Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.7 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹34.7 L+₹3.2 L (10.2%)Rejected-Finance MCB Z 5 04939 GURU GOBIND NAGAR BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L2 | Rejected-Finance NOT LOWEST |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
26 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Abohar
Garrison Engineer Abohar Pin 152116
Comprehensive B/R and E/M repairs to OTM and Married Accomodation of Inf Bn-II at Military Station Fazilka.
2023_MES_606679_1
GE ABH-25/23-24
Open Tender
Civil Works
Item Rate
270 days
FAZILKA MIL STN
AS PER NIT
7 documents required · 7 mandatory
₹500
GE ABOHAR
₹76,000
Yes
1 Sept 2023
28 Jun 2023
28 Jul 2023
28 Jun 2023
26 Jul 2023
12 Jul 2023
Amount
Taking down chowkats or frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store all as specified and directed.
Taking down chowkat with shutter exc 1.5 sq.m but n.exc 4 Sqm each and refixing the shutter in same opening all as specified and directed.
Taking down shutter of any description exc 1 sqm and n exc 2.00 sqm each and removing to store yard all as specified and directed by Engineer-in-Charge.
Refixing of shutter in other opening of any description exc 1 sqm and n exc 2.00 sqm each all as specified and directed by Engineer-in-Charge.
S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed.
S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; Panelling for plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification.
S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as directed by Engineer In Charge. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
S&F 18mm thick PVC sheet having one side decorative laminated sheet all required brackets SS screws etc. the panel shall be fabricated using adhesive and screws where ever required.all the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification as directed by Engineer -in-Charge.
S & F pressed steel door frames with one or more rebates including necessary fixing lungs hinges lock strike plate etc complete all as specified size of frame 105 x 60mm all as specified and directed by Engineer - in - Charge .
S & F pressed steel door frames with one or more rebates including necessary fixing lungs hinges lock strike plate etc complete all as specified size of frame 125 x 60mm all as specified and directed by Engineer - in - Charge .
M&L Cement concrete 1:2:4 type B–1 filling of pressed steel frame and hold fast blocks etc all as specified and directed by Engineer - in - Charge.
S & Factory made 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.20 (a) ; supplied and fitted to chowkats all as specified.
S & Factory made flush shutter 35mm thick solid core construction with block board core and plywood face panels commercial type on both sides with lipping / frame to match all as specified and directed by Engineer - in - Charge.
M&L Factory made 35mm thick 2nd class hard wood plain framed panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, all as specified and directed.
M&L 18/19 mm thick prelaminated partical board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work.
S&F Aluminium handle cast type anodized 125 mm long all as specified and directed by Engineer-in-Charge.
S&F Aluminium handle cast type anodized 150 mm long all as specified and directed by Engineer-in-Charge.
S&F Aluminium anodized barrel tower bolt of extended section and fixed 150 mm long all as specified and directed by Engineer-in-Charge.
S&F 100 mm long butt hinges extruded almiunium alloy with galvanised mild steel hinges pin, anodised and fixed all as specified and directed by Engineer-in-Charge.
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as directed.
S & F Magnet ball catcher for cupboard shutter, complete all as specified and directed by Engineer - in-Charge.
S & F continous (Piano)type hinges mild steel bright finish or lectro galvanised with wide of flaps 30mm complete all as spd and directed.
S&F in repair 100 mm size hasp and staple,safety type,Stainless steel bright finish ,including bolt to hinge plate and fixed with screws,complete all as directed.
S&F factory made prefabricated pressed steel door frame made out of mild steel 1.25 mm thick girth of frame 185 mm including necessary MS rawl plug/bolts and fixing 75 mm long butt hinges medium weight cold rolled mild steel etc and shutter including stiffeners made out of mild steel sheet 1.25 mm thick cut to size, holes punched and welded seams including bending or turning up all around, mitred angle etc as required with locking arrangement using mild steel mortice lock 4 levers with 2 Nos of keys of size 100 mm (Make Godrej/Harrison/Navtal) including MS chromium plated handle and 2 Nos MS locking rods out of 8mm dia not exc 1000mm long fixed to mortice lock and handle with necessary bolts and nuts covered by MS sheet 1.25 mm thick complete including two coat of synthetic enamel paint over a shop coat of zinc chromate primer on interior surface (not visible from front) and hammer tone paint on exterior surface (visible from front) complete as per Godrej pattern all as specified and directed by Engr-in-charge drawing complete all as specified and directed by Engineer-in-charge.
M&L preparing surface of wood and wood based surface new on any description not other wise described over 10cm with or grith and applying two coat of synthetic enamel paint over a coat of pink primer all as specified and directed by Engineer - in - Charge.
M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint all as specified and directed by Engineer - in - Charge .
M & L for preparation of old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint all as specified and directed by Engineer - in - Charge .
M&L applying two coats of synthetic enamel paint over a coat of red oxide 0r zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifed and directed.
S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifed and directed.
S&F in repair MS 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge.
S & F drapery curtain rod, mild steel, powder coated 25mm dia with brackets, knobs, end stops etc all as specified and directed by Engineer - in - Charge .
Hacking out old broken glass (any size,thickness,quality or description from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified & directed by Engineer -in-charge.
S & F in 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each pane all as specified and directed by Engineer - in-Charge.
S & F 3 mm thick pin headed sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engineer - in-Charge.
Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc.
M & L 10mm thick rendering in Cement Mortar 1:3 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge .
M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge .
M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge .
M&L Washed coloured stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 pigmented stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified . Note:-Payment for providing grooves shall be made separately.
Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using aluminium channel, nailed to the under layer of panels complete as per specifications and direction of the Engineer-in-charge
M & L applying three coat of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified.
M & L Preparation of newly plastered surfaces by applying two coats of interior grade wall putty and making it smooth with sand paper by mechanical method i.e. with hand electric grinder then applying two coats of oil bound distemper over one coat of cement primer including all as specified by mechanical method i.e. spray gun all as specified and directed by Engineer-in-charge.
M & L applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.
M & L for complete removal of existing treatment and applying two coats of white wash on old decorated plastered or unplastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .
M & L Preparation of Old plastered surfaces by removing old treatment and applying two coats of interior grade wall putty and making it smooth with sand paper by mechanical method i.e. with hand electric grinder then applying two coats of oil bound distemper over one coat of cement primer including all as specified by mechanical method i.e. spray gun all as specified and directed by Engineer-in-charge.
Material & labour for preparation of old decorated (platered or unplastered) of walls and applying one coats of oil bound distemper complete all as specified & directed by Engineer -in-charge.
M & L applying one coat of cement based paint on old decorated or undecorated wall surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified.
M & L for complete removal of existing treatment and applying two coats of cement based paint on old decorated or undecorated wall surface,including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete complete all as specified and directed.
M & L for complete removal of existing treatment and applying two coats of white wash on old decorated plastered or unplastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .
M & L Preparation of Old plastered surfaces by removing old treatment and applying two coats of exterior grade wall putty and making it smooth with sand paper by mechanical method then applying two coats of weather proof exterior emulsion over a coat of exterior primer complete all as specified and as directed by Engineer-in-Charge.
Demolation of ashlar facings, dressed stone work, stone slabs or tiles from paving and precast concrete blocks and articles all as specified.& directed by Engineer -in-charge..
M&L 16mm thick granite (of any type ) work (table rubbed and polished ) in cooking platform and like in cm (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite.
M&L 18-20mm thick machine cut kota stone slab (table rubbed and polished) as in flooring laid over and including 15 mm thick screed bed or bedding layer in CM (1:4), set and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing, grinding and mirror polishing upto desired satisfaction of Engr In Charge complete all as specfied and directed.
Cutting ,grinding ,cleaning and treating the surface of existing kota stone flooring with beeswax polishing complete as directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), remving serviceable tiles to stores and and rubbish off the permises.
M & L for glazed ceramic coloured tiles 7mm thick 300 x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer - in - Charge.
M & L for glazed ceramic coloured tiles 7mm thick 300 x 200mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to tile shade over and including 10mm thick cement sand plaster (1:4) complete all as specified and directed by Engineer - in - Charge.
M&L Non skid ceramic coloured /printed tiles 7 to 8 mm thick( square /rectangular) area of each tile exc. 0.11 sqm but n. exc, 0.18 sqm and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shade over and incl 15 mm th screed bed in CM 1:6 complete all as specified and directed by Engr in Charge.
M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base all as specified.
M&L cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate as in floors 25 mm thick for tiles all as specified.& directed by Engineer -in-charge..
Demolition of cement concrete ( un re-inforced) of any description in ground floor and pavings Nexc15 cm thickness (below or above GL)
S&F in repairs stainless steel kitchen sink with drainage board of overall size 915x460mm and bowl size 410x330x160mm with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as directed.
M & L runnung welding in repairs thickness of metal exc 6mm n exc 9mm. Complete all as specfied and directed by Engr in Charge
S&F anodised aluminium frame for doors , window , ventilatores with with one or more rebate including joiing cleat forfixing etc . complete all as specified.
Supply only anodised aluminium door shutter , aluminium section wt 0.55 kg / mtr including necessary joining cleats ,glazing clips, rubber eoprene packing , handles 2 Nos. in each door , hinges , anodised aluminium snap beading screws etc.
Supply only anodised aluminium window / ventilator shutter , side hung type without sash bar ,aluminium section wt 0.55 kg / mtr including necessary joining cleats , glazing clips, rubber packing , anodised aluminium snap beading screws , anodised aluminium fitting such as peg stays 150 mm long (1 No.) hingestype B-21 100mm long (2 Nos. )suitable handle (1 No) complete allas specified .
S&F anodised aluminium grill of daimond (Min Wt 1.50kg/sqm) including necessary joining cleats , anodised aluminium snap beading screws , complete all as specified .
S & F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.
S&F in repairs door closer hydraulically regulated, aluminium (Die cast) body, designation No. 3, universal type suitable for door shutter upto 1000mm in width complete all as specified and as directed.
M&L in repairs Aluminium Motrice lock 4 levers and 75mm size for aluminium doors
S&F for Alum door stopper of any descripion all as specified and directed by Engineer-in-charge.
S&F door seal PVC 30mm wide with foam complete all as specified & directed by Engineer-in-Charge.
Taking down and refixing of alum window shutters of any size in same opening incl repairs /replacement of rubber packing,glass,glazing clips & aluminium section etc (The item glass,glazing clips & alum section will be measured seperately)
Taking down aluminium door shutter ,Refixing of shutters of any size in same opening incl repairs / replacement of rubber packing,glass,glazing clips & aluminium section etc after tightening of members, adjusting of door closure etc. complete all as specified and directed (The item glass,glazing clips & alum section will be measured seperately)
Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.
M&L brick work with sub class' B' bricks(except bricks) of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 all as specified and directed.
M&L Brick work with old size burnt fly ash bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed.
S & F in repair brass chromium plated central hole basin mixer with regular spout , popup waste system and 450mm long braided hoses with connection and nuts complete all as specified and directed .Make : ESS ESS ,Hindware ,Jaquar or equivalent.
S&F sink mixer with swinging spout (wall mounted model) chromium plated brass with connection and nut complete all as specified and directed. Make : ESS ESS ,Hindware ,Jaquar or equivalent.
S & F in repairs brass chromium plated wall mixer with non telephonic shower arrangement for mixing hot and cold water screwed down for iron pipe and fixed as directed. Make : ESS ESS ,Hindware ,Jaquar or equivalent.
S & F in repairs 15 mm bore bib tap fancy type chromium plated with crutch or butterfly handle screwed down ,screwed for iron pipe all as specified.
Supply and fix in repair only brass spindle suitable for bib cock / angle cock / pillar cock / concealed stop cock as per sample approved by GE.
S & F in repair brass chromium plated water tap handle or knob of specification and make as required at site and as directed by Engr-in-charge.
S & F in repairs 15mm bore CP Angle cock one way chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified .
S&F in repairs 15mm stop valves fancy type, chromium plated with long shank and cup (concealed type) ,cast copper alloy, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
S&F in repairs pillar taps 15mm bore fancy type chromium plated cast copper alloy with capstan heads scre-wed down high pressure with or without lettered hot' or'cold' with long screwed shanks and fly nuts screwed for iron pipe . ISI marked.
S&F in repair CP grating suitable for 75/100 mm bore floor trap and fixed with white cement.
S&F in repair PVC connection both side brass unions internal for size 15mm dia and 450mm long all as specified and directed by Engineer-in-Charge.
S&F PVC waste pipe 32mm dia & 90 cm long all as specified and directed by Engineer-in-Charge
S & F in repairs glass corner shelf assembly fancy type made 8 mm thickn sheet glass of size 300x300mm fixed with 'F' or 'D' type brass CP brackets complete all as specified.
S & F in repairs towel rails 16 mm dia 600 mm long superior quality brass chromium plated fancy type Complete all as specified fixed in repairs.
S & F in repairs for brass chromium plated shower rose 125 x 125 mm size with swivel joint including fixing to 15 mm dia steel pipe or union.
S&F in repairs soap dish,chromium plated, 100X100X60mm, fixed to wall with plugs with chromium plated screws complete all as specified and directed.
S&F Chromium plated health faucet 1 mtr long fixed with screws complete all as specified and directed.
S&F EWC Jet spray complete all as specified and directed.
Dismantling water tanks and removing to store of exc 250 nexc 500 ltr capacity
S & F rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 500 Litres all as specified and directed by Engineer - in - Charge .
S&F thermal insulation cover for 500 litres overhead water storage tanks having six layer insulation jacket and two layer UV protection complete with top cover and fixing belts all as specified and directed by Engr-in-charge.
Dismantling water tanks and removing to store of exc 500 nexc 1000 ltr capacity
S & F rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 1000 Litres all as specified and directed.
S&F thermal insulation cover for 1000 litres overhead water storage tanks having six layer insulation jacket and two layer UV protection complete with top cover and fixing belts all as specified and directed by Engr-in-charge.
M&L ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore iron pipe supplied and fixed complete all as specified and as directed by Engineer-in-charge.
M&L in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore iron pipe supplied and fixed complete all as specified and as directed by Engineer-in-charge.
S&F gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia all as directed.
S&F in repair PVC low level flushing cistern of 10 Ltr capacity with 10 ltr discharge option flush pipe complete as approved by Eng-in charge.
S&F in repair Viterous China squating pan Orrisa pattern size 580/440mm wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with plastic seat cover.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, sheet cover complete.
S&F in repair vitreous china,white wash hand basin ,pedestal type, flat back size 550x400mm complete all as specified and directed by Engineer-in-Charge.
S&F in repair plastic water closet seat, white closed patern withflat bottom and cover and mild steelcromium plated or aluminium hinging device
Taking down eves and gutter and rain water of any size all as specified and directed by Engineer - in - Charge .
S & F 110mm PVC (SWR) pipes of 4 kg/cm² pressure rating, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
Fixing only PVC (SWR) pipes of size 110 mm of any length with rubber ring joints fixed to wall complete with all fittings all as specified & directed by Engineer-in-charge.
S&F 110mm PVC (SWR) pipes of 4 kg/cm² pressure rating, single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
S&F 75mm PVC (SWR) pipes of 4 kg/cm² pressure rating, single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
S & F 110mm PVC (SWR) pipes of 4 kg/cm² pressure rating and single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F 110mm PVC(SWR) bends any radius complete all as specified and directed.
S&F 75mm PVC(SWR) bends any radius complete all as specified and directed.
S&F PVC (SWR) floor trap 100/75 mm bore with grating including jointing to waste pipe and fixed with PCC 1:2:4
S & F 100mm bore stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof all as specified and directed.
Dismantling of CI pipes or reinforced concrete pipes 100 mm dia fixed to wall etc complete all as specified and directed.
Dismantling of CI pipes or reinforced concrete pipes 75 mm dia fixed to wall etc complete all as specified and directed.
S&F in repairs 100 mm dia. cast iron waste and vent pipe in any length with or without ear with cement joints fixed to wall.
S&F in repairs 75mm dia cast iron waste and vent pipe in any length with or without ear with cement joints fixed in repairs to wall .
S & F in repairs CI bends 100mm dia (any radius), diminishing pieces or tapers( larger bore measured).
S & F in repairs CI bends 75mm dia (any radius), diminishing pieces or tapers( larger bore measured), with access door.
S & F in repairs CI branch pieces single 100mm dia (equal or unequal), ordinary or inverted or with parallel branches, with access door, complete all as specified.
S & F in repairs CI branch pieces single 75mm dia (equal or unequal), ordinary or inverted or with parallel branches, with access door, complete all as specified.
S&F CI 'P' or 'S' trap of 100mm size all as specified and directed by engineer-in-charge.
Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store
Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store
S&F Chlorinated PVC (CPVC) pipes 20 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.0 m spacing . this includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and directed. Make : Supreme/Vectus or equivalent
Supply & fixing mild steel tubes of size 20 mm bore (medium grade) galvanised with all fittingsand fixed complete to wall all as specified.
S & F framed work such as grills, cooler stand ,ladder grating and sun shed etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work or water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified .
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.
M & L RCC 1:1½:3, (nominal mix), Type A-1, using 20mm graded aggregates as in chajjas, fins, fascias,shelves , louvers, parapets and railing etc and the like including necessary formworks all as specified and directed by Engineer - in - Charge.
S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia.
M & L for providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.50 Ltrs per Sqm of the vertical surfaces of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc. complete all as specified and directed. Note : Quantity will be measured perimeter of wall x depth of penetration.
M & L cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in lintels up to 1.5 m clear span, seismic and other similar bands, benching, coping, bed blocks, apex stones and kerbs etc including use of necessary form work all as specified and directed by Engineer - in - Charge .
S & F in repairs water tank cover of any description all as specified and directed by Engineer-in-Charge.
S & F in repairs stainless steel plate rack of size 900x775x250mm of 1mm thick stainless steel of 1st Quality all as specified and directed by Engineer-in-Charge.
M&L 50mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection in panel not more than 2.5m span, surface finished even smooth without using extra cement.
Taking down carefully existing copper/aluminium point wiring (light/fan/sockets/bell/power point) complete with all accessories such as switch with sheet, ceiling rose including rusted/broken concealed conduit, junction and sunken boxes etc and removing dismantled material and making good disturbed surface of walls/floors etc matching with existing surface complete all as specified and as directed by Engineer-in-Charge.
Material and labour for concealed Point wiring for one light point/fan point /bell point controlled by one switch (using red, black and green colour wires as colour coding) complete with 1.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt drawn through and including PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers for painot type fittings and for 2mm thick galvanised steel pressed sunken box suitable for modular switch socket (Min 60mm deep, suitable length) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches/ socket / regulator etc, including provn of 1.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed. (switches/ socket / regulator shall be measured and paid separately under appropriate item of BOQ).
All as per Item No.146 above here in before but for One three pins 5 Amps switch socket outlet point on independent board
All as per Item No.146 above here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches
All as per Item No.146 above here in before but for One light point controlled by two 2-way switches of 5 amps
Description all as per item No.146 above here in before but for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.
Description all as per item No.146 above here in before but for 15 amps socket outlet with 4 Sqmm Copper incl 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.
Material and labour for concealed Point wiring for one light point/fan point /bell point controlled by one switch (using red, black and green colour wires as colour coding) complete with 1.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through existing PVC conduit but including 2mm thick galvanised steel pressed sunken box suitable modular switch socket (Min 60mm deep, suitable length) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches / socket / regulator etc, including provn of 1.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. complete all as specified and as directed. (switches/ socket / regulator shall be measured and paid separately under appropriate item of BOQ). Note:- Where ever it is not feasible to cable drawn through existing PVC conduit (for ceiling fan point only) due to blocked, casing caping shall be provided by contractor without any extra cost, cost for the same shall deemed to be included in the quoted unit rate.
All as per Item No.152 above here in before but for One three pins 5 Amps switch socket outlet point on independent board
All as per Item No.152 above here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches
All as per Item No.152 above here in before but for One light point controlled by two 2-way switches of 5 amps
Description all as per item No 152 above here in before but in existing conceales for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.
Description all as per item No.152 above here in before but for 15 amps socket outlet with 4 Sqmm Copper incl 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly using color code as per IS and all as specified complete all as specified and directed.
Supply and fixing modular switch 5/6Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge. Make :- Havells or Techno commercial equivalent Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.
Supply and fixing modular switch 5/6Amps, single pole, two way (1 module) complete all as specified and as directed by Engineer-in-charge. Make :- Havells or Techno commercial equivalent Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.
Supply and fixing modular Bell Push switch, 5Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge. Make :- Havells or Techno commercial equivalent Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.
Supply and fixing modular Socket outlet multipurpose type 6 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge. Make :- Havells or Techno commercial equivalent Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.
Supply and fixing modular Socket outlet multipurpose type 6/16 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge. Make :- Havells or Techno commercial equivalent Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.
Supply and fixing modular switch 6/16Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge. Make :- Havells or Techno commercial equivalent Note :- Inner/Outer plate for fixing the switch shall be included in point wiring item of BOQ.
S & F in repairs switch piano one way 5/6 amps 240 volts complete all as specified and directed.
S & F switch piano one way 15 amps 240 volts complete all as specified and directed.
S & F Bell push AC, 50 Hz, 230 Volts, 5 amps complete all as specified.
S & F Bell ding dong AC, 230 Volts, Single pole complete all as specified.
S & F socket 5 in 1, 5 amps flush type complete all as specifeid.
S & F socket 5 in 1, 5/16 amps flush type complete all as specifeid.
S & F switch piano flush type 5 amps but 2 way type complete all as specified.
M & L lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings incl LED bulb 12W complete, Make- Anchor/SSK/CONA
M & L Ceiling rose, 3 terminals/phase type, fabricated of PVC/Polycarbonate, isolated body complete, Make-Anchor/SSK/CONA
Supply only fan regulator electronic (socket) type, single phase, 230Volt complete all as specified and directed Make: Anchor/Cona and equivalent .
M&L for submain wiring comprising single core ,2 Runs of 10 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade drawing in and including appropriate dia. PVC conduits and conduit fittings/existing concealed conduit complete, including provision of 1 x 10 sqmm nominal cross sectional area multistranded copper conductor cable PVC insulated unsheathed 1100 Volts grade as earth wire complete incl taking down old UNSV sub main all as specified. ( Note :-(i) Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly) (ii) Run of 3 wire shall be measured as 1 RM
Description all as per item No.174 above here in before but 6 sqmm complete in PVC conduits/ complete all as specified.
Description all as per item No.174 above here in before but 4 sqmm in PVC conduit and its fittings complete all as specified and directed by Engr-In-charge.
M & L cutting chases, pinning in, making god to facings where reuired and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc ; and cutting chases for concealed water tubing or concealed wiring etc, and making good, cutting not exc 10 cm girth in brick walls complete all as directed by Engr-in-charge .
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable of size 2 core 10 sqmm nominal cross section in service connections of PVC insulated aluminium multi standard conductor served with an inner sheathing of PVC tape and overall PVC sheathed complete all as specified and directed by Engr-In-charge.make- Havells/Kalinga
All as per Item No.178 above here-in-before but 2 core 6 sqmm complete all as specified and directed.
Supply and fixing MCCB TPN ( 4 pole) 63 Amps 415 Volts of braking capacity 16 KA complete taking down old unserviceable one and making necessary connections as existing ls with CTC solutions complete all as specified and directed. Make : Havells/Legrand/Schneider
All as per Ser Item No.180 above here-in-before but 100 Amps with braking capacity 16 KA.
All as per Ser Item No.180 above here-in-before but 125 Amps with braking capacity 16 KA.
S&F sheet metal enclouser VTPN/HTPN DB having facility to fix MCCB incomer upto 125 Amps and MCBs in outgoing, TPN 4 ways, Double door type complete fitted with bus bars, neutral links, IP-43 protection Isolated Neutral bar,door earthing,cement spill protector,insulated bus bar assembly and blanking plates including making good disturbed surfaces after taking out old unserviceable DB complete all as specified and directed. Make : ABB/Havells/Schneider
All as per Item No.183 above here-in-before but TPN DB 8 Way double door type complete all as specified and directed.
Dismantling of existisng unserviceable MCB distribution board and S&F sheet metal enclouser SPN DB having facility to fix MCB in incomer and MCBs in outgoing, SPN 8 ways, Double door type complete fitted with bus bars, neutral links, blanking plates including making good disturbed surfaces complete all as specified and directed. Make : ABB/Havells/Schneider
All as per Item No.185 above here-in-before but SPN 4 ways, Double door type complete fitted with bus bars, neutral links, blanking plates including making good disturbed surfaces complete all as specified and directed.
S&F PVC enclouser SPN DB 2 way having facility to fix MCB DP/SPN 2 ways complete fitted with bus bars, neutral links including provision of MCB DP 6-16A and making good disturbed surface area complete all as specified and directed.
Supply and fixing Plug and socket type DB (Functional Unit) 20 Amps capacity with provision of single pole 20 amps MCB, plug top and earth plug, grouted flush to walls and necessary cement work for make good as existing to all disturbed surface complete all as specified. Make : ABB/Havells/Schneider
Material and labour for replacing 2mm thick galvanised steel pressed sunken box (Min 60mm deep, suitable length) grouted flush to walls and necessary cement work of cm1:4 and applying putty around 3 mm thick switch board to match with existing surface and provision of suitable hylem sheet of 3 mm thick by fixing existing serviceable switch,sockets,regulator for any type of concealed Point wiring complete all as specified and directed. Note: Replacing Old Unserviceble switch,coekt,regulator if any with new is measurale in sepearte items
Supplied and fixed Miniature circuit breaker (MCB) single pole, 240 Volts, of 6-32 amps current rating and 10 KA breaking capacity, B' series type complete all as directed by Engr-in-charge. Make : ABB/Havells/Schneider
Supplied and fixed MCB, Double pole, 240 Volts, of 32-63 amps current rating of 10 KA complete all as directed by Engr-in-charge.
M&L LED tube light fixture environmental friendly energy efficient of 18/20W LED 6500K and above (4') including electric connection with PVC copper flexible twin core cable, 1.0 sqmm from ceiling rose to light fitting complete all as specified and directed by Engr-In-charge. Crompton Cat Pt No. LDSLRP20-CDL or equavalent of Havells/Philips
S & F LED street light luminaitres 20/25 watts with IP66 complete with pressure dia cast aluminium housing with GI pipe bracket made out of 25 mm dia medium grade pipe (45 cm long) bend to shape including fixing arrangement to wall with MS flat 25x3mm-2 Nos by nut, bolts and washers including electric connection with PVC copper flexible twin core cable 1.0 sqmm from ceiling rose to light fitting complete all as specified and directed by Engr-In-charge. Havells Cat Pt No. ENDURASUNDOWNSL25WLED 765 PASYBOPCIHD equavalent of Crompton/Philips
Supply and fixing LED tube light fixture environmental friendly energy efficient of 2 feet, 10 Watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.Crompton Cat Pt No. LDLL10-CDL or equvalent of Make: Havells/Philips
M&L for WEE Plus LED bulk head luminaire of capacity 10 Watt an ideal energy efficient solution of metal body white upgrading conventional GLS bulkhead luminaires to LED bulk head IP 66 complete all as specified and directed by Engr-InCharge.model IK-09 metal body specially designed of Philips or equvalent of Make: Crompton/Havells
Supply &fixing LED driver 15W to 25 W LED recess/surface light fitting Indoor type suitable for existing light fitting as per sample complete all as specified and directed.
Supply &fixing LED driver 30 W to 40 W LED recess/surface light fitting Indoor type suitable for existing light fitting as per sample complete all as specified and directed.
Supply &fixing LED Strip 15 W to 40 W LED recess/surface light fitting Indoor type suitable for existing light fitting as per sample complete all as specified and directed.
M&L for Earthing complete with GI earth plate electrode of size 600x600x6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI wire 4 mm dia earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel, protected by galvanized iron pipe 40mm bore (Medium grade) all as directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x10cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel, wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, earth testing point, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion all complete as specified and directed after taking down old earthing.( GI wire upto 7.5m including testing consider in this item).
Supply and fix LT Main control board of CRCA sheet metal board made out of 2.0mm thick and painting with 2 coats with synthetic enemel paint over a coat of red oxide primer including copper bus bar and fixed on/inside wall for fixing arrangement of existing electronic meter incl internal connection with suitable size of copper conductor wire, and accessories, locking arrangement with opening handle (size not less than of box 100cmx80cmx25cm and adequate depth for the following equipments,internal wiring and termination of external cables, lugs and glands and conduit as required) including Taking down existing Old Unserviceable main control board comprising of following :- (a) Incoming :- MCCB 100 Amps, 4 Pole,415 Volts, 16 KA-01 No (b) Copper Bus bar 200 Amps for phase and neutral and earth bar (c) Out going MCB SPN 40 Amps - 4 Nos (d) Out going MCB SPN 10 Amps - 1 No
S&F 1.5 sqmm 3 core, 1100 volt grade heavy duty cable, PVC insulated copper multistranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed for making connection Of bldg street lights/fan/garden lights complete all as specified and directed
Supply and fixing LED light fitting 1 x 16 Watt flame proof, CMRI certified recommended for gas/vapor group of IIA & IIIB, Zone-1 &2 and IP 65 protection with die cast aluminium housing with heat resistant toughened glass with LED tube light fixtures driver holders connector complete withh all accessories prewired and including connectiong up with three core flexible copper conductor cable with suitable size. Model FIAMMA Cat No. EXTN1LT8 of Crompton or equvalent of Make:Havells/Philips/sudhir
Repair and maint to flame proof light fitting and replacement LED tube rod and minor spares like rubber seal,biin holder, nut bolts and washers by duly taking down the light 1 x 16 Watt flame proof complete withh all accessories and prewired and including connectiong up with three core flexible copper conductor cable with suitable size
Demolishing the broken earth pit chamber and constructing new earth pit chamber brick work in cm 1:4, plastering cm 1:3 and PCC chamber cover only complete as per SSR Pt -I of 1996 including new wire mesh funnel all as directed.
M&L for replacing of hinge, lock, spring tenstion and sheet metal door if reqd for MCB SPN DBs 4/6/8/12 way and necessary cement work to match with the exsting surface duly cleaning and tightning the loose terminations using proper termination connectors for earth and neutral complete all as specified and directed
M&L for replacing of hinge, lock, spring tenstion and sheet metal door if reqd for MCB TPN DBs 4/6/8/12 way and necessary cement work to match with the exsting surface duly cleaning and tightning the loose terminations using proper termination connectors for earth and neutral complete all as specified and directed
M/s GURFATEH BUILDERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .