Provn of Aluminium Partition and Sliding Doors for certain Wards Depts, Offices and waiting area of Offrs, JCOs OR for Comd Hosp (NC) and Augmentation of Raw Water Supply at Nuddle Khud Pumphouse Distribution area under GE (Utilities) Udhampur.

Amount

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars , etc, but excluding ashlar facings, dressed stone-work and precast concrete articles, complete all as specified and directed by Engr-in-Charge.

Demolition of concrete (reinforced) of any description like beams,slabs etc in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engr-in-Charge.

Taking down chowkat with shutters (without taking off shutters from the frame) exc. 1.5 sqm but not exc 4 sqm each and making good jamps to match with finished surface, complete all as specified and directed by Engr-in-Charge.

Supply & fixing collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., erected in position and securing runners with holdfasts and brackets, complete all as specified and directed by Engr-in-Charge.

Supply & fixing framed work such as grills, gratings ,etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walkways railings framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed by Engr-in-Charge.

Material & labour for preparation of new or previously untreated steel or iron surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer over 10cm width or girth, complete all as specified and directed by Engr-in-Charge.

Supply & fixing powder coated Anodised aluminium frame for sliding doors, windows ventilators, partitions with one or more rebates including joining cleat for fixing etc, complete all as specified and directed by Engr-in-Charge. Note: ACP board and glasses shall be measured and paid for separately.

Supply & fixing powder coated Anodised aluminium door shutters sliding or hinged, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified and directed by Engr-in-Charge. Note: ACP board and glasses shall be measured and paid for separately.

Supply & fixing steel rolling shutters 1.25mm thick without ball bearing of gear operated type with bevel gear box and crank handle as specified, including top cover, anchoring rod, hasp & staple and one shop coat of primer; erected in position as indicated, complete all as specified and directed by Engr-in-Charge.

Supply and fixing, plain ACP board 5 mm thick,fixed in aluminium joinery including cutting, packing, finishing, complete all as specified and directed by Engr-in-Charge.

Material & labour for sheet glass 5.5mm thick, ordinary quality and fixed with aluminium & rubber beading in square n exc 0.5 sq m in each pane, complete all as specified and directed by Engr-in-Charge.

Material & labour for sheet glass 5.5mm thick, ordinary quality and fixed with aluminium & rubber beading in square n exc 0.5 sq m in each pane but frosted one side, complete all as specified and directed by Engr-in-Charge.

Supply & fixing pre-painted coloured galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,straight or curved in plan fixed with self tapping screws, complete all as specified and directed by Engr-in-Charge.

Supply & fixing mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters straight or curved, fixed with angle cleats or other connecting plates, quality confirming to Fe-410W (Gde E-250 Quality A), complete all as specified and directed by Engr-in-Charge.

Material & labour for brickwork with old size sub class `B’ bricks, in straight or curved on plan, exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.

Material & labour for rendering 15 mm thick on other than fair faces of brick work in cement mortar 1:4, finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.

Material & labour for 20mm thick granite tiles (any type) of approved size, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing, laid over & including 20 mm thick in cement mortar 1:4 including rounding the edges, in flooring, complete all as specified and directed by Engr-in-Charge.

Material & labour for 20mm thick granite tiles (any type) of approved size, machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing, laid over & including15 mm thick rendering in cement mortar 1:4 including rounding the edges, complete all as specified and directed by Engr-in-Charge.

Material & labour for hard core of gauge exc 63mm but n-exc 100 mm, deposited, spread and levelled in layers n-exc 15 cm thick, watered and rolled/rammed to a true surface, complete all as specified and directed by Engr-in-Charge.

Material & labour for plain cement concrete, 100 mm thick, type B-2, 1:2:4 (using 40mm graded crushed stone aggregate), complete all as specified and directed by Engr-in-Charge.

Supply & fixing waste coupling 32 mm bore of PTMT (half or full threaded), complete all as specified and directed by Engr-in-Charge.

Supply & fixing cast iron floor trap, 100 mm, with grating including jointing to waste pipe and fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed by Engr-in-Charge.

Material & labour for 25mm thick plain cement concrete 1:2:4, type B-0, (using 12.5 mm graded crushed stone aggregate) finished the surface rough to receive tiling, complete all as specified and directed by Engr-in-Charge.

Material & labour for Non-Skid white ceramic tiles, 7 to 8mm thick (square/rectangular as approved) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement laid over and including 10 mm thick screed in cement mortar 1:4 as in floor, complete all as specified and directed by Engr-in-Charge.

S & F for sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed by Engr-in-Charge.

Supply & fixing pillar tap of 15mm dia bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, 'Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe ISI marked, complete all as specified and directed by Engr-in-Charge.

Material & labour for 15mm dia bore `medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors including necessary cuttings/chases and making good as required, complete all as specified and directed by Engr-in-Charge.

Material & labour for 20mm bore `medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors including necessary cuttings/chases and making good as required, complete all as specified and directed by Engr-in-Charge.

Supply & fixing 75mm bore `spun pipes` cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed by Engr-in-Charge.

Supply, Installed, commissioning and testing of Centrifugal Horizontal Split casing Pumpset capacity 50 HP for raw water handling at Nuddle Khud Pump house. Pump Duty: 1620 LPM at 80 Meter Head with bronze impeller casing CI, minimum 80% efficiency coupled to Driver rating: 37kw/50HP, 1475RPM Three Phase IE3 TEFC Squirrel cage induction Motor only as per manufacturer design with all standard fixing coupled through flexible copling to be connected with suction and delivery side with common base (ISI marked) on delivery side with common base frame of MS variable, complete all as specified and directed by Engr-in-Charge.

Supply, Installed, commissioning and testing of Cast Iron Horizontal Multistage Pumpset capacity 40 HP for raw water handling at Golf view Pump house. Pump Duty: 1200 LPM at effective head of 36 mtr with bronze impeller casing CI, minimum 80% efficiency coupled to Driver rating: 30 KW/40 HP, 3 ph, 415 Volts, 50Hz, 1475 RPM Three phase IE3 TEFC Squirrel cage induction Motor as per manufacturer design with all standard fixing coupled through flexible copling to be connected with suction and delivery side with common base (ISI marked) on delivery side with common base frame of MS variable, complete all as specified and directed by Engr-in-Charge

Supply & Fix Fully automatic soft star delta motor starter in MN 65 with single phase protection feature motor rating AC 3 phase 415 volts, 50 Hz for motor of capacity 50 HP, complete all as specified and directed by Engr-in-Charge Make-Havells/L&T/IndoAsian

S&F PVC insulated heavy duty industrial cables single core copper conductor(flexible) PVC insulated cable 1100 volt nominal area of conductor 35 sqmm, complete all as specified and directed by Engr-in-Charge.

M&L for copper thimble suitable for 35 Sqmm single core copper cable, complete all as specified and directed by Engr-in-Charge.

M/S MAHALUXMI BUILDERS (BID ID -3411588)