SPL REPAIR TO BLDG NO P-6 MD ACCN (08 QTR) AT NVL AND PROVN OF PATHWAY WITH INTERLOCKING PAVER BLOCK ALONG USMAN ROAD UNDER GE (WEST) LUCKNOW

Amount

M&L for brick work with fly ash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 including demolition of brick work built in cement mortar including precast concrete articles complete all as specified and as directed.

M & L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius including demolition of brick work built in cement mortar including precast concrete articles complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and fair complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on brick wall or concrete surface including finishing the surface even and smooth without using extra cement including taking down cement or cement lime plaster on walls any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and as directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling including three coat of white wash finishing the surface even and fair including taking down cement or cement lime plaster on walls any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and as directed.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and as directed.

M & L for applying minimum 1mm thick wall care water proofing putty over prepared surface to achieve the surface even and smooth for painting complete all as specified and as directed.

M & L applying two or more coat Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete all as specified and as directed

Material & Labour for preparation of old plastered surfaces of finished walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed. Note- Primer and emulsion to be carried out through air less spray machine ( Mechanical means)

M & L for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

M & L for preparation of old plastered ceiling surface and applying two coats of white wash complete all as specified and as directed

Taking down steel tubing and Supply and fixing in of 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including necessary cutting and chaseing in brick wall for concealed including making good complete all as specified and as directed.

Taking down steel tubing and Supply and fixing in of 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including necessary cutting and chaseing in brick wall for concealed where required including making good complete all as specified and as directed.

Taking down steel tubing and connection incl cleaning for Refixing 15mm old steel tubing and connections in new or old positions (walls, ceiling, floor etc) including fittings (new or old serviceable) required complete all as specified and as directed.

Taking down steel tubing and connection incl cleaning for Refixing 20mm old steel tubing and connections in new or old positions (walls, ceiling, floor etc) including fittings (new or old serviceable) required complete all as specified and as directed

Demolition of sunken slab floor of WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab as follows:- (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with chemical " PIDIPROFF LW of Dr Pidilite or equivalent " as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia Pipe 450mm long at bottom of the sunken floor and wraping of bath seal tape on the pipes inserted through walls to floor area and seal it (Bath seal tape product of Dr fixit or equivalent and grouting around the inserted pipes by pouring Dr fixit bath seal or equivalent grout as directed (d) Make angle fillets by mixing sand cement and Dr fixit pidicrete URP or equivalenont all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of Dr fixit bath seal WPC or equivalent of thickness 1mm in combination of WPC and cement (1:1.5) by vol and giving upto height 15cm from top of floor level slab and allow it dry completely. (f) Fill the sanitary gaps with sealing compounds complete.

Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC as per mnufacturer instructions in sunken slab over brick bat complete all as specified and as directed

Dismantling brick tiles or terracing tiles, single layer of roofs in any thickness of treatment like mud phuska, polymeric etc complete all as specified and as directed

M & L for provn of roof treatment with polymeric water proofing membrane with PCC tiles after taking down existing treatment and removal of waste materils complete all as given below :- (a) Taking down entire existing water proofing treatment on roof and cleaning the roof slab top all as specified and directed. (b) M & L for plastering 10mm in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement. (c) Applying a coat of oil base bituminous primer @ 0.25 Iitres/sqm and allow to dry. (d) Applying a coat of hot blown bitumen grade 85/25 @ 1.20Kg/Sqm. (e) Applying and laying polymeric water proofing membrane of weight not less than 3kg/sqm. (f) Applying a tack coat of hot blown bitumen grade 85/25 @ 1.20kg/sqm. (g) M & L for cement concrete tiles 250 x 250 x 20 mm thick, machine pressed, set, jointed and pointed in neat cement slurry as in floors/terraces over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed

M&L PCC 1:2:4, type Bo using 12.50mm graded stone aggregate as in roof kerbs / benching / coving and roof padding over roof surfaces /sunken treatment etc rounded or chamfered on edges,cooping , leveling complete all as specified and as directed

M & L for provn of roof treatment with polymeric water proofing membrane after taking down existing treatment and removal of waste materils complete all as given below :- (a) Taking down entire existing water proofing treatment on roof and cleaning the roof slab top all as specified and directed. (b) M & L for plastering 10mm in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement. (c) Applying a coat of oil base bituminous primer @ 0.25 Iitres/sqm and allow to dry. (d) Applying a coat of hot blown bitumen grade 85/25 @ 1.20Kg/Sqm. (e) Applying and laying polymeric water proofing membrane of weight not less than 3kg/sqm. (f) Applying a tack coat of hot blown bitumen grade 85/25 @ 1.20kg/sqm. (g) M & L for two coats of aliuminium paint over bituminous surface all as specified and directed.

Taking down chowkhat frame with shutter (without taking out shutter from the frame) n exc 1.50 Sqm and removing from sites complete all as specified and as directed

Taking down chawkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n. exc 4 sqm each and removing from site complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length including M.S. hold fast/ lugs or SS dash fasteners complete all as specified and as directed. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length including M.S. hold fast/ lugs or SS dash fasteners complete all as specified and as directed. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S&F Factory made single extruded WPC (Wood Polymer Composite) solid both side lamination plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. complete all as specified and as directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

Supply and Fixed Providing 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER with lamination consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh (G-304) 0.36 mm nominal dia of wire and average width of aperture 1.4 mm shall be fixed with 15x15sq tube and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings complete all as specified and as directed

S&F powder coated (minimum thickness of powder coating 50 micron) anodized aluminum window shutter three track sliding type three track section having frame size Bottom with outer 92 x 45.50 x 1.50 (section code 20617), Top & side 92 x 31.75 x 1.50 (section code 20831) and aluminum section of shutter Top & bottom size 40 x 18 x 1.55 (section code 20736), interlock size 40 x 18 x 1.45 (section code 20737) side/middle size 40 x 18 x 1.55 (section code 20738) including necessary joining cleats, glazing clips, glazing clips rubber backing, anodized aluminum snap beading screw anodized aluminum fitting complete and including glazing by using 5 mm thick plain sheet glass and stainless steel wire mesh of dia 0.36 mm and aperture 1.4 mm complete all as specified and as directed. Refer drg No LZ/C-TD/151 sheet No 1/2 and 2/2. Note:- 1. Glazed shutters glass thickness not less than 5.00 mm and SS wire mesh shutter with SS wire mesh Grade 304 (SS) as approved by GE shall deemed to be included in quoted rate and No extra payment will be made separately. 2. No extra payment for variation in section will be made for section profiles of higher sizes.

S&F Powder coating Anodized aluminium frame for doors, windows, ventilators with one or more rebates using 3.0mm thick aluminium section including joining cleat for fixing etc. complete all as specified and as directed.

S&F powder coating anodized aluminium glazed ventilator ,FIXED TYPE, with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, complete all as specified and as directed

S&F powder coating anodized aluminium glazed window side hung type without sash bars, with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 01 no. 150mm long peg stays, 02 nos. 100mm long hinges type B-21, 01 no. 150mm long tower bolts and 01 no. 125mm long handles complete all as specified and as directed

S & F framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde304 complete all as specified and as directed.

S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and as directed.

Material and Labour for 4 mm thick plain sheet glass ordinary quality including glazing with putty area n.exc 0.5 sqm in each pane complete all as specified and as directed.

S & F figured glass 4.8 mm thick, ordinary quality and glazing with oil putty in squares n exe 0.5 sqm in each pane complete all as specified and as directed

S&F in repair kitchen sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes,including bedding in cement mortar on dwarf wall or including fixing cantilever brackets and connecting unions to pipe, ovel bowl size 600mm x 450 mm x 200 mm complete all as specified and as directed.

S&F in position rotational moulded polyethylene water storage tanks 500 lts capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismatling of exisitng tank float including ball valve 20 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight not less than 210 grams) complete all as specified and as directed

S&F in repair 25mm dia stainless steel curtain rod, superior quality with end brackets and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and as directed.

Taking out old plaster/loose concrete work on brick/concrete face of chazza/facia/column/beam/RCC parapet railing etc and providing 15mm to 25mm thick polymerized cement ready mix plaster of compressive strength 20.45 Mpa(28 days) of ORGANO technologies Pvt Ltd material on brick wall/concrete face of chazza/facia/column/beam etc finished even and smooth including necessary form work and scaffolding upto four storey of bldg complete all as specified and as directed

S & F stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 1.00 mm thick fixed with rawl plug and CP steel screws complete all as specified and as directed

S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and as directed.

S&F in repair vitreous china Wash basin, white, flat back type of size 550x400mm including CP waste coupling and 32mm dia waste pipe and fixing of 02 nos brackets made out of 40x40x5mm MS angle iron etc. complete all as specified and as directed.

S&F in repair Vitreous China squatting pan, 'Orissa pattern', size 580x440mm, white, with integral foot rests including PVC 'P' or 'S' trap, excluding flushing cistern and flush pipe, including connection to trap and flushing pipe etc. and making good to floor complete all as specified and as directed.

M&L for premium quality joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.16 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and dismantling of existing tiles complete all as specified and as directed.

M&L for premium quality joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.18Sqm but not exceeding 0.36 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 and dismantling of existing tiles complete all as specified and as directed.

M&L for premium quality joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0..36Sqm, in skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed or bedding layer in cement mortar 1:4 and dismantling of existing tiles complete all as specified and as directed.

M&L for joint free glazed coloured DIGITAL GLOSSY tiles, superior quality of size 300 x 450 x 7mm thick/300 x 600 x 7mm thick, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 and dismantling of existing tiles complete all as specified and as directed.

M&L Granite 18- 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed in CM 1:4 including moulding, dismantling of existing stone slabs etc complete all as specified and as directed

S&F in repair two(double) legged floor door stopper of aluminum body & tougues with hard drawer steel spring fixed in floor of 140mm complete all as specified and as directed.

S & F 150 mm MS ordinary Plate Type pattern spring including roller & roller plate complete all as specified and as directed

S & F 200mm long Stainless Steel barrel tower bolts of extruded section complete all as specified and as directed

S & F in repair kitchen cabinet &CB shutter with frane and shelves made ofFactory made single extruded WPC (Wood Polymer Composite) solid both side lamination plain flush door shutter of 25 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. Note: stainless steel butt hinges and necessary S S screws shall be paid separately

S & F 75 mm size a, stainless steel Handle fixed with screws for kitchen cabinet & below platform complete all as specified and as directed

S & F Continuous (piano) hinges of size of flap 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete all as specified and as directed

S & F Magnet Ball catches with 8mm dia steel ball, and brass body and striking plate for cup board / cabinet shutters complete all as specified and as directed

S & F 100mm size Stainless Steel handle fabricated type anodised complete all as specified and as directed.

S & F 100mm size Stainless Steel hasp and staple, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S & F stainless steel Butt hinges "medium weight" steel 100mm size complete all as specified and as directed

S & F Stainless Steel handle fabricated type 150mm long complete all as specified and as directed

S & F Stainless Steel sliding door bolt 250mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and as directed

Drilling through holes in granite stone for inserting pipes etc not exc. 25 mm dia complete all as specified and as directed

S & F in repair heavy duty CP mild steel hanging rod 20mm dia with end brackets and fixed with screw complete all as specified and as directed

S & F CI Hubless Pipes 100 mm bore single socketed in any length with rubber ring joints , fixed on walls complete all as specified and as directed.

S & F CI Hubless Pipes 100 mm bore single socketed in any length in trenches or in floors complete all as specified and as directed

S & F F CI Hubless Pipes 75 mm bore single socketed in any length with rubber ring joints , fixed on walls complete all as specified and as directed.

S & F CI Hubless Pipes 75 mm bore single socketed in any length in trenches or in floors complete all as specified and as directed.

S & F CI Hubless bends any radius 100mm size complete all as specified and as directed

S & F CI Hubless bends any radius 75 mm size complete all as specified and as directed.

S & F in repair 100 mm dia CI Nahani trap with grating including jointing to waste pipe fixed in cement concrete complete all as specified and as directed.

S & F in repair 75 mm dia CI Nahani trap with grating including jointing to waste pipe fixed in cement concrete complete all as specified and as directed.

S & F in repair 10 ltrs capacity PVC valveless syphonic double action type flushing cistern, low level white with inlet ball valve, float and handle including brackets complete all as specified and as directed.

S & F in repair for CP bib taps 15mm fancy type Chromium Plated cast copper alloy with crutch or butterfly handle complete all as specified and as directed

S & F in repairs 15mm bore, fancy type shower rose, chromium plated complete all as specified and as directed.

S & F in repairs brass CP wall mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe of 15 mm bore size complete all as specified and as directed.

S & F in repairs brass Cp kitchen sink mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe of 15 mm bore size complete all as specified and as directed.

S&F in repair Pillar taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe including all accessories complete all as specified and as directed.

S & F in repair Angle valve cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete all as specified and as directed

S & F in repair Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed

S & F in repairs Tubular Towel Rail 20mm dia. 'D' type, 600mm long of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and as directed

S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 550 mm long complete all as specified and as directed.

S & F in repair glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complete all as specified and as directed

M & L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M & L for preparation of old steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long ,including demolition of cement concrete (unreinforcde) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified and as directed

M & L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base etc.including demolition of Cement concrete (unreinforcde) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified and as directed

M & L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in with grey cement & no pigments over Screed bed or bedding layer of mortar 15 mm thick in Cement mortar 1: 4 for laying floor finishes complete all as specified and as directed.

M & L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping incl necessary form work finished even & smooth with using pigment in cement Cement concrete (unreinforced) in ground floor and paving n exc 15cm thicknes and below or above ground level complete all as specified and as directed

Demolition of cement concrete(reinforced) such as beam, roof, beams, shelves, manhole cover chajjas and similar suspended work complete all as specified and as directed

M&L RCC 1:2:4 type B1 using 20mm graded stone agg in RCC lintel, shelves, RCC Parapets and the like including necessary form work complete all as specified and as directed

M&L Mild Steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for cleaning of sewer line 100 mm , 150mm , 200mm bore pipe, of any depth, of any location, manhole of any depth, section, size between the sewer lines sewer line to septic tank/soak well/sump well by means of sewage sucking machine or by way of any other suitable means including disludging foreign material, sand, ashes, fibre, silt, grease, night soil, etc and removing the taken out sludge/material out side MD land by any means/source keeping the sewage line functional of the pipe lines, complete all as specified and as directed.

M & L for writing letters or figures for bldgs nos 6 cm height complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring(light, fan,socket or power) complete with fittings such as switches, sockets, ceiling rose,fan regulators, sketch light fittings, and making good the disturbed surface of walls and floors etc complete all as specified and as directed

Taking down carefully main switches DB's/ MCB DB's and making good the disturbed surfaces of walls complete all as specified and as directed

Taking down carefully copper/aluminium sub main wiring/ service connection including teak wood batten/ conduit and making good the disturbed surface of walls complete all as specified and as directed

M&L, Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes (with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core F.R.L.S. cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed at site for the following:-(NOTE: Switch and socket to be measured and paid for separately):- (a) One light/fan point controlled by one switch

All as per item No 97 above but one socket outlet point 5 Amp on an independent board complete all as specified and as directed.

All as per item No 97 above but one socket outlet point 5 Amp on an same board complete all as specified and as directed.

All as per item No 97 above but Call bell / buzzer point controlled by one bell push complete all as specified and as directed.

All as per item No 97 above but one light point controlled by two 2-way switches, with cable 1.5 sqmm complete all as specified and as directed.

All as item No 99 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15/20 Amp socket out let point on an independent board complete all as specified and as directed.

S & F switch piano flush button single pole one way 5 Amp 240 volt complete all as specified and as directed.

S&F switch piano flush button single pole two way, 5 Amp 240 volt complete all as specified and as directed.

Ditto as item 104 but using 15 Amps complete all as specified and as directed.

S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 230 volts complete all as specified and as directed.

S & F socket outlet flush type 5 pin 5 Amps 240 volts complete all as specified and as directed.

S & F ceiling rose surface bakelight two to three terminal complete all as specified and as directed.

S&F bell push single pole one way 5 Amp socket outlet point on an independent board complete all as specified and as directed.

S&F Call bell AC single pole 230 Volts Ding dong complete all as specified and as directed.

S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and as directed.

S&F fan regulator electronic, step up socket type, 230 volt and conection complete all as specified and as directed.

Supply and fixing in repairs LED lamp 7/9 watt, complete all as specified and as directed.

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electric connection with PVC 3 core copper flexible wire & all necessary fixing arrangements complete all as specified and as directed. Make shall be provided group-I cat as per latest approved make given by HQ CECC

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and as directed.. Make Makes shall be provided group-I cat as per latest approved make given by HQ CECC

S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and as directed. Makes shall be provided group-I cat as per latest approved make given by HQ CECC

Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED, 6000K , 105 lumens/watt including inbuilt electronic driver complete all as specified and as directed. Makes shall be provided group-I cat as per latest approved make given by HQ CECC

M&L for two single core PVC insulated FRLS cable 6 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 6.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25 mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete all as specified and as directed. Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate

M&L for two single core PVC insulated FRLS cable 4 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity FRLS cable drawn through PVC conduit 20/25mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete all as specified and as directed. Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate

S & F MCB DB TPN 4 Way (Vertical Type) double door, for mounting, MCBs, isolator, ELCBs etc factory made, confirming to IS: 13032 fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral link and 200 Amps rated bus bar , DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DBs shall be of same make as MCBs /Isolator. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way complete all as specified and as directed. The DBs shall be of IP 42 protection class.

S&F in repairs MCCB 4 Pole, 415 V, fixed type, 100 Amps with breaking capacity 16 KA complete all as specified and as directed.

S&F in replacement sheet metal enclosure for DB’s when MCB, to be used, SPN, 12 ways 240 volt with 200 Amps rated bus bar made out 1.2mm thick double door complete all as specified and as directed. Note :- MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’

S&F MCB SPN 32 to 63 Amp 240 volts 10 KA breaking capacity complete all as specified and as directed.

S&F MCB SP 10 to 32 Amp 240 volts 10 KA breaking capacity complete all as specified and as directed.

Supply and fixing modular ac box power unit with socket plug top and MCBs with a two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed.

Taking down electric meter and refixing on new board after rewiring in replacement of unservicable wire complete all as specified and as directed.

Taking down ceiling fan any type and refixing as same location after oiling , greesing, painting ,servicing and writing same MES number in black colour complete all as specified and as directed

Supply and fixing of heavy duty metal body exhaust fan single phase 230/240 volt of size 300 mm sweep including holes of suitable size grouting of nuts and bolt etc and making good to match the existing surface including louvers and making connetion with twisted copper flexible wire 23/0.076mm,complete all as specified and as directed.

Supply, laying and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sq mm 4.0 core complete all as specified and as directed.

Excavation in trenches in soft/loose soil n.exc 1.5M wide and n. exc 1.5 M depth and getting out, including framing bottom surface for laying cables complete all as specified and as directed.

Returning, filling in soil watering and ramming into layers of 25cm after laying of cable complete all as specified and as directed.

Disposal of surplus soil n.exc 50M distance from the starting point and depositing where complete all as specified and as directed.

M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) complete all as specified and as directed.

Supply & Laying sub class `B’ bricks old sizes over the HT/LT cable laid flat for protection of cable complete all as specified and as directed.

S & F pipe galvanised `light grade', 50 mm Bore dia including all fittings laid in trenches or fixed on wall complete all as specified and as directed.

M & L for cutting of exisiting roads for laying of under ground cable 0.3 x 0.3 x 0.3 and making good distrubed surface as per exisiting not exceeding 0.6 mtr deepth complete all as specified and as directed.

M & L for Earthing complete with glavanised steel earth plate elactrode 600x600x6 mm thick buried directly in ground with top edge of the plate not less 1.5 mtr deep below with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut , bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber , reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate no 5 of MES SSR Pt-I 2009 print complete all as specified and as directed.

Surface excavation nex 30 cm deep and avg 15 cm deep and getting out in soft /loose soil complete all as specified and as directed.

Removing excavted materil/soils to a distance nexc 50mtr and deposting where complete all as specified and as directed.

M & L for Hardcore of Broken stone or boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M & L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub base etc complete all as specified and as directed

M & L for 50mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floor finishing surface even and smooth without using extra cement complete all as specified and directed.

M & L for Forming Construction joint 50 mm deep x 10mm wide filled with sealing compound Grade B complete all as specified and as directed:

Providing and laying 80mm thick factory made chamfered edge cement concrete rouber moulded paver block of M-30 grade with approved colour design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed:

Spectrum Enterprises (BID ID -3108987)

M/s Sudhir Enterprises (BID ID -3101177)

M/S Reliance Construction (BID ID -3103418)

RKT ENGINEER & SONS (BID ID -3107368)

M/S S S A ASSOCIATES (BID ID -3109329)

M/S KAUSHIK CONSTRUCTION (BID ID -3108772)