SPECIAL REPAIRS TO SMQs OF WARRANT RANKS AT AF STATION TAMBARAM

Amount

Taking up or down 15 mm dia steel tubing and connections, wall, ceiling or floor etc complete all as specified and directed.

All as per item No.1 but 20 mm dia of pipe

S&F 20 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings, elbows, tee,adapters, union on walls/ceiling or laying in floors complete all as specified and directed. Make : Finolex/Deutron/SFMC

All asper item No.3 but diameter of the pipe 25mm

S&F gate valve 25 mm dia with iron wheel head, screwed both ends for fixing to iron pipe all as specified and directed Make Prayag/Jaqaur/zoloto

M/L Fly Ash Brick with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls in cement mortar 1:4 complete all as specified and directed.

Taking down Cement Plaster, any description on Brick Walls or on Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc, and removing same from the Site(s), complete all as specified and directed.

Rendering 5mm thick in Cement Mortar 1:4 mixed with water proofing compound at a rate of 3% by weight of cement over 10 mm thick cement plaster in CM 1:6 including finished even and smooth with out using extra cement, complete all as specified and directed. (Note : WPC is deemed included in the item)

Rendering 10mm thick on Fair Faces of Brick Work or Concrete Surfaces in Cement Mortar 1:6, and finished Even and Smooth without using Extra Cement, complete all as specified and directed.

Rendering 5 mm thick in Cement Mortar 1:3 on concrete surfaces on ceiling finished Even and Smooth without using Extra Cement complete all as specified and directed.

Taking down (Steel/ Wooden) frame any description exc. 1.5 sqm but not exc 4 Sqm each (with out taking off shutter from the frame) incl hardware fittings

All as per item 11 but n exc. 1.5 sqm each with shutters and hardware fittings

S&F 2nd class Hard wood factory made glazed/skeleton shutters 35 mm thick open rebated prepared to receive glass, gauze divided in squares with plain, chamfered or rounded, mitred and rebated sash bars any number with plain, chamfered or rounded, mitred and rebated beads for securing glass gauze etc complete all as specified and directed.

S & F flush shutters 35 mm thick solid core construction with particle board core and 3mm thick BWP Ply wood face panels, commercial type on both sides with 6mm thick and both face covered with decorative face veneer with lipping /frame to match complete all as specifed and directed.

S&F Brass CP 3-in-1 wall mixer for mixing hot & cold water CP over head and telescopic shower including shower L bend tube and fixing accessories screwed down for iron pipe and fixed complete all as specified and directed Make Prayag cat part No 8080 / Jaquar/ Parryware or equivalent

S&F aluminium die cast Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all specified and as directed.

S&F flush shutter 25 mm thick Solid core construction with Block board and plywood face panels, commercial type on both sides and both face covered with decorative face veneer with lipping /frame to match complete all as specifed and directed.

S&F in repairs, PVC 18/19 mm thick, 600 kg/cum density lead free PVC soild celuka ply of single side rigid laminate of approved colour and other side plain white colour fixed with ss screws and solvent cement/ adhesive, matched colour lipping over cut face surface etc to make frame work as cup boards shelves, partition, kitchen cabinets including magnetic catchers as required at site complete all as specified and directed

S&F factory made solid PVC moulded flush door shuuter with wood free EPS, 30mm thick (Style) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm thick plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification & drawing

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supply and fixing as specification and drawing.

S&F 100 mm long stainless steel butt hinge with stainless steel screw and fixed complete all as specifed and directed

S&F stainless steel handle of size 150mm fabricated type and fixed complete all as specifed and directed

S & F continous (piano) hinge mild steel, 40mm width of flaps (when open) ,bright finish or electrogalvanised in repair complete all as specified and directed.

S&F stainless steel barrel tower bolt of extruded section 150 mm long and fixed complete all as specifed and directed

S&F stainless steel barrel tower bolt of extruded section 200 mm long and fixed complete all as specifed and directed

S&F stainless steel 300 mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of stainless steel and fixed complete all as specifed and directed

S&F stainless steel handle of size 150 mm and fixed complete all as specifed and directed

S&F Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring 150mm long and fixed complete all as specifed and directed

S&F Mild steel hold fast made of flat iron conforming to 410-0 or Fe-310-0 compelete all as specified and directed

Preparing surfaces of wood and wood based materials, steel and iron work and treating back of chowkats area exc 0.1 Sqm and n.exc 0.5 Sqm each using tar or coal tar / black bituminous paint complete all as specified and directed

M&L PCC 1:3:6 type C1 (using 20 mm graded stone agg) as in coping including formwork for fixing of hold fast, sanitary fittings etc., complete specified and directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing the rubbish of the premises

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M & L cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate), 25 mm thick as in floors finished rough for floor finishes complete all as specified and directed

M & L glazed ceramic coloured tiles in vertical surfaces 450 x 300 x 6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick backing coat in cement mortar 1:4, all as specified and directed.

M & L vitrified Dark shade Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed

All as per item No 36 above but as in skirting/dado including 10 mm thick backing coat in cement mortar 1:4.

Rendering 10mm thick in Cement Mortar 1:3 mixed with water proofing compound at a rate of 3% by weight of cement finished even and smooth with out using extra cement, complete all as specified and as directed. (Note :- Water proofing compound is deemed included in the item)

M&L PCC type E2, 1:5:10 (using 40mm graded stone aggregate) in foundations, filling mass concrete as in sunken floor.

M&L PCC type C1, 1:3:6 (using 20mm graded stone aggregate), 75mm thick as in plinth protection complete all as specified and directed

M&L for Cement Concrete tile with grey cement & pigment 25cm x 25cm x 22mm thick machine pressed, set jointed and pointed in neat cement slurry in floors, and cut and pre-polished including 15 mm thick screed bed in C M 1:6 complete all as specified and directed

M&L PCC type D2, 1:4:8 (using 40mm graded stone aggregate), 75mm thick as in sub base complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed

Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, shelves complete all as specified and directed

.M&L RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in water tank levelling course /platform/Kitchen shelves and like supported walls including necessary use and waste of form work,exposed surface of concrete shall be finished even and smooth without using extra cement.

M&L for 10mm dia and over TMT bars cut to length, bent to shape reqd incl cranking, bending spirally for hooping, hooking ends and binding with incl MS wire annealed (not less than 0.9 mm dia) and securing with clips fixing as rungs for climbing up to the roof top complete all as specified and directed

S&F in repair brass chromium plated tubular towel rail 20mm dia D type 60cm long between flanges with chromium plated bracket and fixed complete all as specified and directed Make Prayag Jaquar or equivalent

S&F 500 lit capacity rotational moulded polythylene water storage tank hoisted and fixed complete including dismantling of RCC/ PVC tank complete all as specified and directed

Disconnecting existing tanks,setting aside(or lowering if required)for repairs,cleaning,etc.and hoisting if required reconnecting and refixing in position for 500 ltrs capacity tanks.

S&F in repair vitreous china WHB with pedestal pattern of size 460x350mm incl GI Brackets, CP brass waste coupling with check nut and washers, PVC connection and waste pipe of suitable to be complete all as specifed and directed Make Prayag cat part No 4656/ Jaquar/ Parryware/ CERA/ Hindware or equivalent

Taking down old Stainless steel plate rack and refixed to the wall with rawl plugs and screws all as directed by engr-in-Charge

S & F in repair 20mm stainless steel curtain rods with fixing brackets,stops, rollers etc complete all as specified by Engr In Charge.

S&F in repairs 125mm size brass chromium plated shower rose with swivel joints including fixing to steel/PVC pipes or unions. Make :Jaquar/SOMA/Leader/ Zoloto Parryware/Prayag

S&F in repair 15 mm bore CP Bib tap long body cast copper alloy fancy type crutch or butterfly handles screwed down for iron or for brass ferrule Make Prayag cat part No 8208/ Jaquar/ Parryware or equivalent

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces for sunken slab complete all as specified and directed

S & F in repair 15 mm bore pillar tap cast copper alloy fancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes Make Prayag cat part No 6302-N / Jaquar/ Parryware or equivalent

Supply & fix 15mm bore angular stop cock, chromium plated , fancy type, screwed for iron pipe or brass ferrule, and fixed in repairs complete all as specified and directed Make Prayag cat part No PR-544 / Jaquar/ Parryware or equivalent

S&F in repair 15 mm bore ,2 way CP Bib tap long body cast copper alloy fancy type crutch or butterfly handles screwed down for iron or for brass ferrule Make Prayag / Jaquar/ Parryware or equivalent

Cutting holes in brick walls in cement mortar for inserting GI pipe and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but n.exc one brick depth of embedded portion from the face of the jamb

S&F in repair low density polyethylene pipe (LDPE ) of presssure rating 6 Kg/ Sqcm of bore of pipe 40mmx750mm long

S & F in repair PVC (SWR) soil, waste and vent pipe 75mm with including suitable clamp (dia), Single Socketed, in any length with Rubber Ring Joint fixed to Wall or Laid in Trenches etc., including Taking down/up unserviceable Pipe, complete all as specified and as directed.

All as per Item No 62 above but 110mm bore (dia).

PVC (SWR) 75mm bore (dia), Bends, any radius with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed.

All as per Item No 64 above but 110mm bore (dia).

PVC (SWR) 75mm Bore (dia), Branch Piece, Single (Single Y) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed.

All as per Item No 66 above but 110mm bore (dia).

PVC (SWR) 75mm Bore (dia), junction Single (Single T) Equal or Unequal with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and as directed.

All as per Item No 68 above but 110mm bore (dia).

S & F PVC (SWR) vent cowl, size bore 75mm

S & F 8 mm glass conical wall mounted bathroom corner shelf set of three piece adjustable, rust proof, scratch resistant, fixed with ss screws with plugs etc complete all as specified and directed

M&L preparation of new wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M & L preparation of newly plastered ceiling and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification two or more coats over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment and washing, rubbing down and stopping of distempered and painted surfaces plastered ceiling and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification two or more coats over a coat of primer and over one mm thick interior putty complete all as specified.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and over one mm thick exterior putty over new surfaces complete all as specified and directed

M&L for complete removal of plastered surface of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and over one mm thick exterior putty old prepared surfaces complete all as specified and directed

M & L preparation of newly plastered wall and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification two or more coats over a coat of primer and over one mm thick interior putty complete all as specified.

M&L for complete removal of existing treatment and washing, rubbing down and stopping of distempered and painted surfaces plastered wall and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification two or more coats over a coat of primer and over one mm thick interior putty complete all as specified.

S & F PVC flushing cistern of 10 litres capacity, low or high level with valveless syphonic action and float value, pull knob including brackets, PVC connection, PVC flush pipe 32 mm dia etc., complete, fixed in repairs. Make : Prayag cat part No 501/Jaquar/ Parryware/ CERA/ Hindware

S&F in repairs Vitreous china wash down water closet pan (Pedestal pattern) white 'P' trap (excluding fixing bolts, flushing cistern and flush pipe), and fixed in position all as directed by Engr-in-Charge. Make : Prayag cat part No 4019 /Jaquar/ Parryware/ CERA/ Hindware

S & F in repair Vitreous china squatting pan "Orissa " pattern including P or S trap of size 580X440 mm white with intergral foot rests, excluding flushing cistern including setting the trap and pan in cement / lime concrete all as directed & making good to the disturbed floors and as directed by Engr-in-Charge Make : Prayag cat part No 4055 /Jaquar/ Parryware/ CERA/ Hindware

Supply and fixing PVC Water closet Seat Cover white or Black closed pattern with flat bottom and cover with PVC, aluminium or MS chromium plated hinge devises etc incl fixing in repair Make : Prayag cat part No-514 /Jaquar/ Parryware/ CERA/ Hindware

Supply and fixing in repair 15mm dia CP health faucet with 1 Mtr long flexible tube with necessary fittings. Make Prayag cat part No BEA-87 /Jaquar/ Parryware/ CERA/ Hindware

S&F in repair PVC (SWR) floor trap, dia of outlet 75mm plain with grating, including jointing, with solvent cement complete all as specified and directed

S & F sheet glass of ordinary quality 4 mm thick and glazing complete with beads fixed with screws in aluminium shutter square exc 0.5sqm in each pane complete all as specified and directed

S & F sheet glass of ordinary quality 4 mm thick and glazing complete with beads fixed with screws in aluminium shutter square n. exc 0.5sqm in each pane complete all as specified and directed

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, including fixing in Aluminium side hung window shutters complete all as specified and directed

S & F framed work such as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled/ welded for fixing of steel sheeting, hinges or other covering fixing complete with Fe-410-W (Gde-E-250-quality-A) including two coat of synthetic enamel paint over a coat of primer complete all as specified and directed

M&L for complete removal of existing WPT course (i.e) bituminous felt broken tiles mud phaska including removing grown vegetation roots etc or any other kind of treatment surface over roof slab and cleaning of surface with wire brushes removing of unsolvent materials and depositing of the same as directed at a distance n.exc 50m applying water proofing treatment on horizondal or vertical surface by applying oil bound bitumen primer @ 0.20 Kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4 Kg/Sqm reinforced with non woven polyster matt weighing not less than 160 gms/Sqm having softening point not less than 150 centigrade,having tensile strength of 650 N/Sqcm in longitudinal and transverse direction respectively of the reinforcement-tearing strength of 180 N by torch application including minimum 10cm side over laps and 15 cm end lap torch sealed and bounded and applying a coat of blown bitumen 90/15 over and below the membrane @ 1.20kg/sqm in drying over the membrane finished with solar reflective bituminous aluminium paint after cleaning the surfaces by removing dust,dirt etc,as per manufacturers instructions and all as directed.

M&L Avg 25 mm thick plain cement concrete 1:2:4, type B-0 bring up to the slope to 1 in 75 by providing light weight materials such as cinder,light weight concrete etc as required.

Rendering 5 mm thick in cement mortar 1:3 mixed with water proofing compound at the rate of 3% by weight of cement on roof surfaces while concrete is green. (Note : WPC is deemed included in the item)

Supply only integral water proofing compound all as directed

S & F Ball valve 20 mm dia, high pressure of PTMT, with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight-455gms) Make Pyayag/supreme or equivalent

S & F Ball valve 20 mm dia fixed in repair, high pressure of PTMT, with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight -455gms) Make Prayag/supreme or equivalent

M& L Post constructional Antitermite treatment, along external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre incl drilling and plugging holes etc in apron complete all as specified and directed.

M & L Post constructional Antitermite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.

Supply and fix Powder coated aluminium grills (Pattern DG-102 with weight, not less than 3.131 Kg/sqm) for windows, ventilators, etc., including joining cleats etc complete all as specified and directed.

S & F powder coated (50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified and directed.

S & F powder coated (50 micron) aluminium window and ventilator shutter, side hung type without sash bars, aluminium sections weighing 1.05 kg/m including necessary joining cleats, glazing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screw, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.), including fixing of SS wirecloth with necessary fixing arrangements (SS wire cloth is measured and paid seperately) complete all as specified

S& F for pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specifec and directed

S& F for pressed steel frames 125x 60mm for doors with one or more rebates including necessary fixing lugs, MS hinges for internal door, spring operated hinges for outer side door , lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed

M&L as in repairs 20mm thick Granite slab work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite providing suitable hole for LPG gas pipe line complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and 32mm CP coupling and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S & F Figured glass, pin head type, 4 mm thick and glazing complete with beads fixed with screws in aluminium shutter square n. exc 0.5sqm in each pane.

Removing of old detoriated plaster surface from Chajja/lintel/fins/facia, fixing of Chicken mesh of size 13mm opening size and wire dia 0.6mm with staples or nailing, after cleaning the surface, apply a coat of cement slurry 10 mm thick rendering in two layers in Cement Mortar 1:4 mixed with water proofing compound at a rate of 3% by weight of cement over including finished even and smooth with out using extra cement, and match the surface with existing including necessary formwork and scafolding arrangements at a height of bldg G+2 level complete all as specified and directed.

Repair, cleaning dirt/calcium deposit and refixing old CP health faucet with replacement of washers with necessary fittings and fixtures complete all as specified and directed by engr in charge

Taking down sub main wiring any description along with PVC conduit/Casing capping/wooden batten/metal conduit and made good the disturbed surface all as specified.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store, refixing/hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified.

Taking down Exhaust fan, dismantling blades and removing fan and blades to store, refixing only Exhaust fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

M & L for painting of ceiling fans/exhaust fan any sweep, complete in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete fittings such as switches,sockets,ceiling rose, pendents, regulators etc complete as ordered and removing retrieyed materials and making good the disturbed surface of wall, floors, ceiling etc. complete all as specified and directed.

Point wiring complete with 1.50 sqmm single core PVC FRLS insulated un-sheathed 1100 volts grade copper conductor single core multi stranded drawn through with and including non metallic rigid PVC conduit accessories concealed on walls, surface on ceiling etc provision of 1.6 mm thick MS pressed steel terminal boxes concealed in wall with 3 mm thick hylam sheet for housing switiches, sockets, fan regulators etc., including one run of 1.50 sqmm PVC insulated copper conductor for continious earth wire and connected to common earth dolly for one light point controlled by one switch.all as specified and as directed.

All as per item No. 112 but one light point controlled by two, 2 way switches.

All as per item No. 112 but one ceiling fan / exhaust point controlled by one switch.

All as per item No. 112 but one socket point on same board with other switches.

All as per item No. 112 one socket point on Independent board.

All as per item No. 112 one call bell point controlled by one bell push.

All as per item No 112 above but for one 3/5 pin socket outlet 15 Amps independent with cable 2.5 Sq mm size all as specified and directed.

M & L Switch piano, flush type,single pole one way 5 Amp all as specified and directed.

S&F switch piano flush type, single pole 2 way.5 Amp all as specified and directed.

Supply and fix switch combination 2 in 1, 5 amps 240 volts flush type all as specified and directed.

M & L Switch piano ,flush type single pole one way 15 Amp all as specified and directed.

M & L Socket out let 2 in 1,3 pin ,15 Amp flush type all as specified and directed.

M&L Bell push 5 Amps 230 Volts all as specified and and directed.

M&L Call bell 230 volts single pole A/C fancy type Ding Dong bell and including taking out unserviceable old bell all as specified and directed.

M&L Ceiling rose surface PVC insulated three plates "JUMBO' type 240 volts all as specified and directed.

M&L Switch socket combination 2 in 1, 3 pin,5 and 15 Amp flush type 240 volts universal all as specified and directed.

M&L Fan regulator electronic type with 5 step control suitable for 1200/1400 mm ceiling fan complete all as specified and directed.

M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F LED Lamp 5W (Make - Havells Cat Part No-LHLDEUEEMC8R005 or equivallent) all as specified and directed.

Supply and fix Industrial type sheet steel enclosure with metal clad plug and socket single pole neutral and earth plug and socket 20 Amp MCB SP controlled by and including one number of 20 Amps MCB SP complete all as specified and directed .

S&F in replacement of Wall mounted light fitting LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver with 20 W LED (4 ft) lamp including disconnecting, removing, and connecting into electric circuit and testing. ( Make - Havells,Cat Part No : LUMILINEBS20WLED865SPCWH or equivalent in Phillips,Wipro)

S&F in replacement of Wall mounted light fitting LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver with 18 W LED (4 ft) lamp including disconnecting removing, and connecting into electric circuit and testing. ( Make - Havells,Cat Part No : LUMILINEBS18WLED865SPCWH or equivalent in Phillips,Wipro)

S & F replacement LED light fitting 9 watt, basic all purpose surface mounted LED batten with polycarbonate housing & integrated electronic driver with 9 Watt LED 6000K (2 ft) lamp complete all as per Cat part No.LUMILINEBS9WLED865SPCWH of Havells Make or equivalent in Phillips,Wipro )

S & F down light LED decorative hexagon bulk head light fitting 10 Watt LED lamp complete all as per Cat part No.HEXAFT10WLED857SSYMBOPC of Havells Make or equivalent in Phillips,Wipro)

S&F in replacement of security light fitting LED luminares New generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP65 roadway luminaire with high power LED as light source with 25W LED 6000K lamp including disconecting, removing, and connecting into electric circuit and testing. ( Make: Havells, Cat Part No : NDURASUNDOWNSL25WLED765PASYBOPCIHD or Equivalent in Phillips,Wipro)

M&L GI Bracket bend to shape in cold or hot 25 mm bore medium grade and 1.50 M long with suitable MS clamps and nuts bolts etc, to fixing security light fittings to Bldgs complete all as specified and directed.

Cutting chases, pinning in making good to facings where required and pointing in cement morter 1:3 to ends or edges of landings steps, chills, sunshades, shelves, lintels etc and cutting chases for concealed conduit wiring etc. and making good cutting exceeding 10cm but not exceeding 20cm girth complete all as specified and directed.

M&L Sub main wiring two run of 6 sqmm single core PVC insulated unsheathed cable single core multistranded copper conductor 1100 volts grade drawn through suitable size of PVC conduit and conduit accessories concealed on floor/wall/ surface on ceiling with suitable clamps/saddles including one run of 6 sqmm PVC insulated copper cable for continuous earth conductor connected to common earth dolly. Note : (i) The above quoted rates are inclusive of cutting and chases. (ii) Two run of cable , PVC conduit and one run of earth conductor shall be one unit.

M&L Circuit Sub main wiring 2 x 4.0 Sqmm single core FRLS PVC insulated unsheathed cable single core multistranded copper conductor 1100 volts grade drawn through with and including suitable size of PVC conduit and conduit accessories fixed on concealed with suitable clamps/saddles including one run of 4.0 sqmm FRLS PVC insulated copper cable for continuous earth conductor connected to common earth dolly. Note : (i) The above quoted rates are inclusive of cutting and chases. (ii) Two run of cable , PVC conduit and one run of earth conductor shall be one unit.

Taking down the existing unserviceable Main switch /DB -TPN/SPN from its position for fixing of new DB and making good the disturbed surface all as directed by Engr-in-Charge.

Supply & fixing of sheet metal enclosure MCB DB TPN 6 ways double door type including 100 Amps MCB TPN ,16 KA incomer with suitable bus bar all as specified and directed .

Supply & fixing of Sheet metal enclosure with distribution board Double Door 230 volts SPN 8 way with suitable Bus bar and provision for MCBs/ isolators fixed on wall and connecting with all connections all as directed by Engr in charge

S & F MCB SPN 16-32 Amps, 'C' Curve, 10 KA , 240V all as specified and as directed.

S & F MCB Single pole 6-32 amps, 'C' Curve, 10 KA , 240V all as specified and as directed.

Material and labour for earthing complete with GI plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below ground level connected to earth wire 4.0 mm GI strip means of bolts, nuts, washers of galvanized all as shown in electrical plate No.3 of SSR Part-I including necessary excavation and earth work, PCC 1:3:6 type C1 chamber, RCC cover in 50mm thick 1:2:4 type B1 with 8mm CTD 140mm centre to centre with suitable handle, watering pipe 20mm dia light grade pipe with funnel, charcoal salt connected to earthing test point all as specified including testing and commissioning on completion. Note : The GI wire 4.0 mm and GI earth protection pipe 15 mm upto 7.5 mtr lenght is included in the unit rate and beyond 7.5 mtr shall be measured and paid seperately.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc. as required GI wire 4.0 mm thick for inter connecting of earth electrodes.

Supply and lay GI pipe 15 mm dia, medium grade, for protection of earth continuity conductor

Disconnecting, removing carefully the Tamper proof electronic meter and handing over in AGE E/M store yard for refixing all as directed by Engineer-in-Charge.

Fixing only tamper proof electronic meter any type and rating retrieved against item above in the same location or at new location within same Bldg.

Supply and fix electric water heater,storage type, with stain steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, including grouted with suitable size of nut & bolts,making good the surface, PVC connection piece complete all as specified and directed

Supply and Laying of CPVC 16mm pipe SDR 11 & Plain CPVC SDR 11 fittings on wall/Ceiling or laying in floors complete all as specified and directed.

Supply and Fixing Angle stop valve of PTMT any colour high pressure screwed for CPVC Pipe and fixed all as specified and directed.

Kaadosh Real Estates Pvt Ltd

DANUSH INTERIORS AND CONTRACTORS

DJ Group

prabhakaran

Banyan Engineers and Contractors

M/s KM Marimuthu Achary