PROVN OF GUARD ROOM, TOILET BLOCK, BATHROOM, URINAL POT AND SEWAGE LINE ETC AT 512, LT AD MSL REGT AND 110 MED REGT AT DELHI CANTT UNDER GE (EAST) DELHI CANTT-10

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundations etc or for shafts, wells cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed by Engr-in- Charge.

Returning & filling including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removal of excavated material n.exc 50 mtr and depositing where directed at level not exc 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engr-in-Charge.

M & L for RCC M-25 design mix as in foundation, including rafts , footings , foundation beams, plinth beams; bases for columns, etc ; basement slabs, under- reamed piles and mass concrete complete all as specified and directed by Engr-in-Charge.

M & L for RCC M-25 design mix as in columns, pillars, piers, posts and struts etc complete all as specified and directed by Engr-in-Charge.

M & L for RCC M-25 design mix as in Beams , cantilevers, bressummers, lintels over 1.5 m span etc complete all as specified and directed by Engr-in-Charge.

M & L for RCC M-25 design mix as in slabs supported on walls, beams and columns in floors , roofs, landings , balconies, canopies, deck slabs and shelves etc complete all as specified and directed by Engr-in-Charge.

M & L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips etc complete all as specified and directed by Engr-in-Charge.

M&L for mild steel TMT bars 6 mm to 8 mm dia and over, cut to length, bent to shape required including cranking bending spirally & binding with and including mild steel wire (annealed) not less than 0.9mm dia etc complete all as specified and directed by Engr-in-Charge.

M&L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in strirrups, spaces and binder and including mild steel wire (annealed) not less than 0.9mm dia etc complete all as specified and directed by Engr-in-Charge.

M & L for form work to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams: and similar works; vertical or to batter for flat rough finished surfaces complete all as specified and directed by Engr-in-Charge.

M & L for form work to sides and soffits of suspended slabs such as roof slabs , landings and similar work not exc 200 mm thick (horizontal or sloopping) for flat rough finished surfaces complete all as specified and directed by Engr -in Charge.

M & L for form work to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams etc for flat rough finished surfaces complete all as specified and directed by Engr -in Charge.

M & L for form work to sides of pillars, posts, struts, piers, columns and stanchions size of square, rectangular or polygonal for flat rough finished surfaces complete all as specified and directed.

M & L for form work to edges of concrete flats, treads breaks in floors , window cills , concrete railling, opening in concrete walls, floors and roofs RCC/PCC bands floors roofs n exc 20 cm wide and sides of RCC/PCC bands in walls , horizontal or slooping and similar work exc 10 cm and not exc 20 cm wide surface finished rough complete all as specified and directed.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4, in half brick thick complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and fair complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and fair complete all as specified and directed by Engr-in-Charge.

M & L Rendering 5 mm thick on fair faces of concrete or concrete surface in ceiling in CM 1:3, finished even and fair complete all as specified and directed by Engr -in Charge.

M&L Earth Soil spreading , levelling in layers n.exc 25 cm thick each layer with well ramming including watering as required under the floor complete all as specified and directed by Engr -in Charge. (Note :- Earth Soil available surplus soil from the excavation at ground )

M&L75 mm thick cement concrete type C-2 1:3:6 (40mm graded aggregate) as in sub base complete all as specified and directed.

M & L 25 mm Thick PCC type B-0 1:2:4 (12.5mm graded aggregate) as in flooring, under Tiles and etc all as specified and directed

M&L Vitrified coloured ceramic tiles 10mm thick (square/rectangular) polished, area of tiles exc 0.42 sqm but n exc 1.00 sqm each in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

All as per item No. 25 here-in-before but vertical surface as in dado, skirting etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM 1:4

M & L Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over 15 mm thick avg screed bed in CM 1:6 complete all as specified and dirtected by Engr-in-Charge .

M & L Coloured Glazed ceramic tiles in vertical surface 600 x 300 x 7-8 mm thick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over & including 10 mm thick plaster in CM 1:4 complete all as specified and directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 112 x 52 mm & sash 42 x 86 mm both having wall thickness of 2.3+ 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 6.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.20 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frameto finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) (Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.)

S&F mild steel box type ventilator fixed type with galzing bar without wire mesh & glass, primer coated (without guard bar / gril).

S&F frame work such as grill/guard bars 12mm square bars grating etc with ends of bars shouldered, and / or riveted to Fe 410 and Fe 310-0 of mild steel round or square bars.

S&F stainless steel wire cloth 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed.

S & F 3 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S & F 5 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 1 Sqm in each pane fixed complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window double rebare Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type fly proof wire mess door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges, necessary S.S screws ad wire mess shall be paid separately)

S & F Solid PVC door frame of size 50mm x 95mm made out of wood grain printed PVC sheet used reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F of factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam coloured PVC Sheet on both face, supplying & fixing in frame at site as per secification & directed

S & F stainless steel Butt Hinges of size 100 mm with ss screw complete all as specified and directed

S & F150 mm size aluminium handles cast type anodised complete all as specified and directed

S & F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F in 250 mm long aluminium alloy, anodised siding door bolts, with has[, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiums alloy and fixed

Material and labour for preparation of new brick/concrete plastered or unplastered surfaces of walls, pillars, cornices by brooming down etc and applying two coat of cement base paint over a coat of cement primer etc complete all as specified and directed by Engr -in Charge.

M & L for 2mm thick wall care putty on new surface of wall/ ceiling including sand papering thus making surface even & smooth , complete all as specified and directed ( Make : Birla white / JK white wall care putty and as per make of list of CA)

M & L for preparation of new surface brick/concrete/ plastered or unplastered surfaces of walls, pillars, cornices by brooming down etc and applying two coats of Oil Bound Distemper over a coat of interior primer using roller brush complete all as specified and directed.

All as per Srl Item No 46 here-in-before but on celling surafce

M&L two coat of synthetic enamel paint (finishing coat) over one coat of red oxide primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

M&L for hard core of gauge n.exc 63mm deposited, spread and leveled in layers n.exc 15cm thick watered and rammed to a true surface with broken stone aggregate complete all as specified and directed by Engr -in Charge..

M & L 75 mm thick Cement concrete work as in plinth protection type C1 , 1:3:6 (20mm graded aggregates) with finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engr -in Charge.

S & F Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap with connection to drain and to flushing pipe antisyphonage pipe, including sheet cover and making good to floor complete all as specified and directed.

S&F 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket ,32mm bore PVC flush pipe complete all as specified and directed

S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.

S&F of CP towel rail 600mm long fixed with and including chromium plated brass screws and and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified.

S&F Vitreous China wash basin oval counter type white, size 600x425x195mm, with all fitting and fixture including fixing in granite slab, brass waste coupling, 32mm brass CP bottle trap and PVC waste pipe complete all as specified and dirtected by Engr-in-Charge .

S&F steel water tubing galvanised 15mm bore medium grade fixed to walls, under floors and on ceiling surfaces including all fittings complete all as specified and directed.

All as per srl item No.56 here-in-before but 20mm bore.

S & F rotational moulded polythene, water storage tank 1000Ltrs capacity, closed top, cylindrical, hoisted and fixed in position including 20 mm float ball brass valves high pressure with epoxy coated, aluminium rod & high-density plastic ball screwed for iron pipe (minimum weight 20mm - 210 gms) complete all as specified and dirtected by Engr-in-Charge .

S&F 15 mm angle cock/ stop valves, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15mm bore steel tubing complete all as specified & directed. Make :- Jaquar/Cera/MARC/ Kohler/Somany/Plumber

S & F 15 mm bore bib tap , chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specifed and directed. Make :- Jaquar/Cera/MARC/ Kohler/Somany/Plumber

S & F Two way bib tap 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repairs, complete all as specified and as directed. Make :- Jaquar/Cera/MARC/ Kohler/Somany/Plumber

S&F Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. Make : Jaquar Continental CON-CHR-167 KNB or equivalent in Cera/MARC/ Kohler/Somany/Plumber and as approved by GE

S&F brass chromium plated wall mixture 3 in 1 system with provision for hand shower and over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. Make : Jaquar Continental CON-CHR-273KNUPR or equivalent in Cera/MARC/ Kohler/Somany/Plumber and as approved by GE

S&F health faucet chromium plated ABS body with 1.00m CP long flexible pipe and brass chromium plate nuts & wall hook completed all as specified Make : Jaquar ALD-CHR-587 or equivalent in Cera/MARC/ Kohler/Somany/Plumber as approved by GE

S & F 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S & F CP shower rose fancy type 150mm x 150mm size with 300 / 600 mm long shower arm, fixed in repair to 15mm bore pipe, complete all as specified and as directed. Make :- Jaquar/Cera/MARC/ Kohler/Somany/Plumber

S & F PVC connections 15mm size with PTMT nuts of length 450mm.

S & F SS soap dish complete all as specified and as directed. Make :- Jaquar/Cera/MARC/ Kohler/Somany/Plumber

S&F 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints ,laid on walls complete all as specifed and directed.

S & F 75 mm diaPVC cowls complete all as specified

S & F 100 mm dia PVC floor trap , with ss grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S & F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor completed all as specified and directed

S & F 110 mm PVC (SWR) bends with acess door completed all as specified and directed

S& F 110 mm PVC (SWR) junction single (Single T) equal or unequal with access door

M&L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 20 mm average thickness in single layer and finishing with trowel with a bond coat : SBR polymer @ 10% of cement weight modified cementious bond coat @ 2.2 kg cement/Sqm of surface area complete all as specified and as directed. Make: Asian Paints , ultratech or equivalent in Sikka, Fosroc and STP Ltd. Note : The application shall be executed on any type of surface and on horizontal/Vertical areas.

Providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. (Make: SmartCare Damp Proof of Asian Paints or equivalent in STP/SIKKA/FOSROC). Notes:(1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.

Surface excavation n.exc 30cm deep and getting 15cm deep avg. and getting out in soft/loose soil

M & L for 100 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing completed all as specified and directed.

M & L for 60 mm thick (two colour patern) factory made machine pressed precast cement concrete interlocking paver block any shape and size confirming to IS 15658-2006 M-35 grade ( colour, design and pattern as approved by GE) including 50mm thick compacted bed of dry sand, complete all as specified and directed.

M&L for DWCPE (SN8) drain pipes of 150 mm bore laid in trenches and jointed and tested complete all as specified & directed.

M&L for concrete bed to drain pipe including packing under and haunching against the side of pipes, 150mm bore, in cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) after laying and testing of pipe complete all as specified and directed.

M&L for PCC (1:3:6) type D-2 using 40mm graded stone aggregate as in foundation etc, complete all as specified & directed

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick plastering/rendering on brick work on concrete surfaces in CM 1:4 mixed with liquid water proofing compound as per manufaturer's instructions finishing surfaces even and smooth without using extra cement complete all as specified and directed. (Note :- Liquid water proofing compound shall be measured and paid sepretaely).

Supply only liquid water proofing compound complete all as specified & directed.

M&L PCC (1:2:4) type B-0 using 12.50 mm graded stone aggregate as in branching for manholes, bands, coping, bed plate etc with slightly chamfered or rounded angles including necessary from work, if any, and finishing exposed surface even and smooth without using extra cement complete all as specified & directed.

S&F Precast SFRC square or rectangular manhole covers 75 mm thick with frame medium duty conforming to IS-12592 including necessary reinfocement, complete all as specified and as directed.

Construction of soakage well 2.40m internal dia and 3.00m effective depth including excavation in any type of soil,returning filling & removal , PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in footing brick honey comb/ solid brick masonry in cement 1:4, RCC (M-25 design mix) including TMT steel reinforcement in slab including mainhole cover , filled with brick bats including intercepting chamber screen chamber and disposal of soil, complete all as specified and shown on Drg. Note : 1. During excavation if unexpected water is encountered, the same shall be bailed out / de-watered by the contractor mechanically or manually without any extra cost. 2. The excavated surplus soil shall be removed to a distance exceeding 50 mtr and not exceeding 100 mtr and deposited where directed by the Engineer-in-Charge.

M & L for 18 to 20 mm thick granite (of any type) work( table rubbed and polished) in jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab over and including 10 mm thick screed bed in CM 1:4 including rounding to edge of granite as per required complete all as specified and directed.

M&L for 3 coats of white wash on ceiling including preparation of newly plastered surfaces, complete all as specified and directed.

M&L for 3 coats of white wash on wall including preparation of newly plastered wall surfaces, complete all as specified and directed.

S&F Vitreous China halfstall urinal flat back , size of 590 x 375x 390 mm white colour with including brass waste coupling and fixing with bottal trap (bottal trap paid separately) , providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, complete all as specified and directed by Engr-in-Charge..

S&F piller tap 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as as specified and directed.

M & L for plain cement concrete 1:2:4 ( type B-2 using 20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges etc complete all as specified and directed.

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm bore drain pipe complete all as specified and as directed.

S&F Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to drain and to flushing pipe antisyphonage pipe, brackets for flushing cistern ,PVC (SRW) 'P' trap including provision of cement concrete bedding etc complete all as specified and dirtected by Engr-in-Charge .

M & L for OUT DOOR coloured ceramic chequered tiles 8 to 9 mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified.

M&L 20-25 mm thick machine cut kota stone slab flooring jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab laid over 20 mm thick screed bed of CM 1:6 over neat cement slurry @ 3 Kg/Sqm over sub base including rubbing and polishing complete all as specified and directed by Engr -in Charge.

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240complete all as specified and directed

S & F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws with bent to a curve (of any radius as per required) complete all as specified and directed

Material and labour of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and fittings such as tees, bends, elbow, and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly with and incl Metal flush box with cover plate and frame of suitable size for fixing modular switches/sockets etc and making good disturbed surface in CM 1:3 to match with existing surface for one light point exhaust fan point controlled by one 1-way switch complete all as directed.

All as per srl item no. 101 here-in-before but with 1.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for One 3 pin socket outlet 5 amps on the same board with other switches,

All as per srl item no. 101 here-in-before but with 1.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for one 3pin socket outet point 5 amps on the independent board..

All as per srl item no. 101 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for one 3pin socket outet point on the independent board..

S & F Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

S & F modular socket two-in-one, 6 Amp universal type, 02 module size complete all as directed.

S & F modular Socket, 16 Amp, multipurpose 02 module size complete all as directed.

S & F Modular switch 16 Amp, 1 way, 1 module size complete all as directed.

S & F Modular Fan regulator step type ,120 watts complete all as directed.

Supply and fixing Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps complete all as directed.

Supply and fixing LED tube light fitting, 20 watt. wall mounting type with and including all electric connections with two core PVC insulated, PVC sheathed copper conductor flexible cable complete all as directed.

Supply and fixing LED tube light fitting, 10 watt. wall mounting type with and including all electric connections with two core PVC insulated, PVC sheathed copper conductor flexible cable complete all as directed.

Supply and fixing electric water heater,storage type steel tank with inner glass lcapacity 25 litre, BEE 5 Star rated complete with all accessories etc. complete all as specified

Supply and fixing of PVC/CP connection 600mm long with brass adopter 10 mm dia with washer for intlet & outlet pipe, ISI marked for geyser of any type/Make and capacity complete all as directed.

Supply & fixing of ventilating fan of size 250m sweep plastic body including louver rand making all electric connections complete all as specified and directed.

Supply and fixing of ceiling fan 1200mm sweep , copper winding ,240 volts.50hz BEE star rating 5 service value not less than 6.0 with BLDC motor suitable for regulator complete all as directed

Supply & Fix SPN DB with double door 8 way, 240V with busbar 200A rated, complete all as directed.

S&F of MCB, single pole, 10 to 32 Amp, C curve type 10 KA, 240Volt.complete all as directed.

S&F of MCB, SPN,32 Amp, C curve type 10 KA, 240Volt. complete all as directed.

Supply and fixing of LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing in street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 25mm dia size light grade complete with nut, bolts, washer etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

S&F Sensor hand drier , 230Volts, 50 Hz connecting complete all as specified .

M & L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10sqmm 2 Core specified and directed at site by Engineer-in-Charge.

M & L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6sqmm 2 Core specified and directed at site by Engineer-in-Charge.

M & L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16sqmm 2 Core specified and directed at site by Engineer-in-Charge.

M&L for sand cushioning to under ground cable provided with layers of sand(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge.

Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed at site.

Material and labour for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs below ground level) with top edge of plate not less than 1.5 mtr deep below normal ground level, connected to galvinised earth wire 4 mm dia by means of nuts, bolts and check nuts & washer of galvanised steel or iron all as shown in electical plate No 3 connected to earth testing point all as specified testing on completion including provision of 15mm bore protection pipe light grade and watering pipe 20mm bore medium grade, excavation & earth work, PCC pit with cover, charocol, salt, funnel, wiremesh etc all as specified and as directed. (Note :- Cost of protection pipe & GI wire upto 7.5mtr shall be deemed to be included in the unit rate quoted)

Supply and fixing LED ceiling light fitting 15 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed.

Supply & Fix SPN DB with double door 4 way, 240V with busbar 200A rated, complete all as directed.

S&F isolator suitable for 240 volts AC supply, SPN of capacity 32/40 Amp complete all as specified

S&F Modular AC socket with 25 Amp SP mini MCB, 230 volts, 50Hz,In 4 module sheet metal enclosure complete all as specified

Vipul Construction

a.k constructions

Akhil Enterprises

M/s Durga Traders

M/s Shubh Enterprises

M/S MSD & Associate

S GOURAV PRAKASH ENTERPRISES

M/S Rohit Enterprises