Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.2 LAccepted-AOC 93 SOUTH ZONE COIMBATORE CORPORATION | ERODE | TAMIL NADU | 638459 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹4.2 L+₹2,374.12 (0.57%)Rejected-AOC | L2 | Rejected-AOC Rejected |
Tender Value
₹5 L
EMD Value
₹5,000
Closing Date
23 Jul 2024, 3:00 pmClosed
Assistant Commissioner, South Zone
South Zone, Coimbatore Corporation, Kuniyamuthur, Coimbatore 641008
Construction of Compound wall for Community toilet at Karuparayan koil street in Ward no. 99 ,South Zone ,Coimbatore Corporation.
2024_MAWS_462177_36
e1/SouthZone/2024
Open Tender
Civil Works
Works
90 days
South Zone, Coimbatore Corporation
As per the tender condition attached
3 documents required · 3 mandatory
₹0
₹5,000
26 Aug 2024
12 Jul 2024
24 Jul 2024
13 Jul 2024
23 Jul 2024
13 Jul 2024
Amount
Earth work excavation in all soils and Sub Soils with initial lead and lift including all Labour Charges as per the Direction of the Departmental officers etc. complete.
Providing Pile foundation of size 300 mm dia using augur including labour charges and all other tools and plants charges with all labour charges as per the direction of dept. off. Etc. complete.
Cement concrete 1:4:8 mix ( One Cement, Four Sand, Eight Aggregate)using 40mm size HBG metal from approved quarry Complying with Standard Specification etc. complete
Supplying and erecting in the position of centering for sides and soffits including necessary supports and strutting with all cross bracings using mild steel sheet boarding etc., completed
5.5cement, one and half parts of sand , three parts of 20 mm hard blue granite metal by volume, characteristic strength not less than 20 N/sqmm) machine mixed for all reinforced Cement Concrete works, including scaffolding, cost of all materials, machine mixing, vibrating, lifting, curing, labour charges for laying & finishing etc., but excluding the cost and fabrication of reinforcements and also excluding centering and formwork etc., complete complying with the relevant standard specifications at all leads inside the building.
Supplying and fabricating of reinforcement steel of all diameters for reinforced cement concrete works at all heights and depths including straightening, cleaning,cutting,ending, placing in position and binding, hoisting and welding if any including cost of power, electrodes etc, cost of annealed binding wire (18 gauge), providing overlaps, tying in position and providing necessary cover blocks for all works as per detailed drawings supplied (including chairs, cranks, lap rods, spacer bars, fan hooks etc.,) with the relevant standard specifications, complete for all leads & lifts.
Cement concrete of 1:2:4 mix (One part of cement, two parts of sand and four parts of course aggregates by volume) using granite hard broken stones of 20mm for flooring concrete laid in layers of not more than 10cm thick complete complying with standard specification and drawings as directed by the engineer including all cost and conveyance of materials laying curing etc., complete.
Fly ash Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT
Providing Solid Block in Cement mortar 1:5 mix using I St Class Solid Block as per the direction of the departmental officers etc., complete.
10.Supply fabrication and erection of truss and gates using M.S tubular pipes cpst including painting one coat primer and two coats of enamel paint including all labour and material charges ..etc. complete
Painting with first quality emulsion paint two coats over a priming coat including through cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed.
Painting with enamel paint two coats for new iron works over a base coat etc complete
Plastering in Cement mortar 1:5 mix using 12mm thick over Wall Surface etc., complete
Providing of Precast compound wall using Panel / Plank Specification of 3mm PPC steel- High-tensile per set, with the stressing system (4-pieces in each panel) height: 300mm, length: 2100mm, Thickness: 50mm and Column / Post Specification of 3mm PCC Steel-High-tensile with Stressing System (7- pieces in each column) Length of the column depends on the requirement and size is 150×150 mm width including all labour and material charges ..etc. complete
Writing for Arch name board and side wall lettering as per standard specifications etc.,
Add :- GST @ 18%
PERUMAL (BID ID -1090657)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_549591.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .