CP waste coupling, angle brackets and PVC waste pipe, complete all as specified and directed.
Taking up or down steel tubing and connections 15mm bore, complete all as specified and directed.
Taking up or down steel tubing and connections 20mm bore ,complete all as specified and directed.
15 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors ,complete all as specified and directed.
Refixing old steel tubing of 15 mm bore and connections in new or old position (walls, ceilings, floors etc.) including cleaning ,complete all as specified and directed.
20 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.
Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) including cleaning, complete all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc and cutting chases for concealed water tubing & making good, cutting not exc 10 cm girth, in brick walls complete all as specified and directed.
Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar etc , removing any type of existing treatment ,complete all as specified and directed.
PCC 1:2:4 type B-0 (using 12.5m graded crushed stone aggregate) , as in padding over roof, mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. NOTE : (water proofing compound to be measured and paid separately)
Rendering 15mm thick (average thickness) plaster in cement mortar 1:4 mixed with WPC on concrete roof surfaces including flashings and junction of parapets etc , finishing the surface even and fair without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).
3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions including dismantling of existing felt /treatment, complete all as specified & directed.
Supply only Integral waterproofing compound, all as specified.
20mm dia stainless steel curtain rod including fixing fancy types brackets, stops, rollers etc, fixed as in repair complete all as specified and directed.
Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, including dismantling of old sheets complete all as specified and directed.
Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws aincluding dismantling of old sheets complete all as specified and directed.
Standard GI snap grid of size 605mm x 605mm frame work for false ceiling with main tee 32 x 24 x 1mm thick cross tee 26 x 24x 4mm thick and wall angle 24 x 24x 1mm thick having flange powder coating and covered with PVC thin sheet same to placed in grid by means of ceiling and grid to be tied properly / suitabely by GI strip / GI wire in truss / ridge / purlin complete all as specified and directed.
Perforated particleboard/ tiles for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or withstaples on snap gridSupply only prelaminated particle board 7mm thick of size 600 x 600mm, interior grade, preliaminated one side with decorative choice lamination and other side balancing white liamination, fixed with staples as in snap grid complete all as specified and directed.
Rolled mild steel work as in roof trusses (framed) trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc , Gde-Fe-410-S, complete all as specified & directed.
Taking down carefully aluminum/copper point wiring on & including hard wood battens, surface conduit and board/blocks etc or through conduits for light , socket or power point ,fan point complete incl fitting such as switches ,sockets, ceiling rose , holder socket, light fitting, regulators and making good disturbed surfaces of wall, floor , ceiling etc and removing materials (other than those for which credit has been given by the contractor) to the MES stores yard for keeping in safe custody complete all as specified and directed.
Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new modular sunken box and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface flush with wall , comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed.
All as per serial item 136 herein before but for socket outlet 3 pin 5 Amps on same board complete all as specified and directed
All as per serial item 136 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed
All as per serial item 136 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor
Point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new steel sunken boxes 1.2mm thickness covered with provision of 3mm thick plastic laminated sheet, comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed.
All as per serial item 140 herein before but for socket outlet 3 pin 6Amps on same board complete all as specified and directed
All as per serial item 140 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed
All as per serial item 140 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor
Switch modular type (ISI marked), single pole, one way 6 Amps, one module (ISI marked), complete all as specified & directed.
Switch modular type (ISI marked), single pole, one way 16 Amps, one module (ISI marked), complete all as specified & directed.
Socket shutters outlet 2/3 pin 6 Amp modular type multi purpose combined two module (ISI marked), complete all as specified & directed.
Socket shutters outlet 2 in 1 pin 6/16 Amp modular type multi purpose combined 2 module (ISI marked), complete all as specified & directed.
Switch piano, flush type, 6 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge
Switch piano, flush type, 16 Amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge
Sockets outlet multipurpose 2 in 1 pin, 6 and 6 Amps flush type ISI marked all as specified and directed by Engineer-in-charge
Sockets outlet multipurpose 2 in 1 pin, 6 and 16 Amps flush type ISI marked all as specified and directed by Engineer-in-charge
Ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.
LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size fixed as in repair complete all as specified and directed.
Slim LED lights fitting, 4 feet, 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose fixed as in repair complete all as specified and directed.
Disconnecting the power supply and taking down carefully by unscrewing from boards fittings and fixtures such as DBs, Junction Box, Panels of any size complete with all MCCB's ,MCB's etc and removing from site, Complete all as specified and directed .
MCB DB, IP 43 protection, powder coated double door with locking arrangement suitable for surface and flush mounting, 08 way SPN with 200 Amps busbar 240V completed all as specified and directed.
MCB DB, IP 43 protection, powder coated double door with locking arrangement suitable for surface and flush mounting, 02 way SPN with 200 Amps busbar 240V completed all as specified and directed.
MCB, SPN , 240 volt, 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed
MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed
LED panel surface mounted -2'x2' - 36 watts cool day light fitting with heat exchanger unit, LED driver, surge protection complete including cutting hole of required size in POP/false ceiling making good disturbed including taking down any type ceiling fitting complete all as specified and directed.
LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, including thermal management in multiple optics complete with IP 66 protection , as in repair complete all as specified and directed.
GI bracket made of GI pipe Medium Grade of size 40mm dia 1.5 mtr length bend to shape of 120 degre fixed o pole/wall with clamp of size 50x6 of suitable length fixed with nuts/ bolts and 1.5 mtere long 1.5 sqmm 2 core flexible wire from connector / ceiling rose to light fitting fixed as in repair complete all as specified and directed.
Exhaust fan, steel body AC single Phase. 230V of size 300m sweep, heavy duty with, blades, and frame and louvers, complete all as specified and directed.
Cutting openings, through brick walls in round shape , for 300mm dia exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required including finishing and matching the disturbed surface and removing surplus unserviceable bricks, hard-core, etc. from site and rubbish complete all as specified & directed.
Dhingra Brothers
Gunjan and Gunjan Associates
Satyadev Builders
m/s AR Construction co
PARVEEN KUMAR AND SONS
IMPERIAL ENGINEERS
KUNDRA CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .