Painting the existing security fencing inside Green Gate and Red Gate in VOC Port

Amount

WORK A - Painting the existing perimeter security fencing over SBW & EBW and from Green Gate to Red Gate area at inside Green Gate in VOC Port

Removing the old paint and rust from steel structure by manually using power tools/hand tool, steel wire brush and sand paper and applying one coat of Rust-O-Cap self primer (DFT 100 microns ) over steel structure and one coat of Epoxy MIO for intermediate (DFT 100 microns) and two coats of polyurethane - Apcothane CF 675 paint ( DTF 35*2= 70 microns) of using different shades after scrapping the old paint, rust and throughly cleaning the steel surface etc., complete and as per the direction and satisfaction of the Departmental officers. The rate inclusive cost of all materials, labours and T&P etc complete and as directed by the departmental officers.

Supplying the structural steel, MS Flats, Square Rods, Angles, Channels etc., for vertical members / bracing /stiffeners / Base plates or for any other usage as a structural member, fabricating, welding and erecting the frame work in position at the locations shown in the drawing including all labour, materials, conveyance, tools & plants, etc., complete and as directed by the departmental officers (Note : 1. While fabricating, necessary holes and bolt & nut shall be provided at no extra cost in the structural members. 2. In case, the specified MS section is not available in the market, the nearest alternative section may be used after approval of the Engineer).

Plastering the Brick work 15 mm thick in Cement Mortar 1:5 (Plastering Sand (P-Sand)) (One cement, five Plastering Sand (P-Sand)) for all faces of walls (even and uneven) in all floors upto full height of the building including necessary scaffolding, racking of masonry joints, cleaning, curing etc., complete complying with AISS and as directed by the departmental officers.

Providing Form work including centring, shuttering for foundation footings of columns, mass concrete so as to give a rough finish shuttering and propping etc., complete complying with AISS and as directed by the departmental officers.

Providing and laying Plain Cement Concrete 1:1.5:3 (One part of cement, One and a half parts of Coarse sand & Three Parts of graded stone aggregate (i.e.) 2 parts of 20mm nominal size graded metal & 1 part of 10mm nominal size graded metal) for RCC works using 20 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., complete complying with AISS and as directed by the departmental officers.

Applying One coat of Alkali Resistant Primer and Two coats of APEX - Exterior Emulsion Paint of approved colour and quality over the New wall surface in all floors to give an even shade after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand paperes smooth including all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers.

Supplying and fixing of G.I. Barbed wire 10 gauge (6Rm. / Kg.) two ply three points confirming to I.S. Code No. 278 -1962 Type - I, straining and fixing to any type of standard rails, straining bolts including securing with and provision of galvanised mild steel wire, stapples or steel pins etc., for horizontal and tying with the fencing / M.S angle post using G.I steel wire including all materials, labour, tools etc., complete complying with AISS and as directed by the departmental officers.

WORK B - Painting the existing security fencing at inside the Red Gate area in V.O.Chidambaranar Port Authority

Removing the old paint and rust from steel structure by manually using power tools/hand tool, steel wire brush and sand paper and applying one coat of Rust-O-Cap self primer (DFT 100 microns ) over steel structure and one coat of Epoxy MIO for intermediate (DFT 100 microns) and two coats of polyurethane - Apcothane CF 675 paint ( DTF 35*2= 70 microns) of using different shades after scrapping the old paint, rust and throughly cleaning the steel surface etc., complete and as per the direction and satisfaction of the Departmental officers. The rate inclusive cost of all materials, labours and T&P etc complete and as directed by the departmental officers.

Plastering the Brick work 15 mm thick in Cement Mortar 1:5 (Plastering Sand (P-Sand)) (One cement, five Plastering Sand (P-Sand)) for all faces of walls (even and uneven) in all floors upto full height of the building including necessary scaffolding, racking of masonry joints, cleaning, curing etc., complete complying with AISS and as directed by the departmental officers.

Applying One coat of Exterior (APEX) of approved quality over the existing wall surface in all floors to give an even shade after thoroughly brushing the surface clean of all grease, dirt, loose pieces of scales and also including preparing the surface even and sand paperes smooth including all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers.

Supplying and fixing of G.I. Barbed wire 10 gauge (6Rm. / Kg.) two ply three points confirming to I.S. Code No. 278 -1962 Type - I, straining and fixing to any type of standard rails, straining bolts including securing with and provision of galvanised mild steel wire, stapples or steel pins etc., for horizontal and tying with the fencing / M.S angle post using G.I steel wire including all materials, labour, tools etc., complete complying with AISS and as directed by the departmental officers.

GPS Enterprises (BID ID -845257)

P.MEERAZA (BID ID -845573)

Shri Venkateswara Constructions (BID ID -843371)

SREE TRS CONSTRUCTION (BID ID -845605)