REPAIR/REPLACEMENT OF MISCELLANEOUS ELECTRICAL ITEMS IN VARIOUS COURTS, BRANCHES, OFFICES ETC. AT PUNJAB AND HARYANA HIGH COURT, SECTOR-1, U.T., CHANDIGARH (MTC. OF E.I. IN NRB AT CHANDIGARH)

DSR ITEM NO 1.30 Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

DSR ITEM NO 1.29 Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

DSR 1.38 Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supply & erection of PVC batten casing & caping of superior quality of size 1 inch on surface with suitable arrangements The job includes all labour & petty material required to complete the job to the entire satisfaction of the E.I.C. of the work..

Supply & Erection of 9/10 Watt, approx. 2’ Feet Long, surface mounted LED Batten type fitting to be installed on existing surface as required at site complete with connection etc. The LED Batten Fixture should be of Philips / Wipro / Bajaj / Havells / Crompton / Jaquar / Surya / Panasonic/ Trilux/ LT make only. The job includes all labour & petty material required to complete the job in entire satisfaction of Engineer-in-Charge as per complete item no.5 of DNIT.

S/E of fresh air fan high speed motor of following size with copper would 10” sweep with louver and plastic body complete with speed motor, blades, epoxy powder coated of Havells make Ventil Air DX HS/ Orient make ventilator/ Crompton make Brisk Air Neo/ Usha Crisp air/ Bajaj Supreme maxima DXI only. The cost includes the connection with adjacent light points and installed on wall with suitable arrangement by providing frame of required size made out 6mm thick water proof plywood to be installed with suitable size rag bolts, nuts after making suitable size hole in the wall if required at site to the entire satisfaction of Engineer-in-charge.

8” – 200 mm sweep

10”- 250 mm sweep

Supply & erection of wall/Cabin Fan 16” sweep oscillating type complete with blades & regulator. The fan should have 2 Nos. of pull cord switches, one for oscillation and one for speed regulation. The fan should be of Usha/ Orient/ Havells/ Bajaj/ Crompton Make only. The cost includes the connection with adjacent light points and installed on wall with suitable size rag bolts, nuts and other material required to complete the job to the entire satisfaction of Engineer-in-Charge.

DSR 9.2 Brush Less Direct Current (BLDC) Fan without Remote Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. 1400mm, service value ≥ 6.0 CM/Min/Watt, air delivery 245 CM/Min (Minimum)