Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹53.7 LAccepted-AOC PO PS RUPA DIST WEST KAMENG ARUNACHAL PRADESH PIN 790 003 | WEST KAMENG | ARUNACHAL PRADESH | 790003 | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹55.4 L+₹1.7 L (3.18%)Rejected-Finance P O P S THRIZINO WEST KAMENG A P PIN 790 002 | WEST KAMENG | ARUNACHAL PRADESH | 790002 | L2 | Rejected-Finance HIGH BID VALUE | |
| 3 | Rejected-Technical | - | Rejected-Technical DOES NOT HAVE APPROPRIATE CATEGORY, HENCE NOT RECOMMENDED FOR OPENING. |
Tender Value
₹53 L
EMD Value
₹1.0 L
Closing Date
25 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COL GANESH ZAPE
HQ CWE TENGA PIN- 900194 C/O 99 APO
PROVISION / REROUTING OF EXTERNAL HT/LT UG CABLES AND ALLIED WORK IN PHASE-I (RUPA) AND PHASE-III (DAHUNG) UNDER GE 859 EWS
2022_MES_570264_1
8331/E8
Open Tender
Civil Works
Item Rate
180 days
GE 859 EWS
C b(ii)
8 documents required · 8 mandatory
₹1,000
GE 859 EWS
₹1.0 L
Yes
24 Feb 2023
20 Dec 2022
2 Feb 2023
20 Dec 2022
25 Jan 2023
11 Jan 2023
Amount
Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation of poles/laying of under ground cables etc and getting out in hard/dense soil complete all as specified and as directed.
All as per Item No. 1 above but depth exceeding 1.5 m and not exceeding 3 m complete all as specified and as directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and as directed.
Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.
M&L for PCC (1:4:8) type D2 using 40mm graded aggregate as in foundation for filling in, mass concrete for pole, stay, pole base and transformer foundation complete all as specified and directed.
M&L for PCC (1:3:6) type C1 using 20mm graded aggregate as in mass filling of pole including necessary form work complete all as specified and directed.
M&L for PCC (1:2:4) type B-1 using 20mm graded aggregate as in coping of new pole , top surface of plinth etc, including necessary form work complete all as specified and directed
Supply and spreading clean dry river sand in trenches for cushioning of UG cables complete all as specified and directed.
Supply and laying in replacement un-reinforced precast concerete cable cover, class HV, type 1 flat size 300mm x180mm x 40mm for cable protection complete all as specified and directed.
S&F in trenches or fixed to pole or passing trough pipe XLPE insulated, screened, PVC bedded, galvanised steel strip armoured, overall PVC sheathed electric power cables (heavy duty) with aluminium conductor, 11000 volts grade (Earthed) cross sectional area 95 Sqmm 3 core complete all as specified and directed. Make of Cable : Havells / Polycab / Finolex / Grandlay
S&F Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and directed. Make - Denson / Raychem / M-Seal / MS-Seal
S&F Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm complete all as specified and directed. Make - Denson / Raychem / M-Seal / MS-Seal
M&L for steel tubular swaged pole complete with cast iron base plate , finial taper plug bolts nuts and screws confirming to IS : 2713 and made out of structural steel tube confirming to IS: 1161 and painted internally with a coat of bituminous paint and externally one primer coat, one under coat and one finishing coat of aluminium paint as specified type 410 SP-55 (11 mtr long) complete all as specified and directed. Make - National Tubing Company / Kwality Steel Kolkata / Calcutta Poles / Bansal Poles / Jindal Poles
S&F Switch Air break, gang operated, triple pole, mechanically operated mounted on 12 insulators of size 150mm dia and 150 mm height and steel frame with operating mechanism worked from ground level for current rating upto 200 Amps, 11000 Volts with locking arrangement incl drop out fuse upto 25 Amp complete all as specified and directed. Make - Jaipuria / Pactil / ALPRO / OBLUM / Jayshree
S&F GI tubing 100mm bore medium grade for cable protection on pole / trench complete all as specified and directed.
S&F Cross arms including replacement of bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed.
S&F of lightning arrestor, expulsion type, distribution class, System voltage-12KV, min rating-10KV, Discharge cap-65 KA, Line discharge class-1 complete with bracket and connection complete all as specified and directed. Areva / OBLUM / Rashtriya / Raychem / ALPRO
S&F Danger notice plate of 1.6mm thick mild steel sheet , vitreous enamelled white , with letters , figure and conventional skull and bone in signal red colour and fixed with MS clamps , bolts and nuts of approved size for HT, 25x20cm size complete all as specified & directed .
M&L for Stay assy using 20mm dia rod & 300mm x 300mm x 6mm plate size complete with accessories as shown in electrical plate No 1 complete all as specified and directed (loop type insulators, clamps, excavation, PCC measured separately)
S&F Loop type insulator, porcelian vitreous white, brown or green of size 90x140mm and clearence hole 25.5mm complete all as specified and directed.
S&F for galvanised stay strand of size 7/4 mm including complete all as specified and directed.
S&F ACSR conductor incl jointing with existing conductor and stringing on pole and proper fastening to insulators with aluminium binding wires and required jumpering connection complete all as specified and directed.
S&F Disc type insulator porcelain, vitrous 145mm high and 255 mm dia ball and socket type white, brown or green double disc with tension clamp for conductor for working pressure voltage 11000 V complete all as specified and directed.
S&F pin type, porcelain, vitreous, brown, including one galvanised mild steel spindle, two galvanised iron washer and one galvanised iron nut, 150mm dia and 150 mm height for 11000 volts grade complete all as specified and directed.
Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 70 Sqmm 3.5 core with required aluminium cable lugs all as specified and directed. Make of Cable : Havells / Polycab / Finolex / Grandlay
All as per Item No. 25 here in before but of size 50 Sqmm 3.5 Core bore, complete all as specified and as directed.
M&L for Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised iron earth strip 32x6mm upto test point with suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including light grade GI watering pipe 20mm bore with funnel wire mesh and medium grade GI wire protection pipe 40mm bore up to main board completew as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete ass as specified and testing on completion complete ass as specified and directed by Engineer-in-charge. Note - The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 20mm GI pipe (light grade) for watering 40mm GI protection pipe (medium grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.
M/S KUNKAPU ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .