Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.3 CrAccepted-AOC AT STATION ROAD JAMTARA JHARKHAND 815351 | JAMTARA | JHARKHAND | 815351 | ₹1.3 Cr | L1 | Accepted-AOC L1 bidder |
| 2 | L2₹1.3 CrRejected-AOC DUMKA ROAD OPPOSITE IRRIGATION COLONY JAMTARA JHARKHAND 815351 | JAMTARA | JHARKHAND | 815351 | ₹1.3 Cr | L2 | Rejected-AOC L2 bidder |
| 3 | L3₹1.3 CrRejected-AOC | ₹1.3 Cr | L3 | Rejected-AOC L3 bidder |
| 4 | L4₹1.4 CrRejected-AOC | ₹1.4 Cr | L4 | Rejected-AOC L4 bidder |
Updated dates
Tender Value
₹1.3 Cr
EMD Value
₹2.7 L
Closing Date
21 Oct 2025, 5:00 pmClosed
Chief Engineer
Jharkhand Police Housing Corporation Limited Line Tank Road Ranchi 834001
External Electrification Work and Cable Trench Work 450 x 600 mm at Home Guard Jamtara in the district of Jamtara.
2025_JPHCL_105135_1
JPHCL/GR 08/NIT 04/2025-26
Open Tender
Electrical Works
240 days
Jamtara
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,000
₹2.7 L
Yes
13 May 2026
26 Sept 2025
24 Oct 2025
26 Sept 2025
21 Oct 2025
26 Sept 2025
5.1.1 Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 m including all lifts, levelling , ramming the foundation trenches, removing roots of trees, serbs all complete as per approved design,building specification & direction of E/I.
5.1.2 Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B)
5.1.10 Providing coarse clean local sand in filling in foundation trenches or in plinth including ramming and watering in layer not exceeding 150mm thick with all leads and 1.5M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer Incharge (Mode of measurement compacted volume)
5.3.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 5.3.1.2 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
5.2.3 Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I.
5.3.17.20 Centering and Shuttering including strutting, propping etc. And removal of form for Suspended floors, roofs, landings, balconies and acces platorm with water proof ply 12mm thick
5.5.4 Providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL)
5.7.2 Providing 12mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.
5.7.11 Providing 1.5 mm thick cement punning including curing, carriage of water with all leads and lifts of water as per building specification and direction of E/I.
Approved basic rates of material item No. 29+ 10%C.P. Supplying of M.S.ANGLE OF 25X25X6 for support of Concertina wire including all carriage, taxes, all complete.
Carriage of materials by truck or by any mechanical means loading,unloading & stacking etc. all complete job as per direction of E/I.
Bricks(1k+7p)= 8 km
Coarse sand (1K+14 Km)= 15 KM
Stone Chips (1K+44P = 45 km)
Cement (5 km)
Steel (5 km)
Note:- (1)PVC insulated copper conductor cable of make:-Havell's/HPL/Polycab/Mescab/Anchor (2)PVC conduit of thickness 1.5mm/2mm for wiring:-Polycab/Arkaylitel/Saini star (3)Switches/socket outlet for piano type:-Anchor/ Cona/Havells/HPL (4)Switches/soket outlet for modular type:-Roma(Anchor/wood)/Havell's(carbtree)/ Hpl/Philips/Cona (5)MCCB,MCB,SFU,CHANGEOVER,RCCB,MCB-DB:-Havell's/Hpl/L&T/Legrand/C&S (6)XLPE/PVC aramoured cable:-Havell's/polycab/V-guard (7)Electrical fitting/fixtures:-Bajaj/Philips/Crompton/Havell's
3.7 S/L 8 SWG copper wire ground :- Supplying and laying 8 SWG copper wire 0.50 metre bellow ground level for conductor earth electrode, including soldring etc. as required.
5.1 Laying of one number PVC insuleted and PVC sheathed/ XLPE power cable of 11 KV grade of size not exceeding 35 sq.mm. direct in ground including excavetion, sand coushioning, protective covering and refilling the trench etc as required.
5.2 Laying of one number PVC insuleted and PVC sheathed/ XLPE power cable of 11 KV grade of size exceeding 35 sq.mm.but not exceeding 95sq.mm. direct in ground including excavetion, sand coushioning, protective covering and refilling the trench etc as required.
Supply of PVC XLPE insuletd PVC sheathed, heavy duty, armoured electrical cable with aluminium conductor for working voltage upto and including 1100 volts,(conforms to IS:7098, part-1)g
M-326 25 sq.mm. 3.5 core
M-333 185 sq.mm. 3.5 core
M-327 35 sq.mm. 3.5 core
M-328 50 sq.mm. 3.5 core
9.1 SITC of following rating LED street lighting luminarie with pressure dia cast housingh and toughned glass cover ,IP 66 Protection , LUMINOUSEFFICARY >_110 LM/W with lens in existing pole /pipe for supply voltage 100-270V AC ,50 Hz, luminarie shall be confirm to IS 10322 part -5 /section -3 and shall be complete with all neccssary accessosries as required.
9.1.7 90 /100 W LED Street light of make bajaj/havells/crompton/C&S
9.2 S.I.T.C of floowing rating LED Flood lighting luminarie with pressure die cast housing and toughened glass cover ,IP 66 protection ,LUMINIOUS EFFICARY >110 LM/W,with lens in existing pole/pipe for supply voltage 100-270V AC,50Hz Luminate shall be confirm to IS 10322 part 5/section 5 and shall be complete with all necessary accessories as required
9.1 DSR Supplying and making end termination with brass commpression gland and aluminium lugs for following size of PVC insuleted and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required.
9.1.20 DSR 3½ X 25 sq. mm (28mm)
FEEDER PANEL (1)
(A) INCOMING
M- 445 COPPER WIRE 1.5MM
FEEDER PANEL (2)
LT PANEL (NORMAL SUPPLY) :35 KA) -INCOMING (1- sets ) each with following:
(C)OTHER ACCESSOSRIES
M- 445 COPPER WIRE 1.5MM
FEEDER PANEL (3)
LT PANEL (NORMAL SUPPLY) :35 KA) -INCOMING (1- sets ) each with following:
(A) INCOMING
M - 321 250A MCCB FP Adjustable thermal seting 35 KA
M -620 400A TPN BUSBAR(COPPER)
(B) OUTGOING
M - 318 25/100A 16 KA MCCB FP Adjustable thermal seting
M - 319 125A 16 KA MCCB FP Fixed thermal seting
2.12.5 6/32 amps ,DP
(C)OTHER ACCESSOSRIES
M- 873 A DIGITAL VOLT METER 500V(3phase class 0.5)
M- 873 B DIGITAL A METER 500V(3phase class 0.5)
M- 445 COPPER WIRE 1.5MM
M- 448 COPPER WIRE 6MM
M- 449 COPPER WIRE 10MM
M- 450 COPPER WIRE 16MM
M- 451 COPPER WIRE 25MM
M- 1455 LED INDICATOR LAMP R/Y/B/G
M- 1452 C.T COIL OF CT ratio 500/5 IS2705 part -3
Analysed item S/F WEATHERPROOF CANOPY TYPE double door with rubber gasket Floor mounted cubical panel board , fabricated with 16 gauge iron sheet with Iron angle frame padestal etc suitable for panel mounted switch disconnector, Space for busbar,insulator,switchgears and painting etc.as required .AS PER E/I (but without busbar copper strip /Switchgears/MCB's/MCCBsWire and other accessosries) The rate of this itom is sum of A+B+C =Rs.59011.15@ 50% That is Rs.29505.57
MAIN PANEL
LT PANEL (NORMAL SUPPLY) :35 KA) -INCOMING (1- sets ) each with following:
(A) INCOMING
M - 597 800A 35 KA MCCB FP Adjustable thermal seting
M - 321 250A 35 KA MCCB FP Adjustable thermal seting
M - 319 125A 35 KA MCCB FP Adjustable thermal seting
M - 589 630A changover FP (ON-LOAD) Open excution type
M - 583 125A changover FP (ON-LOAD) Open excution type
M - 586 250A changover FP (ON-LOAD) Open excution type
M -618 200A TPN BUSBAR(COPPER)
M -619 300A TPN BUSBAR(COPPER)
M - 623 800A TPN BUSBAR(COPPER)
(B) OUTGOING
M - 324 500A MCCB FP Adjustable thermal seting 35 KA
M - 320 150/160 A MCCB FP, 35 KA fixed thermal magnetic seting
M - 319 125 amps, 16 KA fixed thermal seting 16 KA
M - 318 25/100A 16 KA MCCB FP Adjustable thermal seting
2.12.3 32 amps.SPN MCB
2.12.10 63 amps. TPN MCB
(C)OTHER ACCESSOSRIES
M- 873 A DIGITAL VOLT METER 500V(3phase class 0.5)
M- 873 B DIGITAL A METER 500V(3phase class 0.5)
M- 445 COPPER WIRE 1.5MM
M- 448 COPPER WIRE 6MM
M- 449 COPPER WIRE 10MM
M- 450 COPPER WIRE 16MM
M- 451 COPPER WIRE 25MM
M- 1455 LED INDICATOR LAMP R/Y/B/G
M- 1453 C.T COIL OF CT ratio 800/5 IS2705 part -3
Analysed item S/F WEATHERPROOF CANOPY TYPE double door with rubber gasket Floor mounted cubical panel board , fabricated with 16 gauge iron sheet with Iron angle frame padestal etc suitable for panel
Add 18% GST
Add 1% Lebour Cess
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.47 MB
Techbid8.pdf
Tender Documents • 7.05 MB
BOQ_141486.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid