REPAIRS TO JOINERY (WOODEN/ ALUMINIMUM), CUPBOARD, GUARD BARS, RAILING OF AREA III OF AGE B/R (CENTRAL), GE (WEST) COLABA, MUMBAI.

Amount

Taking down door chowkhat with shutter without taking off shutter from the frame area nexc 1.5 Sqm each all as specified & directed.

Taking down chowkhats or frames with shutters without taking off shutter from the frame area exc 1.5 Sqm but not exc 4 Sqm each all as specified & directed.

Taking down shutters of any description area nexc 1 sqm each all as specified & directed.

Taking down shutters of any description area exc 1 sqm but n exc 2 sqm each all as specified & directed.

Refixing shutters of any description area not exc 1 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws all as specified & directed.

Refixing shutters of any description area exc 1 Sqm but not exc 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws all as specified & directed.

Taking down kitchen cup board/cup board of any type including fitting and fixture all as specified & directed.

S&F in repairs 18 mm thick Both Side pre laminated MDF Board of any colour, acrylic surface finish, grade I as per IS 14587, for frame and shutter for cup boards with PVC lipping all around of shutter all as specified and directed.

S&F continues (piano) hinges, mild steel, bright finish width of flap (when open) 30mm all as specified and directed.

S&F magnetic catches with steel body ‘H’ type, fixed to shutter all as specified and directed.

S&F 100 mm handles long, anodised aluminium aloy, fixed with screw all as specified and directed.

Taking down Stone slabs and tiles of any description or thickness in floors, aprons all as specified & directed.

M&L in repairs machine cut cudappa stone slab 20-25 mm thick, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed

S&F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 62 mm x 32 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length all as specified and directed

S&F factory made 28-30 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as specified and directed

S&F 18 mm thick Both Side pre laminated HDHMR Board of any colour, matt surface finish, grade I as per IS 14587, for frame and shutter with 18 mm wide PVC strips lipping for kitchen cabinets complete including dismentling any type board all as specified and directed by Engr-in-charge.

S&F 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints all as specified & directed.

M&L mild steel framed work such as grill, gates, guard bar, framed with welding using angle iron, square bars and round bars section including cutting, welding, revetting all as specified & directed.

S&F factory made 30 mm thick flush shutter solid core construction with block board core & plywood face panels commercial type on both sides including 5mm thick teakwood leaping alround all as specified & directed.

S&F 2nd class hardwood factory made door, 35 mm thick, glazed and skeleton shutters, open rebated and prepated to receive glass gauze (with sash bars) edges of framing plain, chamfered or rounded materials and revated sash bars any number, edges of framing plain chemfered or rounded fitted with cut and mitred beads for securing glass in door etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (a) all as specified & directed.

S&F 2nd class hardwood glazed and skeleton window shutter 30mm thick, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, to receive glass, gauze, etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (b) all as specified & directed.

Cutting holes in brick walls built in cement or cement lime mortar for inserting hold fasts, etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 cutting exceeding half brick but not exceeding one brick all as specified & directed.

S&F mild steel bends strips, hold fast or small articles of FI or angle all as specified & directed.

S&F for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple all as specified & directed.

S&F in repairs galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple all as specified & directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads all as specified & directed.

M&L 3mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 sqm in each pane all as specified & directed.

M&L 3mm thick sheet glass Figured glass, pin head type and glazing with oil putty in square nexc 0.5 sqm in each pane all as specified & directed.

M&L 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane all as specified & directed.

S&F 300mm long aluminnium alloy sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including minimum of 6 bolts and nuts, four on bolt plate and two on staple all as specified & directed.

S&F MS butt hinges cold rolled medium weight of size 100mm all as specified & directed.

S&F MS butt hinges cold rolled medium weight of size 75 mm all as specified & directed.

M&L Mild steel plain black sheet 1.25 mm thick in hearths; covering to door shutters; ducts, etc, cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets, fixed to wood or steel members with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, etc as required all as specified & directed.

M&L for applying two coats of synthetic enamel paint on new steel surfaces not exc 10 cm width or girth including preparation of surface all as specified and directed.

M&L for preparing wooden new surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified & directed.

M&L for preparing wooden old surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint all as specified & directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and shown in drg in SSR Part -II 2010

S&F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS, frame shall be covered with heat moulded plain cover PVC C channel having a PVC sheet strip of 20mm with struck in side with solvent cement for styles and plain colour PVC sheet for top rail lock rail and bottom rail and either side as gap inserted for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading sheet and jointed together with solvent cement in frame at site as per specification and shown in drg in SSR Part -II 2010

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section all as specified and directed

S&F 100 mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge pin anodized all as specified & directed.

S&F 150 mm long aluminium alloy handle cast type anodized all as specified & directed.

M&L Granite 18-20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite flooring including 15 mm thick screed bedding in cement mortar 1: 6 and all other similar works all as specified and directed.

S&F powder coated aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame all as specified & directed. Note : (i) Glass panes will be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. (iv) Windows all around will be sealed with silicon sealant.

S&F framed work such as grills, gratings, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified & directed.

S&F curtain rod side brackets for stainless steel rods of approved quality all as specified & directed.

S&F in repairs 20 mm dia stainless steel tube with fixing brackets and all other connected works all as specified and directed.

S&F in repairs aluminium grill of 6 mm thick bars of opening as per design DG No 103 of fixed with aluminium channel 'F ' fixed in position with screw all as specified and directed.

S&F in repairs Aluminium composite panel sheet 3mm thick PVCF wooden finished fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required silicon & screw as in ceiling/coloumns and in vertical surface all as specified and directed.

S&F in repairs anti rusting stainless unik cloth drying hanger made of 16 mm dia hollow stainless rod, 8 feet x 4 rods set for heavy duty including fixing on ceiling with metal roof clamps all as specified and directed.

MAHABIR INDUSTRIAL PRODUCTS (INDIA)

SHRI SAI ENTERPRISES

SAHU AND SAHU CO.

GANGAJAL

D.S. Construction

M K ENTERPRISES

HINDUSTAN BUILDERS

Unitech Enterprises

sri construction

SRI SAIRAM COUNSTRUCTION

Bidder Name

Unitech Enterprises

HINDUSTAN BUILDERS

RAMESH ENTERPRISES

SRI SAIRAM COUNSTRUCTION

SAHU AND SAHU CO.

SHRI SAI ENTERPRISES

D.S. Construction

GANGAJAL

sri construction

M K ENTERPRISES

MAHABIR INDUSTRIAL PRODUCTS (INDIA)