REPAIR TO CERTAIN WOODEN FURNITURE AND CANNING OF DIFFERENT KINDS OF WOODEN FURNITURE UNDER GE MH AND RH KHADKI

Amount

Taking down carefully unserviceable parts of CHAIR DINING, and supply & fixing and tightening new parts with bamboo pins and SS Screws (ISI marked) as per existing shape and size. Note : Timber shall be of 1st class hard wood Teak. Drg No : FD-279, 228

Front leg

Rear leg

Stiffner

Back rest

PVC/hard rubber shoe

Corner

Taking down carefully unserviceable parts of CHAIR WRITING and supply & fixing and tightening of new parts with bamboo pins and SS Screws (ISI marked) as per existing shape and size. Note : Timber shall be of 1st class hard wood Teak. Drg No : FD-250, 280

Front leg

Rear leg

Stiffner

Arm rest

Back rest

PVC/hard rubber shoe

Corner

Taking down carefully unserviceable parts of CHAIR EASY and supply & fixing and tightening new parts with bamboo pins and SS Screws (ISI marked) as per existing shape and size Note : Timber shall be of 1st class hard wood Teak. Drg No : FD-229

Front leg

Arm rest

PVC/hard rubber shoe

Corner

Taking down carefully following unserviceable component / member of TABLE DINING 6 / 8 PERSONS and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge Note : (i) Timber shall be of Ist class hard wood Teak (ii) 4 mm thick teak wood beading shall be provided all round all as shown on drg. Drg No : FD-273, 30(M)/FD/MAP/-II/03

18/19mm thick Prelaminated MDF Board two side laminated exterior grade type-II grade-I ISI marked for table top for Table dining 8 persons of size 1800 x 900.

18/19mm thick Prelaminated MDF Board two side laminated exterior grade type-II grade-I for ISI marked table top for Table dining 6 persons of size 1500 x 900.

Leg of size 75 x 40 x 742 mm.

Long rail of size 25 x 100 x 1800 mm for table dining 8 person

Long rail of size 25 x 100 x 1500 mm for table dining 6 person

Short rail of size 25 x 100 x 900 mm

25 mm thick and 90 mm wide Stiffener

Corner of timber

PVC/hard rubber shoe

Taking down carefully unserviceable parts of BED PLY TOP and supply and fixing new parts as per existing shape and size with bamboo pins / nut bolts / screws and tightening of frame as per drg and as directed by Engr-in-Charge Note : Timber shall be of 1st class hard wood Teak. Drg No : FD-246

4mm thick one side teak face veneer sheet ISI Marked BWR of size 780 x 340 mm on both side for head board / rest all as per drg.

4mm thick one side teak face Veneer sheet ISI Marked BWR of size 780 x180 mm for foot rest / boards all as per drg.

12 mm thick Plywood BWR grade

Bottom rail of required shape and size all as per drg.

Long rail of required shape and size all as per drg.

Leg of head board of required shape and size all as per drg.

Leg of foot board of required shape and size all as per drg.

Corner to strengthen long rails and leg all as specified by Engr-in Charge.

Taking down carefully unserviceable TABLE TOPs and supply and fixing new as per existing shape and size with bamboo pins / nut bolts / screws and tightening of frame as per drg and as directed by Engr-in-Charge.

M & L for replacement of damage/torn out table top with 18/19mm thick Prelaminated MDF Board Two side laminated exterior grade type-II grade-I with 4mm thick teak wood edging all around for TABLE OFFICE OFFICER WOODEN Drg No : DB-4119 /FD-1002

M & L for replacement of damage/torn out table top with 18/19mm thick Prelaminated MDF Board Two side laminated exterior grade type-II grade-I. with 4mm thick teak wood edging al around for TABLE OFFICE CLERK WOODEN Drg No : DB-4120

M & L for replacement of damage/torn out table top with 18/19mm thick Prelaminated MDF Board Two side laminated exterior grade type-II grade-I with 4mm thick teak wood edging al around for TABLE WOODEN 3' x 3'. Drg No : FD-4120 / FD-1007

Taking down carefully unserviceable components of TABLE DRESSING LADIES and supply and fixing new components as per existing shape and size with bamboo pins / nut bolts / screws and tightening of frame as per drg and as directed by Engr-in-Charge Drg No : FD-251/ FD-232

Sliding glass shutter of size 5.0 thick, 550mm x 380mm with aluminum channel of table dressing ladies complete as as specified and directed.

Mirror 366mm x 1220 x 5.0mm thick of table dressing ladies, complete all as specifed and directed.

Back frame made out of 6mm thick commercial ply wood and 45mm x 40mm 1st Class teak wood frame as per existing, complete all as specified and directed.

Chromium plated knob 25mm dia 24mm length of best quality as approved.

Drawers made out of 12mm thick prelaminated particle board exterior grade approved by GE, exposed edges shall be 4mm thick wooden edge finish duly polished, all as per existing and fixed complete.

Leg with frame 1st class teak wood as per existing/drawing, complete all as specified and directed.

Box w/o drawer of 18/19mm thick prelaminated particle board exterior grade approved by GE, exposed edges shall be 4mm thick wooden edge finish duly polished, all as per existing and fixed complete.

Taking down carefully unserviceable components of TABLE DRESSING GENTS and supply and fixing new components as per existing shape and size with bamboo pins / nut bolts / screws and tightening of frame as per drg and as directed by Engr-in-Charge Drg No : FD-230/31

Mirror of size 380mm x 760mm x 5.0mm thick all as shown on drg, and directed by the Engr-in-Charge

Back frame made out of 35mm x 25mm 1st Class teak wood & 6mm thick commercial ply grade MR, type BB, all as shown on drg, and directed by the Engr-in-Charge

Chromium plated knob 25mm dia, as approved by the Engineer-in-Charge of best quality.

Drawer of table dressing gents as per existing/drawing complete all as specified and directed.

Box (size 900 x 300 x 150 mm) w/o drawer made out of 18/19mm thick prelaminated particle board exterior grade approved by GE, exposed edges shall be 4mm thick wooden edge finish duly polished, all as per existing and fixed complete.

Fixing only fitting of loose / dismantaled / sagged table dressing gents to the wall with "L" Bracket (Pair) as per drg and all accessories such as screw, clips, plugs, clamps, etc complete all as directed by Engr-in-Charge. Note : Rate of bracket (pair) shall be deemed to be included in unit rate quoted.

Taking down carefully / removing following unserviceable component / member of TABLE BED SIDE and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : FD-276

18/19 mm Thick prelaminated Particle board exterior grade for table top of same size and shape all as per drg.

18/19 mm Thick prelaminated Particle board exterior grade for side of table of same size and shape all as per drg.

12 mm thick prelaminated Particle board exterior grade for shelf of same size and shape.

6 mm thick BWR ply wood for back BWR grade all as specified and shown in drg.

Taking down carefully unserviceable parts of PEG TABLE and supply and fixing new parts as per existing shape and size with bamboo pins / nut bolts / screws and tightening of frame as per drg and as directed by Engr-in-Charge Drg No : FD-277

Top of 18/19 mm thick Prelaminated MDF Board Two side laminated exterior grade type-II grade-I including 4 mm thick Teak wood beading all round of same size and shape

Leg made of 1st class teak wood as per drg.

Long rail made of 1st class teak wood as per drg.

Short rail made of 1st class teak wood as per drg.

Stiffener made of 1st class teak wood as per drg.

PVC/hard rubber shoe heavy duty complete all as directed by Engr-in-Charge.

Corner made of 1st class teak wood to strengthen rail and leg all as specified by Engr-in Charge.

Taking down carefully unserviceable components of SIDE BOARD and supply and fixing new components as per existing shape and size with bamboo pins / nut bolts / screws and tightening of frame as per drg and as directed by Engr-in-Charge. Drg No : FD-1112

Top of Prelaminated Particle board exterior grade 18/19 mm thick of same size and shape

Side made of prelaminated Particle board exterior grade 18/19 mm thick of same size and shape as shown on drg.

Back of size 1200mm x 600mm ply wood 6 mm thick BWR grade.

Powder coated MS Handle 100mm long all as specified and shown on drg.

Shutters 375 x 475 x 18/19 mm thick of the cup board and shutter made of prelaminated particle board exterior grade all as per drg.

Bottom made of prelaminated particle board exterior grade 18/19 mm thick of same size and shape as shown on drg

Shelf made of 18/19 mm thick prelaminated particle board exterior grade of same size and shape as shown on drg

Bottom frame with four legs made of 1st class teak wood as per drg.

Taking down carefully unserviceable parts of TABLE CENTRE and supply and fixing new parts as per existing shape and size with bamboo pins / nut bolts / screws and tightening of frame as per drg and as directed by Engr-in-Charge. Drg No : FD-274

Top 18/19 mm thick of Prelaminated MDF Board two side laminated exterior grade type-II grade-I including 4 mm thick Teak wood beading all round of same size and shape

Leg made of 1st class teak wood as per drg.

Short rail made of 1st class teak wood as per drg.

Long rail made of 1st class teak wood as per drg.

PVC/hard rubber shoe heavy duty complete all as directed by Engr-in-Charge.

Taking down carefully unserviceable components of TEAPOY WOODEN and supply and fixing new components as per existing shape and size with bamboo pins / nut bolts / screws and tightening of frame as per drg and as directed by Engr-in-Charge. Note : Timber shall be of 1st class hard wood Teak. Drg No : FD-278

Top 18/19 mm thick of Prelaminated MDF Board two side laminated exterior grade type-II grade-I including 4 mm thick Teak wood beading all round of same size and shape. Note : Timber shall be of 1st class hard wood Teak.

Leg all as per drg.

Short rail all as per drg.

Long rail all as per drg.

PVC/hard rubber shoe complete all as directed by Engr-in-Charge.

Taking down carefully unserviceable parts of STOOL DRESSING and supply and fixing new parts as per existing shape and size with bamboo pins / nut bolts / screws and tightening of frame as per drg and as directed by Engr-in-Charge. Note : Timber shall be of 1st class hard wood Teak. Drg No : FD-252, FD-282

Short rail as per drg.

Long rail duly as per drg.

Taking down carefully unserviceable parts of TABLE WRITING and supply and fixing new parts as per existing shape and size with bamboo pins / nut bolts / screws and tightening of frame as per drg and as directed by Engr-in-Charge. Note : Timber shall be of 1st class hard wood Teak. Drg No : FD-33/249 /275

Top of size 1145 x 600 x 18/19 mm made of 18/19 mm thick of Prelaminated MDF Board two side laminated exterior grade type-II grade-I and teak wood beading all round 4 mm thick shall be provided all as specified and shown on drg.

Leg all as per drg.

Plywood 6mm in bottom of drawer complete all as specification and directed.

Chromium plated knobs.

Stiffner of 1st class teak wood as per drg.

Drawers of size 600 x 500 x 18 mm pre laminated particle board exterior grade ISI marked all as per drg complete.

Lock of drawers 6 lever 50 mm all as per drg complete.

PVC/hard rubber shoe complete all as directed by Engr-in-Charge.

Long rail made of 1st class teak wood as per drg.

Short rail made of 1st class teak wood as per drg.

Rear side 6mm thick ply wood as per drg.

Shutter made of 18mm prelaminated particle board exterior grade with 4mm thick beading hung with SS piano type hinges complete as per drg.

Knob for shutter as approved by Engr-in-Charge.

Taking down carefully unserviceable parts of TABLE 3' x 2' WITH OR WITHOUT DRAWER and supply and fixing new parts as per existing shape and size with bamboo pins / nut bolts / screws and tightening of frame as per drg and as directed by Engr-in-Charge. Note : Timber shall be of 1st class hard wood Teak. Drg No : FD-42/ 283/ 224/284/231

Short rail of size 25 x 65 x 600 mm for table as per drg.

Long rail of size 25 x 65 x 900 mm for table as per drg.

Leg of size 60 x 60 x 760 mm for table as per drg.

Stiffner side of size 25 x 40 x 600 mm for table as per drg.

Stiffner centre of size 25 x 40 x 900 mm for table as per drg.

Top of size 900 x 600 x 18/19 mm thick prelaminated particle board one side white and other side teak wood finish lamination, with 4 mm thick teak wood beading for table top all around as per drg & as directed by Engr-in-Charge.

Drawer with knob as per existing shape & size etc complete as per drawing and as directed by Engr-in-Charge.

Taking down carefully unserviceable components of Table 1200 x 900mm and supply and fixing new components as per existing shape and size and as per drg with bamboo pins / nut bolts / screws and tightening of frame as per drg and as directed by Engr-in-Charge. Note : Timber shall be of 1st class hard wood Teak. Drg No : FD-273

Long rail of size 25 x 65 x 1200 mm for table as per drg.

Short rail of size 25 x 65 x 900 mm for table as per drg.

Leg of size 60 x 60 x 760 mm for table as per drg.

Table top of size 1200 x 900 x 18/19 mm thick Prelaminated MDF Board Two side laminated exterior grade type-II grade-I with 4 mm thick teak wood beading for table top all around as per drg & as directed by Engr-in-Charge.

Bracket of size 75 x 75 x 25 mm for table as per drg.

Taking down carefully unserviceable parts of BIN LINEN MULTIPURPOSE and supply and fixing new parts as per existing shape and size and as per drg and as directed by Engr-in-Charge. Drg No : FD/E6/MAP/09

Top made of prelaminated particle board exterior grade 18/19 mm thick of same size and shape as shown on drg.

Sides made of prelaminated particle board exterior grade 18/19 mm thick of same size and shape as shown on drg.

Back ply wood 12 mm thick BWR grade.

Chromium plated knobs complete all as specified and shown on drg.

Shutter made of 18/19 mm thick prelaminated particle board exterior grade as per drg.

Bottom made of 18/19 mm thick prelaminated particle board exterior grade 18/19 mm thick of same size and shape as shown on drg

Bottom frame and leg made of 1st class teak wood as per drg.

Taking down carefully following unserviceable component / member of BOOK CASE and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Drg No : FD-45

6 mm Thick commercial ply back as per shape and size shown in drg

Bottom frame and leg made of 1st class teak wood as per drg.

18/19 mm thick prelaminated particle board exterior grade for door shutter as per drg

Taking down carefully / removing following unserviceable component / member of CHAIR DINING WITH CUSHION (MAP) and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Note : Timber shall be of 1st class hard wood Teak. Drg No : MAP: FD/E6/ MAP/II/04

Cushion 32 density 75mm thick for seat duly covered leathrite rexine (not less than Rs 250/- per mtr) (shade as approved by GE/Engr-in-Charge) as per existing shape and size as directed by GE.

Front leg

Rear leg

Batten

Side rail

12mm thick BWR plywood for seat.

Taking down carefully following unserviceable component / member of Chair Easy with Cushion and supply, fixing and tightening new component / member with bamboo pins and SS Screws (ISI marked) as per existing shape and size complete all as shown on drg and as directed by Engr-in-Charge. Note : Timber shall be of 1st class hard wood Teak. Drg No : FD-358

Front leg

Rear leg

PVC/hard rubber shoe

Corner

M&L for removing existing old unserviceable Seat of Chair Easy Cushioned and S & F New Seat Foam Cushioed with Frame (measurement & Size & specification as per Drg) Foam with Cushioned covered with Rexin cloth including providing long cloth lining for cushion with the help of suitable stappler pin for upholstery work as per drg and direction of Engr-in-charge.

M&L for removing existing old unserviceable Back of Chair Easy Cushioned and S & F New Back Foam & Cushioed with Frame (measurement & Size & specification as per Drg) Foam with Cushioned covered with Rexin cloth including providing long cloth lining for cushion with the help of suitable stappler pin for upholstery work as per drg and direction of Engr-in-charge.

M&L for removing existing old unserviceable arm of Chair Easy Cushioned and S & F New arm with Foam & Cushioned (measurement & Size & specification as per Drg) Foam with Cushioned coverd with Rexin cloth including providing long cloth lining for cushion with the help of suitable stappler pin for upholstery work as per drg and direction of Engr-in-charge.

Taking down carefully unserviceable cane from different types of chairs and other furniture articles and M&L for recaning the same with new 2mm wide oval type plastic cane and bordering with 3mm wide plastic cane complete all as shown & as directed by Engr-in-Charge.

Mahesh Traders

Imprint Digitech

M/s Green Leaf Electricals