Annual repair and maintenance to Sub Treasury office Building at Theog

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) All work up to plinth level i/c all lead and lift and as per the direction of engineer in charge

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. including all leads and lifts, as per HPPWD, specification of 1990 volume-I as directed by the Engineer-In-Charge

Providing and laying Cement Concrete 1:1.5:3 (1 cement :1.5 Sand : 3 graded stone aggregate 20 mm nominal size ) and Curing complete excluding Cost of form work and reinforcement for reinforced Concrete work in including all leads and lifts as per direction of the Engineer-in-Charge Walls (any thickness but not less than 0.10 metre thickness) including attached pilasters, butteresses, plinth and string courses etc.from top of foundation up to heights and floor.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing wood work in frames of Door Window Clerestory Window And other frame wroughr framed and fixed in position in hold fast lugs or with dash fasteners of required dia And length second class teak wood. including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws.including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete.300x16mm ( Three hundred into sixteen millimetre )including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads, lifts and other incidental charges.200x10mm (Two hundred fifty into ten millimeter)

150x10mm (One hundredfifty into ten millimeter)

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials within all leads, lifts and other incidental charges.125mm ( one hundred twenty five millimetre)

75mm ( one hundred millimetre)

Providing and fixing 19 mm Thick water proof comercial bord in shelves /box for cup bord with butt joints &nails & Screw etc complete.including carriage of materials within all leads, lifts and other incidental charges

Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one sidedecorative lamination and other side balancinglamination, including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and brightfinished stainless steel piano hinges, complete as perdirection of the Engineer-in-Charge

Providing and fixing 1.00 mm Thick coloured or plan lamination sheet (Sunmica) on bords/ply wood sheets with approved adhesive and nails etc cpmplete.including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge

Providing and fixing bright finished bright finished brass furniture handles.including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing bright finished brass ball catcher 10 mm dia.including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing oxidized M.S hasps and stapples (safety type) with necessary screws etc. complete..including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing 63x35 mm special quality chromium plated brass cup bord lock with six levers including necessary screw etc. Complete . (indian make.)including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing 1st quality ceramic glazed floor tilesconforming to IS : 15622 (thickness to be specified bythe manufacturer ) of approved make in all colours,shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers ofsteps and dados over 12 mm thick bed of cement Mortar1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

15 mm cement plaster on the rough side of single or half brick wall of mix.Cement Mortar 1:6 including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge

16 mm cement plaster on the rough side of single or half brick wall of mix.Cement Mortar 1:6 including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade.including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge

Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge

Painting with oil type wood preservative of approved brand and manufacture New work (two or more coats) including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge With white enamel paint

Melamine polishing on wood work (one or more coat).including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all completeFixed to openings /wooden frames with rawl plugs screws etc.including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge .

Making connection of G.l distribution branch with G I main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete including all leads and lifts as per direction of the Engineer-in-Charge 25 to 40mm nominal bore

Providing and fixing soil waste pipe100 mm.Nominal size.Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge 75mm nominal size Centrifugally cast ( spun) iron socket pipe as per IS 3989

100 mm Nominal size centrifugally cast (spun) iron socketed pipe as per IS ;3989

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick bolts and nuts complete including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge 75 mm nominal size.

100 mm Nominal size

Providing and fixing Plain bend of required degree including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge 75 mm nominal size.

100 mm Nominal size

Singal equal branch of requirerd degree 75 mm nominal size.

100 mm Nominal size Sand cast iron S&S As per IS-1729

Collor 75 mm Nominal size

100 mm Nominal size

Providing and fixing cast iron floor trap of self cleaning desion with sand cast iron screwed down or hinged grating with out vent arn complete including cost of cutting and making goods the walls and floors :-

Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm+ with P or S trap including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing controlled flush vitreous China low level flushing cistern with all fitting complete 10 litres capacity white with in all leads and lifts or as per the direction of Engineer-in-charge.

White vitreous china wash basin size 550x400 mm with a pair of 15 mm C.P Brass paillar taps.

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete as per the direction of Engineer-in-Charge.for wash basin or sink :-32mm dia

Providing and fixing 100 mm dia sand cast irongraiting for gully trap including carriage of material with in all leads and lifts.and as per the direction of Engineer in-charge

Providing and fixing 600mm x 450 mm bevelled edge miror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers. including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete..

Providing and fixing C.P Brass bib cock/tap of approved quality confirming to IS 8931 ( 15mm dia) with in all leads and lifts or as per the direction of Engineer-in Charge.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge15mm without Nuts and pipe.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge to IS:8931 15 mm nominal bore

Providing and fixing P.V.C connection with brass unions.300/450mm length including carriage of materials within all leads, lifts and other incidental charges

Providing and fixing stainless steel A ISI 304 (18/18) Kitchen sink as per IS:13983 With C.I. Brackets and stainless steel plug 40 mm including painting and brackets, cutting and making good the walls wherever required: including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing toilet paper holder :C.P. Brass. including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge

Providing and fixing Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) :including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge (a) Polyester powder coated aluminum ( minimum thickness of polyester powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge. (Glazing, paneling and dash fasteners to be paid for separately) (a) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868 Minimum anodic coating of grade AC15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):including carriage of Material with in all leads and lifts as per the direction of Engineer-in-charge (a) With float glass panes of 5mm thickness ( weifht not less than 12.50kg/sqm.)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. (a) Pre-laminated particles board with decorative lamination on one side and balancing lamination on other side.

Naresh Kumar