Making water supply arrangement system by laying GI pipe line from Patala Bore Well to NMUG to bore well near Sedimentation pond for NMUG to OC Mine existing structure of New Majri Sub Area of Majri Area

Amount

Providing ISI mark G.I. pipe of following class anddia. excluding GST levied by GOI & GOM in allrespect, inspection charges, transportation to stores,etc.??complete??as??per??IS-1239/2004.Note : One coupler shall be provided with eachfull length of pipe cost of which is included inrates??below.HEAVY 80??mm.??(??10.30??kg./m??)

Providing ISI mark G.I. pipe of following class anddia. excluding GST levied by GOI & GOM in allrespect, inspection charges, transportation to stores, etc. ?? complete ?? as ?? per ?? IS-1239/2004. Note : One coupler shall be provided with eachfull length of pipe cost of whichis included inrates?? below. HEAVY65?? mm. ?? (?? 8.02 ?? kg./m??)

Lowering, laying and jointing G. I. pipes andspecials of following class and diameter includingconveyance from stores to site of works, all labour,etc. complete either underground or in verticalposition, ??as ??directed ??by ?? Engineer-in-charge.HEAVY80??mm.??(??10.30??kg./m??)

Lowering, laying and jointing G. I. pipes andspecials of following class and diameter includingconveyance from stores to site of works, all labour,etc. complete either underground or in vertical position, ??as ??directed ??by ??Engineer-in-charge. HEAVY 65??mm.??(??8.02??kg./m??)

Providing and fixing C.I. double acting air valve ofapproved quality with bolts, nuts, rubber insertions etc.complete (The tail pieces, tapers etc if required will bepaid separately) :50 mm dia

Providing and fixing gun metal non- return valve ofapproved quality (screwed end) :80 mm nominal boreHorizontal

Earth work in excavation by mechanical means (Hydraulicexcavator) /manual means over areas (exceeding 30 cm indepth, 1.5 m in width as well as 10 sqm on plan) includinggetting out and disposal of excavated earth lead upto 50 mand for all lift, as directed by Engineer-in-charge. All kind of soil

Providing and laying in position cement concrete ofspecified grade excluding the cost of centering andshuttering - 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size andshape wherever required.

Painting with synthetic enamel paint of approved brand andmanufacture to give an even shade :Two or more coats on new work

Fencing with R.C.C. post placed at required distance,embedded in cement concrete blocks, every 15th post, lastbut one end post and corner post shall be strutted on bothsides and end post one side only, provided with horizontallines and two diagonals of barbed wire weighing 9.38 kgper 100 metres (minimum), between the two posts fittedand fixed with G.I. staples on wooden plugs or G.I. bindingwire tied to 6 mm bar nibs fixed while casting the post(cost of R.C.C.posts, struts, earth work and concrete to bepaid for SEPARTARE) :-Payment to be made per metre costof total length of barbed wire used.With G.I. barbed wire

fixing of post and Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.All kinds of soil or grouting in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)AS PER DIRECTION OF ENG -IN-CHARGE.

Supplying and erecting minimum Three & above star rated submersiblepump set of 5.625 KW/7.5 HP with 415 V, 50 c/s AC supply suitable for 150mm dia. borewell suitable for 110 to 510 LPM discharge at 107 to 30 m head &discharge & delivery pipe of Size-50 mmdiameter with a necessary H typeclamps as per specification No. WP-SMP

Supplying, erecting & terminating FR XLPE insulated, galvanised steelformed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. aluminiumconductor complete erected with glands & lugs, on wall/ trusses/pole or laid inprovided trench/ pipe as per specification no. CB-LT/AL

Supplying & erecting D.O.L Starter suitable for 415 V, 3 phase 50 cycles with novolt coil and overload element with necessary materials and connected to supplyup to 7.5 H.P.

Total impact of GST for the purpose of CTC

SUNIL SABALE CONSTRUCTION (BID ID -1161162)

R K Sandal (BID ID -1159869)