Providing main LT Panel and outdoor illumination for administrative building at IA Surajpur Kasna Site 5 Distt GB Nagar

Amount

Electrical Works.

Supply & Fixing of 12.5 Mtr. High Mast shaft of approved make with rising system hot dip galvanized in side & out side dip, heaving pole sheet thickness 3 mm top dia minimum 150 mm bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as had frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia double drum winch, including making suitable foundation as per manufacture drawing, site regiment along with foundation bolts, nuts washers, anchor plates etc. complete in all respect.(Philips/Cromption/Bajaj make)

Supply & fixing of factory wired integral 200 W LED flood light luminaries with die cast aluminium housing built with driver set confirming to IP 66 protection complete in all respect. Philips/Cromption/Bajaj make of 5 year warranty,Cat.-AA

Supply & fixing 40 TPN capacity of automatic street light cubical panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors,HRC fuses, isolating switch metering instrument & instrument box with CT's etc.(Approved make UPPWD)

Supply & Fixing Additional MCCB 80-100A 4 Pole (16KA) CAT A on Proposed LT Panel including interconnection.

Supply & Fixing Additional MCB 63A 4 Pole (10KA) CAT Aon Proposed LT Panel including interconnection.

Supply & wiring of 16 Sq mm 2 core PVC Aluminum conductor sheathed cable 1100 Volt grade of approved make at a depth of 750 mm below ground in existing HDPE/GI/DWC hume pipe including cost of material,labour and T&P but excluding cost of HDPE pipe.

Supply and fixing of 15W to 18W indoor Recess mounting LED squre/round down lighter fitting powder coated die cast aluminium housing for with extended heat sink,diffuser built with driver complete in all respect. CAT-A

Supply and laying/drawing of submain with 2 nos. 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor in existing PVC conduct Pipe complete in all respect.

Supply and laying/drawing of submain with 2 nos. 10 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor in existing PVC conduct Pipe complete in all respect.

Supply and laying/drawing of submain with 4 nos. 6 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor in 32mm heavy duty 2mm thick PVC conduct Pipe complete in all respect.

Supply & fixing of 1200 mm 230V AC sweep type electric ceiling fan complete with standard accessories of approved make as per IS: 374/2019 (Havells/Crompton/Khaitan/Other Approved)

Supply & fixing 150 mm, 230V AC 50 Hz Sweep Exhaust Fan of cut-out size 240 x 240 mm made from ABS construction having min. speed 1350 rpm, polypropylene blade with dust protection shutters,copper winding motor, noiseless & vibration less Havells/Crompton/Khaitan/V-Guard/Luminious etc.

Supply & fixing 18-20W,230V,4 ft long Slim design Energy Efficient LED Batten tube light fixture made from Polycarbonate plastic with high performance diffuser & with decorative end cap (Havells/Philips/Syska/Wipro etc.)

Repairing & rewinding of 1200 mm ceiling fan with super enamel copper wire of B Class insulation including cost of dismantling, re fixing, varnishing, cost of material,men and T&P and buy back cost of copper scrap.

Supply and laying & concealing of 25mm PVC conduit pipe with ISI marked embossed and with PVC acessories confirming to IS No. 3419 like bends,couplers,staples and other acessories for drawing wires duly sealed at joints,plastering with cement sand mortar finished to level with mathing colour wash including cost of all material labour and T&P.

Supply and laying & concealing of 32mm PVC conduit pipe with ISI marked embossed and with PVC acessories confirming to IS No. 3419 like bends,couplers,staples and other acessories for drawing wires duly sealed at joints,plastering with cement sand mortar finished to level with mathing colour wash including cost of all material labour and T&P.

Supply and laying of 16 sq mm. 4 core standed aluminium conductor insulated armoured served sheathed cable 1100V garde on surface/existing pipe/HDPE/DWC pipe/Air.The cable run shall be fixed on M.S. clamps etc of suitable size or as directed by Engineer in charge complete in all respect.(including high mast)

Supply and laying of 25 sq mm. 3.5 core standed aluminium conductor insulated armoured served sheathed cable 1100V garde on surface/existing pipe/HDPE/DWC pipe/Air.The cable run shall be fixed on M.S. clamps etc of suitable size or as directed by Engineer in charge complete in all respect.(including high mast)

Supply and laying of 50 sq mm. 3.5 core standed aluminium conductor insulated armoured served sheathed cable 1100V garde on surface/existing pipe/HDPE/DWC pipe/Air.The cable run shall be fixed on M.S. clamps etc of suitable size or as directed by Engineer in charge complete in all respect.(including high mast)

Supply and laying of 95 sq mm. 3.5 core standed aluminium conductor insulated armoured served sheathed cable 1100V garde on surface/existing pipe/HDPE/DWC pipe/Air.The cable run shall be fixed on M.S. clamps etc of suitable size or as directed by Engineer in charge complete in all respect.(including high mast)

Suply & fixing of 16 sq mm. 4 core size brass nickle plated compression gland for PVC insulated cable complete in all respect.

Suply & fixing of 25 sq mm. 3.5 core size brass nickle plated compression gland for PVC insulated cable complete in all respect.

Suply & fixing of 50 sq mm. 3.5 core size brass nickle plated compression gland for PVC insulated cable complete in all respect.

Suply & fixing of 95 sq mm. 3.5 core size brass nickle plated compression gland for PVC insulated cable complete in all respect.

Supply & fixing of 16 sq mm. 4 core size plain or pin type copper tin plated cable socket (lug) to the cable leads insulating with colour tap and making connection for PVC insulated cable complete in all respect.

Supply & fixing of 25 sq mm. 3.5 core size plain or pin type copper tin plated cable socket (lug) to the cable leads insulating with colour tap and making connection for PVC insulated cable complete in all respect.

Supply & fixing of 50 sq mm. 3.5 core size plain or pin type copper tin plated cable socket (lug) to the cable leads insulating with colour tap and making connection for PVC insulated cable complete in all respect.

Supply & fixing of 95 sq mm. 3.5 core size plain or pin type copper tin plated cable socket (lug) to the cable leads insulating with colour tap and making connection for PVC insulated cable complete in all respect.

Supply and burying of 40mm dia x 4.5 meters long G.I pipe vertically for ear thing having 12mm dia. Holes spaced 75mm apart drilled up to 2 meter form the bottem complete with earthing lead of No. 6 to 8 SWG GI Wire in G.I. pipe up to apron and from appron to switch board the cost if G.I. wire in G.I. pipe will be extra upto switch board, 30cm square C.I. box with hinged cover masonry enclosure funnel at top. alternate layers of charcoal/coke and salt at lest 150mm thick allround etc. as per directions of engineer in charge complete in all respects.

Providing & fixing 25mm x5mm G.I. earth strip on surface or in recess including cost of GI saddle/Al. Alloy/cadmium/PVC fastener etc.plated iron screw etc. as required for connections.

Dismantling of existing old LT Panel including removel of circuit/cable including associated work as per directed by in charge.

Supply & fixing 90W LED Flood light fitting having die cast aluminium body and diffuser with driver set confirming to IP 66 protection complete in all respect.(Philips/Bajaj/Cromption make of 5 year warranty.CAT-AA,

Supply and fixing of 3 Watt LED Path / Walkover luminaire having powder cotated die cast aluminium body with drive set . Confirming to IP 65 Protection complete in all respect.(Havells/Bajaj/crompton/Syska)

Supply and fixing of 3 Watt to 6 Watt LED Spot/Spike light luminaire Confirming to IP 66 Protection complete in all respect.(Havells/Bajaj/crompton/Syska)

Supply & fixing 70W LED Street light fitting having die cast aluminium body and diffuser with driver set confirming to IP 66 protection complete in all respect.(Philips/Bajaj/Cromption make of 5 year warranty.CAT-AA,

Supply and laying of PVC Corrugated conduits of 25 mm outer dia on surface with required fixing acessories including cost of all material labour and T&P.

Supply and laying of PVC Corrugated conduits of 32 mm outer dia on surface with required fixing acessories including cost of all material labour and T&P.

Suppy,laying & drawing of 3x1.5 Sq mm PVC insulated copper cable in existing pipe/surface/air as required including cost of material, men and T&P.

Suppy,laying & drawing of 4x1.5 Sq mm PVC insulated copper cable in existing pipe/surface/air as required including cost of material, men and T&P.

Supply & fixing of post top lantern 400mm glob type complete in all respect including cost of 3W-6W LED, men and T&P.(Havells/Bajaj/Standred make)

Saraswati Electricals & Contractors

M/S A.K POWER TRANSMISSION TECHNOLOGY PVT LTD