AR TO RB TYPE 6 SECTOR 7 CHANDIGARH

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement :4 coarse sand)

Providing and fixing golden champ jaffery on compound wall with frame of golden champ section 2” x 1.3/8” as horizontal member and vertical members fixed with golden champ and strips 4”x 3/8” @ 6” c/c on both faces sides faces of jaffery. The top of jaffery is to be covered with another strip of 2 x 1.3/8”. The complete panel is to fixed over existing wall and M.S. angle with iron nuts and bolts etc. The complete jaffery is to be painted with special quality over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-charge.

Providing and fixing 6mm thick polycarbonate multi wall sheet to be fixed on existing M.S. frame with Aluminum rivets complete in all respect to the entire satisfaction of Engineer-in-charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixingin position and applying a priming coat of approved steel primer all complete.

Providing and laying Vitrified tiles in floor indifferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 15:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the jointswith white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of size Size ofTile 600 x 600 mm

Providing and laying Vitrified tiles in floor indifferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 15:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the jointswith white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Dismantling of ceramic tiles or vitrified and plaster to making the surface clean for refixing the glazed tiles including removing of malba complete in all respect and to the entire satisfaction of the Engineer in charge.

Providing and fixing 8mm thick wooden laminated floor class of use 31/23 having wear resistance level of AC-3 as per EN-13329 with a direct pressure laminate surface including profile, treated with aluminium side, flooring of approved colour and shade complete in all respects and to the entire satisfaction of the Engineer in charge.

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from naturalsources)

Providing and laying 40mm thick factory made cement concrete rubber moulded interlocking paver block made with ratio 1:1:2 by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 30mm thick compacted bed of course sand, filling the joints with fine sand etc all complete as per direction of Engineer-in-charge.

Providing and fixing wooden cabinet of 13½” deep and 2’-0" height with open able shutter at wall above 4’-9" height consisting of 19mm thick with commercial board (ISI marked) lipped with teak wood lipping of 19mm x 6mm on exposed edges include cost of nail, screws, auto hinges, synthetic adhesive etc. The front shutter and sides are to be furnished with 1mm thick ISI marked superior quality mica of approved shade and inner side of the cabinet with 0.8mm thick mica of approved shade fixed in position with help of wooden gutties at wall complete in al respect to the entire satisfaction of Engineer in charge.

Providing and fixing of kitchen cabinet below working shelves made out with 19mm thick commercial ISI marked plyboard and front portion of the cabinet furnished with 1mm thick superior quality sun mica of outer side and 0.8mm thick sun mica inner side of the cabinet for fixing the kitchen accessories and jack at bottom synthetic enamel paint over remaining portion. It is also include the cost of sprit polishing on the edge of the lipping cost of stainless steel handle, adhesive, nail, screws etc. complete fixed in position to the entire satisfaction of Engineer-in-Charge.

Providing and fixing heavy duty S.S. kitchen Basket of size 21” x 20” x 4” accessories fixing in the existing cabinet with help of best quality telescopic channel.

Providing and fixing heavy duty S.S. kitchen Basket of size 21” x 20” x 6” accessories fixing in the existing cabinet with help of best quality telescopic channel.

Providing and fixing heavy duty S.S. kitchen Basket of size 21” x 20” x 8” accessories fixing in the existing cabinet with help of best quality telescopic channel.

Providing and fixing heavy duty S.S. kitchen cutlery basket of size 17” x 20” x 4” accessories fixing in the existing cabinet with help of best quality telescopic channel.

Providing and fixing heavy duty S.S. kitchen basket of size 17” X 20” x 4” accessories fixing in the existing cabinet with help of best quality telescopic channel.

Providing and fixing heavy duty S.S. kitchen basket of size 17”x 20” x 6” accessories fixing in the existing cabinet with help of best quality telescopic channel.

Providing and fixing heavy duty S.S. kitchen basket of size 17”x 20” x 8” accessories fixing in the existing cabinet with help of best quality telescopic channel.

Providing and fixing heavy duty S.S. kitchen plate basket 17” x 20” x 8” accessories fixing in the existing cabinet with help of best quality telescopic channel.

Providing and fixing heavy duty S.S. kitchen grain trolley of size 21” x 20” accessories fixing in the existing cabinet with help of best quality telescopic channel.

Providing and fixing heavy duty S.S. kitchen masala pull out 8" accessories fixing in the existing cabinet with help of best quality telescopic channel.

Providing and fixing heavy duty S.S. kitchen masala pull out 6" accessories fixing in the existing cabinet with help of best quality telescopic channel.

Providing and fixing heavy duty S.S. kitchen basket 17"x 20"x 6" accessories fixing in the existing cabinet with help of best quality telescopic channel.

Providing and fixing heavy duty S.S. kitchen Vegetable basket 17"x 20"x 6" accessories fixing in the existing cabinet with help of best quality telescopic channel.

Providing and fixing heavy duty S.S. kitchen thali basket 17"x 20"x 8" accessories fixing in the existing cabinet with help of best quality telescopic channel as approved complete in all respect and to the entire satisfaction of Engineer in Charge.

Providing and fixing heavy duty S.S. kitchen corner basket 21" deep accessories fixing in the existing cabinet with help of best quality telescopic channel.

Providing and fixing heavy duty S.S. kitchen hydraulic auto hinges accessories i.e. hydraulic auto hinges fixing in the existing cabinet complete in all respects and to the entire satisfaction of the Engineer in charge

Providing and fixing heavy duty telescopic channel for drawers 18" to be fixed with necessary screws complete in all respects and to the entire satisfaction of the Engineer in charge.

Providing and fixing bottle pull out 200mm, soft close, 2 shelf stain finish to be fixed in the existing cabinet with superior quality as approved complete in all respect and to the entire satisfaction of Engineer-in Charge

Providing and fixing heavy duty S.S. kitchen Cup Saucer of size 17”x 20” x 8” accessories fixing in the existing cabinet with help of best quality telescopic channel.

Wall painting with prernium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound )content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.One coats

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Finishing walls with Acrylic Smooth exterior paint of required shade Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying cement based putty (Birla, Jk or equivalent) to the required finish complete in all respect and to the entire satisfaction of Engineer-in-charge.

French spirit polishing : One or more coats on old work

Provding and installation of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by the Engineer in charge) 0.50mm +-5% total coated thickness TCT) thick zinc coating 100gsm as per IS 277 in 240mpa steel grade, 5-4 microns epopxy primer on both sides of the sheet and polyester top coat of 15-18 microns. Sheet should have protective guard film of 25 micron minimum to avoid scratches while transportation and should be supplied in single length upto 12 metres or as desired by the Engineer in charge. The sheet shall be fixed by using self drilling / self tapping screws of size (5.5x55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with whitel ead complete upto any pitch in horizontal / vertical or curved surface excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete in all repsects and to the entire satisfaction of the Engineer in charge.

Please Enable Macros to View BoQ information