REPAIR/ REPLACEMENT OF JOINERY IN THE DOORS, WINDOWS, CUPBOARDS, KITCHEN CUPBOARDS AND CONNECTED B/R NATURE WORKS IN THE AREA OF AGE B/R-II UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down chowkat or frames with shutters ( without taking out shutters from frame ) exc. 1.5 sqm but n exc 4 sqm each complete all as specified and as directed.

Taking down chowkat or frames n. exc. 1.5 sqm each with shutters (without taking off shutters from frames) complete all as specified and as directed.

Taking down shutters of any description exc.1.00 sqm and n. exc 2.00 sqm each complete all asspecified.

S&F Plain , solid , straight chowkhats and frames of 2nd class hard wood, wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed.

S&F MS framed work as in door or gates of angle or other section with gusset plates,rail, braces,etc and similar work conforming to Fe 290 Gde E 165 complete.

S&F Pressed steel frames size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, including filling hollow of frame with PCC 1:3:6 etc. complete,all as specified and directed.

All same as per item No. 6 above but size 125x60mm

M&L second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F 35mm thick flush shutter, solid core construction, with block board core and plywood face panel commercial type on both sides.

S&F 35mm thick pre laminated flush shutter, solid core construction, with block board core and designed face Pre- lamination finish on both sides as approved by Engr in charge.

S&F 2nd class HW 30mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete as specified and as directed.

S&F 100mm long butt Hinges, medium weight, cold rolled mild steel complete.

S&F 300mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy.

S&F 150mm long aluminum anodized barrel tower bolt of cast aluminiun alloy section.

S&F Aluminium handles, 150mm size cast type anodised complete all as specified and directed

S&F mild steel 300 mm long, ordinary rat tail rod pattern springs including roller and roller plate complete

S&F Floor door stoper of aluminium alloy body with hard drawn steel spring 140mm long.

M&L Resecuring or Easing and adjusting , without taking down shutters of doors/windows for easy opening /closing ,tightening of hinges and changing its position or adjustment of tower bolts/sliding bolts etc area not exc 2 sqm each complete all as specified and directed.

S&F aluminium alloy powder coated (50 micron) anodized door frame of section 100mm x 44 mm x 2 mm thick, door shutter of aluminium section of size 85 mm x 44 mm x 2 mm thick, top rail and both styles of size 100 mm x 44 mm x 2 mm thick, lock rail and bottom rail of size 115 mm x 44 mm x 2mm thick incl aluminium anodized snap beading and rubber packing & 5.5 mm thick colour designer glass incl 200 mm long tower bolt-2 Nos, 200 mm long aluminium handle -02 Nos on each leaf, 4 lever lock brass 100 mm long mortice lock (Make :- Godrej), & double action floor door spring(Sandhu/Samrat) heavy duty suitable for 1 m wide shutter for each leaf, complete all as specified and as directed.

S&F powder coated three track aluminium (glazed/ gauged) window shutters sliding type incl 5.5mm thick glass or stainless steel wiremesh, without sash bar aluminium saction weighting 0.55 Kg per mtr including frame necessary joining cleats, glazing clips, rubber packing, anodised aluminium beading , sliding channel,roller screws including fittings complete all as per direction of Engr-in-charge.

S&F powder coated aluminium window and ventilator shutters, side hung type with out sash bars, aluminium sections weighing 0.55 Kg/m including frame and necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long ( 1 No.) hinges type B-21 100 mm long (2no.) ,aluminium tower bolt 100 mm long (2no.),suitable handle (1 No.) complete all as specified.

S&Faluminium anodized grills with 6mm x 5mm aluminium section having square gap of 100mm thk with fixing arrangement complete all as specified and directed

Box type Steel windows with double shutters (inside for wiremesh & out side for glass), hinges, steel handle, tower bolt and steel peg stay complete with glazing bars dovetailed or welded .WIRE MESH –Stainless steel wire mesh of 0.3 mm nominal dia of wire and average width of aperature 1.40mm. Grills window shall be provided with grill made of 10mm square MS bars welded to 12mmx6mm thick MS plate . Distance between bars should not be more than 12cm c/c. Total grill unit shall be enamel painted and fixed to window frame with screw . Note: The glazed/Guaged shutter includingguard bars shall be measure once i.e. as per area of opening. No separate payment of separate shutter i.e. glazed and fly proof and guard bars shall be made. Area of shutter shall be the area of opening. The rate quoted by the contractor is deemed to inclusive two coat of paint over a coat of primer of all aspects incl all fitting,glass,wire mesh,guard bar , as specified in Drg No CEDZ/TD/289 sheet 1 R/2 and 2R/2.

Hacking out old brocken glass ( any thickness , size , quality or description ) from wooden/metal frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads

S&F 4mm thick Figured glass, pinhead type with oil putty in squares n exc 0.5 sq. m each pan complete all as specified.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples complete all as specified and directed. Note- Welder with welding machine reqd to fix wiremesh in old steel windows

M&L two coats of synthetic enamel painting over one coat of red oxide primer on new steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of surfaces

M&L two coats of synthetic enamel painting over one coat of pink primer on new wooden surfaces of any description over 10 cm in width or girth not otherwise described.

Dismantling wall and ceiling boards ( fibre pulp, insulation etc ) or insulation boards/ slabs/ blank ets, any thickness, incl cover fillets all as directed.

S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm center to center/ Intermediate channel 0.9 mm thick having to equal flanes of 15 mm each and web of 45 mm suspended from soffit at approx x 900mm center to center with GI cleat and steel expension fastners with and including ceiling section ( not exc 1.2m length ) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50 mm fixed to the intermediate channel at 457 mm center to center. Including Hangers 6mm dia GI up to 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI Flat 40x3mm size 60mm long and expansion hold fastners 12.50 dia. 40 mm long complete all as specified and as directed.

S &F Providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class hard wood fillets, or metal frame and work with GI wire mesh( fillet, Metal frame work and GI Wire mesh paid seprately) including sunk or raised moulding complete all as specified and as directed.

M&L for aluminium anodised snap grid frame work of size 605x605mm for false ceiling with hanging arrangement of 6mm dia G.I (u p to 1200 mm length ) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size and 60mm long and expension hold fastners 12.50mm dia 40mm long complete all as specified and directed.

M&L for Non asbestos 4mm thick fibre cement building boards fixed or laid / inserted to aluminium frame work with screws as in false ceiling fixed in ceiling flat or sloping complete all as specified and directed.

S&F in repair 18/19 mm veenered paticle board solid core, interior grade, with prelaminated both sides with decorative choice laminations as in shelf, drowers, cupboard, partition including wooden/PVC lipping/beading as required etc as directed by Engr-in-Charge

S&F in repair Continuous( piano) hinges(width of flaps 40mm when open , mild steel ,bright finish or electrogalvanised

S&F in repair Magnet ball catcher brass body with 8mm dia steel ball of approved qualities complete all as specified

S&F in repair 150mm long Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F in repair 40 mm dia. cup boards knobs fixed with nut , screw and washer of mild steel , bright finished

S&F in repair of telescopic channels, rollers for smooth sliding of drawers complete all as specified and directed

S&F in repairs Drapery rod 25mm dia aluminium, powder coated teak wood texture finish 1 mm thick, with end bulbs, brackets etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified

M&L for repair to existing steel rolling shutters/ gates by repairing/welding/ oiling/ greasing to anchoring rod,springs,side guide channel etc incl dismantling existing steel rolling shutters of any width and refixing after making serviceable after adjusting springs including two coats of paint complete all as spd and directed.

M&L for repair to existing steel window/door by welding/replacing hinges/handle or removing the steel window shutters from the frame and re-fixing after making serviceable all as specified

S&F 1.00 mm thick plain black steel sheet in hearths; covering to door shutters; covering to doorchowkats (frames);chullah hoods; water tanks; water troughs;ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required incl priming complete all as specified and directed.

M & L framed work such as grills, grating,gate etc with ends of bars shouldered or riveted or forged into spikes framed guard bars and similar work conforming to Fe - 290-0 or E-165 complete all as specified and directed

S&F 150mm size double action spring, hinge, mild steel with steel wire spring, stove enamelled black, fixed in repair complete all as specified and directed.

M&L aluminium (die cast) body door closer hydraulically regulated designation No 2 universal type suitable for door shutter of 701 to 851mm in width and of weight between 36 to 60 kg, fixed in repairs, complete all as specified and as directed.

Demolition of brick work built in cement mortar in any description and position complete all as specified and directed.

M&L for Brick work with sub class B bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and directed.

M&L for Vitrified Ceramic light shed Coloured tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles n exceeding 0.36sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified.

All same as per srl item No. 54 above but on vertical surfaces such as skirting / dados with rendering in 10 mm thick CM 1:4 complete all as specified.

M&L for coloured non skid ceremic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jounted in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed coloured ceremic tiles sizes 450x300x 7mm thick tiles on vertical surfaces , such as skirting/dado, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack size 900 x 750 x 250 mm deep made out of 1mm thick sheet including fitting arrangement complete. Make- Maharaja/Nirali/Prayag

Taking down cement or lime plaster any description on brick or stone walls,ceilings etc including raking out joints, hacking for key scrubbing down with waters and removal of rubbish from the premises as directed.

M&L Rendering 15mm thick in cement mortar 1:4 on fare faces of brick work or concrete surfaces and finished the surface even and fair without using extra cement complete all as specified.

M&L for preparation of new plastered surface of walls and applying two coat of cement base paint over 2mm thick coat of wall care putty and a coat of cement primer complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces and finished the surface even and fair without using extra cement complete all as specified.

M&L for preparation of new plastered surface of of walls and applying two coat of OIL bound distemper over a coat interior primer and 2mm thick wall care putty on walls complete all as specified and directed.

M&L rendering 5mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces and finished the surface even and fair without using extra cement in ceiling complete all as specified.

M&L for preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado, floor & vertical surface laid over cement screed and including 15 mm thick CM 1:4 as in backing coat and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specifed and dircted .

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specifed and directed.

M & L for providing RCC 1:2:4 type B- 1 using 20 mm grade stone aggregate as in slab supportetd on walls, shelves, Chajjas, cantilevers or similar work including necessary form work and complete all as specified and as directed.

M&L TMT bars 10mm dia and over in reinforcement cut to length bent to shape required incl hooking ends and binding with MS wire (annealed) not less than 0.9mm dia all as directed and specified.

Providing & Fixing in repairs factory made 18 mm thick one side decorative and other side balancing lamination factory pressed HDHMR Board of action Tesa and equivalent including 2 mm thick with PVC edge banding tape with hot glue by edge bending machine etc with auto closing spring loaded hinges (hydraulic) type) etc as in Cupboards shutters, sides, top, bottom and in any position complete as per direction of Engr-in-Charge complete as per direction of Engineer-in-Charge.

S&F in repair solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site including of PVC frame of size 5mm thick PVC sheet fillet of width 35mm as per specification and drawing.

M&L for Preparation of old plastered surface of wall by removal of existing treatment on surface of walls by scrapping down with mechanical grinder complete and applying approved Designer wall Paper roll over a coat of interior primer and 2mm thick wall care putty all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as approved having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and including cutting chasing of wall, complete all as specified and directed.

S&F in repair steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240

S&F 15 mm thick slected quality toughned glass Plain or full frosted cut to size and shape as per site requirment for fixing in doors, windows, hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required and includind all necessary fixing arrangement for partition or door and with lock and self closing device (Fixed type windows should be MS framed powder coated with Georgin pattern) as approved and directed by Engr-In- Charge complete all as specified and directed. Make - Modi, saint gobin or equivalent.

S&F Door handle H type 25x300mm (Model No-IGH- 55 of make. Insta or equivalent as approved by GE complete all as specified and as directed.

M&L for Grinding, polishing /bevelling of edges on 12mm thick or more toughened glass complete all as specified and as directed.

M&L two coats of Indigo/Asian/Berger emulsion floor paint including preparation of old /new surfaces of floor complete all as specified and as directed.

M&L in repair for Steel rolling shutters, in repair with out ball bearing, with thickness of laths 1.00 mm as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete: push pull or Manual type complete all as specified and as directed. Note : Area of opening should be measured for payment purpose.

S&F for 2 mm thick Plain colour PVC sheet fixed with screw over any type of MS/steel gate grill etc. omplete all as specified and directed.

S&F in repair curtain rod/ rail with stainless steel rod fancy type 25 mm dia including bracket and fancy type lattoo, etc complete all as specified and directed.

M&L re-securing or easing and adjusting sliding doors, (with/ without taking down shutters) for easy opening/ closing, by repair/ replacing tracks, sliding wheels, clits, doors etc and changing its position or adjustment of tower bolts, sliding bolts area not exc 4 sqm each complete all as specified and as directed.

M/s Shubh Enterprises

A R construction

MAA SANTOSHI ENTERPRISES

Gaurav India Corporations

Vipul Construction

STAR CONSTRUCTION CO

Akhil Enterprises

garnet engineers contractors