Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.8 LAccepted-Finance | ₹2.8 L | L1 | Accepted-Finance accepted |
| 2 | L2₹3.5 L+₹73,429 (26.6%)Accepted-Finance 0 KHUNMOH INDUSTRIAL AREA 3RD PHASE SRINAGAR JAMMU KASHMIR 190001 | SRINAGAR | JAMMU AND KASHMIR | 190001 | ₹3.5 L+₹73,429 (26.6%) | L2 | Accepted-Finance accepted |
| 3 | Not Admitted-Fee/PreQual/Technical DALIPORA NEAR WANI MASJID AUQAAF BUILDING DALIPORA NEAR WANI MASJI PULWAMA BUDGAM JAMMU KASHMIR 190015 | SRINAGAR | JAMMU AND KASHMIR | 190015 | - | - | Not Admitted-Fee/PreQual/Technical Others-Experience and performance certificates not uploaded |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Others-Experience and performance certificates not uploaded |
| Sl No | Description | Qty | Unit | M/s Sopore Engineering Works L1 | M/S ECO FABRICATORS AND BUILDERS L2 |
|---|---|---|---|---|---|
| 1.00 | Design, Fabrication, Installation, Testing & Commissioning of Fixed V-Type Snow Plough: Wedge type Fixed V blade fabricated out of MS sheets with EN8 cutting edge compatible with the Snow-Cat Sonalika 60HP & Snow-Cat New Holland 75HP. The bidder shall furnish manufacturers test certificate in support of metallurgical composition of plough sheets & EN8 cutting edge.
The fabrication of the snow plough shall be carried out using high-quality mild steel (MS) sections conforming to the relevant Indian Standards. The minimum thickness of the MS sheet used for fabrication of the snow plough mouldboard and associated components shall not be less than 4 mm.
The structural members shall conform to the following minimum requirements:
1. Mounting plates and channels: Minimum thickness 6 mm.
2. Reinforcing members (stiffeners): Minimum thickness 6 mm.
3. Top angle: 1½ inch × 1½ inch × 6 mm MS angle or equivalent.
4. Bottom angle: 3 inch × 3 inch × 6 mm MS angle or equivalent.
5. Hydraulic cylinder base support: MS square tube of size 3½ inch × 3½ inch × 8 mm thickness or equivalent.
6. Hydraulic cylinder end plates: Fabricated from 6 mm thick MS plate.
7. Turnbuckle: Minimum 40 mm diameter.
The cutting edge shall be manufactured from EN8 steel of 20 mm thickness and 200 mm width, extending over the full working length of the snow plough. The cutting edge shall be securely fastened using high-strength bolts of suitable size and grade.
The scope of work shall include the supply and fabrication of the complete snow plough assembly, including the snow plough body, EN8 cutting edge, cutting edge bolts, reinforcement bolts wherever required, mounting plates, channels, reinforcing members, pins, bushes, turnbuckles, hydraulic cylinder mounting arrangements, and all other allied accessories necessary for the complete installation and satisfactory operation of the snow plough.
The work shall also include all operations such as cutting, machining, drilling, bending, rolling, welding, grinding, fitting, hoisting, alignment, and fixing in position, complete in all respects. After fabrication, all steel surfaces shall be thoroughly cleaned and prepared, followed by the application of one coat of approved steel primer and two finishing coats of approved synthetic enamel paint of the specified shade, complete in all respects. Any modifications required for proper mounting, fitment, and operation of the snow plough on the specified tractors shall be deemed included in the scope of work and shall not be paid separately.
The successful bidder shall prepare and submit the General Arrangement Drawing (GAD) of the proposed snow plough, complete in all respects for approval prior to the commencement of the jobs.
Fixed V-Type Snow Plough for Snow-Cat Sonalika 60HP (Wight = 500 ± 5% Kgs). | 1 | Job | 97,111 ₹97,111 Lowest | 1,42,000 ₹1,42,000 |
| 1.01 | Fixed V-Type Snow Plough for Snow-Cat New Holland 75HP (Weight = 500 ± 5% Kgs). | 1 | Job | 97,110 ₹97,110 Lowest | 1,41,000 ₹1,41,000 |
| 2.00 | Supply, installation, testing, and commissioning of a heavy-duty double acting hydraulic cylinder complete with piston rod, cylinder barrel, seals, end caps, mounting accessories, and all necessary fittings, designed for smooth, reliable, and efficient hydraulic operation under the specified working pressure. | 2 | No | 29,717 ₹59,434 | 25,000 ₹50,000 Lowest |
| 3.00 | Providing & Fitting of hydraulic hose pipe (min 4000 psi) 14 ft length and 1/2" Dia. The hose pipe should be crimp fitted with suitable adaptors on both ends. | 4 | No | 5,479 ₹21,916 | 4,000 ₹16,000 Lowest |
Tender Value
₹3.8 L
EMD Value
₹7,640
Closing Date
11 Aug 2026, 2:00 pmClosed
Executive Engineer MHD Handwara
Dak Bungalow Handwara
Design, Fabrication, Installation, Testing and Commissioning of V-Shape fixed Blade along with allied accessories for Snow-Cat Sonalika 60HP and Snow-Cat New Holland 75HP stationed at SCCR Bandipora.
2026_PWDJK_318012_1
MHDH/TS/2026-27/eNIT/36
Open Tender
Machineries/ Mechanical Engg Items
Item Wise
30 days
Bandipora
as per NIT
3 documents required · 3 mandatory
₹200
Yes
Executive Engineer MHD Handwara
₹7,640
5 Sept 2026
27 Jul 2026
11 Aug 2026
27 Jul 2026
11 Aug 2026
28 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Design, Fabrication, Installation, Testing & Commissioning of Fixed V-Type Snow Plough: Wedge type Fixed V blade fabricated out of MS sheets with EN8 cutting edge compatible with the Snow-Cat Sonalika 60HP & Snow-Cat New Holland 75HP. The bidder shall furnish manufacturers test certificate in support of metallurgical composition of plough sheets & EN8 cutting edge.
The fabrication of the snow plough shall be carried out using high-quality mild steel (MS) sections conforming to the relevant Indian Standards. The minimum thickness of the MS sheet used for fabrication of the snow plough mouldboard and associated components shall not be less than 4 mm.
The structural members shall conform to the following minimum requirements:
1. Mounting plates and channels: Minimum thickness 6 mm.
2. Reinforcing members (stiffeners): Minimum thickness 6 mm.
3. Top angle: 1½ inch × 1½ inch × 6 mm MS angle or equivalent.
4. Bottom angle: 3 inch × 3 inch × 6 mm MS angle or equivalent.
5. Hydraulic cylinder base support: MS square tube of size 3½ inch × 3½ inch × 8 mm thickness or equivalent.
6. Hydraulic cylinder end plates: Fabricated from 6 mm thick MS plate.
7. Turnbuckle: Minimum 40 mm diameter.
The cutting edge shall be manufactured from EN8 steel of 20 mm thickness and 200 mm width, extending over the full working length of the snow plough. The cutting edge shall be securely fastened using high-strength bolts of suitable size and grade.
The scope of work shall include the supply and fabrication of the complete snow plough assembly, including the snow plough body, EN8 cutting edge, cutting edge bolts, reinforcement bolts wherever required, mounting plates, channels, reinforcing members, pins, bushes, turnbuckles, hydraulic cylinder mounting arrangements, and all other allied accessories necessary for the complete installation and satisfactory operation of the snow plough.
The work shall also include all operations such as cutting, machining, drilling, bending, rolling, welding, grinding, fitting, hoisting, alignment, and fixing in position, complete in all respects. After fabrication, all steel surfaces shall be thoroughly cleaned and prepared, followed by the application of one coat of approved steel primer and two finishing coats of approved synthetic enamel paint of the specified shade, complete in all respects. Any modifications required for proper mounting, fitment, and operation of the snow plough on the specified tractors shall be deemed included in the scope of work and shall not be paid separately.
The successful bidder shall prepare and submit the General Arrangement Drawing (GAD) of the proposed snow plough, complete in all respects for approval prior to the commencement of the jobs.
Fixed V-Type Snow Plough for Snow-Cat Sonalika 60HP (Wight = 500 ± 5% Kgs). | 1 | Job | 1,50,000 | ₹1,50,000 |
| 1.01 | Fixed V-Type Snow Plough for Snow-Cat New Holland 75HP (Weight = 500 ± 5% Kgs). | 1 | Job | 1,50,000 | ₹1,50,000 |
| 2 | Supply, installation, testing, and commissioning of a heavy-duty double acting hydraulic cylinder complete with piston rod, cylinder barrel, seals, end caps, mounting accessories, and all necessary fittings, designed for smooth, reliable, and efficient hydraulic operation under the specified working pressure. | 2 | No | 30,000 | ₹60,000 |
| 3 | Providing & Fitting of hydraulic hose pipe (min 4000 psi) 14 ft length and 1/2" Dia. The hose pipe should be crimp fitted with suitable adaptors on both ends. | 4 | No | 5,500 | ₹22,000 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.54 MB
Tendernotice_2.pdf
PDF • 0.58 MB
BOQ_1045375.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .