GE 861 EWS-42/2024-25

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

-ditto- as per item no 2 above but exc 1.5 m depth beyond the first 1.5 m complete all as specified and directed.

M&L for hard core of broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 150mm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC type D2,1:4:8 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (Design Mix M-25) using 20mm graded crushed stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (Design Mix, M-25) using 20mm graded crushed stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Reinforced cement concrete (Design Mix, M-25) using 20mm graded crushed stone aggregate in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Reinforced cement concrete (Design Mix, Mix-25) using 12.5 mm graded crushed stone aggregate as in chajjas and similar work complete all as specified and directed.

S&F Mild Steel TMT bars 10mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clip complete all as specified and directed.

All as per item No 10 here-in-before but 8mm dia complete all as specified and directed.

All as per item No 10 here-in-before but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams for rough finished surfaces etc. complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed.

Form work to chajjas and similar work including edges for rough finished surfaces of concrete complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheets 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Mild Steel work as in framed roof trusses, purlins, rails and fastenings including distances pieces, cleats etc conforming to Fe 410 - O or Fe 310-O complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

M&L for framed work such as grills etc with ends of bars shouldered or riveted or forged into spikes, framed guard bars and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L for two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces including preparation of surfaces over 10 cm width or girth complete all as specified and directed.

M&L for 3mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and directed.

M&L for Chowkhat and frames of 2nd class hard wood, wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S&F 35mm thick 2nd class hardwood, factory made plain framed, panelled shutters (two panel), with lock rail and panel of 9mm thick B.W.P. commercial plywood or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick 2nd class hardwood glazed & skeleton shutters, open repeated & prepared to received glass, gauze etc. (without sash bars) edges of framing plain for securing glass etc. fitted to chowkhats complete all as specified and directed.

S&F Mild steel sliding door bolts 250mm long, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts, two on staple plate and fixed complete all as specified and directed.

S&F 100mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed

S&F MS ordinary rat tail rod pattern spring 300mm including roller and roller plate on wooden/steel chowkhats including welding, riveting etc complete all as specified and directed.

S&F 200mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and directed.

S&F 125mm Cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specified and directed

S&F IInd class hardwood as in small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each complete all as specified and directed.

S&F Mild steel flat iron 25x6mm as in hold fasts including all necessary cutting etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in bed block for fixing of hold fasts etc. complete all as specified and directed.

M&L for painting on new wooden or wood based surfaces of any description not other wise described over 10cm width or girth and applying two coat synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as specified and directed.

M&L for sand filling under floor including watering and consolidation complete all as specified and directed.

M&L for 100mm thick Cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base as in floors complete all as specified and directed.

M&L for machine cut Kota Stone slab flooring 20-25mm thick over and including 20mm cement screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Kota Stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 15mm thick rendering in cement mortar 1:4, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 40 mm thick Damp proof course in cement concrete type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L for Precast cement concrete hollow block masonry type 1:3:6 (using 16mm graded crushed stone aggregate exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L for Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick in CM 1:4 using liquid waterproofing compound as per manufacturer's instructions on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling flat or sloping with nails to timber frame complete all as specified and directed.

S&F 2nd class soft wood (Kail) in scantling clean sawn and fixed complete all as specified and directed.

S&F 2nd class soft wood plain fillets square rectangular or triangular in section wrought fixed with nails n exc 3 Sqcm, bull nosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed.

S&F 2nd Class soft wood plain fillets square rectangular or triangular in section clean sawn fixed with nails Sectional area exc 13 sqcm but not exc 25 sqcm complete all as specified and directed.

S&F 15 mm thick 2nd class softwood boarding planed one side with butt joint with nails in any situation complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls priming with alkali resistant primer and applying two coats of cement based paint complete all as specified and directed.

M&L for 75mm thick Cement concrete type C-1, 1:3:6 (20mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L for 100mm thick Cement concrete type C-2, 1:3:6 (40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

Machine pressed precast concrete interlocking paver block (shape as per sample in AGE B/R (P) sample room) with grey cement and pigment and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L PCC 1:2:4 type B-0 (using 20 mm garded crushed stone aggregate) as in copings including necessary form work, complete all as specified and directed.

M & L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi stranded flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC conduit medium grade of suitable size, concealed with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

Description All as per srl item No-57 here in above but for one 3 pin 5A socket outlet independent controlled by one switch complete all as specified and directed.

Description All as per srl item No-57 here in above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and directed.

Description all as per item No 57 above but for 3 pin socket outlet 15 Amps independent board with 2.5 Sqmm complete all as specified and directed.

S&F switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed.

S&F Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal 240 volt complete all as specified and directed.

S&F Switch socket combination 2 in 1, 3 pin, 15 Amp flush type universal 240 volt complete all as specified and directed..

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed.

Supply and fixing LED lamp 9 W complete all as specified and directed.

S&F decorative ultra slim linear LED 20 Watt, 4' long lighting fixture with extruded aluminium heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up three copper flexible cable from ceiling rose to fittings including connecting up and fixed on including two nos PVC square box of required size complete all as specified and directed.

S&F LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

Supply & fixing MCB, SPN (single pole neutral), AC, 240 volts, B series capacity 32 Amps 10kA and making connections complete all as specified and directed.

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified and directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm centre to centre both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

Supply and fixing Wall mounted fans complete with accessories, 230 V, 450 mm sweep complete all as specified and directed.

M&L for Laying, passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sqmm 2 core nominal cross section in service connections complete all as specified and directed.

Asian Marketing Co (BID ID -3124320)

M/S SHAH RAOUF (BID ID -3107840)