Commissioning of 4 Nos. 6.6 kV Single Circuit Overhead distribution line on turnkey basis at Amrapali OCP Including opeation Maintenance of 05 Years

Amount

A. WORK & SERVICES

a.) Detailed survey of the area, within the battery limits & submission of reports (Complete work as per Tender document) b.) Sub soil exploration, field and laboratory testing of samples & submission of reports (Complete work as per Tender document)

B. DESIGN & ENGINEERING COST

a). Preparation and submission of system engineering drawings as per system requirements b). GA & detail engineering designs and drawings of all major items included in the system and scope of works (Complete details of the system) c). G.A. & detailed engineering designs and drawings including working and maintenance manuals of equipment (Complete details of the system) : i) all individual equipment ii) Earthing system & Lightening protection system iii) Any other system/unit to match the scope of work & requirement iv). Documentation as per tender specification, complete as per scope of works

C. SUPPLY OF SUPPORT STRUCTURES FOR OVERHEAD LINES

Rail Pole 13 Mtr. Long. 52 (min.) kg/mtrs as per specification- Required Nos.- Lot (Total Amount for all poles shall be quoted)

D. SUPPLY OF POLE STRUCTURES AND OTHER EQUIPMENT

Pre-fabricated Hot dip Galvanised steel items like V cross arm, top clamp, DC cross arm, bracket, clamps, cross bracings, bracings, strain,plate, guarding channels, back clamp, etc made of MS Channels , MS angle (65x65x6mm), MS flats of given sizes for over head structures as per technical specification, tender drawings and scope of work- Lot

MS Nuts, Bolts with Washers as per technical specification, tender drawings and scope of work i). GI Nuts, Bolts & Washer of required sizes- Lot ii). Hot dip Galvanised Eye Screw Bolt of required sizes- Lot

Stay Set (Galvanised) with stay clamp, stay insulator , anchor plate (Dimensions as per specification), nut bolts, turn-buckles, solid GS stay rod (Dimensions as per specification) & GI stranded wire (Dimensions as per specification) complete as per technical specification, approved drawings and scope of work.- Lot

Insulator and hardware as per technical specification, tender drawings and scope of work. i). 11 KV Porcelain Disc insulator 45 KN along with suitable hardware fittings- Lot ii). 11 KV Porcelain Pin Insulators with GI PIN- Lot

Earthing and Lightning arrangement as per technical specificatons, tender drawings and scope of work- Lot

ACSR conductor, Dog type (100 sq mm)-Lot

Miscellaneous Equipment comprising of the follwing : i. PG Clamps as per requirement - Lot ii. Barbed Wire- Lot iii. Danger Plate (Enamelled with Clamp)- Lot iv. Phase Indication Plates for each phase set of 3 (On H-Pole & 4 Pole) - Lot

E. ERECTION, INSTALLATION & COMMISSIONING

Erection of electrical and other equipment

Commissioning of the Overhead line

F . OTHERS ITEM

Any other item left out for completion of the project

G . OPERATION,MAINTENANCE AND TRAINING

Operation and Maintenance of the Overhead Line for five year after commissiong

Training of the employer personnel as per tender document

Total impact of GST for the purpose of CTC