Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.9 LAccepted-AOC 407 4TH FLOOR FORTUNE SQUARE MOROD MAPUSA GOA | MAPUSA | GOA | ₹10.9 L | L1 | Accepted-AOC L1 |
| 2 | Rejected-Technical GOA | - | - | Rejected-Technical Technically not qualifed |
Tender Value
₹10.4 L
EMD Value
₹20,844
Closing Date
2 Feb 2026, 5:00 pmClosed
Chief Officer
MMC, Mapusa
Repair and upgradation of public toilet at Amurliwada in Ward No. 18 of MMC.
2026_MC_27339_1
22/MMC/Engg/286(2)/2025-26
Open Tender
Civil Works
120 days
Mapusa
Please refer Tender documents.
2 documents required · 2 mandatory
₹5,000
₹20,844
17 Apr 2026
20 Jan 2026
4 Feb 2026
20 Jan 2026
2 Feb 2026
20 Jan 2026
Demolishing brick work in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.
Demolishing R.C.C. work including stacking of steel bars & disposal of unserviceable within 50 mts. lead.
Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.
Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : (a) All kinds of soil.
Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. (a) All kinds of soil.
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete. (b) Moorum.
Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: (a) All works upto plinth level.
Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size).
(a) All works upto plinth level.
(c) In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level.
Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.
Centering & shuttering including Strutting, Propping & removal of forms for :
(i) Foundations, Footings, Bases for columns.
(iii) Columns, Piers, Pillars, Aburments, Posts and struts (square rectangle polygon in plan).
(xiii) Suspended floors, roofs landings, shelves & their supports.
(iv) Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth.
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Providing and fixing Colouron Plus galvulium roofing Sheets of 0.5mm thick double ribbed trapezoidal profile coated 1080mm with cover width of 1020mm including all the accessories (JSW or equivalent make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge.
Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge.
Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.
Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.
Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level.
Brick work using common burnt building bricks in cement mortar 1:3 (1 cement : 3 coarse sand) with bricks of class designation 75 kg/ cm2 (wire cut bricks) (b) In superstructure upto floor five level.
6mm cement plaster to ceiling 1: 4 (1 cement : 4 fine sand).
12mm cement plaster 1:4 (1 cement : 4 fine sand).
Neat cement punning.
18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.
Providing and fixing vitrified antiskid tiles (320x320) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete.
Providing and fixing coloured ceramic tiles spartek or equivalent of 8" x 4" size and 6 mm thick in skirting and dados on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with cement slurry complete.
Fixing standard steel or aluminum glazed doors windows and ventilators in wall with lugs 10 cm x 16mm x 3.15 mm embed in C.C. block 15 x 10 x 10 cm size of 1:3:6 (1 cement : 3 coarse sand, 6 aggregate 20 mm nominal size) or with wooden plugs or with rawl plugs & screws or with fixing clips or with nuts as required including fixing of glass panes with glazing clips and special metal sash pulley of approved make or metal bearing with screws shall be supplied by department free of cost.
Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Single or double leaf door shutters. (a) Acrylic sheet.
Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete.
Making soak pit. 2.5 m dia 3 m deep with 45x45 cm dry brick honey comb shaft and S.W. drain pipe 100 mm diameter, 1.8 m long complete filled with laterite stone aggregate 125 to 180 mm surrounded by laterite stone aggregate of 40 mm and down gauge as per standard design.
Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996. c) 1000 lit. capacity.
Providing and fixing white vitereous china pedestal type (Europen type) water closet with seat as lid, whth C.I. brass hinges and rubber fitings 15 lts white vitreous china low level flushing cistern with fittings as brackets 40 mm white precelain 3enameled flush bad, 25 mm overflow pipe with specials and mosquito proof coupling of approved municipal design complete, including cutting and making good the walls and floors where required. (a) W.C. pan with white plastic seat and lid.
Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. a) Flat back wash basin size 630 x 450mm with a pair of 15 mm C.P. brass pillar taps.
Providing and fixing in position 32 mm diameter glavanised steel telescopic flush pipe complete including and cutting and making good the walls and floors.
Providing & fixing liquid soap container with C. P. brass lid and brackets fixed to wooden cleats with C. P. brass screws. (b) Plastic container.
Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:
a) 110 mm dia
b) 75 mm dia
Providing and fixing rigid PVC bend (approved make) for S.W.R. pipes including lubricating etc complete bend with door : (a) 100 mm dia.
Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door : (a) 110 mm dia.
Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : (a) 110 mm dia.
Providing and fixing U.P.V.C. pipe clips (approved make ) for S.W.R. pipes: (a) 110 mm dia.
Providing and fixing R.P.V.C. vent cowl: (b) 75 mm dia.
Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers.
Providing and fixing brass bib cock (heavy) of approved quality : (a) 15 mm nominal bore.
Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. (a) 15 mm dia nominal outer dia pipes.
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes confirming to IS: 15778 having thermal stability for hot and cold water supply includng all CPVC plain and brass threaded fittings CPVC solvent cement, trenching, refilling and testing of joints complete as per firectionof the Engineer in charge.(External work (heavy duty SDR 11 pipe). (b) 20 mm nominal outer dia pipes.
Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1: 1 1/2:3 mix (1 cement: 1 1/2 coarse sand ;3 graded stone aggregate 20mm nominal size foundation concrete 1:1 1/2:3 mix (1 cemet ;1 1/2 coarse sand :8 graded stone agrregate 20mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. (d) Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg).
Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.
Applying one coat of cement primer of approved brand and manufacture on wall surface.
Providing and fixing bright finished brass tower bolts (barrel type) with screws etc. complete. (a) 250x10 mm.
Providing and fixing bright finished brass handles with necessary screws etc complete. (a) 125 mm.
Providing and fixing bright finished brass door latch with necessary screws etc complete. (a) 300x 16 x 5 mm.
Providing and applying on a well prepared vertical surface Sonoshield HLM 5000 of BASF make or equivalent one-component,moisture-curing, bitumen-modified polyurethane elastomeric waterproofing membrane for exterior below-grade or between-slab applications. The product shall be applied in minimum two coats to achieve total DFT of 1.25 mm. The materials shall be mixed and applied fully in accordance with the manufacturer's instructions. This material has got very high Elongation Almost >600%. All scaffolding, ladders, supporting materials etc. complete. Rates shall be inclusive of all labour, materials, tools and plant etc. complete.
Transportation and carriage of materials by tipper truck including loading, unloading and stacking (i) Lime , moorum , building rubbish.
Transportation and carriage of materials by tipper truck including loading, unloading and stacking (ii) Earth.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
technical_27778.pdf
techsummary_27778.pdf
finance_27778.pdf
BOQ Comparative Chart
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.45 MB
BOQ_27778.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid