Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.8 LAccepted-AOC | ₹23.8 L Quoted ₹24.3 L | L1 | Accepted-AOC Lowest |
| 2 | L2₹25.0 LRejected-AOC B 134 GANESH MURTHI NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | ₹25.0 L | L2 | Rejected-AOC Not Lowest |
| 3 | L3₹26.1 LRejected-AOC | ₹26.1 L | L3 | Rejected-AOC Not Lowest |
| 4 | L4₹26.7 LRejected-AOC 58 CHANDRALOK BUILDING MAYO HOSPITAL ROAD NAGPUR 440 018 | NAGPUR | MAHARASHTRA | 440018 | ₹26.7 L | L4 | Rejected-AOC Not Lowest |
| Sl No | Description | Qty | Unit | M/s Vinod Yadav L1 | Paragon Electrotechnics L4 | M/S J J ENTERPRISES L3 | Shri Sai Enterprises L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Comprehensive maintenance for diesel engine driven generating set by carrying out routine 'A' check of the engine complete for smooth functioning all as per manufacturer's instructions and as directed for 320 KVA DG Set installed at MRS including attending to under mentioned jobs to ensure its satisfactory performance:-
Existing DG -01 No Make : Kirloskar
Note : Quoted Rates are deemed to be for carrying out A checks as under :- | 10 | Each Job | 1,300 ₹13,000 | 1,500 ₹15,000 | 1,600 ₹16,000 | 1,400 ₹14,000 |
| 1.01Checking the fan belt and adjusting tension | |||||||
| 1.02Checking the fuel and oil filter | |||||||
| 1.03Checking the air filter including cleaning and refixing | |||||||
| 1.04Checking of FIP oil level | |||||||
| 1.05Tightening the base bolts and nuts | |||||||
| 1.06Checking the coupling bolts and adjustment checking the self starter and Dynamo | |||||||
| 1.07Checking the battery distilled water levels and topping upto the required level. | |||||||
| 1.08Checking the panels (Manual as well as AMF) attached to the DG set for loose connections, defects if any in the panel Board and replacement of spares all as directed. | |||||||
| 1.09Checking the anti vibration mounting and adjusting the bolt. | |||||||
Updated dates
Tender Value
₹23.9 L
EMD Value
₹47,800
Closing Date
12 Nov 2025, 6:00 pmClosed
GE (AF) Amla
GE (AF) Amla, Amla Depot Distt Betul (MP) 460553
COMPREHENSIVE MAINTENANCE TO DG SET, EOT CRANE VOLTAGE STABILIZERS/BATTERY BANKS AND BATTERY CHARGER INCLUDING CONNECTED MISC WORKS AT AFS AMLA
2025_MES_734245_1
8664/E8 OF 2025-2026
Open Tender
Electrical and Maintenance Works
335 days
GE (AF) Amla
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE (AF) Amla
₹47,800
Yes
29 Dec 2025
8 Oct 2025
14 Nov 2025
8 Oct 2025
12 Nov 2025
22 Oct 2025
8 Oct 2025 - 15 Oct 2025
Amount
Checking the fan belt and adjusting tension
Checking the fuel and oil filter
Checking the air filter including cleaning and refixing
Checking of FIP oil level
Tightening the base bolts and nuts
Checking the coupling bolts and adjustment checking the self starter and Dynamo
Checking the battery distilled water levels and topping upto the required level.
Checking the panels (Manual as well as AMF) attached to the DG set for loose connections, defects if any in the panel Board and replacement of spares all as directed.
Checking the anti vibration mounting and adjusting the bolt.
Checking the radiator and radiator hose and arresting leak if any
Checking the engine oil level and topping upto the required level
NOTES:- (i) Control switches , MCCB's, contactors, multi display meters , Engine control unit shall be out of scope of the item of work and the rate quoted shall be exlusive for servicing/ maintenance of the above item of work.
(ii) Servicing of DG set alongwith connected Alternator and Panel Board including 'A' check of the Engine shall be carried out once in every month (Except during the month when 'B' check is carried out) as directed by the Engineer-in-Charge and the Contractor shall carry out periodical inspections during the maintenenace period and shall be responsible for the smooth functioning of the DG set for a period of 30 days from the date of service and shall also attend all the maintenence / breakdown repairs as and when required in that period except in case of major repairs.
(iii) Spare parts required for replacement during the maintenance period shall be measured and paid separately at supply only rates and cost of labour for fixing these spares shall be deemed to be inluded in the rate quoted .
(iv) Cost of all consumables required during the maintenance period shall be deemed to be included in the rate quoted for this item.
(v) List of checks to be carriedout under 'A' check is attached to the Particular specifications.
NOTES:- (i) Control switches , MCCB's, contactors, multi display meters , Engine control unit shall be out of scope of the item of work and the rate quoted shall be exlusive for servicing/ maintenance of the above item of work.
(ii) 'B' check shall be carried out once in every six months or 250 hours of running of DG Set whichever is earlier. Servicing of DG Set alonwith connected Alternator and Panel Board including items covered in 'A' check of the Engine shall also be carried out in that month as directed by the Engineer-in-charge and the Contractor shall carry out periodical inspections during the maintenance period and he shall be responsible for the smooth functioning of the DG Set for a period of 30 days from the date of service and shall also attend all the maintenance / breakdown repairs as and when required in that period except in case of Major repairs.
(iii) Spare parts , engine oil and radiator coolant oil required during the maintenance period shall be measured and paid seperatly at supply only rates and cost of labour for fixing these spares/filling of oils shall be deemed to be included in the rate quoted for this item.
(iv) Cost of all consumables, diesel / oil filters etc., required during the maintenance period shall be deemed to be included in the rate quoted for this item.
(v) List of checks to be carriedout under 'B' check is attached to the Particular specifications.
Checking the tappet clearance and adjustment of valve including replacement of tappet gasket for DG Set of capacity 320 KVA.
All as per Item No 35 above but DG Set of capacity 160 KVA
All as per Item No 35 above but DG Set of capacity 100 to 125 KVA
All as per Item No 35 above but DG Set of capacity 25 to 40 KVA
Supply only fuel filter pre and secondary including rubber gasket for DG set of capacity 320 KVA (Cost of replacement deemed to be included in the maintenance part of the DG set)
All as per item No 39 above but DG Set of capacity 160 KVA
All as per item No 39 above but DG Set of capacity 82.5 to 125 KVA
All as per item No 39 above but DG Set of capacity 10 to 40 KVA
Supply only lube oil filter including rubber gasket for DG set of capacity 320 KVA (Cost of replacement deemed to be included in the maintenance part of the DG set)
All as per item No 43 above but DG Set of capacity 160 KVA
All as per item No 43 above but DG Set of capacity 82.5 to 125 KVA
All as per item No 43 above but DG Set of capacity 10 to 40 KVA
Supply only air filter element including rubber gasket for DG set of capacity 320 KVA (Cost of replacement deemed to be included in the maintenance part of the DG set )
All as per item No 47 above but DG Set of capacity 160 KVA
All as per item No 47 above but DG Set of capacity 82.5 to 125 KVA
All as per item No 47 above but DG Set of capacity 10 to 40 KVA
Supply only fan belt of existing size for DG set of capacity 320 KVA(Cost of replacement deemed to be included in the maintenance part of the DG set)
All as per item No 51 above but DG Set of capacity 160 KVA
All as per item No 51 above but DG Set of capacity 82.5 to 125 KVA
All as per item No 51 above but DG Set of capacity 10 to 40 KVA
Supply only Radiator hose with clip of existing size for DG set of capacity 320 KVA (Cost of replacement deemed to be included in the maintenance part of the DG set)
All as per item No 55 above but DG Set of capacity 160 KVA
All as per item No 55 above but DG Set of capacity 100 to 125 KVA
All as per item No 55 above but DG Set of capacity 10 to 40 KVA
Supply only rubber coupling of existing size for DG set of capacity 320 KVA (Cost of replacement deemed to be included in the maintenance part of the DG set)
All as per item No 59 above but DG Set of capacity 160 KVA
All as per item No 59 above but DG Set of capacity 100 to 125 KVA
All as per item No 59 above but DG Set of capacity 10 to 40 KVA
Supply and toping up the items for the DG set Engine oil 20 W 40 (Cost of replacement deemed to be included in the maintenance part of the DG set)
All as per item No 63 above but Distilled water
All as per item No 63 above but Coolant
All as per item No 63 above but Benzo bolt with washer
All as per item No 63 above but Jubilee clamp for fuel pipe
All as per item No 63 above but Fuel Flexible pipe with brass or GM adaptor
All as per item No 63 above but Oil Flexible pipe with brass or GM adaptor
All as per item No 63 above but Flexible reinforced pressure pipe 3/8" dia.
All as per item No 63 above but Flexible reinforced pressure pipe 1/2" dia.
All as per item No 63 above but Flexible reinforced pressure pipe 1" dia.
Supply and Cladding with glass/rock wool and aluminium sheets of exhaust manifold for DG set of capacity 320 KVA including removing of existing asbestos rope or any other type of insulation.
All as per item No 73 above but DG Set of capacity 160 KVA
All as per item No 73 above but DG Set of capacity 100 to 125 KVA
All as per item No 73 above but DG Set of capacity 10 to 40 KVA
Supply and fixing of Expansion bellow for exhaust manifold for DG set of capacity 320 KVA includung removing of existing
All as per item No 77 above but DG Set of capacity 160 KVA
All as per item No 77 above but DG Set of capacity 100 to 125 KVA
All as per item No 77 above but DG Set of capacity 10 to 40 KVA
Draining the engine oil from sump removing the sump cover cleaning the sludge and refixing the same including replacement sump gasket and filling oil for the Gen set of capacity 320 KVA as per manufactures instructions
All as per item No 81 above but DG Set of capacity 160 KVA
All as per item No 81 above but DG Set of capacity 82.5 to 125 KVA
All as per item No 81 above but DG Set of capacity 10 to 40 KVA
Dismantling the fuel pump from the DG Set of capacity 320 KVA Engine, transportng to the service center and complete servicing and overhauling of the pump including replacement of service kit ,element, delivery valve, plunger, copper washer etc all as required including re-calibration, refixing and testing complete.
All as per item No 85 above but DG Set of capacity 160 KVA
All as per item No 85 above but DG Set of capacity 82.5 to 125 KVA
All as per item No 85 above but DG Set of capacity 10 to 40 KVA
Dismantling the DG Set of capacity 320 KVA water pump from the Engine and supply and fixing new water pump of existing size and testing complete.
All As per item No 89 above but DG Set of capacity 160 KVA
All As per item No 89 above but DG Set of capacity 82.5 to 125 KVA
All As per item No 89 above but DG Set of capacity 10 to 40 KVA
Dismantling the DG Set of capacity 320 KVA fuel AC pump from the Engine and supply and fixing new fuel AC pump of existing size and testing complete.
All as per item No 93 above but DG Set of capacity 160 KVA
All as per item No 93 above but DG Set of capacity 82.5 to 125 KVA
All as per item No 93 above but DG Set of capacity 10 to 40 KVA
Draining out the diesel tank, cleaning / washing out the sludge and re-filling with diesel for DG set of capacity 320 KVA.
All as per item No 97 above but DG Set of capacity 160 KVA
All as per item No 97 above but DG Set of capacity 82.5 to 125 KVA
All as per item No 97 above but DG Set of capacity 10 to 40 KVA
Taking down DG Set of capacity 320 KVA radiator, servicing, cleaning of with suitable reagent, washing thoroughly,arresting leakage if any by welding / brazing and refixing the same (Necessary coolant and distilled water required will be measured and paid seperately under Sch item Nos 60 herein before).
All as per item No 101 above but DG Set of capacity 160 KVA
All as per item No 101 above but DG Set of capacity 100 to 125 KVA
All as per item No 101 above but DG Set of capacity 10 to 40 KVA
Removing and replacing of Fuel injector pipe for DG set of capacity 320 KVA
All as per item No 105 above but DG Set of capacity 160 KVA
All as per item No 105 above but DG Set of capacity 100 to 125 KVA
All as per item No 105 above but DG Set of capacity 10 to 40 KVA
Heating and varnishing of alternator for DG set of capacity 320 KVA
All as per item No 109 above but DG Set of capacity 160 KVA
All as per item No 109 above but DG Set of capacity 100 to 125 KVA
All as per item No 109 above but DG Set of capacity 10 to 40 KVA
Supply and replacement of anti vibration mounting pad for DG set of capacity 320 KVA including removing of existing .
All as per item No 113 above but DG Set of capacity 160 KVA
All as per item No 113 above but DG Set of capacity 100 to 125 KVA
All as per item No 113 above but DG Set of capacity 10 to 40 KVA
Supply and replacement of the Oil pressure gauge. for DG set any capacity
All as per item No 117 above but Battery terminal socket GM including soldering.
All as per item No 117 above but Battery terminal leads complete with brass connector
All as per item No 117 above but Radiator Cap
All as per item No 117 above but Fuel Tank Cap with Lock
All as per item No 117 above but Door lock of any type and size complete Set.
All as per item No 117 above but Door gasket of any type and size complete set.
All as per item No 117 above but Carbon brushes for charging alternator
All as per item No 117 above but PT Pump repair Kit
All as per item No 117 above but Replacement of AVR Suitable for 320 KVA Alternators
All as per item No 117 above but Replacement of AVR Suitable for 160 KVA Alternators
All as per item No 117 above but Replacement of AVR Suitable for 100 KVA Alternators
All as per item No 117 above but Replacement of AVR Suitable for 25 to 40 KVA Alternators
Supply and replacement of the AC Ammeter digital type for DG set control panel of any capacity
All as per item No 130 above but AC Volt meter digital type 0 to 500 volt.
All as per item No 130 above but Frequency meter
All as per item No 130 above but DC Volt meter 0 to 24 V
All as per item No 130 above but lgnition switch with key for on, off and run.
All as per item No 130 above but DIN Rail for fixing MCB
All as per item No 130 above but MCB SP 6-32 Amps
All as per item No 130 above but MCB 4P 63 Amps
All as per item No 130 above but Indicator lamp for panel board as per existing size.
All as per item No 130 above but No Volt Coil suitable for 3 phase power contactor 160-200 Amps ratings
All as per item No 130 above but Dash board pilot lamp.
All as per item No 130 above but Control cable 2.5 sqmm copper Multistranded.
All as per item No 130 above but Control cable 4 sqmm copper Multistranded.
All as per item No 130 above but Toggle Switch 15 Amps
All as per item No 130 above but AMF Relay 12 Volt DC
All as per item No 130 above but Battery charging alternator 12 Volt
All as per item No 130 above but Temperature Gauge with sensor
All as per item No 130 above but Electronic governor
All as per item No 130 above but RPM Meter
All as per item No 130 above but Door hinges
All as per item No 130 above but Oil Pressure Sensor
All as per item No 130 above but AMF Panel relay
All as per item No 130 above but Battery charger AC to DC
All as per item No 130 above but Single phase preventor
All as per item No 130 above but Speed control sensor
All as per item No 130 above but Electro Timer with NO/NC
All as per item No 130 above but ON/OFF Delay Timer, 240V
All as per item No 130 above but Gen Set Control Unit
All as per item No 130 above but Push button type Start / Stop Switch,
All as per item No 130 above but Auto/Manual Switch,
All as per item No 130 above but Fuel gauge as per existing
Removing dismantling and overhauling of 12 volt starter motor, replacement of armature coil, field coil, bush bearing etc to make the starter motor serviceable complete all as specified and as directed.
Removing dismantling and overhauling of 24 volt starter motor, replacement of armature coil, field coil, bush bearing etc to make the starter motor serviceable complete all as specified and as directed.
Removing and replacing the old unserviceable lead acid battery of size 12 Volt , 100 AH of reputed make including charging and shifting & depositing old battery to MES all as specified as directed ( Make : Amaron, Exide)
Removing and replacing the old unserviceable lead acid battery of size 12 Volt , 150 AH of reputed make including charging and shifting & depositing old battery to MES all as specified as directed ( Make : Amaron, Exide)
Removing and replacing the old unserviceable lead acid battery of size 12 Volt , 180 AH of reputed make including charging and shifting & depositing old battery to MES all as specified as directed ( Make : Amaron, Exide)
Supply & fix in repair MCCB 03 Pole, 415 V, Rating 200 Amp 36 KA Breaking capacity , 50 Hz with thermal magnetic release complete all as specified .
Supply & fix in repair MCCB 03 Pole, 415 V, Rating 63 Amp, 16 KA, 50 Hz with thermal magnetic release .
S&F in repair contactor coils and spare kits as per the capacity MCX11-12 Cat no CS94009 of L&T or Equivalent
All as per item No 171 above but Coil for contactors MCX21-22 Cat no ST91291F000 of L&T or Equivalent
All as per item No 171 above but Coil for contactors MCX31-34 Cat no. CS94196 of L&T or Equivalent
All as per item No 171 above but Spare contact kit MCX11 Cat no. CS94077 of L&T or Equivalent
All as per item No 171 above but Spare contact kit MCX12 Cat no. CS94078 of L&T or Equivalent
All as per item No 171 above but Spare contact kit MCX21 Cat no. CS94330 of L&T or Equivalent
All as per item No 171 above but Spare contact kit MCX22 Cat no. CS94331 of L&T or Equivalent
All as per item No 171 above but Spare contact kit MCX31 Cat no. CS94081 of L&T or Equivalent
All as per item No 171 above but Spare contact kit MCX32 Cat no. CS94082 of L&T or Equivalent
All as per item No 171 above but Spare contact kit MCX33 Cat no. CS94083 of L&T or Equivalent
All as per item No 171 above but Spare contact kit MCX34 Cat no. CS94084 of L&T or Equivalent
M&L for plate earthing with galvanised mild steel plate electrode 60 cm x 60 cm x 6mm thick burried directly in ground vertically (in earth pit not less than 2.25 m below normal ground level) with top edge of the earth p;late at a depth not less than 1.5 m below niormal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl GI earth strip 25x4 mm bolted (with GI nuts, bolts and check nuts) and riveted to earth plate at one end and connected to metallic bodies of HT/LT equipments etc at the other end including 32mm GI light grade pipe with all fittings from top of electrode to body of equipment fixed with iron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate and RCC cover complete all specified and shown in electrical plate No 3 of SSR Pt-I including earthing resistence testing report submit in sub division by the contractor complete all as specified and directed.
EOT Crane Repair, maitnenace and servicing including replacement of spares for electrically operated flameproof overhead travelling EOT cranes, single/double girded, gear type with electric motor for long travel, cross travle hoisted creap, cotrol panels, protective panels, gear box, gantry rail, main switches, resistance coil, wire rope drum , brake control , cable and witches, resistance coil, wire ropes, rope drum, brake control cable and switches, servicing Break drum cleaning, all electrical connection checking and connecting. Lubricating of all moving parts, cleaning of DSI, proper aligmnment of cable trolley, festoon cable system etc of capacity 2 Ton all as specified and directed.
Note : a) The items also includes the cost of grease, oil for oiling the parts, oil seal any type, nutbolts & washers, soldering & welding works, cleaning of IT contorl panels board by hot blower. The other major parts replaced shall be measured and paid separately. b) The contractor shall be maintain maintenance register of each crane as per the direction of the Engineer-in-Charge(c) Check to make sure all bolts are tight and lockwashers are compressed 9d) If required touch up the crane with existing paint wherever necessary (e) Check clevis pin, gotter pin (gotter pin should be faully wrapped around clevis pin) and check clevis bolt and hard wares (f) Check for cracks, puts and or grooves of wheels if any of this conditions exist wheels should be repalced (g) Ensure correct position on bridge to match specifiend cantilivers (h) All safety features shall be checked properly including checking of HRC fuses or MCBs or MCCbs O/L Relays single phase preventor under voltage protection, amin incommeer circuit breaker/contactors, limit switches, brake clutches & other switch gears & control.(j) Any break down of EOT will be attended by the contractor within 24 hrs on receipt of complaints from MES through telephonic / written message. (b) Load testing will be done quarterly basis Serviceable certificate of crane will be submitted by the contractor
All as per item No. 183 above but 05/06 Ton of capacity EOT crane
Maintenance / servicing / load testing of HOT Crane of Capacity 02 Ton Capacity complete to ensure smooth and trouble free operation all as specified and as directed. Note :- (a) Any break down of HOT will be attended by the contractor within 24 hrs on receipt of complaints from MES through telephonic / written message. (b) Serviceable certificate of crane will be submitted by the contractor . (c) load test will be done quarterly basis certificate submit to AGE E/M office by the contractor)
All as per item No 185 above but HOT 05 Ton Capacity
Supply onlyGear wheel of EOT crane for replacement during the process of Servicing/ repair the EOT Crane flame proof type of 02 TON Capacity :-
All as per item No 187 above but Flame Proof Rotary Limit switch
All as per item No 187 above but Coupling for EOT crane ( cap 02 Ton )
All as per item No 187 above but Electrical Contactor 25 Amp
All as per item No 187 above but Over Load Relay, 2.5-6 Amp
Supply only Gear wheel of EOT crane for replacement during the process of Servicing/ repair the EOT Crane flame proof type of 05 TON Capacity :-
All as per item No 192 above but Flame Proof Rotary Limit switch
All as per item No 192 above but Coupling for EOT crane ( cap 05 Ton )
All as per item No 192 above but Electrical Contactor 25 Amp
All as per item No 192 above but Over Load Relay, 2.5-6 Amp
Taking down old unserviceable main steel wire rope after disconnecting from counter weight, pulley and car cabin and supply and fix main steel wire rope 13mm dia, ungalvanised, 8/19 construction in and including necessery connection with counter weight, pulley and car cabin with clamps, nuts, bolts and washers etc complete all as directed by engr-in-charge. Make - Usha Martin
Disconnecting gear box assembly and taking out gear wheel and replacement of other worn out parts, oil seal and gear oil after overhaulling including lath work as required at site re-assembly and refixing the same and the testing complete for 2 to 6 Ton capacity EOT Crane.
Dismantaling and step opening of burnt out electric motor of capacity up to 7 HP three phase 415 Volts and rewinding with supper enameled copper wire of existing gauge, number of turns, insulating and heat varnishing, greasing complete including replacement of bushes, bearing check nut, and other required parts and applying two coats of synthetic enamel paint over a coat of red oxide primer to external surface of motor and testing complete all as specified and directed.
Material and labour for removing old paint from EOT Crane of 0.5 Ton Capacity with all components such as grinders, motor with the help of paint remover, cleaning by scrapping and repainting the surfaces by spray paiting with synthetic enammel paint of existing colour and writing work comlete all as directed.
VOLTAGE STABLIZER Labour only for Maintenance & servicing of Voltage stabiliser of the 75/100 KVA capacity complete. Make : Power wear / Volina . (Note : - (a) Opening top cover carefully without damaging any part and detecting the fault/defects in core by testing . (b) Test Report of voltage stabilizer will be submitted by the contractor . )
All as per item No 201 above but 150 KVA . Make : Power wear / Volina .
All as per item No 201 above but 250 KVA .Make : Power wear / Volina .
Disconnection of LT cable connection & earthing strip , taking down to Voltage stabiliser of the 75/100 KVA capacity for repair work/labour only for replacement of barrier assembly/ limbs complete. Make : Power wear / Volina . (Note : - (a) Transportation of voltage stabiliser from site to workshop for repair and transporting back after repair. (b) Opening top cover carefully without damaging any part and detecting the fault/defects in core by testing . (c) Reassembling, reinstallation at original location or as directed including restoration of electrical connection and testing on load complete all as specified and as directed. (d) Test Report of voltage stabilizer will be submitted by the contractor.
All as per item No 204 above but 150 KVA . Make : Power wear / Volina .
All as per item No 204 above but 250 KVA .Make : Power wear / Volina .
Supply onlyMicro toggle switches with manual increase/decrease push switches required for replacement during the process of Servicing / Repair the voltage stabiliser capacity 75 to 250 KVA Make : Kaycee / Essan / Gay Lord.
All as per item no 207 above but Indicator of Main/High & Low voltage Make : Harry / Vaishno
All as per item no 207 above but Push button Make: Kaycee / Essan / Gay Lord.
All as per item no 207 above but Auto manual switches Make: Kaycee / Essan / Gay Lord.
Supply only Electronic sensing card PCB with copper wiring ( FRLS ) required for replacement during the process of Servicing / Repair the voltage stabiliser capacity 75/100 KVA Make : AE / INTEC / Volina / Blue hill / Vinitee or Make approval by GE .
All as per item No 211 above but Rotary mechanism of dimmer through armature motor Make: AE / Volina / Vinitee or Make approval by GE.
All as per item No 211 above but Dimmer with super enamel copper wire complete as per existing size / type / gauge.
All as per item No 211 above but Servo Motor single phase, 230 volts, 50 Hz , Make : AE / Volina / Vinitee or Make approval by GE .
Supply only Electronic sensing card PCB with copper wiring ( FRLS ) required for replacement during the process of Servicing / Repair the voltage stabiliser capacity 150 KVA Make : AE / INTEC / Volina / Blue hill / Vinitee or Make approval by GE .
All as per Item No 215 above but Rotary mechanism of dimmer through armature motor Make: AE / Volina / Vinitee or Make approval by GE .
All as per Item No 215 above but Dimmer with super enamel copper wire complete as per existing size / type / gauge.
All as per Item No 215 above but Servo Motor single phase, 230 volts, 50 Hz , Make : AE / Volina / Vinitee or Make approval by GE .
Supply only Electronic sensing card PCB with copper wiring required for replacement during the process of Servicing / Repair the voltage stabiliser capacity 250 KVA . Make : AE / INTEC / Volina / Blue hill / Vinitee or Make approval by GE .
All as per item No 219 above but Rotary mechanism of dimmer through armature motor Make : AE / Volina / Vinitee or Make approval by GE .
All as per item No 219 above but Dimmer with super enamel copper wire complete as per existing size / type / gauge .
All as per item No 219 above but Servo Motor single phase , 230 volts, 50 Hz , Make : AE / Volina / Vinitee or Make approval by GE .
M&L for Oil filtration of Servo voltage stabilizers to achieve di-electric strength more than 40 KV with suitable filtration machine at specified temperature.
Toping up of new Stabilizer oil Make : BP / Savita / Power oil . Note : Value of oil should not less than dielectric strength 50 KV .
M&L for circuit control copper wiring as per existing gauge voltage stabilizers of the capacitie 75/100 KVA .
All as per Item No 225 above but capacity 150 KVA
All as per Item No 225 above but capacity 250 KVA
Supply and fix in repair MCCB 04 pole, 415 V rating 400 Amps, 36 KA, 50 Hz with thermal magnetic release.
Supply and fix in repair MCCB 04 pole, 415 V rating 200 Amps, 25 KA, 50 Hz with thermal magnetic release.
Supply and fixing in repair of Volt/Amp/PF meter, 230 volt, 50 Hz including wiring and testing complete. Make - L&T/AE.
Supply and fixing in repair Rotary switch 5 Amp for R.Y.B phases of OEM make for the voltage stabilizer complete all as specified and directed.
Supply and fixing in repair rubber gasket as per existing capacity of voltage stabilizers complete all as specified and directed.
Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.
Shri Sai Enterprises (BID ID -3462231)
M/S J J ENTERPRISES (BID ID -3465123)
Paragon Electrotechnics (BID ID -3462499)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.35 MB
FinalTD.pdf
Tender Documents • 0.73 MB
BOQ_822154.xls
BOQ • 1.09 MB
Download all tender documents and submit your bid