SPECIAL REPAIRS TO SEPARATED FAMILY SF OR MARRIED ACCOMMODATION BLOCK NO 5 AT FARM AREA UNDER GE WELLINGTON

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls or ceiling, etc.including raking out joints, hacking for key, scrubbing down with water, etc ,complete all as specified and as directed

Rendering 5mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface, in ceiling of chajjas/ roof projection, etc finished even and smooth without using extra cement all as specified and directed.

Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work / concrete surfaces, finished even and smooth without using extra cement compete all as specified and directed

Dismantling, floor hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm/ 350x250x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster in cement mortar 1:3 on fair face of brick/ stone or concrete surface complete all as specified and as directed.

Coloured Non skid ceramic tiles 7 to 8mm thick (Square/ Rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm as in floors etc., and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in cement mortar 1:4 complete all as specified and directed.

Coloured Non skid Ceramic tiles 7 to 8 mm thick (Square / Rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including Screed bed or bedding layer 15mm thick for laying floor finishes in cement mortar 1:4 complete all as specified and as directed.

Coloured Non - skid Ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in dado/ Skirting etc. and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Taking down chowkat or frame with shutter (without taking of shutters from the frames) area not exceeding 1.5 Sq mtr each all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be printed to match with printed sheet, reinforced with M.S Square tube, supplying and fixing in opening as per specification and drawing.

Factory made solid panel PVC Moulded Door shutters 28 to 30mm thick (stile) but 2mm thick 3D wood grains moulded PVC sheet polyurethene painted on front face and 2mm prelam PVC sheet on front and back face with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face, supplying and fixing in frame at site as per specification and drawing.

Supply and Fix UPVC ventilator frame shall be made of PVC material confirming to IS-10151 the ventilator frame of extruded UPVC section having overall dimensions of 100mmx62mmx50mm having wall thickness 2mm+- 0.2mm. Corners of wall frame shall be joined by MS galvanised brackets joints mitred and plastic welded. The hinge side vertical outer frame shall be reinforced with galvanised MS tube of wall thickness 1mm +/- 0.1mm and the tie rod shall be provide at the bottom of the frame all as specified and directed. Glazing (1) : The ventilator system should be including glazed with 5.5mm thick glass of size as required in ventilatior frame (louvered type) and stainless steel wiremesh fixed at outer side with frame as per manufacturer instructions including all fittings and necessary locking arrangements complete all as specified and directed. (Glass will be paid seperately)

Providing and fixing factory made UPVC white colour Sliding window Three track, Area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm ((+) or (-)0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 (+) or (-)0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories of area not exceeding 2 Sqm Note: (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. (ii) Net Opening will be measured for payment purpose.

Providing and fixing factory made UPVC white colour Sliding window Three track, Area exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm ((+) or (-)0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 (+) or (-)0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories of area exceeding 2 Sqm Note: (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. (ii) Net Opening will be measured for payment purpose.

Taking down shutter of any description exceeding 1 Sqm but not exceeding 2 Sqm each all as specified and directed.

Mild steel Framed work such as grill, grating etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron door, ladders, framed balusters, walk ways, railings, framework of water tanks and simialr work conforming to Fe290 Gde E-165 all as specified and directed.

Butt hinge, 100 mm long medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

Extruded aluminium alloy handles 150 mm long, fabricated type, anodised complete all as specified and as directed

250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section 150 mm long all as specified and directed.

Preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

Floor door stopper of aluminium alloy body 150mm and tongue, anodised with hard drawn steel spring fixed in floor all as specified and directed.

Floor door stopper, with 150 mm long cover plate, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor including fixed in repairs all as specified and as directed.

2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint all as specified and as directed.

Taking down Shutter of any description exceeding. 1 sqm and not exceeding 2 sqm and refixing in the same opening each all as specified and directed.

Taking down Shutters of any description exceeding. 1 sqm and not exceeding 2 sqm all as specified and directed.

35 mm thick flush shutter, solid core construction, with block Board Core and plywood face panels covered with decorative Face Veneer on one faces with lipping / frame on one faces, complete all as specified and as directed.

Granite 20mm thick machine cut, as in floor bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed in cement mortar 1:4 all as specified and directed.

Rounding to edges of stone/ granite slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed.

Demolition of cement Concrete reinforced in ground floors and pavings not exceeding 15 cm thickness below or above ground level all as specified and directed.

Reinforced cement concrete (nominal mix) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves Type B1 1:2:4 (20 mm graded aggregate) complete all as specified and directed.

Use and waste of steel Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. Fair finished surfaces of concrete flat complete all as speicified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 at Sunken floor finished smooth and even without using extra cement including using liquid integral WPC as per manufacturer instructions complete. Note: Supply of Integral water proofing compound will be measured and paid seperately.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including cleaning the surface and APP based polymeric membrane weighing minimum 3Kg/sqm and minimum 300 thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and as directed.

20mm thick cement mortar 1:4 screed mixed with liquid water proofing compound over APP membrane in sunken floor all as specified and directed. Note: Supply of liquid water proofing compound will be measured and paid seperately.

40mm dia light grade GI spout at the lowest point with 30cm projection beyond the outer face of the wall in sunken floor all as specified and directed.

Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concreting, filling in sunken portion complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete) set in cement mortor for 100 mm internal dia of pipe complete all as specified and directed

PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

PVC (SWR) 110mm dia pipe single socketed in any length, with rubber ring joint fixed to walls with clamps complete all as specified and directed.

PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls with clamp, complete all as specified and as directed.

PVC (SWR) bend of any radius 110 mm dia complete all as specified and as directed.

PVC (SWR) bend of any radius 75 mm dia complete all as specified and as directed.

PVC (SWR) bend of any radius 110 mm dia with access door complete all as specified and as directed.

PVC (SWR) bend of any radius 75 mm dia with access door complete all as specified and as directed.

PVC (SWR) branch piece single, (single Y) equal or un equal of 110mm bore of pipe complete all as specified and directed

PVC (SWR) branch piece single, (single Y) equal or un equal of 75mm bore of pipe complete all as specified and directed

PVC (SWR) branch piece double, (double Y) equal or un equal of 75mm bore of pipe complete all as specified and directed

Stack clamps out of 50mm by 5mm by flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 75mm bore of pipe, complete all as specified.

Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of 100mm bore of pipe, complete all as specified.

PVC (SWR) vent cowl of 75 mm bore of pipe complete all as specified and directed.

PVC (SWR) vent cowl of 110 mm bore of pipe complete all as specified and directed

Demolition of Brickwork, stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Pre-cast cement concrete block masnory with solid block exceeding 10cm in width and setting in cement mortar 1:6 type C1 1:3:6 using 20mm graded stone aggregate complete all as specified and directed

Sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm and PVC waste pipe of 32mm bore and of suitable length, fixed in repairs complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm dia and connections all as specified and directed

Taking up or down steel tubing and connections for 20mm dia and connections all as specified and directed

Supply, laying and testing steel water tubing of size 15 mm dia, medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing with all fitttings complete all as specified and directed.

Supply, laying and testing steel water tubing of size 20 mm dia, medium grade galvanized with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing with all fitttings complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white with P or S trap incl flushing pipe, seat and PVC seat cover (white) closed pattern with flat bottom & cover brass chromium plated hinging device, incl connection to drain and to flushing pipe, antisyhonage pipe etc and including fixed in repairs complete all as specified and directed.

PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white, with inlet ball valve, float and handle including connecting to bracket etc and fixed in repairs complete all as specified and directed.

Vitreous chian wash basin, white, flat back, size 550mm x 400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, with and including brass chromium plated perforated waste coupling / fittings 32mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32mm bore and of suitable length, 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

Bib tap fancy type long body chromium plated 15mm dia complete including fixed in repairs all as specified and directed

Stop valves, fancy type, 15mm bore chromium plated with long shank and cup concealed type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair all as specified and directed

Stop valve cast copper alloy, 15mm bore screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated ,15mm bore including fixed in repair all as specified and directed

PVC connections 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

Chromium plated 125mm shower rose with or without swivel joint, size, including fixing to steel pipe or union, fixed in repairs complete all as specified and directed.

Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

Sheet Glass shelves assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chroumium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fix in repairs of Chromium plated soap dish complete all as specified and directed.

Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including fixed in repairs all as specified and directed.

PVC (SWR) floor/ Nahani trap 75mm outer dia, plain with grating including jointing to waste pipe with solvent cement all as specified and as directed.

Gratings 125mm dia with / without waste hole, fixed in repairs complete all as specified and as directed.

Preparaton of old decorated plastered or unplastered surface on ceiling by brooming down or by steel wire brushes, scrapping down smoke spots, moulds, moss and efflorecent salts, trading oil , greasy spots etc. and applying two coat of white wash on ceiling , complete all as specified.

Preparaton of old decorated plastered or unplastered surface of walls by brooming down or by steel wire brushes, scrapping down smoke spots, moulds, moss and efflorecent salts, trading oil , greasy spots etc. and applying two coat of white wash on walls , complete all as specified and directed.

Complete removal of existing treatment on surfaces of wall and applying one coat of primer (water thinable/solvent thinable) over one coat putty even and smooth and applying two coats of oil bound emulsion distemper (washable) complete all as specified and directed.

Preparation/ removal of old treatment of plastered/ stone/brick wall surfaces and applying two coats of Exterior Emulsion Paint (Anti Fungal) white or tinted complete all as specified and as directed. Note :1. Rates shall be quoted with required scafolding for a height upto 10 meter buildings.

Preparation of old painted steel surfaces and steel based materials of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted wooden surfaces and wood based materials of any description not other wise over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Anodised aluminium curtain road fixing with brackets including fixed in repairs all as specified and directed.

Machiner cut kota stoneslab flooring 20-25mm thick over 20 mm thick cement screed base of cm 1:6 laid and jointed with grey cement slurry mixed with pigment to matchg the shade of the slab including rubing and polishing complete all as specified and directed.

Machiner cut kota stoneslab flooring 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed cement mortar 1:4 of 10mm thick and joined grey cement slurry mixed with pigment to matchg the shade of the slab including rubing and polishing complete all as specified and directed.

Stainless steel plate rack of size 0.9m X 1.2m complete all as specified and as directed.

Chequered cement concrete colour tiles 30 cm x 30 cm x 20-22 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors, steps etc over and including 20 mm thick screed bed in cement mortar 1 :4 complete all as specified and as directed.

40mm thick Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor, complete all as specified and directed.

Taking down aluminium/ copper point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish matching with the existing surface of walls, floors, etc. all as specified and directed.

Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in PVC casing and caping complete with fittings / accessories including 1.5 Sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for ONe light/ Ex-fan point controlled by one switch 5 Amps SP all as specified and directed. Note: 1. Sunken box/ Cover plate for modular plate for modulat switches, sockets etc will be measured and paid separately under relevant items and blank plate required if any will be deemed included in the item rate. 2. Cutting chases in stone masonry wall will be measured and paid separately.

All as per Item No.93 hereinbefore but One light point controlled by two way switches, with cable 1.5 Sqmm size all as specified and directed.

All as per Item No.93 hereinbefore but One 3 pin 5A switch socket outlet on independent Board all as specified and directed.

All as per Item No 93 hereinbefore but One 3 pin 5A Socket outlet on same board complete all as specified and directed

All as per Item No 93 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

All as per Item No.93 hereinbefore but point wiring complete One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size all as specified and directed.

Bell Multi Music type 230 volts single pole all as specified and directed.

Ceiling rose, 3 terminals PVC / polycarbonate, isolated body all as specified and directed.

Modular switch one way 6A 230V AC 50 HZ SP one module all as specified and directed.

Modular switch two way 6A 230V AC 50 HZ SP one module all as specified and directed.

Modular bell push switch 6A 230V AC 50 HZ SP one module all as specified and directed.

Modular switch one way 16A 230V AC 50 HZ SP one module all as specified and directed.

Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified and directed.

Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified and directed.

Modular Metal Flush Box 1/2 module rectangular block for mounting, switches, sockets, fan regulator etc. all as specified and directed.

Modular Metal Flush Box 3 module rectangular block for mounting, switches, sockets, fan regulator etc. all as specified and directed.

Modular Metal Flush Box 4 module rectangular block for mounting, switches, sockets, fan regulator etc. all as specified and directed.

Modular Metal Flush Box 6 module rectangular block for mounting, switches, sockets, fan regulator etc. all as specified and directed.

Modular White Cover Plate With Frame White cover plate with frame, 1 module all as specified and directed.

Modular White Cover Plate With Frame White cover plate with frame, 2 module all as specified and directed.

Modular White Cover Plate With Frame White cover plate with frame, 3 module all as specified and directed.

Modular White Cover Plate With Frame White cover plate with frame, 4 module all as specified and directed.

Modular White Cover Plate With Frame White cover plate with frame, 6 module all as specified and directed.

MCB DB TPN 6 way 415 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB SPN 4 way 240 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.

Supply and fixing amp rating 415 V,10 KA 'C' curve miniature circuit breaker (MCB) of TPN 415V 40 to 100 Amps capacity all as specified and directed.

Supply and fixing amp rating 240 V,10 KA 'C' curve miniature circuit breaker (MCB) of SP 6 to 32 AMP, all as specified and directed.

All as per item No. 119. herein before but SP 6 to 32 Amps capacity all as specified and directed.

Taking down old unsv FTL fittings, Supply and fix 22W LED 125 Lum/Watts 4ft batten comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white all as specified and directed. Make. HavellsCat Part No. LHEXAWPN7IN1W025 / CG/ Philips / Bajaj.

Taking down old unsv FTL fittings, Supply and fix 12W LED surface panel light coiour white all as specified and directed. Make. LUCKER Cat Part No.LNPSRR12/ CG/ Philips / Bajaj.

Taking down old unsv 2ft FTL fitting Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make - Havells Cat Part No-LHEXACP5IN1W010 / Philips/CG/Orpit

Taking down old unsv Indoor wall light fitting,Supply and fixing of suitable size complete all as specified and directed. Make - HAVELLS Cat Part No-LHFOFWE1TZ1W012/ Philips/ Crompton/ LUCKER

Single pole and neutral sheet metal enclosure with a two pin and earthplug and socket complete with one single pole MCB 20 Amps SP all as specified

Taking down Submain wiring with aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable4 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 20mm dia with all fittings all as specified and directed.

Taking down Submain wiring with aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM

Taking out unsv heating element and supply and fix new heating element 1.5 KW Dual clip type with rubber gasket suitable for geysers up to 25 Ltr capacity all as specified and directed.

Taking out unsv Geyser Copper Drum and supply and fix new copper Drum suitable for geysers up to 25 Ltr capacity all as specified and directed.

m/s prabakaran (BID ID -3298068)

K.AYYAPPAN (BID ID -3299603)

ACE PROMOTERS (BID ID -3300773)

AR Mohamed Yakub and Co (BID ID -3300586)

CRD TRADERS (BID ID -3300555)

GUNASEKARAN AND CO (BID ID -3298077)

GMS Builders (BID ID -3300065)