REPAIRS/ MAINTENENANCE OF CI/DI/GI PIPE LINES, PUMP MOTORS AND OTHER CONNECTED ITEMS AT TB-2 AREA UNDER AGE E/M-1 AT GE (CENTRAL) KHADKI.

Amount

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for laying of pipes etc and getting out in soft / loose soil complete all as specified and as directed.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for lying of pipes etc and getting out in soft disintegrated rock/Road cuttings complete all as specified and as directed.

Removing surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers n . Exc 25 cm complete all as specified and as directed.

Repairs, renewal of pipe lines and attending emergency water supply breakdown complaints within 6 hours on telephonic intimation/SMS by arranging JCB/Excavator for excavation,breaking footpath paved with PCC blocks, PCC flooring, bituminus road etc up to 4 mtrs depth, dewatering with suitable dewatering pump, cutting and removing defective pipes, lowering the required size of pipes, valves and fittings with the help of crane and welding works if any, refilling the trench after repair with excavated soil, relaying of removed PCC blocks and matching with sorroundings etc complete including PCC work as directed at site complete all as specified and as directed. NOTE :- (1) Materials required for the repairs such as pipes, fittings, valves, Mechanical joints, PCC, PCC blocks etc will be measured and paid under relevant item. (2) Items such as Rubber gaskets,Nuts,bolts, washers and lathe work required to bring the pipe line of required size etc are to be included in the quoted rate. (3) the contractor shall provide sufficient barricades,caution tape,danger boards etc at work site to avoid any accidents at site. 4) If the contractor fails to start the work within 6 hours on receipt of telephonic intimation /SMS , Necessary recovery will be made twice the quoted rates of respective items. 5) Compensation if any due to any accident at site to be borne by the contractor.

Taking up cast iron water mains (including all fittings) 80mm bore dia of pipe with spigot and socket ends from trenches complete all as psecified and as directed.

All as per Sl Item No.6 above but size of pipe 100 mm bore.

All as per Sl Item No.6 above but size of pipe 150 mm bore.

All as per Sl Item No.6 above but size of pipe 200 mm bore.

All as per Sl Item No.6 above but size of pipe 250 mm bore.

All as per Sl Item No.6 above but size of pipe 300 mm bore.

Supply, laying, jointing and testing ductile iron pipes, K7 class with spigot and socket, suitable for push on rubber joint, with internal cement mortor lining, and external zinc and black bitumen coated pipes in any lengths conforming to IS:8329-2000 including rubber gasket & joints as per IS:9523-2000 laid in trenches/ road/ ducts/ footpath/ on wall/ on floor locations for 100 mm bore dia pipe complete all as specified and directed.

All as per Sl Item No.12 above but 150 mm bore pipes.

All as per Sl Item No.12 above 200 mm bore pipes.

All as per Sl Item No.12 above 250 mm bore pipes.

All as per Sl Item No.12 above 300 mm bore pipes.

Material and labour for cutting cast iron pipes in position for insertion of fittings, mechanical joints, replacement of pipes etc for bore of pipe 80mm dia complete all as specified and as directed.

All as per Sl Item No.17 above but 100mm bore pipes

All as per Sl Item No.17 above but 150 mm bore pipes.

All as per Sl Item No.17 above but 200mm bore pipes.

All as per Sl Item No.17 above but 250mm bore pipes.

All as per Sl Item No.17 above but 300mm bore pipes

All as per Sl Item No.17 above but 450mm bore pipes.

Supply and fix MS mechanical joint with rubber washers, mild steel screw bolts (machine made) with screwed both ends of dia as per flange hole and required length each screwed end to be fitted with washers and one hexagonal nut suitable for bore of pipe 80mm complete all as specified and as directed.

All as per Sl Item No.24 above but 100 mm size.

All as per Sl Item No.24 above but 150 mm size.

All as per Sl Item No.24 above but 200 mm size.

All as per Sl Item No.24 above but 250 mm size.

All as per Sl Item No.24 above but 300 mm size.

All as per Sl Item No.24 above but 450 mm size.

Material and labour for ductile iron fittings such as bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc.), Tee piece, single branch 'Y' junction double branch, collar etc., caps and plugs etc. as per IS: 9523-2000 of class K-7, with internal cement mortor lining, and external zinc and black bitumen coated of dia upto 150 mm bore complete all as specified and directed.

All as per Sl Item No. 31 above but of dia upto 200 to 300mm bore complete all as specified and directed

Material and labour for laying, jointing and testing MS pipe 250 mm bore, 8 mm thick externally coated with anti corrosive paint with welded joints laid in trenches in short lengths as required at site up to 4 mtr in depth including taking out defective pipes all as directed at site complete all as specified and directed.

All as per Sl Item No. 33 above but for MS pipe of 300mm dia.

Material and labour for MS fittings such as bends (any type, radius and angle), tapers any type (straight, bend, incresing, decreasing or double socket etc.), Tee piece, single branch 'Y' junction, double branch, collar, caps and plugs etc of 8mm thick externally coated with anti corrosive paint duly welding the joints internally and externally of dia upto 250 mm complete all as specified and as directed

All as per item No. 35 above but of dia upto 450 mm bore.

Material and labour for taking up worn out GI steel tubing including all fitings from trenches of 15 mm bore complete all as specified and directed.

All as per Sl Item No. 37 above but 20 mm bore pipes.

All as per Sl Item No. 37 above but 25 mm bore pipes.

All as per Sl Item No. 37 above but 40 mm to 50 mm bore pipes.

All as per Sl Item No. 37 above but 80 mm bore pipes.

All as per Sl Item No. 37 above but 100 mm bore pipes.

All as per Sl Item No. 37 above but 150 mm bore pipes.

Material and labour for laying in trenches / fixed to wall galvanised steel water tubing 15 mm bore, medium grade with and including all medium grade fittings complete all as specified and as directed.

All as per Sl Item No. 44 above but 20 mm bore pipes.

All as per Sl Item No. 44 above but 25 mm bore pipes.

All as per Sl Item No. 44 above but 40 mm bore pipes.

All as per Sl Item No. 44 above but 50 mm bore pipes.

All as per Sl Item No. 44 above but 80 mm bore pipes.

All as per Sl Item No. 44 above but 100 mm bore pipes.

All as per Sl Item No. 44 above but 150 mm bore pipes.

Supply and fix in repairs gun metal gate valve with iron wheel head, screwed both ends for iron pipes 15mm bore complete all as specified and as directed.

All as per Sl Item No. 52 above but 20 mm bore

All as per Sl Item No. 52 above but 25 mm bore

All as per Sl Item No. 52 above but 40 mm bore

All as per Sl Item No. 52 above but 50 mm bore

Supply and fix in repairs CI body non raising SS spindle sluice valve with cast iron wheel, of size 80 mm bore, class PN-1.6 with SS spindle with brass nut, gasket etc with both ends flanged confirming to IS-14846 with standard bolts hole, fixing with nuts, bolts, washers, rubber gasket etc complete in position of pipe line all as specified and directed.

All as per Sl Item No. 57 above but 100 mm bore

All as per Sl Item No. 57 above but 150 mm bore

All as per Sl Item No. 57 above but 200 mm bore

All as per Sl Item No. 57 above but 250 mm bore

All as per Sl Item No. 57 above but 300 mm bore

All as per Sl Item No. 57 above but 450 mm bore

Supply and fix in repairs cast iron air release valves with twin globe air outlet,100 mm dia flanged including fittings as required at site, making necessary modification/ arrangements and on CI / MS /DI pipeline of bore up to 450 mm dia complete all as specified and directed.

Supply and fix in replacement of extended valve operating device 1.5 mtr long with 25 mm dia GI pipe heavy grade duly welded with spindle cap and handle as per sample complete all as specified and directed by Engr-in-Charge.

Material and labour for spray painting of various pump set and old metal surface such as suction /delivery pipes, with two coats of synthetic enamel paint, marking arrows, writing letters etc including preparation of surface by rubbing and removing all dirt complete all as specified and directed.

Supply and fix in replacement of fire point of size 2.00 mtr long X1.2 mtr wide X 1.50 mtr high fabricated on angle iron 50mm x 50mm x 5mm thick with roof of PGI sheet 1.00 mm thick duly painted in postal red colour with fire extinguishers foam type and CO2 type extinguishers duly filled one each of 10 kg capacity grouted in PCC 1:3:6 using 40mm grade aggregate Platform in brick work and plastering, fire beater with handle-3 mtr long 01 No, Fire hook with handle .3 mtr long-1 No, Sand buckets 02 Each of 10 Kg capacity duly filled with river sand, water buckets 10 Ltrs-2 Nos and providing for ringing hand bell,hooks for hanging -4 Nos of bucket complete painting with two coats of postal red colour after surface preparation etc as directed at site as per existing sizes and sample complete all as specified and directed by Engr-in-Charge.

Fabrication, supply and Installation of glow sign boards of size not less than 6mtr x 1 mtr x 0.4 mtr made of ACP Panel sheet of 3mm thick with blue background over 40' x 40' square tubes with verge letters made of acryclic sheet white in colour and having LED strip only on letters and MES Logo placed on angle iron frame duly welded of size 50X50X5.00 mm thick of height not less than 2 mtr including connecting service cable weather proof 4.00 sq.mm 2 core from switch board upto 20 mtr including taking out perished sign boards of any type complete as per sample all as specified and asdirected by Engr-in-Charge. NOTE :- Sample of glow sign board to be got approved by Engr-in-charge/GE before placing the order.

Supply and fix in repairs three layered rotational moulded polyethylene water storage tanks, capacity 500 litre in white colour, ISI mark embosed on it, (cylindrical vertical with closed top) hoisted and fixed in position all as specified and as directed.

Supply and fix in repairs cast Iron swing check non return valve conforming to IS : 5312 (Part I) of 1969, both ends flanged with rubber gasket, nuts, bolts & washers of sizes 150 mm bore all as specified and as directed.

All as per Sl Item No.70 above but 100 mm bore.

Supply and fix in repairs cast Iron foot valve conforming to IS : 4038 flanged end with rubber gasket, Nuts, bolts & washers of sizes 150/200 mm bore complete all as specified and as directed.

All as item no.72 above but 100 mm bore

All as item no.72 above but 80 mm bore

Material and labour for Plain Cement Concrete, (1:5:8) type C5 block masonry over 10 cm in width, built in cement mortar (1:6) complete all as specified including demolition of un serviceable precast concrete block walling built in cement morter all as specified and as directed.

Material and labour for 10mm thick plastering in CM(1:4) on fair faces of brick work or concrete surfaces finished even and fair including taking down plaster of any description, racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour for Plain Cement Concrete, (1:3:6), type-C2 using 40mm graded stone aggregate as in foundation, filling and mass concrete including necessary form work werever required and including demolition of cement Concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, all as specified and as directed .

Material and labour for rolled mild steel framed work with ends of bars sohuldered, welded or riveted or forced into spikes, framed guard bars, ladders, framed balusters, walk ways, railings, gates, frame work of water tank, valve pit and similar work confirming to Fe.290.Gde-E-165 including painting with one coat of red oxide primer and one coat of anticorrosive black bituminous paint including dismantling mild steel work of any description not otherwise specially provided for all as specified and as directed.

Material and labour for one coat of synthetic enamel paint to old steel surfaces of any description, including preparation of surfaces, for area over 10cm in width or girth, not otherwise described as per specified colour code all as specified and as directed.

Material and labour for preparation of plastered or unplastered surfaces of wall and applying two coats of cement based paint of approved tint over a coat of primer complete all as specified and as directed.

Material and labour for Plain Cement Concrete, type B-2,(1:2:4) using 40 mm graded stone aggregate as in sub base 75 mm thick complete all as specified and as directed.

Supply and fix 80 mm thick machine pressed precast concrete rubber moulded coloured interlocking paver blocks with coloured cement and pigment any shape and size confirming to IS-15658-2006 M-40 grade laid over 50 mm thick sand cushionining all as specified and as directed.

Supply and fix in repairs hot dipped galvanised chain link fencing with zinc coating, nominal height-2400mm, pitch-50mm and wire dia 3.15 mm. with approx weight of 2.55 Kg /Sqm complete all as specified and as directed.

Material and labour for rolled mild steel work of angle iron fixed independently for fencing post and others confirming to Gde Fe 410-A including cutting to dead end length where required, notching, drilling, fitting and/or welding or connecting with bolts and nuts incl dismentling taking down unsv one complete all as specified and directed.

Material and labour for TMT steel bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends or as in horizontal bar for fixing in fencing and binding with and including mild steel wire (anealed) not less than 0.9mm dia or securingwith clips complete for support of chain link fencing including dismantling / taking down un serviceable one all as specified and as directed.

Material and labour for transporting/loading/unloading of 100 HP pump set from YPH to PCMC Pump House TB-2 by arranging necessary T&P and fixing the pump set in common base frame made of I-section grouted with PCC (1:2 :4) at PCMC pump House TB-2 including welding work and connecting suction/delivery line 150mm dia, NRV, sluice valve, Foot valve at Pump House complete all as specified and as directed . NOTE : - (a) Items such as MS pipe, foot valve, NRV,Sluice valve will be measured under relevant item of this schedule complete all as specified and as directed.

Dismantling / taking out complete pump of any type, capacity 30 HP of different models from foundation including dismantling suction and delivery pipe, connection from pump , carrying to wksp & back and repair/overhauling complete, reassemble and fixing to original position after repair/overhauling with nuts, bolts, washers, pipe connection complete including testing and commissioning all as specified and as directed. NOTE :- (i) Spares required for the repairs will be measured and paid as supply only under Sl Item No. 88 to 98 of BoQ. (ii) Small items such as gaskets, nuts, bolts, washers, screws and consumables like grease etc will be deemed to be included in the quoted rates.

Supply only ball bearing, (DE) complete all as specified and as directed.

Supply only Ball Bearing (NDE) complete all as specified and as directed.

Supply only Impeller complete all as specified and as directed.

Supply only Pump Shaft complete all as specified and as directed.

Supply only Lantern Ring complete all as specified and as directed.

Supply only Mechanical Seal complete all as specified and as directed.

Supply only Water Deflector complete all as specified and as directed.

Supply only Bush complete all as specified and as directed.

Supply only Key Impeller complete all as specified and as directed.

Supply only Gland Packing complete all as specified and as directed.

Supply only Gasket set complete all as specified and as directed.

Dismantling / taking out induction motor 15 HP to 30 HP from foundation by removing electric connections, coupling carefully and carrying to wksp & back for repairs complete, reassemble and fixing to original position after repair/overhauling with nuts, bolts, washers, pipe connection and cable connection complete including testing, commissioning and proper alignment all as specified and as directed.

Material and labour for complete rewinding of motor any type after cutting, taking out old damaged winding from stator core, cleaning of slots, providing proper insulating materials/lock strip in the slots, rewinding with existing size of super enamelled coper wire, required binding, bonding, insulation, varnishing and drying and proper testing after rewinding for the following sizes of motor capacity 15 HP to 30 HP all as specified and as directed.

Material and labour for calcium hypochlorite (65% to 70% chlorine content) calcium based granular disinfectant in 45 Kg Drum all as specified and as directed.

Material and labour for Alum ferric Gde -I all as specified and as directed.

Material and labour fro hydrated lime suitable for drinking water all as specified and as directed.

Supply and fix in replacement MCCB 250 Amps type DTH -250 having breaking capacity 36 KA 415V 3 pole complete all as directed by Engr-in-Charge.

Supply and fix in replacement MCCB 200 Amps type DTH -200 having breaking capacity 25 KA 415V 3 pole complete all as directed by Engr-in-Charge.

Supply and fix in replacement MCCB 100 Amps type DTH -100 having breaking capacity 16 KA 415V 3 pole complete all as directed by Engr-in-Charge.

Supply and fix in replacement MCCB 63 Amps type DTH -63 having breaking capacity 10 KA 415V 3 pole complete all as directed by Engr-in-Charge.

Material and labour for 10 sq.mm stranded copper conductor cable, single phase along with copper lugs including connecting from pump set to starter complete all as specified and as directed.

Material and labour for 50 sq.mm stranded copper conductor cable, single phase along with copper lugs including connecting from pump set to starter complete all as specified and as directed.

Material and labour for cleaning of RCC OH reservior 50000 gallon capacity internally by brushing walls, floors and through washing and removing all dirt, muds etc through drain out pipe complete including writing date of cleaning with white letters in black back ground of size 80 mm x 60 mm complete all as specified and directed by Engr-in-charge

Material and labour for cleaning of RCC OH reservior 20000 gallon capacity internally by brushing walls, floors and thorough washing and removing all dirt, muds etc through drain out pipe complete including writing date of cleaning with white letters in black back ground of size 80 mm x 60 mm complete all as specified and directed by Engr-in-charge

Cleaning of RCC OH service reservior 10000 gallon capacity internally by brushing walls, floors and thorough washing and removing all dirt, muds etc through drain out pipe including writing date of cleaning with white letters in black back ground of size 80 mm x 60 mm complete all as specified and directed by Engr-in-charge

Cleaning of RCC semi UG clear water sump 100,000 gallon cap internally by brushing walls, floors and through washing and removing all dirt, muds etc by pumping out or by manually complete including writing date of cleaning with white letters in black back ground of size 80 mmx60 mm complete all as specified and as directed by Engr-in-charge

Cleaning of RCC semi UG clear water sump 50,000 gallon capacity internally by brushing walls, floors and thorough washing and removing all dirt, muds etc by pumping out or by manuually complete including writing date of cleaning with white letters in black back ground of size 80 mm x 60 mm complete all as specified and directed by Engr-in-charge

Cleaning of RCC semi UG clear water sump 20,000 gallon capacity internally by brushing walls, floors and thorough washing and removing all dirt, muds etc by pumping out or by manuually complete including writing date of cleaning with white letters in black back ground of size 80 mm x 60 mm complete all as specified and directed by Engr-in-charge

Chemical testing of water sample at PMC or at any govt recognised water testing lab for the following parameters: Turbidity, pH, total hardness, Alkalinity, Chloride, Nitrate, TDS, Iron, Flourides, calcium, Magnesium, Aluminium, Sulphide, Lead, Arsenic, Manganese, Copper, Mercury, residual chlorine NOTE :- (i) Sample of water to be collected from pump houses in sterilised bottle provided by the lab (ii) Sample of water to be deposited to lab and report to be collected duly signed by authorised person of Lab. (iii) Cost of transportation of water sample and collection of report shall be inclusive of quoted rate. (iv) Cost of testing as specified shall be paid to lab directly by the Contractor and the cost shall be inclusive of quoted rate. (v) Testing shall be carried out in scheduled time, otherwise recovery shall be effected thrice the quoted rate. (vi) Complete parameter testing shall be considered as one job.

Sunhari Electricals

SKS Electricals

ONKAR ELECTRIC AND GENERAL STORE