WELCOME MAINTENANCE IN OFFICER MD ACCN AND OTHER MISC WORKS AT AHRR UNDER GE EM RR HOSPITAL, DELHI CANTT 10

Amount

Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified & directed.

M&L for 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and fair without using extra cement, complete all as specified & directed.

M&L for rendering 5 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling, including finishing the surface even and fair without using extra cement complete all as specified.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over 1 to 2mm thick cement base wall care putty, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper over 1 to 2mm thick cement base wall care putty, complete all as specified and directed.

M&L for applying 1 to 2mm thick cement base wall care putty on plastered surface of walls and making the surface even & smooth for receiving distemper/ paint of any description, complete all as specified and directed.

All as per item No 06 here-in-before but on ceiling surfaces.

M&L for complete removal of existing treatment from the old decorated plastered surfaces of walls, complete all as specified and directed.

All as per item No 08 here-in-before but on ceiling surfaces.

M&L for applying two coats of oil bound distemper on even & smooth surfaces of walls, complete all as specified and directed.

All as per item No 10 here-in-before but on ceiling surfaces.

M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper, complete all as specified and directed.

All as per item No 12 here-in-before but on ceiling surfaces.

M&L for preparation of old wooden surface of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified & directed.

M&L 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes, complete all as specified & directed.

M&L 10 mm thick screed bed or bedding layer in cement mortar (1:4) to receive wall tiles, complete all as specified & directed.

M&L for vitrified ceramic coloured tiles 8mm to 9mm thick (square/ rectangular) polished of light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.

M&L for vitrified ceramic coloured tiles 8mm to 9mm thick (square/ rectangular) polished of light shade, area of each tiles not exceeding 0.36 sqm, in dado/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified & directed.

M&L for coloured glazed ceramic wall tiles as in vertical surfaces of size 450 mm x 300 mm x 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified & directed.

S&F in repairs galvanised mild steel wire cloth 0.40 mm nominal dia of wire and average width of aperture 1.30 mm fixed with tinned tack or galvanised wire staples or fixed with nails and wooden beads, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified.

S&F 4 mm thick sheet glass, ordinary quality and glazing with glazing clips/oil putty in squares not exceeding 0.5sqm in each pane, complete all as specified.

S&F in repairs stainless steel curtain rod 20-22mm dia including brackets, side knobs etc, fixed to walls, complete all as specified and directed.

M/S VERMA BUILDER (BID ID -3080612)

R. S. Associates (BID ID -3076481)

Shivam Firetech Engineers (BID ID -3084071)

DEV CONSTRUCTION (BID ID -3086426)

ACR ENTERPRISES (BID ID -3084285)

sony engineering works (BID ID -3083775)

friends associeates (BID ID -3084798)