Supply Installation, Testing Commissioning of Firefighting System Fire Detection Alarm System with allied Civil Electrical Works at SKIMS (Mechanical component only)

Amount

Main Electric fire Pump Supplying, Installation, Testing and Commissioning of electric driven main fire pump suitable for automatic operation and consisting of following: complete in all respect as required.(a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest outlet at specified flow of 2280LPM at 120 m. head conforming to IS 1520. (b) Suitable HP Sq . cage induction motor, TEFC, synchronous. speed 1500 RPM, suitable for operation on 415 volts +/- 10%, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti-vibration pads.

Diesel Engine Driven Pump Supplying, Installation, Testing and Commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following: complete in all respect as required. (a) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest outlet at specified flow of 2280LPM at 120 m. head conforming to IS 1520. (b) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, 12 volts/24 Volts electric starting equipment, Diesel Tank, exhaust pipe extended upto 1 m. outside pump house duly insulated with 50 mm. thick glass wool with 1.0 mm. thick aluminum sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc.as required. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti-vibration pads

Jockey Pump: Supply, Installation, Testing and commissioning Electric driven pressurization pump (Jockey Pump) suitable for automatic operation and consisting of following complete in all respects as required: (a) Horizontal type multi stage centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP squirrel cage induction motor TEFC, synchronous speed, 1500 rpm suitable for operation on 415 V, 03 phase, 50 hz AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class F insulation conforming to IS 325 with energy efficiency of IE-3. (c) MS fabricated common base plate coupling, coupling guard, foundation bolts, etc as required. (d) Suitable cement concrete foundation duly plastered with anti-vibration pads. (e) The head of the pump is 120 mtr to ensure a minimum pressure of 3.5 kg/sq.cm. at highest and farthest outlet at specified flow of 2280LPM

Drainage Pump Supplying, Installation, Testing and Commissioning of Monoblock type self-priming 1 HP Single phase drainage pump complete with base plate and all accessories suitable for operation on 230 V, single phase AC supply complete with starter for automatic operation including water level sensing device, inter connection with submersible cable etc. as required.

Air Vessel Supplying and fixing air vessel dish ended made of 250mm dia, 8 mm thick MS sheet,1200 mm. in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.

Air Cushion Tank Supplying and fixing air vessel made of 450mm dia, 12 mm thick MS sheet,1800 mm. in height with air release valve on top and flanged connection to header, drain arrangement with 25 mm dia Gun metal wheel valve, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.

Water Level Indicator Providing and fitting of 25 mm diameter gun metal fitting for water level indicator gauge with isolation valve at top and bottom, heavy gauge transparent polyethylene tube of approx. 5 m length with colour indicator float clamped to teak board 100 mm wide x20 mm with graduation in KL as required.

Liquid level controller Providing and fixing liquid level controller for fire pumps to cut off in case low level of water in tank including cables, panel , etc. and making necessary connection to panel and commissioning thereof as required.

Pressure gauge Providing & fitting of Dial type pressure gauge with isolation cock and connecting piping, bleed & block valve of dial diameter 150 mm calibrations 0- 20 kgf/ sq.cm.as required.

Pressure switches Supply ,Installation, Testing and Commissioning of Pressure switches suitable for operating with fire hydrant systems for working pressure of 0-20 Kg/cm² including electrical control wiring with suitable copper conductor PVC insulated and sheathed control cable up to control panel, connections etc. complete as required.

Flow switch Providing & fixing of flow switches on following sizes M.S. pipes including connection etc as required.

100mm diameter

150mm diameter

M.S "C" Class Pipes (Above Ground) Providing, laying, testing & commissioning of/ 'C' class heavy duty MS Pipe conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.

25 mm diameter

32 mm diameter

40 mm diameter

65 mm diameter

80 mm diameter

100 mm diameter

150 mm diameter

200 mm diameter

250 mm diameter

Main Ring/Pipe(Under Ground) Providing, laying, testing & commissioning of/ 'C' class heavy duty MS Pipe conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc., fixing the pipe on the wall/ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.

Puddle Flange: Supply & fitting of M.S. Puddle flange in the wall of underground storage tank by way of drilling a hole of requisite size inside the wall, fitting the flange so that it extends to at least 200mm on both sides. The job includes filling in & concreting of the gaps, complete waterproofing of the installation ,leakage 7 seepage test of the same.

G.I Pipes Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.

25 mm diameter

32 mm diameter

40 mm diameter

50 mm diameter

65 mm diameter

80 mm diameter

100 mm diameter

150 mm diameter

Non return valves Providing, installation, testing and commissioning of dual plate non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required.

40 mm diameter

50 mm diameter

65 mm diameter

80 mm diameter

100 mm diameter

150 mm diameter

200 mm diameter

Butterfly valves Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze/Gunmetal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS 13095, of following sizes as required.

40 mm diameter lever operated

50 mm diameter lever operated

65 mm diameter lever operated

80 mm diameter lever operated

100 mm diameter lever operated

150 mm diameter lever operated

200 mm diameter lever operated

250 mm diameter lever operated

Double flanged sluice valve Supplying and fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non-rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets, conforming to IS 780 of following sizes as required.

80mm diameter

100 mm diameter

150 mm diameter

200 mm diameter

250 mm diameter

Masonry chamber support Constructing masonry chamber 120x120x150 cms inside with 75 class designation brick work in cement mortar 1 : 5 (1 cement : 5 coarse sand) for sluice valve with MS 60 x 60 cm manhole and RCC top slab 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including steel reinforcement including excavation and PCC concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand and 4 graded stone aggregate 40 mm nominal size) pedestals for supporting the pipe and sluice valve concrete and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as required.

Y-strainer Providing, installation, testing and commissioning of stainless steel strainer fabricated out of 1.6 mm. thick stainless steel sheet with 3 mm.dia holes with stainless steel flange.

80mm diameter

100mm diameter

150 mm diameter

200 mm diameter

250 mm diameter

Vibration elimination connection Supply ,Installation, Testing and Commissioning of Resilient rubber neoprene lined single vibration elimination connection with unit control suitable for raw water up to 45 ° C temperature working pressure 20 Kg/cm2 as required.

80 mm diameter

100mm diameter

150 mm diameter

200 mm diameter

250 mm diameter

Auto Air Release Valve: Providing & fixing of Air release valves of following sizes along with ball valves as required

25mm diameter

32 mm diameter

Internal hydrant Valve Supplying and fixing single headed internal hydrant valve with instantaneous Gun metal couplings of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal cap and chain as required

Yard hydrant Valve Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gun metal coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal cap and chain as required.

Gun metal short branch pipe Supplying & fixing 63 mm dia Gun metal branch pipe with 20 mm (nominal internal diameter) size Gun Metal nozzle conforming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.

Orifice plate Supplying and fixing orifice plate made of 6 mm. thick stainless steel with orifice of required size in between flange & landing valve of external and internal hydrant to reduce pressure to working pressure of 3.5 kg/cm2 complete as per specifications as required.

First-Aid Fire Hose Reel Supplying and fixing First-Aid Hose Reel with MS /' construction spray painted in Post office Red, "'/ conforming to IS 884 with upto date amendments, complete with the following as required. (a) 36m long 20 mm (nominal internal) dia water hose Thermoplastic (Textile reinforced) Type -2 as per IS: 12585 (b) 20 mm (nominal internal) dia gun metal globe valve & nozzle. (c) Drum and brackets for fixing the equipment on wall. (d) Connections from riser with 40 mm dia stop valve (gun metal) & M.S. Pipe

Non-percolating flexible hose (RRL type-'A') Supplying and fixing 63 mm dia, 15 mtr. long , RRL hose pipe with 63 mm dia Male and Female 'J Gun metal couplings duly binded with GI wire, . rivets etc. conforming to IS 636 (type-A) as required.

Controlled Percolating (CP) Hose Controlled Percolating (CP) Hose ISI marked (IS: 8423) 63 mm diameter x 15 M long complete with instantaneous type gunmetal 63 mm diameter IS marked Male and female couplings (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 mm copper wire.. (OUTSIDE)

Weather proof hose cabinets(Outside) Supplying and fixing of hose cabinet of size 900 mm x 600 mm x 500 mm made of 2 mm thick MS sheet with 6 mm thick glazed glass doors including necessary locking arrangement suitable to accommodate external hydrant with butterfly valve, 2 Nos. 15 mtr. long Hose pipe, 1No. branch pipe, mounted on wall OR raised brick platform & duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant, as required.

Sprinklers: Providing Fixing Testing and Commissioning of 15 mm dia Quartzoid bulb type sprinklers of Rating 68 degree centigrade with required accessories

Pendent Sprinkler

Upright Sprinkler

Horizontal Side wall Sprinkler

Concealed Sprinkler

Sprinkler flexible pipe (UL Listed) supplying, installation, testing and commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 mm NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (outlet) 15mm NPT female thread with reducer, Nipple, 2side brackets, centre bracket, stock bar of follwoing size complete as required.

Water curtain Providing, installation, testing and commissoningof water curtain nozzle 15mm diameter nickel chrome plated brass, BSPT, K-factor as per design consideration complete as required.

Fireman's axe Standard fireman's axe with heavy rubber handle

M.S. cabinet(Inside) M.S. cabinet door fabricated from 16 g M.S. sheet with full glass and locking arrangement, suitable to enclose the firefighting enclosure/space accommodating 1 Hydrant landing valve, 1 fire hose reel, 2 nos.15m long 63mmdia hose,1-branch pipe.. The door shall be painted with one coat of primer and finished stove enamelled "Fire Red", "Fire Hose" written on front.(Approx. size 1.2 m x 2.1 m).(Inside Hydrants)

Gun-metal 2-way fire brigade Providing and fitting of Gun-metal 2-way fire brigade inlet connection consisting of. 63mm diameter instantaneous type male coupling with built in check valves and 100mm diameter flanged outlet complete with bolts, nuts and rubber insertions as per I.S:904 (To be connected to external ring main/wet riser)

Gun-metal 3-way fire brigade Supplying and fixing 3 Way FBC of CI body~ with 3 No. Gun Metal male instantaneous inlet couplings complete with cap and chain as required. For 150mm dia M.S.Pipe connection conforming to IS : 904 as required

Gun-metal 4-way fire brigade Supplying and fixing 4 way fire brigade connection of cast iron body with 4 Nos. Gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for 150mm dia MS pipe connection, conforming to IS 904 as required.

M.S. cabinet M.S. cabinet door fabricated from M.S. Sheet duly painted with front glass door and locking arrangement, suitable to enclose the fire service connection i.e. 2 way/3 way fire brigade valves.

Structural Steel Structural Steel like angles, channels etc at various locations for supporting Tanks, Valves etc

Pressure reducing valves for sprinkler system at SCI

Remote Indication panel Fabrication, Supplying, Installation, Testing & Commissioning of remote indication panel consisting of status indication of various electric pumps, system pressure indication, water level indication of sump etc.

Cabling Supply, laying & testing of armoured 300 Sqmm, 3.5 core, XLPE insulated PVC Sheathed aluminium conductor of 1.1 kv grade on surfaces/in existing cable tray suitably clamped as required

Supply, laying & testing of FR PVC insulated, 1.1kv, armoured, 3.5 Core, Cu Conductor of following sizes on surfaces/in existing cable tray suitably clamped termination with copper lugs at both ends as required as required

Supply laying & testing of FR PVC insulated, 1.1kv, single Core, Cu Conductor of following sizes on surfaces/in existing cable tray suitably clamped , termination with copper lugs at both ends as required as required

End termination: Supplying and making end termination with brass compression gland and aluminium lugs for following sizes of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Multicore Control Wiring Supplying and laying control wiring with multicore copper stranded conductors of following sizes PVC insulated PVC Sheathed armoured underground cables between various sensors and system controller/starter etc in Pump House and outside on surface /existing cable trays complete with connection at both end with glands etc required .

Cable trays Fabrication and Installation of 300 mm width X 50 mm depth X 1.6 mm thick perforated MS cable tray including horizontal and vertical bends, reducers, tees, cross members and other accessories as required duly suspended from the ceiling with MS Suspenders and including painting with post office red synthetic paint as required

Earthing Providing, fitting & testing of standard earthing for electrical panels, servo stabilizer, pumps, exposed conductors, other electrical items located inside/outside firefighting pump house complete as per Indian Electricity Act & latest IS Standards.

Electric Over Head Travelling Crane Providing and fixing of 3.0 Ton Single Girder EOT Crane with wire rope hoist ,Floor Operated with Radio Remote and Pendent Push Button Station as per latest IS standards

Exhaust Fan Providing & fitting of heavy duty industrial exhaust fans as required

Cost On Account of operation/ watch & ward under three shift system round the clock without break/holiday after successful commissioning of the system.

EVOLUTION TECH AND INFRA PVT LTD

J.K.DEFENCE FIRE ENGG. SERVICES

VOID FIRE CONSULTANTS

Lyra Engineering Services

Royale Meridian (India) Private Limited