SPL REPAIRS TO INDOOR BADMINTON COURTS BLDG NO 349 OFFRS SPORTS COMPLEX) OF AAD COLLEGE AT GMS UNDER GE I GOS

Amount

M&L for 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Dismantling of floor, hearth, walls, roof tiles including bedding (but not backing), and rubbish off permises complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs /blankets, any thickness, including cover fillets complete all as specified and directed.

S&F 12 mm thick plain Gypsum Board False Ceiling with GI frame including all necessary drilling cutting to fix electric items complete all as specified and directed with following:- (a) GI Grid channel 30x25x20 mm of 24 gauge fixed with rawl plug and screw 450 mm centre to centre alongwith perimeter walls. (b) GI channel made to shape 50x40x40 mm of 24 gauge placed @ 600 mm centre to centre from perimeter at wall except long wall (in one span). (c) GI intermediate runners of size 45x10x10 mm of 24 gauge fixed @ 1200 mm centre to centre leaving frame of one side walls (in other span). (d) GI sheet 25 mm wide and 20 mm gauge suspended fixed with steel fastner to roof ceiling and 1200 mm centre to centre including pluging of RCC Slab. (e) 12 mm thick gypsum board filling joints with POP and finishing complete with two coat of plastic emulsion paint over one coat of primer on ceiling.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for Brick work with fly ash bricks straight or curved on plan exceeding 6 m mean radius complete built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on newly plastered walls surfaces making absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall or concrete surfaces on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L preparation of old painted surfaces and applying one coat of white wash but on ceiling complete all as specified and as directed.

M&L applying two coats of acrylic exterior weather proof emulsion paint over a coat of exterior primer on newly plastered wall surfaces/ old decorated wall surfaces, in case of old decorated wall surfaces includes complete removal of existing wall finish of any type with wire brush, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc complete all as specified and directed.

Taking down cover hood of existing rolling shutters (gear operated/ manually size any type ) carefully and completely over hauling the shutters by applying grease and oil in bearing, springs, guide cannels, operating rods, shaft gear boxes, gear wheel etc straightening thoroughly shutter blades, guide channels anchoring rods etc and fixing back the over hood in position and ensure smooth functioning of shutters complete all as specified and directed. (Note : worn out part for replacement will be measured and paid separately.)

S&F in repairs only MS gear box complete as of approved quality of steel rolling shutters complete all as specified and directed.

All as per item No 15 above, but Ball bearing suitable for rolling shutter

All as per item No 15 above, but Guide channel 3" (3.50 mm thick)

All as per item No 15 above, but Cover hood made of 1 mm thk plain GI Sheet pattern

All as per item No 15 above, but Bottom plate 5" (2.25mm)

All as per item No 15 above, but C Class pipe 50 mm dia in shaft

All as per item No 15 above, but Anchoring rod of 25 mm dia of MS pipe

All as per item No 15 above, butSafety lever locks MS with 4 levers

M&L Removing old paints by paint removes or burning off by blow lamps and cleaning with scrapers, any number of coats,any width or girth complete all as specified and directed.

M&L preparation of old decorated Steel painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Complete all as specified & directed.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1998 grade St-240 complete all as specified & directed.

M&L for Fe 410-W (Gde E-250 quality A) Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F mild steel flat iron as in bands straps, supports or stays for rainwater, ventilating pipes including bolt if required, hooks (stay) heavy for large gates,hook and pintle hinges,large hasps and staples, brackets for WHB, hold fasts, wall ties, hooks for hanging fans ,cleats for securing purlins to wood trusses or rafters and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

M&L for preparation of new or previously untreated surfaces of any description, over 10 cm in width or girth, not otherwise described & apply two coat of synthetic enamel (ordinary tint) over & including one coat of red oxide, zinc chrome primer complete all as specified & as directed.

S&F 7mm thick aluminium grills of make "Decogrill' model DG 104 surrounded by aluminium 'C' channel with mesh size 99 X 105 mm including taking down old aluminium grills complete all as specified and directed.

Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed

Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories.) (Area not exceeding 2.00 sqm)

S&F in repairs 18/19 mm thick high density PVC/ WPC solid fibre board with prelaminated PVC sheet as Cupboard and frame including taking down the old cupboard shutters and removing to store complete all as specified and directed.

S&F magnetic catcher with nut and screw of mild steel bright finish complete all as specified and directed.

S&F 40 mm dia cupboard knobs fixed with nuts screw and washer of mild steel bright finish complete all as specified and directed.

S&F 50 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type E-22 complete all as specified and directed

M&L 75 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed.

S&F in repairs CP anodised tubular towel rail, 20 mm dia, D type, 60 cm long between flanges etc complete all as specified and directed.

Demolition of Reinforced Cement Concrete in of any description and in any position not otherwise specifically provided for complete all as specified & directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as speified and directed.

M&L for pre cast cement concrete 1:1.5:3, type A-1, using 20mm graded stone aggregate as in cover slabs, Platforms etc and similar articles with plain faces, set in CM 1:4 complete all as specified and directed.

Taking down eaves gutters and rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

S&F PVC (SWR) pipes 75 mm bore Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F PVC(SWR) bends, any radius of 110 mm bore complete all as specified and directed.

S&F PVC(SWR) bends, any radius of 75 mm bore complete all as specified and directed.

S&F Stack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110 mm PVC pipe complete all as specified and directed.

S&F Stack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 75 mm PVC pipe complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

S&F for circuit/submain wiring alongwith 2x1.5 Sqmm and 1x 1.0 Sqmm of PVC insulated copper conductor FR cable in surface/ recessed in PVC conduit of size 20/25 MM as required including all fittings and fixutures complete all as specified and directed.

S&F Single pole 5 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) to be fixed in MCB DB complete with connection testing and commissioning complete all as specified and directed..

S&F Single pole neutral 40 to 63 Amps rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) to be fixed in MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F bouble door sheet metal enclouser for DB's when MCB's to be used for sinle pole neutral 8 way ,with 200 amp rated bus bar complete all as specified and directed.

S&F next generation energy saving , environment friendly and robust highbay LED with PDC housing suitable for ceiling (surface/ suspended) mouting witth system efficacy upto 150lm/W with capacity 100 watts, 240volts, 50 Hz complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm signle core PVC insulated unsheathed copper FRLS multi stranded conductor cable in and including concealed PVC conduit of size 20/25 MM ISI marked inclusive of tees, bend, elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminted 3mm thick sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sqmm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal incuding cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for One light point controlled by one , one way switch 5 Amp.

All as per item No 64 above, but One fan point controflled by one, one way switch 5 Amps

All as per item No 64 above, but One 3 pin 5 Amps witch socket outlet point controlled by one switch on the independent board

All as per item No 64 above, but One 3 pin 5 Amps switch socket outlet point controlled by one switch on same board

All as per item No 64 above, but One bell point controlled by one bell switch 5 Amp

All as per item No 64 above, but using 2.5 Sqmm single core copper conductor cable of multistranded flame retardent PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combition point including necessary running of 2.5 Sqmm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

M&L in repairs Socket outlet 2 in 1, 3 pin 5 Amp flush type ISI marked, complete all as specified and directed.

M&Lfor in repairs Switch socket combination 2 in 1, 5 A flush type 220 Volts, 50 Hz complete all as specified and directed

M&L in repairs for Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed.

S & F in repairs stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and directed

M&L in repairs for Ceiling rose 3 terminals of PVC/ polycarbonate, as per relevant IS code, ISI marked isolated body complete all as specified and directed.

S&F in repairs LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in repairs LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M&L Switch in repairs piano flush button single pole one way 6 Amps, complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

M&L for planting of "ARECA PALM" plant of height not less than 60 cm incl excavation of pit of size 30X30X30 cm and also include necessary compost, fertilizes, manuring etc whichever required for the growth of plant complete all as specified and directed.

M&L for planting of "UMBRELLA PALM" plant of height not less than 30 cm incl excavation of pit of size 30X30X30 cm and also include necessary compost, fertilizes, manuring etc whichever required for the growth of plant complete all as specified and directed.

M&L for planting of "PHONIX PALM" plant of height not less than 60 cm incl excavation of pit of size 30X30X30 cm and also include necessary compost, fertilizes, manuring etc whichever required for the growth of plant complete all as specified and directed.

M&L for planting of "FOXTEL PALM" plant of height not less than 100 cm incl excavation of pit of size 30X30X30 cm and also include necessary compost, fertilizes, manuring etc whichever required for the growth of plant complete all as specified and directed.

M&L for planting of "THUJA" plant of height not less than 100 cm incl excavation of pit of size 30X30X30 cm and also include necessary compost, fertilizes, manuring etc whichever required for the growth of plant complete all as specified and directed.

M&L for planting of "RED AGLONEMA" plant of height not less than 60 cm incl excavation of pit of size 30X30X30 cm and also include necessary compost, fertilizes, manuring etc whichever required for the growth of plant complete all as specified and directed.

M&L for planting of "TROTHIC FYCUS" plant of height not less than 100 cm incl excavation of pit of size 30X30X30 cm and also include necessary compost, fertilizes, manuring etc whichever required for the growth of plant complete all as specified and directed.

M&L for planting of "AGLONIMA" plant of height not less than 60 cm incl excavation of pit of size 30X30X30 cm and also include necessary compost, fertilizes, manuring etc whichever required for the growth of plant complete all as specified and directed.

M&L for planting of "DURENTA YELLOW HAZE" plant of height not less than 15 cm incl excavation of pit of size 30X30X30 cm and also include necessary compost, fertilizes, manuring etc whichever required for the growth of plant complete all as specified and directed.

M&L for planting of "MAXICIAN GRASS" plant incl excavation of pit of size 30X30X30 cm and also include necessary compost, fertilizes, manuring etc whichever required for the growth of plant complete all as specified and directed.

M&L for 20 mm size Brass sprinklers fixed on 20 mm GI tube of height 750 mm and supported by M.S tripod mode of angle iron of size 40 X 40 X 5 MM and painted with black enaml paint other and of GI tube have an arrangement to fix PVC/rubber hose pipe incl 20 mm size (I/D) fiber reinforced rubbes hose pipe of 30 m length heavy duty type complete all as specified and directed.

M&L for 25 mm size Brass sprinklers fixed on 25 mm GI tube of height 750 mm and supported by M.S tripod mode of angle iron of size 40 X 40 X 5 MM and painted with black enaml paint other and of GI tube have an arrangement to fix PVC/rubber hose pipe incl 20 mm size (I/D) fiber reinforced rubbes hose pipe of 30 m length heavy duty type complete all as specified and directed.

Supply only Chair PVC Moulded with cushion as directed by Eng-in-charge and GE.

Form with back with cushion. All as shown on drawing. Overall size shall be 1800mm long,510mm wide and 900mm high. Steel frame shall be of 25mm square tube of wall thickness 1.6mm. Frame at seat level shall be 300mm wide and at bottam of legs level shall be 460mm wide ,stiffener of 25mm square tube shall be provided at bottam .Top of side stiffner made to shape.Wooden seat shall be teak wood in one piece and of size 1800mm long,255mm wide and 25mm thick bolted to frame with 3mm dia GI bolt fixed with nuts. Steel frame shall be 1500mm long in such a way the teak wood seat shall be project 150mm from frame on each side back rest of wood shall be 1800mm long 150mm wide and 19mm thick fixed frame with GI bolts & Nuts.All steel and iron surfaces shall be painted two coat of enamel paint over coat primer after prepration of surfaces painting done with spray machine .Cushion for seat and back shall be100mm thick of U foam first quality of 32mm density ISI marked and shall be covered with white long cloth before covering with good quality tepastry cloth as per sample approvel by GE. Drawing No: FD-78 (M) (R)

Form without back with cushion. All as shown on drawing. Overall size shall be 1900mm long,510mm wide and 900mm high. Steel frame shall be of 25mm square tube of wall thickness 1.6mm. Frame at seat level shall be 300mm wide and at bottam of legs level shall be 460mm wide ,stiffener of 25mm square tube shall be provided at bottam .Top of side stiffner made to shape.Wooden seat shall be teak wood in one piece and of size 1800mm long,255mm wide and 25mm thick bolted to frame with 3mm dia GI bolt fixed with nuts. Steel frame shall be 1500mm long in such a way the teak wood seat shall be project 150mm from frame on each side back rest of wood shall be 1800mm long 150mm wide and 19mm thick fixed frame with GI bolts & Nuts.All steel and iron surfaces shall be painted two coat of enamel paint over coat primer after prepration of surfaces painting done with spray machine .Cushion for seat and back shall be100mm thick of U foam first quality of 32mm density ISI marked and shall be covered with white long cloth before covering with good quality tepastry cloth as per sample approvel by GE. Drawing No: FD-1027

Peg Table (a) All wood work shall be first class hard wood season teak. (b) Irrespective of whatever is showin in the drg top shall be 18/19mm thick prelaminated particle board exterior grade OSD lamination of teak finish shade and other white balancing lamination as specified here-in-before ISI marked. Drawing No: FD-384 & FD-277

M/s J. P. ASSOCIATES

M/s Ats Electricals

DHABALESWAR ENGINEERING WORKS

HARAGOURI SUPPLIERS

G.KRISHNA MURTHY AND PARTNERS

Likitha Enterprises

M/S SIWALIK AND CO