REPAIR TO PLUMBING SANITARTY FITTINGS AND CLEANING OF PVC WATER TANKS WITH CERTAIN OTHER WORKS IN AREA I UNDER GE KAMPTEE

Amount

Cleaning and removing for Exc 250 ltr & Not Exc 500 ltrs water tank all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed.

Cleaning and removing for Exc 500 ltr & Not Exc 1000 ltrs water tank all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed.

Cleaning and removing for Exc 1000 ltr & Not Exc 2000 ltrs water tank all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed.

S&F in repair for 15mm float Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F in repair for 20mm float Ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F in repair for 25mm float Ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks (four layers, cylindrical vertical with closed top) 500ltr hoisted and fixed in position including dismantling complete all as specified in SSR Part I complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks (four layers, cylindrical vertical with closed top) 1000ltr hoisted and fixed in position including dismantling complete all as specified in SSR Part I complete all as specified and directed.

Writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high (writing the date as "TANK CLEANED ON 10 MAY 2022" white or black thick synthetic enamel paint )complete all as specified and directed

S&F PVC water tank cover suitable for existing tank any size complete all as specified and directed.

M&L for Grouting in RCC wall/floor/roof through PVC nipples at a spacing of 45 to 60cm C/C including drilling injection points to a depth of 75-100mm, providing 10mm dia PVC nipples and pressure grouting using with and including cement mixed with plasticizing admixture like FOSROC / Dr fixit or as directed (model CEBEX100) or PIDILTE (model 207 PIDICRET 8AM) @ 225gms/50kg of cement to fill up all capillaries/voids/honeycombing, nozzles to be sealed with the sealing with pressure of 2 to 4 Kg/sqcm and continued till refusal. After instructions complete all as specified and directed. Note-After ascertaining the location of leakage/seepage/dampness under relevant item shall be operated of the required location.

Dismantling floor hearth or wall tiling including cement mortar bedding and disposal of rubbish outside of MD land complete all as specified and directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors/wall etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors/wall etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

All as item No 14 above but as in skirting/dado etc with 10mm backing in cement mortar 1:4 complete all as specified and directed.

M&L coloured/printed glazed ceramic tiles 300x450x6 to 7mm thick, in floors/walls skirting/dado etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and directed.

M&L light shade vitrified ceramic tiles 10mm thick (square/rectangular ) polished area each tiles n.exc 0.36 Sqm in floor/wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed of cement mortar (1:6) complete all as specified and directed.

All as item No 17 above but as in skirting/dado etc with 10mm backing in cement mortar 1:4 complete all as specified and directed.

S&F in repair PVC valve less symphonic action type flushing cistern 10ltr capacity low level, white/coloured with inlet ball valve float and handle including bracket(incl. Taking down old cistern ) and fixing of PVC flush pipe 32 mm dia and PVC connection pipes complete all as specified and directed.

Supply & fixed in repairs Wash Hand basin ( flat back or angle back )of size 550 X 400 MM white including , waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe complete all as specified and directed.

S&F pillar cock swan neck 15 mm bore brass CP screwed for iron pipe including taking down existing one complete all as specified and directed. Prayag cat No 7814

S & F in repairs chromium plated shower square (200mm x 200mm) rose with or without swivel joints incl shower arm as approved complete all as specified and directed.

S&F in repair Stop valves/angle cock, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions and fixed fancy type chromium plated complete all as specified and directed.

S&F in repair two way angle /bib cock , cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions and fixed fancy type chromium plated complete all as specified and directed.

S&F in repair 15mm bore concealed stop valves fancy type chromium plated cast copper alloy pressure with crutch or butter fly handles screwed both ends with long shank and cup (concealed type)for iron pipe or for union all as specified and directed

S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flanges chromium plated complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs 3mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane in each pane including taking down old broken glasses complete all as specified.

S&F in repairs 3mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane including taking down old broken glasses complete all as specified.

S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F in repair stainless steel Kitchen plate racks size 24x30x10 inch complete all as specified and directed.

S&F in repairs PVC(SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall with necessary clamps complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall with necessary clamps complete all as specified and directed.

S&F in repair PVC (SWR) Bends any radius for 110 mm bore complete all as specified and directed

S&F in repair PVC (SWR) Bends any radius for 75 mm bore complete all as specified and directed

S&F in repair PVC (SWR) branch piece single Y equal or unequal for 110 mm bore complete all as specified and directed

S&F in repair PVC (SWR) branch piece single Y equal or unequal for 75 mm bore complete all as specified and directed

S&F in repair PVC (SWR) branch piece, double Y equal or unequal for 110 dia bore complete all as specified and directed

S&F in repair PVC (SWR) branch piece, double Y equal or unequal for 75 dia bore complete all as specified and directed

S&F GI tubing 15 mm bore medium grade with all fittings and fixed to wall with clamps including taking up or down existing GI tubing and cutting/chasing in wall complete all as specified and as directed.

S&F GI tubing 20 mm bore medium grade with all fittings and fixed to wall with clamps including taking up or down existing GI tubing and cutting/chasing in wall complete all as specified and as directed.

S&F GI tubing 25 mm bore medium grade with all fittings and fixed to wall with clamps including taking up or down existing GI tubing and cutting/chasing in wall complete all as specified and as directed.

Demolition of reed lathing, single or double including battens and plaster or chicken wire lathing, RCC jali complete all as specified and as directed.

S&F precast cement concrete type B0 1:2:4 (12.5 mm graded aggregate) louvers and jallies 35 mm thick (measured solid) including all mouldings but excluding frame and fixed complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out Soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed.

Removing excavated material (soil) not exc 50m and deposited where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

Demolition and breaking up of 150mm dia drain pipes (salt glazed ware, AC or RCC Pipes) set in cement mortar complete all as specified and directed.

Demolition and breaking up of 200mm dia drain pipes (salt glazed ware, AC or RCC Pipes) set in cement mortar complete all as specified and directed.

Demolition and breaking up of 300mm dia drain pipes (salt glazed ware, AC or RCC Pipes) set in cement mortar complete all as specified and directed.

M&L for concrete bed in PCC 1:3:6 type C2 (using 40mm graded stone aggregated) to drain pipes including packing under and haunching against the sides of the pipes after laying & testing for any dia of pipes complete all as specified and directed.

M&L for reinforced concrete pipes, class NP2, laid and jointed complete with collar for the 300mm internal dia of pipes complete all as specified and directed.

M&L for reinforced concrete pipes, class NP2, laid and jointed complete with collar for the 450mm internal dia of pipes complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping benching, bed plates and the similar including, weathering, slightly rounded or chamfered edges and throating complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

Demolition of reinforced cement concrete any description not exc 15 cm thick complete all as specified and directed.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in coping including weathering throating and necessary formwork complete all as specified and directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and directed.

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M & L for brick work with flyash brick, straight or curved on plan to any radius built in half brick thick wall built in cm 1:4 (Using old size brick) complete all as specified and directed.

Taking down cement or cement plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and disposal of rubbish outside of MD land complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:6 on brick work or concrete surfaces including finished fair and even complete all as specified and directed.

M & L for rendering 15 mm thick in cm 1:4 on brick or concrete surfaces even & fair smooth, using water proofing liquid compound and without using extra cement complete all as specified and directed. Note: water proofing liquid will be measured and paid separately.

M&L for preparing new plastered surfaces and applying three coats White wash all as specified and directed

M&L for preparing new plastered surfaces and applying two coats of OBD over a coat of primer and two coats of wall care putty etc complete all as specified and directed

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed.

Demolition of reinforced cement concrete any description and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish off the premises complete all as specified and directed.

M&L for precast RCC 1:2:4 type B1 using 20mm stone aggregate as in landings, cover slabs, for manholes etc and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed.

S&F for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking out existing unserviceable wooden wardrobe including chowkhat of overall size 1000mm x 1900mm approx from existing position of married & single accn including supply & fixing steel wardrobe including chowkhat of same size at the same position in Md and single accn all as directed to ensure proper & smooth functioning of wardrobe to the entire satisfaction of Engr-in-Charge. The overall outer size of chowkhat will be 1000mm X 1900 mm approx, made with 0.5mm thick plain black MS sheets and overall shutter size of wardrobe 945mm X 1845mm (approximate) having 2 shutter, 06 Nos of 75mm long, medium weight, MS butt hinges and one number approved quality chromium plated MS handle & one number MS lock of approved quality CP of Godrej pattern with key in duplicate. Thickness of all MS sheets to be used in wardrobe for any purposes including chowkhat, shutter, bracing and back etc except shelves shall be of 0.5mm thick and 02 numbers shelves of size 1.00 x 0.5m approx made of 1mm MS sheet shall be fixed suitably and properly with rivet / welds for storing clothes etc in wardrobe. 01 No MS approved pattern tie hanger shall be fixed in one shutter. One number MS peg set of three shall be fixed in other shutter of wardrobe. 18mm dia MS conduit pipe chromium plated with suitable & approved quality bracket will be fixed to both gable wall of wardrobe. Suitable pattern MS sheets bracing to shelves and shutters shall be provided to avoid any sagging and other related problem in smooth functioning and proper use of wardrobe. All cement plaster, brick wall, PCC, RCC etc disturbed during dismantling of wardrobe shall be made good in cement motar 1:3 properly as per site condition and technical requirement all as directed by Engr-in-Charge. In the bottom portion of wardrobe (of size 1.0 x 0.60m approx) 7mm thick glazed tile exc 0.06 sqm and not exc 0.11 sqm of approved colour and shade shall be laid over and including screed bed of 15mm thick in CM 1:6 including filling the joint with matching colour of tiles. In the sides (of size 0.58 x 1.88m approx each) and back portion of wardrobe (of size 1.0 x 1.88 m approx) 350x450x7mm thick glazed tile of approved colour and shade shall be fixed over and including backing coat of 10mm thick in CM 1:4 including filling the joint with matching colour of tiles. Inside surface of ceiling of wardrobe (of size 1.00x0.60m approx) shall be finished with two coats of OBD over a coat of birla white wall care putty after making good surface properly. Chowkhat will be fixed with suitable rawl plug with and CP steel screw inside wall etc & adjacent surfaces shall be made good to match with adjacent finishing surfaces properly as required and directed for entire completion of work. All steel surface will be painted with two coats of synthetic enamel paint with approved shade and colour by spray painting over one coat of red oxide primer including preparation of surfaces. All other misc work will also be carried out for entire completion and smooth functioning complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 44,835.00]

DIVESH HARISH SIRIAH

M/s Jagdish Staioners and General Stores

Bidder Name

M/s Jagdish Staioners and General Stores

NORTH INDIA PEST CONTROL

DIVESH HARISH SIRIAH