Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.6 LAccepted-AOC | ₹38.6 L | L1 | Accepted-AOC Accepted due to lowest rate quoted |
| 2 | L2₹40.0 LRejected-Finance NIVADA TIVAYA ROAD TIVYA MUST BUS STOP VILLAGE KHATAULI SAHARANPUR UP 247001 | SAHARANPUR | SAHARANPUR | UP | 247001 | ₹40.0 L | L2 | Rejected-Finance Rejected due to highest rate quoted |
| 3 | L3₹41.9 LRejected-Finance | ₹41.9 L | L3 | Rejected-Finance Rejected due to highest rate quoted |
| 4 | L4₹42.2 LRejected-Finance | ₹42.2 L | L4 | Rejected-Finance Rejected due to highest rate quoted |
| 5 | L5₹45.3 LRejected-Finance C 223 MIANWALI COLONY GURGAON 122001 HARYANA | GURUGRAM | HARYANA | 122001 | ₹45.3 L | L5 | Rejected-Finance Rejected due to highest rate quoted |
| Sl No | Description | Qty | Unit | Chaudhary Constructions L2 | M/S ujjwal associates L5 | k k enterprises L3 | Goyal Enterprises L6 | M/S GEETANJALI ENTERPRISES L4 | P R Constructions L1 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed. | 1,525 | Sqm | 21 ₹32,025 | 10 ₹15,250 | 20 ₹30,500 | 21 ₹32,025 | 10 ₹15,250 | 6 ₹9,150 |
| 2.00 | Rolling and consolidating formation surface with 8 to 12 tonne power roller to required gradient and camber etc complete all as specified and as directed | 1,174 | Ten Sqm | 21 ₹24,654 | 20 ₹23,480 | 100 ₹1.2 L | 54 ₹63,396 | 50 ₹58,700 | 30 ₹35,220 |
| 3.00 | M&L for cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of path/roads / hardstanding etc complete all as specified and directed by Engineer-In-Charge | 150 | Cum | 1,919 ₹2.9 L | 2,700 ₹4.0 L | 2,800 ₹4.2 L | 2,790 ₹4.2 L | 3,000 ₹4.5 L | 2,000 ₹3 L |
| 4.00 | M&L for 20 mm thick sand cushioning including watering and consolidations etc complete all as specified and directed. | 21.8 | Cum | 699 ₹15,238.20 | 600 ₹13,080 | 600 ₹13,080 | 1,234 ₹26,901.20 | 600 ₹13,080 | 1,099 ₹23,958.20 |
| 5.00 | M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced vibro compacted any shape and size confirming to IS-15658-2006 of 80 mm thick, M- 40 grade to match with grey cement and pigment etc complete all as specified and as directed | 240 | Sqm | 745 ₹1.8 L | 800 ₹1.9 L | 650 ₹1.6 L | 790 ₹1.9 L | 750 ₹1.8 L | 650 ₹1.6 L |
| 6.00 | M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M- 35 grade to match with grey cement and pigment etc complete all as specified and as directed | 745 | Sqm | 601 ₹4.5 L | 675 ₹5.0 L | 600 ₹4.5 L | 677 ₹5.0 L | 550 ₹4.1 L | 550 ₹4.1 L |
| 7.00 | M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed | 7.83 | Cum | 3,999 ₹31,312.17 | 3,000 ₹23,490 | 4,000 ₹31,320 | 4,354 ₹34,091.82 | 4,000 ₹31,320 | 3,900 ₹30,537 |
| 8.00 | Excavation in post holes (or similar holes) in Hard /Dense soil each n exe 0.5 cu.m, gettting out, returning, filling in and ramming earth or broken rubble mixed with earth around , in layers not exeeding 25cm, watering, and removing surplus soil to a distance n exe 50 m and making good surface complete all as specified and as directed. | 70 | Each | 55 ₹3,850 | 100 ₹7,000 | 120 ₹8,400 | 60 ₹4,200 | 200 ₹14,000 | 80 ₹5,600 |
| 9.00 | S&F rolled sections, MS Angles, MS tubular Structures, MS Channels, Tee, etc. (Fe 410-W Gde-E-250 quality-A) as in main and cross beams, hip and jack rafters, purlins , posts,trusses (framed or unframed) structures where connected to common rafter and running rails and guides for sliding doors, fixed with angles clleats or other connecting plates all as specified. | 8,850 | Kgs | 85 ₹7.5 L | 90 ₹8.0 L | 85 ₹7.5 L | 94 ₹8.3 L | 80 ₹7.1 L | 80 ₹7.1 L |
| 10.00 | M&L for preparation of new surface of any description and applying two coats of synthetic enamelled paint over a coat of red oxide primer on steel surface over 10cm width or girth complete all as specifed. | 355 | Sqm | 35 ₹12,425 | 60 ₹21,300 | 45 ₹15,975 | 47 ₹16,685 | 50 ₹17,750 | 30 ₹10,650 |
Updated dates
Tender Value
₹44.7 L
EMD Value
₹89,500
Closing Date
24 Dec 2025, 6:00 pmClosed
GE (AF) GURGAON
GE (AF) GURGAON
PROVISION OF 06 X SACTIONED WORK AT AFSSR UNDER GE (AF) GURGAON
2025_MES_741536_1
GE/GUR-/NIT-89/2025-26
Open Tender
Civil Works
240 days
GE (AF) GURGAON
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) GURGAON
₹89,500
29 Jan 2026
26 Nov 2025
26 Dec 2025
26 Nov 2025
24 Dec 2025
10 Dec 2025
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
Rolling and consolidating formation surface with 8 to 12 tonne power roller to required gradient and camber etc complete all as specified and as directed
M&L for cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of path/roads / hardstanding etc complete all as specified and directed by Engineer-In-Charge
M&L for 20 mm thick sand cushioning including watering and consolidations etc complete all as specified and directed.
M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced vibro compacted any shape and size confirming to IS-15658-2006 of 80 mm thick, M- 40 grade to match with grey cement and pigment etc complete all as specified and as directed
M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M- 35 grade to match with grey cement and pigment etc complete all as specified and as directed
M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed
Excavation in post holes (or similar holes) in Hard /Dense soil each n exe 0.5 cu.m, gettting out, returning, filling in and ramming earth or broken rubble mixed with earth around , in layers not exeeding 25cm, watering, and removing surplus soil to a distance n exe 50 m and making good surface complete all as specified and as directed.
S&F rolled sections, MS Angles, MS tubular Structures, MS Channels, Tee, etc. (Fe 410-W Gde-E-250 quality-A) as in main and cross beams, hip and jack rafters, purlins , posts,trusses (framed or unframed) structures where connected to common rafter and running rails and guides for sliding doors, fixed with angles clleats or other connecting plates all as specified.
M&L for preparation of new surface of any description and applying two coats of synthetic enamelled paint over a coat of red oxide primer on steel surface over 10cm width or girth complete all as specifed.
S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engineer-in Charge
M&L for factory made pre-cast cement concrete block type B1, 1:2:4 as in kerb stone made to shape as directed, exc. 10 cm in width and setting in mortar 1:4, complete all as specified and as directed.
M&L for preparation of new stone, concrete , cement surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a priming paints plaster coat of complete all as directed and specified.
S&F 2mm thick Fibre glass reinforced translucent plain sheeting with self coach screw and rubber washer in roof, wall etc.or fixed with L-type or J-type or cranked hook bolts in lieu of screw and joints are to be covered with adhesive tape or sheet to be fixed in single sheet etc complete all as specified and directed by Engineer-In-Charge
M&L for factory made pre-cast cement concrete block type B1, 1:2:4 as in kerb stone made to shape as directed, exc. 10 cm in width and setting in mortar 1:4, complete all as specified and as directed.
M&L for preparation of new stone, concrete , cement surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a priming paints plaster coat of complete all as directed and specified.
S & F 150mm dia Mild steel sheet of 1.25mm thick eaves gutters, galvanised class 3, half round with rounded edges fixed to walls with clamps complete all as specified
M&L cement mortar (1:4) for screed bed or bedding layer of mortar 15mm thick for laying floor finishes complete all as specified and directed
M&L for exterior grade coloured,glossy finish, rubber pressed precast chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and directed
M & L PCC 1:3:6 type C-2 (Using 20 graded stone agg) as in foundation, flooring and mass concrete etc complete all as specified and directed.
M&L for exterior grade coloured glossy finish designer Endura parking tiles of size exc 0.08 sqm not exc 0.36 haivng thickness 8/10mm thick set jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / color /matrix incl M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and directed comp all as specified and difrected
Designing providing and fixing 3mm thick Aluminium Composite Panel Cladding over MS frame either segmental/straight in plan fixed with SS serews, silicon sealants filled whereever required on vertical joints, complete the work in all respect including all necessary accessories. At all soffits aluminium cladding shall be bend 90 degree and joints at corner or edges will not be acceptable. On horizontal surface, the size of sheet should be maximum available of size complete all as per manufacturer's specifications and as directed.
S&F for 5 to 7mm hollow, PVC Wall / Ceiling Panneling printed in any colour PVC sheet inclusive of solvent cement and fixing at site on PVC Frame or Aluminium frame as per specification complete all as specified and as directed.
Dismantling ceiling board (fiber, pulp insulation) or insulation board/slabs etc including grid work/wooden or aluminium frame works, cover fillet, wall lining, etc complete all as specified and as directed.
S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding mild steel frame work using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed by Engr-in-charge.
M&L for perforated particle board/tiles 12mm thick for insulation and accoustic purposes, 60x60 cm in size, fixed with nails to timber frame work or withstaples on snap grid complete all as specified and as directed by Engr-in-charge.
S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing .(Note : Colour & Pattern as approved by Engr-in-Charge)
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises
M&L for Vitrified tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm , in floors, dado , skirting etc. set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match and incl dismantling / demolition and rubbish off the primises etc complete all as speciefied and directed.
Taking down cement plaster on brick or stone or concrete surfaces of walls/ceilings etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and as directed.
M&L for rendering 5 mm thick in CM (1:3) on concrete ceiling surface etc complete all as specified and as directed
M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed
M&L for preparing new plastered surface of walls/ceilings and applying two coats of oil bound distemper over one coat of white wash complete all as specified and as directed
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
M&L for point wiring complete with stranded copper conductor 1.5 Sqmm size (Nominal area) PVC insulated unsheathed FRLS Grade cable 1100 volts grade confirming to IS: 694 for phase and neutral drawn in and including medium duty concealed PVC conduit confirming to ISI marked not less than 20mm dia with concealed sunk-in pressed steel terminal boxes of required size not less than 1.2 mm thick factory made and painted with stove enamelled black paint top cover 2.80 mm thick plastic laminated sheet of required colour fixed with brass screwes and cup washers including single core stranded copper conductor 1.5 Sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for the following :-
One light point controlled by one, one way switch with cables 1.5 Sqmm size all as specified and directed.
One 5 pin socket oulet 5/6 amps on same board including single core stranded copper conductor 1.5 sqmm PVC insulated and unsheathed cable drawn in same conduit as earth wire to the common earth and connecting to earth dolly all as specified.
Supply and fix in switch piano, flush type single pole, one way, 5 Amps, 240 volts, ISI marked complete all as specified and as directed.
Chaudhary Constructions (BID ID -3499278)
k k enterprises (BID ID -3502152)
M/S GEETANJALI ENTERPRISES (BID ID -3507123)
M/S ujjwal associates (BID ID -3500360)
Goyal Enterprises (BID ID -3507022)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.16 MB
TenderDocuments89.pdf
Tender Documents • 0.62 MB
BOQ_830342.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid