COMPREHENSIVE AND PREVENTIVE MAINT OF VARIOUS LAUNDRRY PLANTS, BOILER AND EQUIPMENT INCLUDING CONNECTED ITEMS AT AHRR UNDER GE EM RR HOSPITAL DELHI CANTT 10

Amount

M&L for Comprehensive, preventive and periodical maint of Various Eqpts of Laundry plants comprising of opening, dismantling of the machine using adequate labour and disconnecting all steam / water and electrical connection, cleaning / servicing of steam heating coil, steam trap, in reliable, smooth and efficient manner using latest techniques & OEM guideline for monthly/ yearly maintenance, servicing/ lubricating/greasing and adjusting the mechanical and electrical driving equipment, shaft assembly, bearing / contact, governor jaws in and including change of lubricating oil,grease,all rubber gaskets/ packing of all equipments and oil seales as per OEM make and replacement of all kinds of minor defective / spares parts i.e. wire, lugs, nut, bolts,screw etc and all machine work i.e. welding, cutting, drilling, lath work etc as and when required, in and including repair/replacement of defective spares parts as mentioned in Sch - ‘A’ here-in-after as 'supply only' to entire satisfaction of Engr-in-charge, complete all as specified and directed for the followings equipments :- (i) Washer Extractor upto 120 Kg capacity of Make : Fabcare – 05 Nos. (ii) Washer Extractor upto 60 Kg capacity of Make : Fabcare – 01 Nos, (iii) Washer Extractor upto 100 Kg capacity of Make : Stefab – 03 Nos, (iv) Flat work ironer machine of Make- Fabcare-02 (v) Flat Bed press of Make- Fabcare/Stefab-04 (vi) Dry Clean machine -01 Nos. Note : (i) Cost of Repair/replacement of Spare parts other than mentioned in Sch A item No 02 to 35 here-in-after shall be deemed to be included in quoted rate. (ii) All the complaint(s) will be rectified within 02 hrs from the time of receipt of complaint. If, contractor fails to attend the complaint within 02 hrs from the time of receipt of complaint, the penalty of Rs. 500.00 (Rupees Five Hundred only) per complaint per hr for first 04 hrs and after that Rs. 1000.00 (Rupees One Thousand only) per complaint per hr shall be recovered from the contractor’s dues. (iii) The cost of transportation (to and fro) and other necessary equipment shall be arranged / brought by contractor to complete the job and no extra cost shall be paid to the contractor in this effect.

Supply and Fixing, in replacement of Main bearing set of size (6322,2RS and 6323,2RS) (Big & Small bearing) suitable for Washer Extractor of 120 Kg capacity ID-125,OD -160 and thickness 13 mm complete all as directed.

Supply and Fixing, in replacement of Main bearing seal set of silicon suitable for Washer Extractor of 120 Kg capacity complete all as directed.

Supply and fixing, in replacement of main bearing circlip suitable for washer extractor of 120 kg capacity complete all as directed.

Supply and fix in replacement shaft suitable for 120 KG wahing extractor as per existing shape and size all as specified and directed.

Supply and fix shaft suitable for 100 KG wahing extractor as per existing shape and size including taking down old U/S one all as specified.

Supply and fix shaft suitable for 50/60 KG wahing extractor as per existing shape and size including taking down old U/S one all as specified and directed by Engr-in-Charge

Supply & fixing, in replacement of display controller (AXW) suitable for Washer Extractor of 120 / 60 Kg capacity Fabcare/Stefab complete all as directed.

Supply only, in replacement of Main Water Inlet Valve/Main drain Valve (Actuator Butterfly Valve) of size 100 mm suitable for Washer Extractor of 120 Kg capacity complete all as directed.

Supply only, in replacement of Main Steam Inlet solenoid Valve of size 25 mm suitable for Washer Extractor of 120 Kg capacity complete all as directed.

Supply Only in replacement of V-belt of size B-128 complete set (05 Nos) suitable for Washer Extractor of 120 Kg capacity complete all as directed.

Supply only in replacement of SS flexible Hose, pressure/ Temp rating 7 Kg/cmsqure /1000 digricentigrate of size1" dia and 2.5 M long for steam inlet suitable for Washer Extractor of 120 Kg capacity complete all as directed.

Supply and Fixing, in replacement of SS flexible Hose,pressure/ Temp rating 7 Kg/cmsqure /1000 digricentigrate of dia 2" and 2.5 M long for water inlet suitable for Washer Extractor of 120 Kg capacity , complete all as directed.

Supply only, in replacement of PVC pneumatic pipe complete all as directed.

Supply only, in replacement of PVC pneumatic pipe fitting i.e. tee, elbow, connector etc , complete all as directed.

Supply only V-belt of size A-57 suitable for Flat Work Ironer Machine.

Supply only, in replacement of SS flexible Hose of 2 ¼" size, 1 M long suitable for Washer Extractor of 120 Kg capacity complete all as directed.

Supply only, in replacement of Rubber hose pipe of 4" size, 1 M long suitable for Washer Extractor of 120 Kg capacity complete all as directed.

Supply only, in replacement of Pneumatic FRL set suitable for Washer Extractor of 120 Kg capacity / Flat Work Ironer Machine complete all as directed.

Supply only, in replacement of LN key bolt for main housing suitable for Washer Extractor of 120 Kg capacity, complete all as directed.

Supply only, in replacement solenoid valve suitable for washer extractor any capacity complete all as directed.

Supply only, in replacement of pneumatic cylinder door lock suitable for Washer Extractor of 100/120 Kg capacity complete all as directed.

Supply only, in replacement of main shocker suitable for Washer Extractor of 120 Kg capacity including nut,bolt and washer complete all as directed.

Supply only, in replacement of main spring heavy duty suitable for Washer Extractor of 120 Kg capacity complete all as directed.

Supply only, in replacement of door lock latch handle suitable for Washer Extractor of 120 Kg capacity complete all as directed. As per existing sample.

Supply only, in replacement of thermo couple (TC) suitable for Flate bed press/Washer Extractor of 100 Kg capacity complete all as directed.

Supply only, in replacement of flannel cloth and covers suitable for Flat Work Ironer Machine complete including anchoring iron rod clip all as directed.

Supply only, in replacement of final cover as per existing make and type suitable for Flat Work Ironer Machine complete all as directed.

Supply only, in replacement of conveyor belts with hook & pin suitable for Flat Work Ironer Machine.

Supply only, in replacement of guide tape suitable for Flat Work Ironer Machine complete all as directed.

Supply only, in replacement of main bearing set roller suitable for Flat Work Ironer Machine complete all as directed.

Supply only, in replacement of V-belt of size A-46 suitable for Flat Work Ironer Machine complete all as directed.

Supply only, in replacement of temperature meter of dia 2" and Temp Rating 0-200 Digricentigrate for Flat Work Ironer Machine complete all as directed.

M & L padding for Flat belt Iron work 100% polyester fiber with a higher temprature resistance sutable for long roller and working more than 2500 hrs all as specified and directed by Engr-in-Charge.

M&L for dismantling of housing for repair and refixing the same after repair, balancing, lathe work, transporting to and fro complete all as specified for washer extractor 100/120 kg.

M&L for comprehensive maintenance/Over hauling of Drying Tumbler of capacity mentioned as under, comprising of opening, dismantling of the machine using adequate labour and disconnecting all steam / water and electrical connection, balancing / alignment of cylindrical basket, remattling the shaft by taking it to the lathe work shop, cleaning / servicing of steam heating coil, steam trap, replacing all defective spares parts / items mentioned in Schedule as 'supply only' and reassembling all dismantled part/items after carrying out necessary repair as required, including cleaning, servicing, oiling, greasing etc, making all water/steam connection and electrical connection, leak testing at desired pressure, with and including testing, commissioning of Drying Tumbler Machine at optimum efficiency as per service manual or as per manufacturer standard, monthly/yearly complete all as directed and required at site. (i) Drying tumbler 60 Kg Make- Fabcare-04 (ii) Drying tumbler 50 Kg Make-Stebfab-03 Note:- The cost of transportation( To & Fro) is deemd to be included in quoted rates. Repair/replacement of Spare parts other than mentioned in Sch A item No 37 to 63 here-in-after shall be deemed to be included in quoted rate.

Supply and fix Drum shaft (Big) suitable for 50/60 KG Dry Tumbler as per existing shape and size including taking down old U/S one all as specified and directed by Engr-in-Charge

Supply and fix Belt driven shaft (Small) suitable for 50/60 KG Dry Tumbler as per existing shape and size including taking down old U/S one all as specified and directed by Engr-in-Charge

Supply only, in replacement of Steam Heating Coil having Copper Tube with Aluminium Fins suitable for Drying Tumblers of 60 Kg capacity complete all as directed.

Supply only, in replacement of V-belt of size A-102 of main drive suitable for Drying Tumblers of 60 Kg capacity complete all as directed.

Supply only, in replacement of V-belt of size B- 82 suitable for Drying Tumblers of 60 Kg capacity complete all as directed.

Supply only, in replacement of steam trap suitable for Drying Tumblers of 60 Kg capacity complete all as directed.

Supply only, in replacement of main drive bearing of size-2210 alongwith sleeves suitable for Drying Tumblers of 50/60 Kg capacity complete all as directed.

Supply only, in replacement of idler drive bearing of size-2213 alongwith indler sleeves suitable for Drying Tumblers of 60 Kg capacity complete all as directed.

Supply only, in replacement of Door Latches for lint screen suitable for Drying Tumblers of 60 Kg capacity complete all as directed.

Supply only, in replacement of door limit switch suitable for Drying Tumblers of 60 Kg capacity complete all as directed.

Supply only, in replacement of main door lock suitable for Drying Tumblers of 60 Kg capacity complete all as directed.

Supply only, in replacement of Timer 0-60 sec time delay suitable for Drying Tumblers of 60 Kg capacity complete all as directed.

Supply only, in replacement of timer rev-fwd action suitable for Drying Tumblers of 60 Kg capacity complete all as directed.

Supply only, in replacement of Digital temperature controller suitable for Drying Tumblers of 60 Kg capacity / flat bed press complete all as directed.

Supply only, in replacement of padding set suitable for Flat bed Press complete all as directed.Make: As per existing sample.

Supply only, in replacement of main bearing suitable for Flat bed Press complete all as directed.

Supply only, in replacement of flow control valve of size 1/2' inch (15mm)suitable for Flat bed Press complete all as directed.

Supply only, in replacement of air valve of size 15 mm for manual control suitable for Flat bed Press complete all as directed.

Supply only, in replacement of steam supply valve of size 20 mm suitable for Flat bed Press complete all as directed.

Supply only, in replacement of steam trap TD-3 type of size 25 mm suitable for Flat bed Press complete all as directed.

Supply only, in replacement of timer GIC type suitable for Flat bed Press complete all as directed.

Supply only, in replacement of SS flexible steam inlet pipe of size 20 mm suitable for Flat bed Press complete all as directed.

Supply only, in replacement of white nipples suitable for Flat bed Press complete all as directed.

Supply only, in replacement of Red / green push button, complete all as directed.

Supply only, in replacement of indicator lamp, complete all as directed.

S&F in repair spring for flat bed press complete all as per existing make and type.

S&F in replacement taflon air pipe complete all as per existing make and type.

M&L for comprehensive maintenance/overhauling of Hydro extractor capacity of 25 Kg (Make - Stefab) - 03 Nos, comprising of opening, dismantling and disconnecting all electrical connection, balancing / alignment of cylindrical basket, balancing of blower, shaft turning, cleaning / servicing of steam radiator, replacing all defective spares parts / items mentioned in Price Schedule as 'supply only'. The work include taking down of 3 Ph induction drive motor and neccessary turning & grinding of motor rotor and reassembling all dismantled part/items after carrying out necessary repair as required, including cleaning, servicing, oiling, greasing etc, making all water connection and electrical connection, leak testing at desired pressure, with and including new control wiring and testing, commissioning of Hydro extracor at optimum efficiency as per service manual or as per IS standard, complete all as directed. Cost of Repair/replacement of Spare parts other than mentioned in Sch A item no 65 to 70 here-in-after shall be deemed to be included in quoted rate.

Supply only, in replacement of, transformer of 15 Amp capacity suitable for Hydro Extractor of 25 Kg capacity complete all as directed Make: As per existing sample.

Supply only, in replacement of Buffer suitable for 25 Kg Hydro extractor Complete all as specified Make: As per existing sample.

Supply only, in replacement of Oil seal suitable for 25 Kg Hydro extractor Complete all as specified .Make: Everest

Supply only, in replacement of Limit switch suitable for 25 Kg Hydro extractor Complete all as specified. Make: Seimens/Schenider.

Supply only, in replacement of Spring suitable for 25 Kg Hydro extractor (Make : Stefab) Complete all as specified. Make: As per existing sample.

S&F in replacement rectifier and element for hydro extractor complete all as specified.

Servicing of existing Screw/Reciprocating type air compressor of any make/ model, by engaging sufficient man power and suitable T&P to ensure safety of plant as well as working persons including disconnecting of air / electric connections, dismantling of air compressor by unscrewing/ cutting of screws, nuts & bolts etc, dismantling of air filter, unserviceable parts / items, air receivers, moisture separator, air suction silencer and fixing the new spare part as given below, replacing complete oil with new oil of recommended Make & grade, adjusting / balancing the compressor parts/items including all machine works i.e. welding, cutting, drilling etc as and when required and reassembling the compressor, making electric connection and testing for leakage, required air pressure & suction temperature etc, complete all as directed. Note (i) All other The cost of transportation (to and fro) and other necessary equipment shall be arranged / brought by contractor to complete the job and no extra cost shall be paid to the contractor in this effect. (ii) Cost of Repair/replacement of Spare parts other than mentioned in Sch A item No 72 to 83 here-in-after shall be deemed to be included in quoted rate. (i) The air compressor will be handed over to contractor in as and where condition. Hence, the bidder is advised to visit the site to assess the quantum of work to be carried out in this contract. No claim on condition of Air Compressor will be accepted at later stage and bidder is deemed to have visited the site to ascertain the condition of Air Compressor. (iii) The cost of any spare part (s), other than specified here-in-above and which are essential to be replaced for smooth working of compressor is deemed to be included in quoted rates and no extra cost shall be paid to the contractor on this account. (iv) The cost of all kind of repair including minor items i.e. wire, lugs, nut, bolts, screws etc, is deemed to be included in quoted rates and no extra cost shall be paid to the contractor on this account. (v) The entire work shall be carried out by the OEM or auth dealer of the OEM only.

Supply only Crank shaft

Supply only cylender sleeve LP +HP

Supply only piston LP+HP

Supply only Piston ring LP+HP

supply only Fingar Valve LP+HP

Supply only Air filter Assy

Suuply only NRV Assy 3/4"

Supply only Bearing

Supply only Gasket

Supply only oil indictor breather valve

Supply only compressor oil of suitable Grade/Make

M&L for preventive and periodical repair / overhauling of Steam Boiler of 850/650 Kg capacity (Make : Thermax RXD) - 03 Nos by engaging sufficient man power and suitable T&P to ensure safety of boiler plant as well as working persons including disconnecting of water / steam / electric connections, dismantling of boiler plant by unscrewing/cutting of screws, nuts & bolts etc, taking out complete coil assembly and other major parts from the boiler etc, replacing all defective spares parts, cleaning / servicing of coil assembly incl electrical control panel board, all machine works i.e. welding, cutting, drilling/ lathe etc as and when required and reassembling all dismantled part/items after carrying out necessary repair as required, other material, cleaning, servicing, oiling, greasing etc, making all steam / water connection and electrical connection, leak testing at desired pressure, with and including testing, commissioning of complete boiler plant in original location for smooth and trouble free operation, to entire satisfaction of Engr-in-charge, complete all as directed. Note : The entire work incl spare parts / items, shall be got executed through OEM i.e. M/s Thermax Ltd only. The contractor shall submit the record of overhauling / periodical/preventive maint services carried out by M/s Thermax Ltd along with documentary evidence for claiming payment. The boiler plants will be handed over to contractor in as and when condition and cost of all kind of repair incl minor items i.e. wire, lugs, nut, bolts, screws etc, other than mentioned in Sch A item No 85 to 109 here-in-after is deemed to be included in quoted rates and no extra cost shall be paid to the contractor in this effect. Hence, the bidder is advised to visit the site to assess the quantum of work to be carried out in this contract. Cost of transportation is also deemed to be incl in quoted rate.

Supply only limit switch suitable for Steam Boiler of 850 Kg /650 Kg capacity complete all as directed.

Supply only Coil RXD 850 for 850 Kg/ HR boiler HSN/ SAC 84029020 ,part No PRXCL10002 Model : RXD/850.

Supply only Sequence controller suitable for Steam Boiler of 850 Kg/ 650 Kg capacity.

Supply only Burner Rod suitable for Steam Boiler of 850 Kg capacity

Supply only metallic hose pipe 3/8" X 40 " size suitable for Steam Boiler of 850 Kg capacity

Supply only SS diffuser plate 132 mm suitable for Steam Boiler of 850 Kg capacity.

Supply only Insulyte 7 Low Density Insulating Castable suitable for Steam Boiler of 850 Kg capacity

Supply only electronic sequence timer suitable for Steam Boiler of 850 Kg capacity

Supply only thermocouple (TC) K type SS310 for Primary chamber suitable for Steam Boiler of 850 Kg /650 Kg capacity.

Supply only safety relief value suitable for Steam Boiler of 850 Kg capacity.

S & F PRV (Pressur reducing valve ) 50 mm bore including fixing arrangement , welding , brazing and taking down old unserviceable one all as specified and directed by Engr-in-Charge.

Supply and Fix Boiler Optimizer (Operation Performance Management for steem Plant) suitable for 860/660 Kg as per existing shape and size including taking down old unserviceable one all as specified and directed by Engr-in-Charge

Supply and Fix Boiler Economiser (Energy improving device) suitable for 860/660 Kg as per existing shape and size including taking down old unserviceable one all as specified and directed by Engr-in-Charge

Supply only Resin T-40 NA all as directed.

S&F, in replacement, of RTD PT-100 temperature sensor output, complete all as directed.

S&F, in replacement, of RTD temperature controller 0-1200ºC, K type input, complete all as directed.

Supply only oil filter suitable for Steam Boiler of 650/ 850 Kg capacity.

Supply only ignition electrode suitable for Steam Boiler of 850/600 Kg capacity.

Supply only photo ignition electrode suitable for Steam Boiler of 850/600 Kg capacity.

Supply only Fuel pump AJ6AC suitable for Steam Boiler of 850 Kg capacity.

Supply only Valve seat assembly for triplex pump suitable for Steam Boiler of 850 Kg capacity.

Supply only Maxtreat 3220 solution for water softning plant .

Supply only Maxclean 05 descaling chemical for boiler plant.

Supply only Maxtreat 3004 solution for water softning plant .

Supply only Hardness kit for testing of water.

M&L for preventive and periodical repair / overhauling of Dry cleaner of capacity 25 KG by engaging sufficient man power and suitable T&P to ensure safety of Laundry plant as well as working persons including disconnecting of water / steam / electric connections, dismantling of Dry cleaner plant by unscrewing/cutting of screws, nuts & bolts etc, taking out complete coil assembly and other major parts from the dry cleaner etc, replacing all defective spares parts (Spare parts shall be measured and paid seperately as 'supply only' in respective items catered here-in after ) cleaning / servicing of coil assembly incl electrical control panel board, all machine works i.e. welding, cutting, drilling etc as and when required and reassembling all dismantled part/items after carrying out necessary repair as required, other material, cleaning, servicing, oiling, greasing etc, making all steam / water connection and electrical connection, leak testing at desired pressure, with and including testing, commissioning of complete Dry Cleaner plant in original location for smooth and trouble free operation, to entire satisfaction of Engineer-in-charge, complete all as directed. Cost of Repair/replacement of Spare parts other than mentioned in Sch A item no 111 to 114 here-in-after shall be deemed to be included in quoted rate.

Supply only Air filter suitable for existing Dry cleaner shape and size including taking down old unserrviceable one all as specified and directed by .

M&L for repairing existing Dry Cleaner Oil pump capacity 01 HP with rewinding ,taking out ware and tear ,burnt material and fixing new component as per site requirment for smooth functioning of plant all as specifiec and directed by . Note - All spare parts ,T&P, transprtation and man power included in the quoted rate .

Supply only Gate nose for Dry Cleaner of capacity 25 Kg includig taking down U/S one all as specified and directed by .

Suppy only Rubber door gaskit suitable for Dry cleaner all as specified and directed by Engr-in-Charge.

M&L for dismantling of electric driven horizontal induction motor of upto 3.0 HP capacity of any type and make, by engaging sufficient man power and suitable T&P to ensure safety of pump-motor as well as working persons including disconnecting of electric connections, dismantling of motor, taking out the burnt windings, cleaning and washing of slots and rewinding the same with copper winding wire of existing gauge and quantity (as per original manufacturer design) including replacement of all damaged parts i. e. bearings, bush, thrust plate, thrust bearing, connector plate, insulating materials such as insulating sheets insulating paper (Class "F"), sealing compounds etc and reassembling the motor after varnishing, heating/drying, greasing of moving parts etc and reinstallation of the motor in original location, checking the alignment, making proper electric connection, testing for smooth operation, complete all as directed. Note : (i) The cost of winding wire and all replaced defective parts are deemed to be included in quoted rates and no extra cost shall be paid to the contractor in this effect. (ii) The cost of transportation (to and fro) and other necessary equipment shall be arranged/brought by contractor to complete the job at site or at repair shop and no extra cost shall be paid to the contractor in this effect.

All as per srl item no 115 here-in-above but for 5.0 HP capacity, 3 ph, 415 volt, 50 Hz AC.

All as per srl item no 115 here-in-above but for 7.5to 10.0 HP capacity, 3 ph, 415 volt, 50 Hz AC.

Supply and lay MS pipe pipe in replacement 20 mm bore heavy grade with all fittings laid in floors or ffixed to walls and ceiling etc omplete all as specified and directed by Engineer-in Charge.

All as per item No. 118 here-in-before but for pipe size of 25 mm dia.

All as per item No.118- here-in-before but for pipe size of 32 mm dia.

All as per item No.118 here-in-before but for pipe size of 40 mm dia.

All as per item No. 118` here-in-before but for pipe size of 50 mm dia.

All as per item No. 118 here-in-before but for pipe size of 65 mm dia.

All as per item No. 118 here-in-before but for pipe size of 80 mm dia.

All as per item No. 118 here-in-before but for pipe size of 100 mm dia.

M & L for insulation for MS pipe of 20 mm to 100 mm Dia size with PUF insulation and providing additional support to insulation with and including chickenwire mesh , with an include applying bituminus compound and GI Clading of 26 Guage GI sheet with Inc. taking down of old insulation and preparing of pipe surface by sctraching/removing rust ,Dust and old paints etc. with wire brush ,emery paper ,grinder etc and making surface smooth ,complete all as directed.

S&F in replacement Bronze Globe steam stop valve of size 50 mm dia as per ISI 778 ,class-2 gun metal body (IS-318LTB2), screwed in bonnet, out side screw and yoke type rising stem ,test pressure 500Psig. Hydraullic ,working pressure 250Psig at 450degree farenhite HSN CODE 84818030, complete all as directed.

All as per srl item No 127 here-in-above but 80 mm dia size.

All as per srl item No 127 here-in-above but 25 mm dia size.

S&F, in replacement, 6" dia caster wheel, swivel type, heavy duty, with supporting base plate bracket complete with nut and bolts etc of existing shape and size suitable for washroom trolley, complete all as directed.

S&F in replacement, 6" dia caster wheel, fixed type, heavy duty, with supporting base plate bracket complete with nut and bolts etc of existing shape and size suitable for washroom trolley, complete all as directed.

Supply only PVC container trolley as per existing size/ sample suitable for carry patiant cloths all as directed by Engr-in-Charge

Supply only crystal type salt of sodium chloride 25 Kg Bag for water softening plant @ 3 Kg/day complete all as directed.

Supply & fixing in replacement, of MCB 40 to 63 Amp,3 pole, 18 KA, C Curve, complete all as directed.

Supply & fixing in replacement, of MCCB 16 to 32 Amp,3 pole, 18 KA, C Curve, complete all as directed.

Supply & fixing in replacement, of MCCB 100 Amp, 3 pole, 36 KA, ICS = 100% ICU, with adjustable thermal magnetic setting alongwith Spreader terminals and phase barriers, complete all as directed.

All as per srl item No.136 here-in-before but 36 KA 250 Amp capacity.

All as per srl item No. 136 here-in-before but 36 KA 160 Amp capacity.

Supply only, in replacement of Brake Timer 0-60 sec time delay suitable for 25 Kg Hydro extractor Complete all as specified .

Supply only, in replacement of, Diode 10HI CN 25D as per existing suitable for 25 Kg Hydro Extractor complete all as directed.

Supply only, in replacement of, over load relay suitable for Hydro Extractor of 25 Kg, 5 HP Motor capacity complete all as directed.

Supply only, in replacement of Timer 0-15 sec time delay suitable for 25 Kg Hydro extractor Complete all as specified.

Supply only, in replacement of 3 Ph, 415 Volt , contactor, MNX-18 Amps with neccessary NO & NC aux contact Complete all as specified.

Supply only, in replacement of 3 Ph, 415 Volt , contactor, MNX-25 Amps with neccessary NO & NC aux contact Complete all as specified.

Supply & fixing in replacement of power contactor of 32 amp AC3 rating, 03 pole,MNX32 with NO+NC Aux Contacts, 415V with and including taking down of unserviceable contactor and making all electric connection, complete all as directed.

Supply & fixing in replacement of power contactor of 40 amp AC3 rating, 03 pole,MNX40 with NO+NC Aux Contacts, 415V with and including taking down of unserviceable contactor and making all electric connection, complete all as directed.

Supply & fixing in replacement of power contactor of 25 Amp AC3 rating, 03 pole, 415 V, ML 1.5 2NO+2NC contacts with and including taking down of unserviceable contactor and making all electric connection, complete all as directed.

Supply & fixing in replacement of power contactor of 25 Amp AC3 rating, 03 pole, 415 V,ML3 1 2NO+2NC Aux contacts with and including taking down of unserviceable contactor and making all electric connection, complete all as directed.

Supply & fixing in replacement of over load relay MN2 range 20-33 Amps, with built in single phase preventer, direct / separate mounting on contactors, as required, with and incl taking down of unserviceable relay and making all electric connection, complete all as directed.

All as per srl item No 149 here-in-above but 14-23 Amps capacity.

All as per srl item No 149 here-in-above but 4.5-7.5 Amps capacity.

Supply and fixing of Multi port valve for water softening plant 50 mm pressure 5 kg/cm2

S&F, in replacement of three phase MK1 DOL starter, in sheet metal enclosure with 4P, AC3 duty contactor, 4P over load relay and single phase protection suitable for7.5 HP, 3 Ph, 415 volt AC, 50 Hz electric motor incl making all electric connection, complete all as directed.

S&F, in replacement of three phase fully automatic Star-Delta starter MN 32 FASD starter, in sheet metal enclosure type with 4P, AC3 duty contactor, 4P over load relay and single phase protection suitable for 25 HP, 3 Ph, 415 volt AC, 50 Hz electric motor with relay range 14-23 incl making all electric connection, complete all as directed.

S&F, in replacement of Off -Load change over switch-AC 21(side handle), having powder coated sheet metal enclosure, 400Amp, 03 phase, 415 volt, complete all as directed.

M&L in replacement of Rubber Packing for lint screen suitable for washer Extractor of capacity 120/100 Kg complete all as directed.

M&L for applying one coat synthetic enamelled paint as desired colour over a coat of red oxide primer on steel/iron surfaces of pipes after preparing surface with help of emery paper etc removing rust, dust and old paints and making surfaces smooth for achieving better grip between surface and primer all as specified.

All as per srl item no 157 here-in-above but for 30 HP capacity, 3 ph, 415 volt, 50 Hz AC.

RUCHIKA ENGG.WORKS