Installation of Community based Solar/Grid powered integrated Micro Irrigation Infrastructure on farm Micro Irrigation on existing STP of 10 MLD at Hakkikat Nagar and 8 MLD at Karnal

Amount

Works Details

Earth work excavation in all kind of soil by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth with all lead and lift in all kind of soil including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering with any lead & lift including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Providing and laying in position ready mixed plain cement concrete with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. All work upto plinth level. M-15 grade plain cement concrete (cement content considered @ 240 Kg/cum) including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.6.22.2.2 Note:- Less cement used as per design mix is recoverable. However no extra payment shall be made if excess cement is used as per design mix.

Providing and laying in position ready mixed M-30 grade concrete with cement content @ 340 Kg/cum for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge (All works upto plinth level) including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.6.24.1+6.26.1 (Note:- Less cement used as per design mix is recoverable. However no extra payment shall be made if excess cement is used as per design mix)

Providing and laying in position ready mixed M-30 grade concrete with cement content @ 340 Kg/cum for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. (All works above plinth level upto floor IVth level) including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.6.24.2+6.26.1 Note:- Less cement used as per ddesign mix is recoverable. However no extra payment shall be made if excess cement is used as per design mix.

Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level and above plinth level. Note:- Reinforcement shall be measured in length including. Hooks if any separately for different diameters as actually used in work, excluding overlaps wastage, overlaps couplings, weled, joints spacer bars, chairs sinys, hangers and anncaled steel wire for other methods of binding and placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. Thermo-Mechanically Treated bars of grade Fe-500D or more as per HSR including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.6.33.6 / 6.34.6

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.6.29.1

Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached plasters, buttresses, plinth and string courses fillets, kerbs and steps etc. including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.6.29.2

Brick work with common burnt clay non -modular bricks of class designation 10.5 in foundation & plinth in cement mortar 1:3 including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Brick work with common burnt non -modular bricks of class designation 10.5 in superstructure above plinth level up to flood IV level in all shapes and sizes in cement mortar 1:3 including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.13.28

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80 mm thick with zinc coating not less than 275 gm/m² including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.9.22.2

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.12.50.1

Providing & fixing steel bar embedded plastic steps of size 263mm x 165mm of orange colour, confirming to specification in pump chambers, manholes etc., having minimum 3mm thick polypropylene polymer confirming to is:10910 encapsulated on 12mm dia ribbed steel bars per IS : 1786. The rate include cost of setting the same to correct lines and levels duly embedded in 1 :2:4 cement concrete including S/o & C/o material and labour charges, loading, uploading, stacking, handling, re-handling etc., complete in all respect as per direction of Engineer-in-charge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.21.28

Lining with design mix concrete of grade M-15 with minimum cement content 240 kg/cum, 100mm thick in side slope with paver including 10mm thick cement plaster (1:5) form work, dressing and preparation of sub grade as per direction of Engineer-in-Charge including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Lining with design mix concrete of grade M-15 with minimum cement content 240 kg/cum, 100mm thick in bed with paver including 10mm thick cement plaster (1:5) form work, dressing and preparation of sub grade as per direction of Engineer-in-Charge including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Graded Bajri for filter material including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Providing PVC seal conforming to IS 12200 of 1987 including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Lining with design mix concrete of grade M-15 with minimum cement content 240 kg/cum, 75mm thick in side slopes with paver including 10mm thick cement plaster (1:5) form work, dressing and preparation of sub grade as per direction of Engineer-in-Charge including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Lining with design mix concrete of grade M-15 with minimum cement content 240 kg/cum, 75mm thick in bed with paver including 10mm thick cement plaster (1:5) form work, dressing and preparation of sub grade as per direction of Engineer-in-Charge including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.10.1

Centering & shuttering including strutting, propping etc. and removal of form for suspended floor, roofs, landing etc. including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.6.30.3

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.13.35

Planning, Design, Supply, installation, testing & commissioning of Solar PV Powered Plant including PV module, Solar Mounting Structure, Cabling, Earthing etc. including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Planning, Design, Supply & Installation of 12W LED Street lighting of 75W Solar Panel, 12.8 V, 30 Ah, Lithium Ferrophosphate Battery including Pole of 5 m above ground level including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Supplying, erection, testing and commissioning of Horizontal motor pumping set for clear water having head 50 m with discharge capacity 800 LPM and power capacity 15 BHP (Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.20.123.9

Supply, Installation, Testing & commissioning of Hydrocyclone Seperator 120 M3/hr. including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Supply, Installation, Testing & Commissioning of Semi Automatic Sand Media Filter of 100 M3/hr including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Supply, Installation, Testing & Commissioning of Screen/Disc Filter of 100 M3/hr including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Providing and fixing cast iron double air valves 65mm internal dia marked with IS: 14845 including carriage, loading, unloading stacking, handling, re-handling etc., drilling, tapping, screwing in valves connections including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.20.14.1

Providing & fixing 200mm internal dia cast iron double flanged swing check type reflux (non return) valves PN-1.6 marked with IS:5312 including nuts & bolts marked with IS:1363, rubber sheet marked with IS:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. Jointing cast iron socketed pipes, valves and specials with run lead caulked joints excluding cost of lead and yarn but including cost of labour, fuel and tools etc. Tested complete. Making flanged joints for cast iron pipes, valves or special including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.20.11.4, 20.4.5 & 20.5.5

Providing & fixing 100mm internal dia cast double flanged swing check type reflus (non return) valves PN-1.6 marked with IS:5312 including nuts & bolts marked with IS:1363, rubber sheet marked with IS:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of Engineer-in-charge. Jointing cast iron socketed pipes, valves and specials with run lead caulked joints excluding cost of lead and yarn but including cost of labour, fuel and tools etc. Tested completed. Making flagged joints for cast iron pipes, valvers or specials (100mm internal dia pipe) including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.20.11.2, 20.4.2 & 20.5.2

Supply, Installation, Testing & commissioning of Plastic Pressure Relief valve 80 mm including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISI marked HDPE pipe of PE-80 grade and PN - 4 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete including cost of HDPE Specials, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications a) HDPE Pipe 110 mm x 4 kgf/cm2 PE-80

b) HDPE Pipe 140 mm x 4 kgf/cm2 PE-100

c) HDPE Pipe 160 mm x 4 kgf/cm2 PE-100

d) HDPE Pipe 200 mm x 4 kgf/cm2 PE-100

e) HDPE Pipe 315 mm x 2.5 kgf/cm2 PE-80

f) HDPE Pipe 200 mm x 2.5 kgf/cm2 PE-80

Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths ISI marked HDPE conduit pipe of 250mm outside dia of PE-100 grade and PN-6 for sewer application as per IS 14333-1996 (amended up to date) in trenches in complete induding cost of HDPE Special, labour, sectional hydro testing (including the cost and conveyance of water to site for testing) and commissioning as per Technical specification including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.21.97.3 Note: E/w to be measured and paid separately. Rate includes cost of all specials like bends, tees required during laying of pipe line along required alignment.

Road Cutting/Trenches to cross the Irrigation Pipes upto 14" including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within all lead & lifts, pipes having diameter from 80mm to 300mm, including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Supply, Installation, Testing & Commissioning of Hydrant Assembly complete 4" including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Providing & fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest Railway Station to site of works. a) Sluice Valve 100mm

b) Sluice Valve 125mm

c) Sluice Valve 150mm

d) Sluice Valve 200mm

e) Sluice Valve 250mm

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within all lead & lifts, pipes having diameter from 300mm to 600mm, including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Horizontal Directional Drilling (trenchless) for crossing of Road, Nala, Canal etc. including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications.

Supplying, erection, testing and commissioning of Horizontal motor pumping set for clear water having head 50. 00 m as per the indicated requirements of discharge 1350 LPM and power capacity 25 BHP Make: KSB, CRI, Kirlosker, Crompton Greeve, Lubi) HSR item No.20.123.20

Providing & fixing 350 mm internal dia cast iron double flanged swing check type reflux (non return) valves PN-1.6 marked with IS:5312 including nuts & bolts marked with IS:1363, rubber sheet marked with IS:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. including S/o & C/o material and labour charges complete in all respect as per direction of Engineer-in-Charge, as per approved drawing/ design supplied by the department & as per PWD specifications. HSR item No.20.11.7

Operation and maintenance of the project for 3 years

Credit of surplus earth

Rakesh Yadav Contractor