REPAIR TO VARIOUS TYPE OF STEEL FURNITURE OF BSO UNDER GE (MCTE), MHOW

Amount

(A) Removal of following existing unserviceable steel components of various MES F/DB/FD/TP/MAP furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, welding, glueing, providing hinges, denting, placing everypart in-tact, as applicable as per drgs (B) Work will be executed where the furniture exist in different User Units of GE (MCTE) Mhow including BSO's Furniture Yard as directed by Engineer-in-Charge

Almirah Large Steel - FD-67 / 1031/ TP/MAP

Brass lever locks (Make : LICO/ Rina/ Nova/ Harrison) rest as per drg

CP Handle as per drg

Leg as per drg

Repairs to door as specified including replacement of hinges

Repair to existing shelf including welding as per drg

Replacement of shutter as per drg with two coat spray painting to match the body

Replacement of looking mirror 5mm thick (Modiguard/ Saintgobin) rest as per drg

S&F new shelf as per drg

Almirah Medium/ Small Steel/ glazed door - FD-1032/FD-104(M)

Brass lever locks (Make : LICO/ Rina/ Nova/ Harrison) rest as per drg

CP Handle as per drg

Leg as per drg

Repairs to door as specified including replacement of hinges

Welding works wherever required as directed by E-in-Incharge

Repair to existing shelf including welding

S& F new shelf as per drg

Glass pane as per drg

Locker Steel - FD-1029/257

CP handles as per drg

S/S Hasp & Staple, rest as per drg

Repairs to door/ sides including replacement of hinges

Brass lever locks (Make : LICO/ Rina/ Nova/ Harrison) rest as per drg

Legs as per drg

CP Conduit pipe as per drg

Replacement of complete locking devices as per drg

Welding wherever required as directed by EIC

Teapoy Varandah - FD-383/255

Rubber shoe std quality as per drg

18mm thick Post forming top (PFT) exterior grade (Make : Century/ Greenply/ Action tesa) shall be provided on top of teapoy varandah complete. Rest all as per drg

10mm thick MS bar welded to each leg and one centre stiffner provided including weldging works wherever required complete as directed by EIC

Table Bed Side - FD/E6/MAP/15 (R) / HFD-2005

Replacement of handles of drawer as per sample held with office

Replacement of sides with 18mm thick Pre laminated particle board exterior grade

18mm thick Post forming top (PFT) exterior grade (Make : Century/ Greenply/ Action tesa) shall be provided on top of table complete. Rest all as per drg

Replacement of drawers (lower/ upper) with Std quality channel as per drg and as directed by EIC

PVC rubber shoes

Painting of frame one coat synthetic enamel paints

S&F new rail (top/ bottom) 18mm MS Square pipe 18 G thick irrespective of what is shown in drg complete

Table Office Officer Steel - FD-84/ 1003

Legs as per drg

Replacement of lock of drawer as per drg (Make : LICO/ RINA/ Harrison)

Repairs to Drawer/ shutter including tinkering/ denting, welding, etc. all as shown, as specified & as directed

Stiffeners as per drg

PVC Shoes std quality all as per drg

Welding the joints of legs/ square tube as per drg

18mm thick Post forming top (PFT) exterior grade (Make : Century/ Greenply/ Action tesa) shall be provided on top of table complete. Rest all as per drg

Table 3x2 with and w/o Drawer - FD-1007/1008

Welding wherever required as directed by E-in-Incharge

18mm thick Post forming top (PFT) exterior grade (Make : Century/ Greenply/ Action tesa) shall be provided on top of table complete. Rest all as per drg

Repairs to Drawer include tinkering/denting, painting, welding, etc. all as shown, as specified & as directed

Rubber shoe std quality as per drg

Locks as per drg (make Lico/ rina/ Nova)

Bed Hard for JCO/ORs - CWE/M/TD/05/07/MAP-II/01

12mm thick plywood top BWR grade (Make : Century ply/ greenply/ archidply) as per existing shape and size with 8 Nos shunken nut/ bolts, appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed

Hard rubber shoe std quality as per drg

Bed Hard Officer - FD/E6/MAP/8(R)/TP

12mm thick plywood top BWR grade (Make : Century ply/ greenply/ archidply) as per existing shape and size with 8 Nos shunken nut/ bolts, appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed

Hard rubber shoe std quality as per drg

Replace particle board of head rest/Foot rest exterior grade with PVC edging complete as per drg.

Table Centre Two Tier - CWE/M/F/29/95

18mm thick Post forming top(PFT) exterior grade (Make : Century/ Greenply/ Action tesa) shall be provided on top of table complete. Rest all as per drg

Hard rubber shoe std quality as per drg

Chair Verandah - FD-19, FD-256, FD-359/MAP/11/MAP-II/15

S& F new Legs, each one piece made of MS conduit pipe 16G, 19mm dia including painting with two coats of synthetic white enamel paint over a coat of red oxide primer as per drg.

Welding joints of leg of 19/20mm MS tube & other joints as per drg as directed by EIC

Hard rubber shoes as per drg

Painting to the entire frame including removing old unserviceable cane from chair verandah & recaning the chairs etc with approved new plastic cane 4mm wide half round as per Matt Pattern all as specified (colour of cane shall approved by EIC/ GE)

Stiffner of size 12mm square pipe 18G x 16" with appropriate MS plate shall be welded below the seat of chairs for extra support to seat all as directed by EIC

S&F PVC seat and Back as per drg (Make : AMKO/ COMFO/ Classic/ HARMONY)

Chair Writing - FD/E6/MAP/12

Taking out old/ unserviciable seat and supply & fixed new seat made of 12mm thick hot pressed plywood with acrylic/ poly propylene fabric and mouled polyurethene foam 50mm thick and 50 density with PVC lipping all round complete all as shown on drawing.

All as above but unserviciable back complete.

Taking out old broken/ unserviciable arm rest of chair writing steel & supply & fixing new PU arm rest as per drg

Preparation of old painted surface by scraping & rubbing and applying one coat of synthetic enamel paint (black) to MS tubular frame of chair writing steel.

Taking out unserviceable/ broken frame and S&F new frame as per drg duly painted as per drg and as directed by EIC

Chair Computer - FD/E6/MAP/01CWE/M/F/02/02

supply & fixed new seat made of 12mm thick hot pressed plywood with fabric polyproplene/ acrelic (range of fabrics not less than Rs 300/ RM) and mouled polyurethene foam 40 Density with PVC lipping all round complete all as shown on drawing.

All as above but back complete.

Supply & fixing new arm rest made of polyurethene as per drg

Complete pedestle assy as per complete all as per drg and directed.

Supplying and fixing new twin wheel castors of required dia complete all as directed.

Supply & fix new chrome free cylinder tube shall be fixed complete all as per drg and directed.

Taking out old/ un serviceable shifting locking lever assembely and Supply & fix new as shown in drawing complete all as directed.

Table Computer - FD/E6/MAP/03 & CWE/M/F/01/02

18mm thick Post forming top (PFT) exterior grade (Make : Century/ Greenply/ Action tesa) shall be provided on top of table complete. Rest all as per drg

Removing of old broken drawer with telescopic channel from existing table computer and providing new drawer 75mm deep made of 18mm thick pre-laminated particle board bonded with phenol fomaldehyde synthetic resin, exterior grade, one side with approved shade and balancing with lamination on other side alongwith Telescopic channel of required shape and size complete all as directed.

Removing of old broken key board tray with telescopic channels from existing computer table and providing new key board tray of 18mm thick pre-laminated particle board bonded with phenol fomaldehyde synthetic resin, exterior grade, one side with approved shade and balancing with lamination on other side with including teak wood beading of 4mm x 18mm size fixed with Fevicol and Panel Pin and duly given a coat of high glossy french polish matching to existing surfaces alongwith Telescopic channel of required shape and size complete all as directed.

Removing of old broken mouse tray with telescopic channel from existing table computer and providing new mouse tray made of 18mm thick pre-laminated particle board bonded with phenol fomaldehyde synthetic resin, exterior grade, one side with approved shade and balancing with including teak wood beading of 4mm x 18mm size fixed with Fevicol and Panel Pin and duly given a coat of high glossy french polish matching to existing surfaces lamination on other side alongwith Telescopic channel of required shape and size complete all as directed.

Sides of 18mm thick prelaminated particle board rest all as per drg

One coat synthetic enamel paint first quality brush painting to table computer complete all as directed by EIC

(A) M&L for painting one coat of synthetic enamel paint of contrast colour/ Hammertone finish or approved shade as directed both internally & externally through spray gun machine to the following furniture articles after preparation of surfaces as reqd. All are of MES pattern viz F/FD/DB/MAP series or Similar items including removing of dents, applying putty to level the surface before painting, all as specified and shown on drgs and directed by Engineer-in-Charge. (B) Work will be executed where the furniture exist in different User Units/Md accns of GE (MCTE) Mhow including BSO's Furniture Yard as directed by Engineer-in-Charge

Almirah Steel Medium/ Small/ glazed door (FD-1032)

Almirah Steel Large (FD-67/351, 1031)

Bed Hard JCO/Ors (MAP)

Bed Hard Officers (MAP)

Ladder for loft (FD-238)

Locker Steel (FD-1029/257)

Rack steel Adj 6 tier (FD-106)

Rack shoe steel (MAP)

Table office officer steel (FD-1003)

Teapoy Varandah (FD-383)

Table 3x2 with and w/o drawer (FD-1007/1008)

FMN Set for charpoy (FD)

Satya & Sons

Shubhi Enterprises

M/S chandra enterprises

Budget Furniture Industries

SUNIL ENTERPRISE