SPECAIL REPAIR TO BLDG P-97 AT 14 FAD AND PROVN OF 11 NOS OF CHIMNEY AT OFFRS MD ACCOMMODATION AT NARANGI MIL STATION UNDER GE NARANGI

Material and labour for Plain cement concrete (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in back filling,hold fast etc in pressed steel door and window frame or fixing the hols fast etc complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed.

Supply and fix 30 mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both side complete all as specified and as directed.

Supply and fix 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and as directed.

Supply and fix 100 mm size stainless steel butt hinges, complete all as specified and as directed.

Supply and fix 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed

Supply and fix 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

Supply and fix stain-less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples complete all as specified and as directed.

Providing and fixing powder coated aluminium (minimum thicknesss of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make confirming to IS-733 and IS- 1285, fixed with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws, locking system all complete all as specified and directed.

Supply and fix Pressed steel frames for doors of size 125mmx60mmx1.25mm with double rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed complete all as specified and directed.

Supply and fix Pressed steel frames for doors of size 105mmx60mmx1.25mm with single rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed complete all as specified and directed.

Supply and fix box type steel windows with side hung shutters both mosquito proof and glazed shutter including projecting type hinges with steel handle and steel peg stay with glazing bars and 12 mm square bar or ground bar of approved design welded to steel window frame dovetailed or welded complete all as specified and as directed.

Supply and fix steel ventilators with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

Material and labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction in truss purline post butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

Supply and fix rolled mild steel plates ( plain or chequrred) channels, 5mm thick or over square cut or notched ( ordinary or counter sunk) forming holes, without any attachment confirming to Fe-410-W (Gde-E-250) quality A complete all as specified and directed.

Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm and n exc 10cm long 11 to 15mm dia of shank complete all as specified and directed.

Supply and fix mild steel Framed work such as grills, gratings, angle iron, mild steel sheets, mild steel round bar, MS flat iron etc.. for chowkhats or doors shutters or windows etc with ends of bars shouldered and/or riveted, wlded or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as complete all as specified and as directed.

Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as specified and as directed Note: To be executed for provison of ridges and hips, valley etc complete all as specifed and as directed

Material and labour for fix in repair of suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600mm x 4mm thick with main runner 32 mm x 24 mm, 0.7mm thick, cross runner 24mm x 24mm 0.7mm thick and wall angle 24mm x 24mm with GI powder coating at bottom of runner and wall angle in a grid of GI system duly suspended with 3mm dia GI wire fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid as specified in SSR Part-II 2020(Rates) complete all as specifed and as directed

Material and labour for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top: (i) Taking out old roof tratment and roughening tha same old concrete slab by picking, sweepingc clean and washing down with water to remove dust etc (ii) Screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying as in roof slab with mixing of WPC and surface finished fare and smooth without using extra cement (WPC shall be measured and paid seperately) (iii) Cleaning the plastered roof surface and applying one coat of cold bituminuous primer @ 0.25 ltr/Sqm confirming ti IS: 3384 -1986 (iv) APP based polymeric menbrane 3mm thick (minimum) weighing 3.5 kg/Sqm reinfiorced with polyster non woven fabric (weighing not less than 160gms/Sqm) shall be less appliedb over bituminous primer as specified above over a application of polymeric membrane shall by torch application. The overlaps shall be minimum 100mm on the teransverese direction and 75mm on longitudinal direction

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm on vertical surfaces as skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles over 10mm thick rendering in CM 1:4 complete all as specified and directed.

Material and labour pre-polished cement concrete chequered tiles area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm and 22-25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6) complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 18-20 mm thick over cement screed base 20 mm in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material and labour for machine cut Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with including 10mm thick rendering in CM 1:4 etc set and jointed in neat cement slurry complete all as specified and directed.

Material and labour for Mirror polishing 20 mm thick Granite (of any type) tiles with high gloss finish machine cut, in floor etc laid over cement screed and jointed with grey cement slurry and pointing with white cement with admixture of pigment to match the shade of granite stone including grinding & necessary polishing & over 15 mm thick screed with 1:6 CM complete all as specified and directed.

Material and labour for Mirror polishing 20 mm thick Granite (of any type) tiles with high gloss finish machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry and pointing with white cement with admixture of pigment to match the shade of granite stone including grinding & necessary polishing & over 10 mm thick screed with 1:4 CM complete all as specified and directed.

Material and labour for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

Material and labour for 100 mm thick PCC 1:2:4, type B2 (using 40 mm graded crushed stone aggregate) as in path / paving / hard standing / floor and finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 40 mm thick PCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in floor, finished the surface even and rough without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using exta cement with using liquid WPC @200 ml/50 kg wt cement. WPC shall be measured and paid seperately.

Supply only approved liquid water proofing compound.

Material and labour for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 5mm thick in cement mortar 1:3 on fair faces of brick/concrete surfces as in ceiling finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of newly plastered surface of walls and applying two coats of acrylic distemper over a coat of primer over 1 mm thick wall care putty complete all as specified and as directed.

Material and labour for complete removal of the existing treatment of wall and applying two coat of oil bound distemper over a coat of primer over a coat of 1 mm thick wall care putty complete all as specified and as directed.

Material and labour for preparation of newly plastered surface of ceiling and applying three coats of white wash including preparation complete all as specified and as directed.

Material and labour for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of old decorated wall surface and applying one coat of white wash complete all as specified and directed.

Material and labour for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

Material and labour for preparation of new exterior cement/concrete surfaces and applying two coat of acrylic exterior weather coat paint (Weather proof paint with quality of dust guard, anti algal and anti fungal paint with minimum 05 years performance warranty, over a coat of approved primer of same manufacturer over a coat of 1 mm thick wall care putty complete all as specified and directed.

Material and labour for complete removal of the existing treatment of wall and applying two coat of acrylic exterior weather coat paint (Weather proof paint with quality of dust guard, anti algal and anti fungal paint with minimum 05 years performance warranty,over a coat of approved primer of same manufacturer over a coat of 1 mm thick wall care putty complete all as specified and directed.

Supply and fix 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fixed frosted glass 4 mm thick ordinery quality and glazing with oil putty in sqaure n exc 0.50 sq. m in each pane complete all as specified and directed.

Material and labour for preparation of new or previsously untreated steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified as directed .

Material and labour preparing old treated steel and Iron surfaces of any description, not otherwise described, over 10 Cm width or girth and applying one coat of synthetic enamel paint (First quality), complete all as specified and as directed.

Supply and fix in repairs, 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair 110 mm dia PVC (SWR) bends any radius complete all as specified and as directed.

Supply and fix in repair 110 mm dia PVC (SWR) bends with access door any radius complete all as specified and as directed.

Supply and fix in repair 110 mm bore PVC (SWR) junction single, (single T)equal provided with access door complete all as specified and as directed.

Supply and fix in repairs, 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed

Supply and fix in repairs, 110 mm CP grating complete all as specified and as directed.

Demolition of concrete exc 15 cm thickness as in sunken floor and also removing the debris to the out side of MD land

Demolition of plain cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillar including coping etc. complete all as specified and as directed.

Dismantling of stone slabs and tiles of andy description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar .

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm including builders hardware each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed.

Taking down shutter of any description area exc 1 sqm but n exc 2 Sqm each including builders hardware complete all as specified and as directed.

Dismantling of asbestos cement sheet (Corrugated semi corrugated etc) as in roof covering complete all as specified and as directed

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

Taking down carefully aluminium/ copper point wiring for light/fan/ socket/bell or power point incl. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete removing materials to store for keeping in safe custody site or handed over to contractor as schedule of credit and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Taking down ceiling/exhaust/wall fan including connection wires carefully and deposit to MES store in safe custody complete all as specified and as directed.

Material and labour for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathed FRLSH cable, 1100 volts grade IS-694 marked, with multistranded copper conductors and earth continuity wire with 1.5 Sqmm copper conductor cable (including connecting to earth dolly) laid/fixed with and including PVC rigid conduit on walls/ceiling (concealed), with MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulators etc. including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for one light or fan point controlled by one 5 Amp switch one way complete all as specified and as directed.

All as per item serial No 71 here-in-before but One 3 pin socket outlet 6 amps on the same board with other switches complete all as specified and as directed.

All as per item serial No 71 here-in-before but One socket outlet 3 pin 6 Amp on independent board complete all as specified and as directed.

All as per item serial No 71 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable complete all as specified and as directed.

Supply and fix switch modular type 6 Amp 240 Volts single one way (ISI marked) complete all as specified and as directed.

Supply and fix modular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and as directed.

Supply and fix modular switch 1 way 16 amp, 1 module complete all as specified and as directed.

Supply and fix modular socket, 16 Amp 2/3 pin combined, 2 module complete all as specified and as directed.

Supply and fix stepped type modular electronic fan regulator, two module size, flush type complete all as specified and as directed.

Supply and fix ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and as directed.

Supply and fix modular lamp holder ,PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC decorative batten type connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix in repair LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fix in repair MCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed.

Supply and fix in repair MCB DB of sheet metal enclosure double door IP-43 SPN 8 way with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed.

Supply and fix in repair MCB DB of sheet metal enclosure double doorIP-43 SPN 4 way with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed.

Supply and fix in repair MCCB four pole 100A, Icu 16KA, thermal magnetic, 415v AC complete all as specified and as directed.

Supply and fix in repair MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and as directed.

Supply and fix in repair MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply, fixing and testing of Storage type electric water heater of capacity 25 ltrs with BEE 5 star rated, 230 V, maximum power consumption 2 KW, Drypower Fero Glas caoting Technology for inner container and Heavy Duty seamless Incoloy 800 Glass lined heating element, vertical wall mounting complete with all accesories and PVC connecting pipe with whirl technology 15 mm bore 450mm long 2 Nos for hot and cold water supply with two years warrenty on product and 5 years warranty on inner container.complete all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450m sweep, 1400 rpm with blades, and frame and louvers complete all as specified and as directed.

Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 complete all as specified and as directed.

Supply and fix in repair LED 60 W building secruity light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 43 mm complete all as specified and directed.Make -Havells/ bajaj/Magik/crompton etc.

Material and labour for building secruity light bracket made out of 40 mm bore light grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed.

Material and labour for wiring with 2 runs of 6 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith single run of 6 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and type of conduit complete all as specified and directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit.

Supply and fix steel tubes medium grade galvanised 25 mm bore with all fittings and fixed complete to walls and ceilings and laid in floors complete all as directed.

Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25mm bore complete all as specified and directed

Material and labour for cutting existing steel tubing of 40mm for alterations or additions complete all as specified and directed

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 4 core complete all as specified and directed

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Supply and spreading clean dry river sand in cable trenches as in cable cushioning complete all as specified and as directed. (Note: Punned thickness shall be measured and paid)

M&L for bricks sub class ‘B’ brick old size for cable protection laid in flat in trenches over the cable perpendicular to the direction of cable complete all as specified

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and directed.

Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed.

Material and labour for taking out existing exhaust fan and closing the hole and refixing the exhaust fan to the other loaction and opening of hole through out the wall as suitable for exhaust fan of size upto 300mm sweep and making good to disturbed surface complete all as specified and as directed.

Supply and fix wall mounted fully automatic domestic type Electric chimney 250W in size range from 60 cm to 90 cm hood for 2-3 gas burners of suction capacity 700-1200 mtr cube/hr, glass front and top touch mettalic corrosion resistant GI powder coated , touch control(dual) ,noise level 58 Db, gesture control, 3x3 Layer baffle filter including all connecting accessories,fitting and fixtures all as specified and directed by engr-in -charge .Note:- work for fitting of chimney including hole of suitable size for outlet will be done by contractor without any extra cost.

Please Enable Macros to View BoQ information