Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.6 LAccepted-AOC 2ND 6 KEDIA HOUSE MA ROAD BYELANE 1 REHABARI GUWAHATI ASSAM 781008 | KAMRUP METRO | ASSAM | 781008 | L1 | Accepted-AOC AOC Awarded | |
| 2 | L2₹41.0 L+₹84,751 (2.11%)Rejected-Finance | L2 | Rejected-Finance Other than lowest quoted tenderer | |
| 3 | L3₹41.9 L+₹1.7 L (4.27%)Rejected-Finance 2 LOCKHART ROAD NEAR PCDA P OFFICE PRAYAGRAJ U P PIN 211014 | PRAYAGRAJ | UTTAR PRADESH | 211014 | L3 | Rejected-Finance Other than lowest quoted tenderer | |
| 4 | L4₹43.5 L+₹3.3 L (8.17%)Rejected-Finance AT PO DERA COLLIERY TALCHER DIST ANGUL ODISHA PIN 759103 | ANUGUL | ODISHA | 759103 | L4 | Rejected-Finance Other than lowest quoted tenderer | |
| 5 | L5₹43.5 L+₹3.4 L (8.34%)Rejected-Finance | L5 | Rejected-Finance Other than lowest quoted tenderer |
Tender Value
Refer Docs
EMD Value
₹97,000
Closing Date
11 May 2022, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST ALLAHABAD
GE WEST ALLAHABAD NEW CANTT ALLAHABAD
SPL REPAIR OF BLDG NO T-74 (OR LINES), ADDN/ALTN TO BLDG NO P-35 AND OTHER CONNECTED WORKS AT NEW CANTT ALLAHABAD
2022_MES_518149_1
8543/E8
Open Tender
Civil Works
Item Rate
180 days
NEW CANTT ALLAHABAD
Please refer tender docuements
7 documents required · 7 mandatory
₹500
GE WEST ALLAHABAD
₹97,000
Yes
30 Jun 2022
13 Apr 2022
13 May 2022
13 Apr 2022
11 May 2022
27 Apr 2022
60 days
Amount
Surface dressing n.exc 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches n. exc 1.5 m width and n. exc 1.5 m in depth for foundation etc or for shafts, wells,cesspits , manholes , pier holes etc n exc 10 sqm on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and as directed.
Returning filling in ,including spreading ,levelling,watering and well ramming in layers n exc 25 cm soft/ loose soil complete all as specified and as directed.
Removing excavated material exc 250 m but n exc 500 m distance and depositing as directed.
M&L for hardcore of gauge n exc. 63 mm,of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor complete all as specified and as directed
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed .
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in slabs supported on walls, roof beams etc and the like, complete all as specified and directed.
M & L for Providing precast cement concrete Type B0 1:2:4 (12.5mm graded aggregate)Set in cement mortar 1:6 louvres and jallies, 25mm thick (measured solid), including all mould- ings complete all as specified and directed.
M&L for brickwork with fly ash bricks (old size), straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed
M & L for half brick work with Fly ash Bricks (old size) straight or curved on any radius built in CM 1:4 complete all as specified and directed.
Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for firnished surfaces, complete all as specified and as directed
Use and waste of form work formwork to sides of pillars, posts, struts, piers, columns and stanchions with rough finished surface complete all as specified and as directed
Use and waste of form work form work to sides and soffit of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc for rougth finished complete all as specified and as directed
Use and waste of form work form work to soffits of suspended slabs such as roof slab etc. n.exc. 200mm thick for fair finished surfaces of concrete complete all as specified and directed.
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm for fair furnished surfaces.
S&F TMT bars of 10mm dia and over in reinforcement cut to length bent to shape required including cranking bending and binding with mild steel annealed wire not less than 0.90 mm dia or securing with clips and as straight in groves complete all as specified and directed.
M&L for Mild steel bars (TMT bars) 5mm dia and over upto and including 10mm dia in strriups,spaces,nibs and binders complete all as specified and as directed.
M&L for 5 mm thick rendering in CM 1:3 on ceiling surface plaster complete all as specified and as directed.
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work finished even and fair without using extra cement complete all as specified and as directed
M&L for 75 mm thick cement concrete 1:3:6 type B-2 using 20 mm graded stone aggregate in plinth protection finished even and fair without using extra cement including necessary formwork and cutting of joints complete all as specified.
M & L for first or premium quality coloured Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed joint free in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L for steel work in tubular trusses, purlins, rafter,tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade ST-240 complete all as specified and directed.
M & L for Finishing walls with Acrylic Smooth exterior paint of required shade over and including priming coat of exterior primer with paint sprayers.
S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.
M&L for preparation of newly steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint with paint sprayers over a coat of red oxide primer, complete all as specified and directed.
M&L for 18 to 20 mm thick Granite work (table rubbed and polished) as in vertical surface on wall, column or similar works over 12 mm thick cement mortar (1:3) backing plaster including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.
M&L 17/18mm thick prelaminated medium density fibre board (MDF) (one side decoratve and other side balancing white), exterior grade as in cup board shutters/ shelves and cabinets etc., fixed with screw/ nails alround complete all as specified and directed.
S&F 30mm width of flaps continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified.
S&F 100 mm hasp & staple safety type of aluminium anodised including bolt to hinges plate and fixed with screws complete all as specified and directed.
S&F 100mm size stainless steel handle cast type polished bright complete all as specified and directed.
S&F magnetic catches with steel body ‘H’ type fixed to shutter complete all as specified and directed
S & F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc as in brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for preparation of newly plaster surface of wall and applying two coats of oil bound distemper over a coat of primer with paint sprayers complete all as specified and directed.
M&L for preparation of old surface of wall by scrapping machine tools/electric hand grinder with wire brush and applying one coat of oil bound distemper with paint sprayer complete all as specified and as directed.
Demolition of cement concrete in ground floors and pavings not exc.15 cm thick (above or below ground level ) unreinforced.
M&L 30 mm thick PCC 1:2:4 type B-1 using 20 mm graded aggregates as in base of floor complete as all spfd and directed.
Dismantling stone slabs or tiles of any description or thickness in floors etc laid bedded & pointed in any mortar complete all as specified & as directed
M&L machine cut kota stone slab flooring 18-20 mm thick including 15 mm thick cement screed bed jointed with grey cement slurry mixed with pigment to match the shade of the slab inclung rubbing & polishing complete all as specified & directed.
Dismantling of floor hearth or wall tling including cement mortar bedding (but not backing), removing servicesable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for first or premium quality Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer of cement (1:4) complete as all spfd and directed by EIC
M&L for first or premium quality glazed ceramic designer tiles (minimum size 300x450x6 to 8 mm thick) coloured tiles on vertical surfaces as in skirting , dado etc set & jointed in neat cement slurry and pointed with white cement mixed with colour pigment to match the colour of tiles over 15 mm thick rendering in CM(1:4) on brick work or concrete surface on wall and finished the even and fair to receive tiles complete all as specified and directed.
M&L for PCC type B-1 (1:2:4) using 20 mm graded stone aggregate as in coping and side packing of paver block complete as all spfd and directed.
Demolition of brickwork masonary built in lime or cement mortar including all quions arches ,pillars etc. but excluding concrete articles.
Taking down cement plaster/terrazzo/tiles etc on brick wall or stone wall etc, including raking out joints hacking for key, scrubbing down with water etc complete as well as spfd. and as directed .
M&L for rendering 15 mm thick in CM(1:4) on fair faces of brick work or concrete surfaces to be finished even & fair without using extra cement with WPC complete as all spfd and directed.(Note : WPC to be measured & paid seperately under appropriate item)
M&L for preparation of new plastered surface and applying two coat of Oil emulsion distemper over a coat of white primer on wall with paint sprayers complete as all specified and directed by EIC
M&L for preparation/complete removal of existing treatment wall by scraping machine tools/electric hand grinder with wire brush and applying two coats of oil bounds distemper over a coat of primer with paint sprayer complete all as specified and as directed.
M&L for preparation of new plastered surface of wall and applying two coat of cement based paint white or tinted over a coat of primer with paint sprayers complete all as specified and directed.
M&L for preparation/complete removal of existing tratment wall by scraping machine tools/electric has grinder with wire brush and applying two coats of cement base paint over a coat of primer with paint sprayer comlete all as specified and as directed.
M&L for preparing old plastered decorated surface by scrapping machine tools/electric hand grinder with wire brush and applying two coats of exterior emulsion paint with paint sprayer complete all as specified and as directed.
Taking down chowkhats or frames with shutters(without taking off shutters from the frame) not exc. 1.5 sqm each complete as all spfd and directed.
Taking down chowkhats or frames with shutters(without taking off shutters from the frame) area exc.1.5 sqm each not exc. 4.00 sqm each complete as all spfd and directed.
S&F Rolled mild steel Framed work as in doors or gates hollow section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe410-0 or Fe 310-O
S&F 32 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as spfd and directed.
S&F 35 mm th second class HW glazed and skelton shutters open rebeted prepared to received glass,gauze, etc. (with sash bar) divided in squre with plain chamfered or rounded mitred rebeted sash bar any No for securing glass,gauze etc,size of members of shutters as specified in SSR part -1 section 8 clause 8.24 (a) fitted to chowkhats.
S&F MS work such as holdfast ,staple,clamps,etc and similar small article etc conforming to Fe-290-0 grade -Fe-165 complete all as specified and directed.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete, all as specified and directed.
M&L for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paints over and including a coat of pink primer with paint sprayers all as specified and directd.
S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete as all spfd and directed.
S&F 100 mm butt hinges, medium weight, cold rolled mild steel, and fixed complete as all spfd and directed.
S&F 150 mm aluminium handles, cast type, anodised complete all asspecified and directed.
S&F 200 mm aluminium anodized, barrlel tower bolts of extruded section complete all as specifed and directed.
S&F 300 mm long aluminium anodized, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete.
S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane
M&L for PCC 1:3:6 type C-1 (using 20 mm stone agg) as in fixing of holdfast including necessary form work and like , complete all specified and directed.
S&F Casement UPVC Window fabricated any size of wall thickness 1.2 mm +0.25 mm made out of extruded section plain UPVC Sections. The window Frame made out of Rigid UPVC Sections miter cut at 4 Corners & joint with plastic fusion welding with internal reinforce required. The shutter section made out of extruded Rigid UPVC with internal reinforced with provision of 5mm Glass as per requirement . The window shall be fixed to wall using 65 x 100 MM long MS fasterners at suitable place provided for each vertical and horizontal member etc. complete as per manufacturer's specification and direction of Engineer - In- Charge.
S&F Casement UPVC Window fabricated any size of wall thickness 1.2 mm +0.25 mm made out of extruded section plain UPVC Sections. The window Frame made out of Rigid UPVC Sections miter cut at 4 Corners & joint with plastic fusion welding with internal reinforce required. The shutter section made out of extruded Rigid UPVC with internal reinforced with provision of Stainless steel wire mesh0.36 mm nominal dia & average widh of aperture 1.40 mm as per requirement . The window shall be fixed to wall using 65 x 100 MM long MS fasterners at suitable place provided for each vertical and horizontal member etc. complete as per manufacturer's specification and direction of Engineer - In- Charge.
Dismantling of AC Corrugated/semi corrugated or translucent sheet as in roof coverings complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L PCC (1:2:4) Type B-1 using 20 mm graded stone aggregate as in coping , roof kerbs or mud stops, packing in side of AC sheet toched to wall, rounded or chamfered on edges complete as all spfd and directed by EIC.
S&F for rolled sections Fe-290 (Gde E- 165) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc complete all as specified and directed.
M&L preparation of old surface of wall by scrapping machine tools/electric hand grinder with wire brush and applying two coats of Synthetic enamel paint over a coat of red oxide primer with paint sprayer complete all as specified and as directed.
S&F in repairs 4mm thick Non asbestos fibre cement building board of 595mmx595mm in size decorative finish with and including powder coated GI false ceiling grid (of ceiling suspension system) of 600x600mm size and galvanized main tee, and cross tee and wall angle grid hanging with including 4mm dia GI wire and roof/ceiling fasteners of butterfly clips etc complete all as specified and as directed.
S&F Solid PVC Double door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet reinforced with M.S. tube, supplying & fixing in opening as per specification & drawing all as pecified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and with single side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.
S&F Steel ventilators with top hung shutter including hinges,steel peg stay, complete
S&F in repairs Vitreous China WHB ,white flat back,size 550x400 mm excluding taps,waste,chain & plug and porcelain stopper but including brackets complete all as specified & directed.
S&F waste fittings 32 mm brass chromium plated for WHB with long screwed shanks and fly nuts ,flange end bedded in red lead cement and other end fixed complete all as specified & directed.
S&F in repair Pillar tap 15 mm bore cast copper alloy with capstan heads chromium plated screwed down high pressure with or without letered Hot or Cold with long screwed shanks and flynuts screwed for iron pipes complete all as specified & directed.
Taking up or down 15 mm bore dia. GI steel tubing and connection including cleaning for re-fixing or removing ot store.
Taking up or down 20 mm bore dia. GI steel tubing and connection including cleaning for re-fixing or removing ot store.
Refixing old steel tubing and connections in new or old position (wall,ceilling,floor etc) bore of pipe 15 mm.
Refixing old steel tubing and connections in new or old position (wall,ceilling,floor etc) bore of pipe 20 mm.
S&F GI tubing medium grade 15 mm bore with all fitting & fixed to wall & ceiling or laid in floors complete.
S&F GI tubing medium grade 20 mm bore with all fitting & fixed to wall & ceiling or laid in floors complete.
S&F in repairsVitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) com plete including provision of lime concrete bedding including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor 'P' or "S" trap and including water closet seat cover complete.
S&F in repairs PVC valveless syphonic action type flushin cistern low level white inlet, ball valves float valves & handle including brackets of 10 litre capacity including down take pipe and making good disturbed portion in CM(1:4) complete.
S&F in repairs 500 ltr capacity of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position and including dismantling water tanks all as specified in SSR part-I.
S&F in repair 20 mm bore Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed.(Minimum weight 20 mm-210 gms) complete.
S&F in repairs 15 mm bore Stop valves fancy type , chromium plated with long shank and cup (concealed type) , cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete as all spfd.
S&F in repairs Brass CP shower rose 125mm size
S&F in repair 75 mm bore PVC(SWR) floor trap, plain with grating including jointing with solvent cment complete as all specified and directed
S&F in repair angle valve 15 mm bore complete all as specified & directed. Make L & K Cat No 0077A or equivalent
S&F in repair soap dish holder complete all as specified & directed. Make Jaquar Cat No CAN 1131 N or equivalent
S&F in repair Tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified & directed.
S&F in repair Towel ring square with round flange complete all as specified & directed.Make Jaquar Cat No CAN 1121 N or equivalent.
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard & railing 60 cm long complete all as specified 7 directed.
S&F in repair PTMT grating doom 100 mm dia (with or without waste hole) completle4 all as specified and directed.
S&F in repair PVC connnection 15mm size with PTMT nuts of length 450mm long complete all as specified and directed.
S&F in repairs 15 mm dia bore Bib taps fancy type chromium plated screwed down screwed for iron pipe or for brass ferrule complete all as specified & directed.
Demolition and breaking up drain pipes 100/75 mm dia (sat glazed ware, AC or reinforced concrete) set in cement mortar complete and directed
S&F 110 mm bore PVC(SWR) Pipes single socketed, in any length with rubber ring joints, fixed to walls complete as all spfd and directed by EIC.
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors
S&F 75 mm bore PVC(SWR) Pipes single socketed, in any length with rubber ring joints, fixed to walls complete as all spfd and directed by EIC.
S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors
S&F 110 mm bore PVC(SWR) bends any radius.
S&F 75 mm bore PVC(SWR) bends any radius.
S&F 110 mm bor e PVC(SWR) branch pieces, single equal or unequal complete as all spfd and directed by EIC.
S&F 75 mm bore PVC(SWR) branch pieces, single equal or unequal complete as all spfd and directed by EIC.
S & F stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing end of stays to wall or roof for 100 mm bore of pipe complete all as directed
M&L for plain cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) as in roof padding,roof kerbs, benching on roof slab and other similar works laid as per slop required finished even and fair complete all as specified and directed.
M&L for cleaning the roof surface from dust / dirt and any other foreign materials and primer applying a coat of bituminious primer @ 0.40 liters per square meter uniformily after the surfaces fully dried complete all as specified and directed.
M&L for rendering 10mm thick in cement mortar (1:3 ) with ( Liquid water proofing ) over concrete surfaces of roof, as per manufacturers instruction complete all as specified and directed.
M&L for APP based polymeric water proofing membrane minimum weight 3 Kg / Sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/Sqm or as per IS), laid over hot bitumen surface by torched application . Membrane shall be laid with 100mm side and 150 end overlap ,sealing all overlap after side complete including treatment at all junctions and corner at least . the membrance shall be tucked into groove on vertical plane and groove sealed with cement mortar. the treatment shall be provided upto 200 mm height or as directed Complete all as specified & as directed.
M&L for 40 mm th brick tiles laid over incl 20 mm thick screed bed in cement using water proofing compound, jointed and pointed in cement sand mortar 1:4 with WPC by wts of cement . The Joints shall be filled with CM(1:3) mixed with crude oil as SSR-2009 (part) After laying the brick tiles the work shall be cured with water by ponding complete all as specified and directed.
Taking down carefully point wiring of any type complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, regulators, wooden batten, surface conduit/casing caping/conceal etc. removing materials including accessories for taking credit and making good disturbed surface to match the existing complete all as specified & directed.
M&L for point wiring with FRLS PVC insulated unsheathed stranded copper conductor cable 1.5 sqmm (nominal area) 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC rigid, medium grade conceal conduit with all fixing accessories of 20mm dia, using new MS sunk terminal boxes of thickness not less 1.2mm, new 3mm thick laminated sheet cover with brass screw and cup washers with all acessories and making good to disturbed conceal surfaces complete all as specified and directed for the following :-
(a) One light/fan/bell point controlled by one switch
(b) One point for socket outlet 5 amps on independent board but not below the switch board in same vertical plane
(c) One point for socket outlet 5 amp same board
One 3 pin 15 Amp socket outlet point controlled by one switch using 2.5 sqmm copper conductor cable with continuous earth wire of 2.5 sqmm copper conductor on independent board.
S&F in repair ceiling rose surface type bakelite 65x50mm three terminal complete all as specified and directed.
S&F angle/batten type holder insulated body with back plate suitable for light point complete all as specified and directed.
S&F switch piano flush type, 5 amps, 230V AC,single pole, one way complete all as specified & directed.
S&F socket out let 2-in-1, 3 pin, 5 amp flush type complete all as specified & directed.
S&F switch piano flush type 16 amps, 230V AC single pole one way complete all as specified & directed.
S&F socket out let 2-in-1, 3 pin, 5 & 15 amp flush type complete all as specified & directed.
S&F fan regulator, 5 stepped, electronic type, single phase, 80 watt, socket size incl connection complete complete all as specified & directed.
S&F in replacement of sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug and socket along with one MCB, single pole of current rating 20 amps, C series 240 volts AC complete all as specified & directed.
Taking down main switches fuse unit, MCB/Kit kat distribution board with steel enclosure along with MCB’s /Kit kat fuse of any amps/ways including wooden board or from steel board and making good disturbed surfaces complete all as specified & directed.
S&F sheet metal enclosure for MCB's 240 volt 12 way single pole and neutral with 200 amps rated bus bar, double door on wall with and including suitable flat iron clamps duly grouted/ fixed flush in the wall complete all as specified and directed.
S&F sheet metal enclosure for MCB's 240 volt 8 way single pole and neutral with 200 amps rated busbar, double door on wall with and including suitable flat iron clamps duly grouted/ fixed flush in the wall complete all as specified and directed.
S&F MCB single pole, 6 to 32 amps rating, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
S&F MCB single pole & Neutral, 32 amps rating, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
S&F MCB single pole & neutral 40/63 amp, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories complete all as specified & directed.
M&L for two single core (submain) FRLS PVC insulated cable and one single core green PVC insulated copper conductor earth continuity cable as mentioned below is drawn in and including non metallic, medium duty, rigid PVC conduit not less than 20 mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as directed. Note :- (I) The cost for cutting, chases required shall deemed to be included in the quoted unit rate. (II) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM
(a) 2x4.0 sq. mm + 1x2.5 sq. mm earth wire
(b ) 2x6.0 sq. mm + 1x4.0 sq. mm earth wire
(c) 2x10.0 sq. mm + 1x6.0 sq. mm earth wire
M&L for cutting & Chasing required on brick wall, exceeding 20 CM girth and making good to disturbed surface with cement mortar 1:3 including facing / finishing where as required to match with existing surfaces to recess the MCB DB/sheet steel enclousure complete all as specified and directed.
M&L for Cutting & chasing required on brick wall not exceeding 10 CM girth for concealed conduit wiring and for GI earth wire including making good to disturbed surface with cement mortar 1:3 and distemper / colour wash to match with existing surfaces including facing / finishing where as required complete in all respect as specified and directed.
M&L for Supply & fixing in replacement of worn out/rusted sunken box with pressed MS/GI steel terminal boxes of depth not less than 50 mm, flush type of thickness lot less than 1.22 mm of following size alongwith new 3.0 mm thick plastic laminated sheet cover of suitable size including cutting/drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer and making good to disturbed surface with cement mortar complete in all respect as specified and directed.
(i)100mm x 100mm
(ii) 175mm x 100mm
Taking down existing old /worn out tube/CFL/bulk head/sketch light fittings of indoor type fixed on wall of any type/size with its all accessories including lamp complete all as specified & directed
Supply & fixing surface /wall mounted light fitting in CRCA powder coated white housing with pre wired suitable for single T8 LED tube along with supply and fixing one number LED tube in polycarbonate housing of nominal wattage - 18 Watt, Lumen out put - 2100 Lm, Colour Temp - 6500 Kelvin, Size & Length - G13/ T8/ 4 Feet with integral/in built driver, having short circuit and surge protection including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Cat Part No for batten:- REGALBATTENT8UPTO1X18WDSBSWH of make Havells 'or' IGP161LT8-16 of make Crompton 'or' TMC501 P 1xT-LED 22W P3241 of make Philips or its equivalent as approved Cat Part No for Tubelight:- PHOTANULTRA2.01213T8SSTL18WLED865SPC of make Havells 'or' LTT8-20 of make Crompton 'or' MAS LEDtube 1200MM 18W865 T8 I-2100 lm of make Philips or its equivalent as approved
Supply & fixing energy efficient LED light of 10 Watt of length - 02 Feet long having minimum 1150 Lumen output, wide voltage protection range 140-270 Volt AC housed in extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Cat part No: -LUMILINEPLUSSBS10WLED865SPCSS of make Havells 'or' BN 021 LED10S- 6500 PSU GR S1 of make Philips 'or' LDL-10-WW of make Crompton or its equivalent as approved
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.as specified or directed by Engr-in- Charge.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers as specified and directed by Engr-in-Charge.
M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete all as specified and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
S&F (in replacement) bracket for street light made out of 40 mm bore GI pipe medium grade not less than 1.2 mtr length bent at 120 degree to shape fixed on pole/wall with and including 50x6mm FI clamps = 02 Nos with nut bolts, washers including painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
GITANSH CONSTRUCTION CO.
Jahanvi enterprises
M/S A P CONSTRUCTION
Siddhi Constructionn
M/S VIVEK DUBEY
Channa Brothers and Co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .