CERTAIN MISC B/R REPAIRS TO JCOS/OR MD ACCN AT MIL STN PATIALA UNDER GE (SOUTH) PATIALA

Amount

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Dismantling floor hearth wall tilling incl Cement Motar (bedding but not backing), rubbish off the premises, complete all as specified and directed

M&L for anti-skid premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern light shade tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 15 mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

Providing and Laying Premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with flexural strength greater than 16 N/mm2, scratch hardness on Moh’s Scale minimum 3 and crazing resistance of 2 cycles in coloured tiles 450 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in any thickness (below or above ground level), complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 12.5 mm graded crushed stone aggregate 25mm thick as in bedding layer under floor tiles etc complete all as specified and directed.

S&F Framed work such as grills,Gates, cooler stands gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Demolition of cement concrete reinforced RCC Tank and similar suspended work incl removing debries obtained from demolition to a distance exc 250m but n.exc 500m and deposting where directed at a level n.exc 1.50m above the starting point complete all as specified and as directed.

Dismantling old unserviceable cement concrete/PVC water tanks of any description, capacity exc 250 and not exc 500 litres and including provision of PVC Water Storage Tank 500 ltr Capacity HDPE Double Layered ,Cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet Pipe connection including locking arrangement, Ball Valves high pressure of PTMT with Epoxy coated Aluminium Rod & high density plastic ball screwed for iron Pipe 20mm dia and (Min Weight 20mm-210gms) complete all as specified and as directed. Note (i) inlet ,out let & wash out pipe will be measured and paid separately. (ii) Other acceessories including in the unit quoted rate.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions complete all as specified and directed.

Taking down eaves gutters and rain water pipes (AC Rain water pipe/SWG pipe line) of any size or pattern including all fittings etc complete all as specified and as directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 110 mm bore of pipe etc complete all as specified and as directed.

M&L for PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and as directed.

M&L for PVC (SWR) bends any radius of 110 mm bore with access door including jointing complete all as specified and as directed.

Taking up or down 15 mm bore steel water tubing and connections complete all as specified and directed.

Supplying and laying of CPVC pipes 25mm outer dia SDR 11 and plain CPVC SDR 11 fitting on walls/ ceiling or laying in floors complete all as specified and directed.

Taking up or down 20mm bore steel water tubing and connections complete all as specified and directed.

Supplying and laying of CPVC pipes 32mm outer dia SDR 11 and plain CPVC SDR 11 fitting on walls/ ceiling or laying in floors complete all as specified and directed.

M&L for stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle chromium plated screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe fixed in repair complete all as specified and as directed.

M&L for stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle chromium plated screwed both ends for iron pipe or for unions for 20 mm bore dia of pipe fixed in repair complete all as specified and as directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in Cement Motar 1:4 finished fair and even with out using extra cement complete all as specified and as directed

M&L for preparation of newly plastered surface of wall and applying two coats of cement based paint over a coat cement base primer complete all as specified and as directed.

M&L for PVC waste pipe 32mm dia plain of standard length/size suibable for WHB and steel sink fixed in repair complete all as specified and as directed.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position complete all as specified and as directed.

S&F in repair for Mild steel 300 mm ordinary rat tail rod pattern spring incl roller and roller plate complete all as specified and as directed.

S&F in repair for 15mm bore bib tap, CP fancy type, screwed down high pressure complete all as specified and as directed.

S&F in repair for PVC low level flushing cistern 10 litre capacity, ISI marked, white complete all as specified and as directed.

S&F in repair for Vitreous china squating pan orissa pattern size 580mm x 440mm, white, with integral foot rests (excluding flushing cisten and flush pipe) complete all as specified and as directed.

S&F in repair for Vitreous china wash down water closet pan pedestal pattern , white, (excludingfixing bolts, flushing cisten and flush pipe) complete all as specified and as directed.

S&F for PVC connection 450mm long ,15mm size with PTMT nuts fixed in repair complete all as specified and as directed.

S&F for PVC connection 600mm long ,15mm size with PTMT nuts fixed in repair complete all as specified and as directed.

S&F in repair for PTMT standard bib tap 15mm bore dia, any colours, screwed for iron pipe . (Minimum weight 90gms) complete all as specified and as directed.

S&F in repair for Stop cock high pressure of PTMT of size 15mm bore any colour, (minimum weight 90gm) complete all as specified and as directed.

S&F in repair for 15mm bore dia PTMT Nipple suitable for HDPE water tank.( min wt. 38gm) complete all as specified and as directed.

S&F in repair for 20mm bore dia PTMT Nipple suitable for HDPE water tank.( min wt. 45gm) complete all as specified and as directed.

S&F in repair for PTMT waste coupling, 32mm dia bore suitable for steel sink complete all as specified and as directed.

S&F for CP towel rail 60cm long with brass screw and cleats fixed in repair complete all as specified and as directed.

S&F in repair for Toilet paper holder stainless steel with steel screw complete all as specified and as directed.

S&F in repair for PVC seat cover (for EWC / Anglo Indian type WC) complete all as specified and as directed.

S&F in repair for Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and as directed.

S&F in repair for Mild steel butt hinges medium weight,cold rolled, ISI marked, 100mm long complete all as specified and as directed.

S&F in repair for Mild steel butt hinges medium weight,cold rolled, ISI marked, 75mm long complete all as specified and as directed.

S&F in repair for Mild steel butt hinges medium weight,cold rolled, ISI marked, 50mm long complete all as specified and as directed.

S&F in repair for Mild steel sliding door bolts,plate type, stove enamelled black, ISI marked, 300mm long, with bright bolt not less than 16mm dia including nut, bolts and screws complete all as specified and as directed.

S&F in repair for Mild steel pressed handles,oval type, ISI marked, 150mm long stove enamelled black including screws complete all as specified and as directed.

S&F in repair for Mild steel pressed handles, oval type, ISI marked, 100mm long stove enamelled black including screws complete all as specified and as directed.

S&F in repair for Mild steel barrel tower bolt, 150mm long, ISI marked, stove enamelled black, with bright bolt including screws complete all as specified and as directed.

S&F in repair for Mild steel barrel tower bolt, 200mm long, ISI marked, stove enamelled black, with bright bolt including screws complete all as specified and as directed.

S&F for Aluminium alloy, anodised, sliding door bolt, 300mm long, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia including fixing bolts and nuts fixed in repair complete all as specified and as directed.

S&F in repair for Aluminum anodized, barrel tower bolts of extruded section 200mm long, ISI marked including fixing steel screws complete all as specified and as directed.

M&L for Aluminum anodized, barrel tower bolts of extruded section 150mm long, ISI marked including fixing steel screws.fixed in repair complete all as specified and as directed.

S&F in repair for Aluminum bow handles, cast type, anodized 100mm long, ISI marked, including fixing steel screws complete all as specified and as directed.

S&F in repair for Aluminum bow handles, cast type, anodized 150mm long, ISI marked, including fixing steel screws complete all as specified and as directed.

S&F in repair for Floor door stopper 75 mm size of aluminium alloy body and tongue, anodized with hard drawn steel spring, overall length of cover plate 140 mm, ISI marked complete all as specified and as directed.

S&F for PTMT grating doom, 125/140 mm dia (minimum weight 40gms) .fixed in repair complete all as specified and as directed.

S&F for Continuous (piano) hinge, mild steel, bright finish, ISI marked, (width of fllap 40mm when open) .fixed in repair complete all as specified and as directed.

S&F in repair for 15mm dia, pillar tap, cast copper alloy with capstan head, , chromium plated,high pressured with or without lettered "Hot" or "cold complete all as specified and as directed.

S&F in repair for Brass chromium plated mixer for WHB for mixing hot and cold water screwed down high for 15mm bore pipe or union complete all as specified and as directed.

M&L for Galvanised steel wire cloth 0.56mm nominal dia of wire and average width of apertutre 1.18mm fixed in repair complete all as specified and as directed.

S&F in repair for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated guard and railing 60cm long complete all as specified and as directed.

S&F for PTMT grating round 125 mm size.fixed in repair complete all as specified and as directed.

M&L for Glass 4 mm thick pin head of required size as directed. fixed in repair complete all as specified and as directed.

M&L for Sheet glass 4 mm thick, ordinary quality, in square not exceeding 0.5 Square metre each pane, fixed and repair complete all as specified and as directed.

S&F in repair for Vitreous china wash hand basin , white, flat back, of size 550x400mm complete all as specified and as directed.

S&F in repair for Sink with drainage board made of stainless steel 1.0mm thick with plug washer and waste PVC pipe overall size 915x460mm bowl size 410x330x160mm complete all as specified and as directed.

S&F -15 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed.

S&F 12 mm thick LEAD FREE PVC Celuka ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.

S&F 5 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards in repair complete as per manufacturer’s instructions complete all as specified and directed.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position complete all as specified and directed.

S&F in repair for CP shower rose fancy type, revolving type, suitable for 15 mm bore GI pipe, complete all as specified and direced.

Taking down shutter of any discription exc 1 sq. m and n exc 2 sq. m all as specified and directed.

M&LTaking down chowkhats or frames ( with or without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F Solid PVC door frame of size 50x47 made of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in open as per speificiation complete all as specified and directed.

S&F Factory made solid pvc moulded door shutter 28 to 30 mm thick (stiles ) with 2,4,6, raised panel design with 2mm thick sheet on front face and 2 mm plain colour pvc sheet on back face supplying and fixing in frame at site as specified and directed.

Dismantling old unserviceable cement concrete/PVC water tanks of any description, capacity exc 500 and not exc 1000 litres and including provision of PVC Water Storage Tank 1000 ltr Capacity HDPE Double Layered ,Cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet Pipe connection including locking arrangement, Ball Valves high pressure of PTMT with Epoxy coated Aluminium Rod & high density plastic ball screwed for iron Pipe 20mm dia and (Min Weight 20mm-210gms) complete all as specified and as directed. Note (i) inlet ,out let & wash out pipe will be measured and paid separately. (ii) Other acceessories including in the unit quoted rate.

M&L for Steel rack for kitchen 600mm x 600mm of weight not less than 7 Kg each fixed in repair all as specified and directed.

M&L for CP Jet Spray suitable for EWC including 1.50 meter long flexible tube, fixed in repair all as specified and directed.

AR CONSTRUCTIONS

DELTA CONSTRUCTION CO

FAVOURITE ENGINEERS

M/s Rakesh Singla

HARJIT CONTRACTS

ANIL KUMAR AND CO

AGGARWAL & CO

SWAMI ENGINEERS